MXR-8P-8P(72) [HRS]
Circular Connector;
| 型号： | MXR-8P-8P(72) |
| 厂家： | 
HRS |
| 描述： | Circular Connector |
| 文件： | 总6页 (文件大小：471K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Miniature push-pull connectors with ground function
MXR Series
Features
1. User friendly lock mechanism
The single action push-pull lock function allows
quick connections and disconnections as well as
high density mounting.
2. Grounding function for FCC compliance
Metal, outer shell provides stable contact for
grounding.
3. Sequential contact structure
A sequential mating type is available. This version
allows for the contacts to mate in a sequenced
order.
Product Specifications
Number of contacts
Rated current
2A
3
4
6
8
Rated current
Number of contacts
Rated voltage
AC 100, DC 140V
Ratings
3
4
6
8
Rated voltage
Operating temperature range
Storage temperature range
-25 to +85ç
-10 to +60ç
Items
Specifications
Conditions
1. Contact resistance
A maximum of 20mø
Measured at DC 1A
2. Insulation resistance A minimum of 1,000Mø
Measured at DC 100V
AC 300V for 1minute
3. Withstanding voltage No flashover or dielectric breakdown.
No electrical discontinuity for 10µs or
10 to 55 Hz/cycle, amplitude : 0.75mm, 3 axis directions,
2 hours each
4. Vibration resistance
greater.
No electrical discontinuity for 10µs or
Acceleration : 490m/s2, duration : 11ms, 3 axis directions,
3 times each
5. Shock resistance
greater.
6. Mating cycles
Contact resistance : a maximum of 40mø
1,000 times
-55ç : 30 minutes
Normal temperature : 10 to 15
➝
Insulation resistance :
a minimum of 1,000Mø
7. Temperature cycle
minutes
85ç : 30 minutes
Normal temperature :
➝
➝
10 to 15 minutes, left for 5 cycles
Insulation resistance :
a minimum of 10Mø (at high humidities)
a minimum of 100Mø (when dry)
Temperature : 40°C, relative humidity : 90 to 95%,
left for 96 hours
8. Moisture resistance
Materials / Finish
Part
Material
Aluminum alloy
PBT resin
Finish
Nickel plating
Remarks
----------------
UL94V-0
Shell
Insulator
Contact
----------------
Copper alloy
Gold plating, partial gold plating
----------------
1
2018.1e
MXR Series●Miniature push-pull connectors with ground function
Product number structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
MXR - 8 P A - 3 P B (**)
❶
❷
❸
❹
❺
❻
❼
❽
Series name : MXR Series
q
w
Shell size : Indicates the outer shell diameter at the mating end.
Shell classification : Classified as follows
e
P : Plug
R : Receptacle
Shell modification : The letters A, B, C, D, E, etc. indicate modifications of the shell form.
Pin arrangement : Indicated by the number of pins
r
t
Pin form : Classified as follows
P : Male contacts
y
S : Female contacts
Pin modification : The letters A, B, C, D, E, etc. indicate modifications of the pin form.
u
i
Special specifications : A two-digit number is added to indicate other specifications, such as (01), (02), (03)...
Plug
1 2
3
A
(Representative shape example)
MXR-8P-8P(71)
Part No
HRS No.
A
ØB
5
Weight
8g
Bushing
Black
Remarks
MXR-8PA-3PB(71)
MXR-8PA-4PB(71)
MXR-8PA-6PB(71)
MXR-8P-8P(71)
127-0003-6 71
127-0004-9 71
127-0005-1 71
127-0002-3 71
127-0002-3 72
47
Sequenced construction
----------------
----------------
50
8
9g
MXR-8P-8P(72)
White
Note : Cable pull force, twisting strength and other characteristics may differ, depending on cable specifications and structure.
Please evaluate under the actual conditions prior the use.
Receptacle (Secured with hex nut for mounting)
Solder termination
Panel
Guide
1
2
3
9
19
A
(Representative shape example)
MXR-8RA-8S(71)
Part No.
HRS No.
Weight
3.5g
A
Remarks
----------------
----------------
----------------
----------------
MXR-8RA-3S(71)
MXR-8RA-4S(71)
MXR-8RA-6S(71)
MXR-8RA-8S(71)
127-0121-2 71
127-0122-5 71
127-0123-8 71
127-0124-0 71
19.3
20.4
2
MXR Series●Miniature push-pull connectors with ground function
Receptacle (Flange type)
Dip termination
M2.6∞±.40
Panel
Guide
2
1
3
2
11
2±
1±.0
10
6
(Representative example)
MXR-8R-8SA(71)
Part No.
HRS No.
Weight
3.5g
Remarks
MXR-8R-3SA(71)
MXR-8R-4SA(71)
MXR-8R-6SA(71)
MXR-8R-8SA(71)
127-0101-5 71
127-0103-0 71
127-0104-3 71
127-0102-8 71
with gold-plated contacts
Layout dimensions for dip post contacts
3 pin
4 pin
1.9± ±.±0
1.9± ±.±0
2± ±.±0
4.1± ±.±0
±.8± ±.±0
4.1± ±.±0
2.1± ±.±0
2.3± ±.±0
2.3± ±.±0
±.4± ±.±0
1.7± ±.±0
1.7± ±.±0
2.9± ±.±0
1.2± ±.±0
2± ±.±0
1.2± ±.±0
2± ±.±0
1.0± ±.±0
1.0± ±.±0
8 pin
6 pin
3.41± ±.±0
1.76± ±.±0
1.76± ±.±0
2± ±.±0
2± ±.±0
1.9± ±.±0
1.9± ±.±0
1.4± ±.±0
4.1± ±.±0
1.2± ±.±0
4.1± ±.±0
2.20± ±.±0
1± ±.±0
2.±3± ±.±0
±.0± ±.±0
±.77± ±.±0
3.0± ±.±0
2.6± ±.±0
2.2± ±.±0
±.98± ±.±0
2.19± ±.±0
±.98± ±.±0
2.19± ±.±0
2± ±.±0
2± ±.±0
Remarks : Figures are views from the mating side of the receptacle.
Marks ▼ show the position of the guide.
3
MXR Series●Miniature push-pull connectors with ground function
Wiring and Assembly Procedure
MXR-8PA-3PB(71), MXR-8PA-4PB(71), MXR-8PA-6PB(71)
Cable
Cable bushing
Plug body
P shell unit
Clamp
7 or greater
Spanner spacing of 9.5
3
15
Work Procedure
1. Pass the cable through the components in this order : 1. cable bushing, 2. plug body, 3. clamp fitting. Then perform
the cable end processing.
2. Solder the wires to the P shell unit.
3. Align the protruding portion of the clamp with the recessed portion of the P shell unit and mount.
4. Align the plug and cable sheath strip position, then tighten the plug body to the screw portion of the P shell unit
with a torque of 1 N•m.
Note that to prevent loosening, an application of Locktight 263 manufactured by HENKEL JAPAN LTD. is
recommended.
5. Put the cable bushing over the clamp body to complete the job.
MXR-8P-8P(**)
P shell unit
Cable bushing
Cable
Clamp fitting
Plug body
2 or greater
Boss
Set screw
Spanner spacing of 10
3
18
Work Procedure
1. Pass the cable through the components in this order : 1. cable bushing, 2. plug body. Then perform the cable end
processing.
2. Solder the wires to the P shell unit.
3. Fasten the clamp fitting to the cable with the cable crimping tool (HR10A-TC-04).
4. Tighten the clamp body to the screw portion of the P shell unit with a torque of 1 N•m.
Note that to prevent loosening, an application of Locktighe 263 manufactured by HENKEL JAPAN LTD. is
recommended.
5. Tighten the set screw so that the tip falls into one of the two bosses of the clamp fitting.
Note that a tightening torque of 0.3 N•m. is specified.
6. Put the cable bushing over the clamp body to complete the job.
4
MXR Series●Miniature push-pull connectors with ground function
Dimensions for receptacle mounting holes
Guide
position
3+0.1
0
Guide position
10.5 0.05
Panel thickness 1 to 4mm
Panel thickness Max 1.6mm
(Jam Nut Type)
(Flange Type)
NOTES :
1. Above figures are views from the mating side of the receptacle.
Also note that the ▼ symbol indicates the guide position.
Applicable Tools
Type
Part No.
HRS No.
Applicable Connectors
All plug products
Tightening jig
MXR-8P-T01
HR10A-TC-04
150-0092-3
150-0058-5
Cable crimping tool
MXR-8P-8P (**)
MXR-8P-T01
HR10A-TC-04
Pin arrangement and electrical specifications
Number of contacts
3
4
6
8
Pin arrangement
Withstanding voltage
Current capacity
300V AC for 1minute
2A
Insulation resistance
Contact resistance
Solder pot diameter
1,000Mø or greater at 100V DC
20mø or less at 1A DC
0.9mm dia.
NOTES :
1. Above figures are views from the mating side of the receptacle.
Also note that the ▼ symbol indicates the guide position.
2. The withstand voltage value indicates the test voltage.
The connector should normally be used at less than 100V AC or 140V DC.
5
MXR Series●Miniature push-pull connectors with ground function
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
Phone : +1-978-662-5255
http://www.hirose.com/eu/
GERMANY:
GERMANY:
FRANCE:
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
Voisins le Bretonneux, France
Phone : +33-1-85764886
Fax : +33-1-85764823
http://www.hirose.com/eu/
http://www.hirose.com/eu/
UNITED KINGDOM:
CHINA:
CHINA:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th
Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
CHINA:
HONG KONG:
TAIWAN:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7355
http://www.hirose.com/tw/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
KOREA:
SINGAPORE:
INDIA:
HIROSE KOREA CO.,LTD.
143, Gongdan 1-daero, Siheung-si,
Gyeonggi-do, 15084, Korea
Phone : +82-31-496-7000
Fax : +82-31-496-7100
http://www.hirose.co.kr/
HIROSE ELECTRIC SINGAPORE PTE. LTD.
03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C,
Singapore 079909
Phone : +65-6324-6113
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
65-6324-6123
Fax : +
http://www.hirose.com/sg/
http://www.hirose.com/sg/
INDIA:
MALAYSIA:
THAILAND:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Lepas Penang, 11950, Malaysia
Phone : +604-648-5536
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
Fax : +66-2-686-3433
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2018. Contents are subject to change without notice for the purpose of improvements.
6
相关型号：
©2020 ICPDF网 联系我们和版权申明