N.FL-R-SMT-1(60) [HRS]
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle;
| 型号： | N.FL-R-SMT-1(60) |
| 厂家： | 
HRS |
| 描述： | RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle |
| 文件： | 总6页 (文件大小：254K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height
N.FL Series
●Mated height comparison (With U.FL-LP(V) )
N.FL
U.FL-LP(V)
Fig.1
●N.FL Plug and Receptacle
■Features
1. Low profile
Nominal mated height is 1.4 mm (Max. 1.5 mm)
2
N.FL-LP-040*
2. Small size: 7.7 mm
Plug
3. Light weight
3.4
Cable
Receptacle : 14 mg
Plug
: 28 mg
4. Accepts high frequency transmission
of DC to 6 GHz.
V.S.W.R. = 1.3 max. (DC to 6 GHz)
5. Board placement with automatic equipment
N.FL-R-SMT-1
Receptacle
Receptacles are packaged in embossed carrier
tape and reel for automatic mounting.
Fig.2
6. Plugs are terminated with ultra-fine
coaxial (fluorinated resin insulated) cable.
7. Special tool for an extraction
8. Verification of the fully mated condition
Tactile click sensation confirms fully mated
condition, assuring complete electrical and
mechanical connection.
9. Halogen-free*(Receptacle, plug(HF type))
*As defined by IEC61249-2-21
Br-900 ppm maximum, Cl-900 ppm maximum,
Cl+Br combined - 1,500 ppm maximum
■Applications
Mobile phones, wireless communication devices,
electronic measuring instruments, GPS, wireless
LAN, Bluetooth and any application requiring high
frequency transmission using small coaxial
connectors.
1
2014.10w
N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height
■Specifications
-40°C to +90°C
(90% RH max.)
-30°C to +70°C
(90% RH max.)
Nominal characteristic impedance
50 ohms
Operating temperature range
Storage temperature range
Ratings
Frequency range
DC to 6 GHz
Item
Specification
Center contact: 25 m ohms max.
Outer contact: 25 m ohms max.
Conditions
1. Contact resistance
10 mA max.
2. Insulation resistance
3. Withstanding voltage
4. V.S.W.R.(Note)
500 M ohms min.
100V DC
No flashover or insulation breakdown
1.3max.
200V AC / 1 minute
DC to 6GHz
Contact resistance
Center contact: 30 m ohms max.
Outer contact: 30 m ohms max. 20 cycles
5. Durability
No damage, cracks, or parts dislocation
Frequency: 10 to 100 Hz, single amplitude of 1.5 mm
No electrical discontinuity of 1 µs or longer
No damage, cracks, or parts dislocation
2
6. Vibration
7. Shock
Acceleration: 59 m/s , in each of 3 axis
5 cycles
2
No electrical discontinuity of 1 µs or longer
No damage, cracks, or parts dislocation
Acceleration of 735 m/s , 11 ms continuous time
Waveform: sine half-wave, 3 cycles in each of the 3 axis
Insulation resistance: 100 M ohms min. (high humidity)
Insulation resistance: 500 M ohms min. (dry)
No damage, cracks, or parts dislocation
8. Humidity
96 hours at +40°C, and humidity of 95%
Temperature:-40°C/+5°C to +35°C/+90°C/+5°C to +35°C
Time: 30 min./ 5 min. max. / 30 min. / 5 min. max.
5 cycles
9. Temperature cycle
10. Salt spray test
No damage, cracks, or parts dislocation
No excessive corrosion
5% salt water solution, 48 hours
Note: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
* V.S.W.R. Measurement System
Measured as shown on the block diagram below.
Note1: N.FL Cable assembly (plug) is measured with SMA conversion
Network Analyzer
adapters mated with N.FL plugs at both ends of a 100cm coaxial
cable harness
Test Set
Test Port
Note2: N.FL receptacle, which is mounted on a 50 ohms glass epoxy
board, is measured with a SMA conversion adapter.
D.U.T Termination
Test Port Cable
■Materials / Finishes
●Plugs-Right Angle
Part
Material
Finish
Shell
Phosphor bronze
Phosphor bronze
Silver plated
Gold plated
Female center contact
Color: Black, UL94V-0
Color: Gray, UL94HB(HF type)
Insulator
PBT
●Receptacle
Part
Material
Finish
Shell
Phosphor bronze
Silver plated
Male center contact
Insulator
Brass
LCP
Gold plated
Color: Black, UL94V-0
2
N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height
■Cable Assembly(Plug)
N.FL-LP-040(06), N.FL-LP-040HF(06)(Applicable cable: outer diameter 0.81)
3.4
Ordering Information
[Plugs can be ordered only as terminated cable assemblies]
How To Specify Cable Assembly
[Double-ended cable assembly]
[Single-ended cable assembly]
L(mm)
L(mm)
Ordering Information
Ordering Information
Used Plug: N.FL-LP-040(06), N.FL-LP-040HF(06)
Double-
Ended
-
-
- -
TV A L
N.FL 2LP HF6 04N
「」
❶
❷
❸
❹
❺
❻
❼
Single-
Ended
-
-
- -
TV A L
N.FL LP HF6 04N
「」
❶
❷
❸
❹
❺
❻
❼
Standard tolerances for (L)
Series name
N.FL
❶
❷
(L)mm
Standard Tolerance(mm)
Assembly type
LP : Single ended
2LP : Double ended
*L=35 to 200
4
*L=200 to 500
*L=500 to 1000
L=Longer than 1000
8
12
Environmental compliant HF6 : Halogen-free plug
6 : Standard Plug
❸
1.5% of (L)
Cable type
Cable color
04N : 0.81mm dia. ultra-time coaxial cable
1:White 2:Black
❹
❺
❻
❼
Note: Minimum available length(L) is 35mm.
Cable outer conductor TV: Tin plated braided wire
Total length (mm) Length(L)
3
N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Heightproduct)
■Receptacle
GND
B
Recommended PCB
GND
GND
mounting pattern
No conductive
GND
traces in this area
SIG
Ø2
SIG
0.8
0.6
1.9
3.8
0.6
2.6
3
All dimensions: mm
RoHS
Part No.
HRS No.
Packaging
N.FL-R-SMT-1(60)
N.FL-R-SMT-1(80)
331-0332-3 60
331-0332-3 80
Reel (5,000 pcs/reel)
Reel (10,000 pcs/reel)
●Embossed Carrier Tape Dimensions (IEC 60286-3 compliant)
Embossed Carrier tape Dimensions
(N.FL-R-SMT-1(60) 8mm pitch)
Reel Dimensions
13.5
Material：PS(Black)
Unreeling direction
2
4
A
8
A
（
SCALE FREE
）
(N.FL-R-SMT-1(80) 4mm pitch)
2
Unreeling direction
2
4
All dimensions: mm
4
4
N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Heightproduct)
■Conversion Adapters
●SMA Conversion Adapter (N.FL / U.FL side jack - SMA side plug)
(10.7)
8HEX
All dimensions: mm
Note: The FL side mating portions has a lower lock retention
Part No.
HRS No.
RoHS
force than the regular product, therefore, cannot be used
HRMP-U.FLJ(40)
311-0300-2 40
for purposes other than performance measurements.
Note: Applicable to both N.FL and U.FL.
●SMA Conversion Adapter (N.FL / U.FL side plug - SMA side jack)
14.05
6
(4.05)
5.6
1/4-36UNS-2A
All dimensions: mm
HRS No. RoHS
311-0301-5 40
Part No.
Note: The FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
HRMJ-U.FLP(40)
Note: Applicable to both N.FL and U.FL.
●SMA Conversion Adapter
(18.3)
(4)
6
5.5
1/4-36UNS-2A
All dimensions: mm
HRS No. RoHS
311-0423-2
Note: When mating with corresponding part (N.FL-R-
SMT-1) must be pressed down and held to make
complete connection.
Part No.
HRMJ-N.FLP-ST5
12.9
(7.9)
■Receptacle Inspection Adapter
Used for inspecting the performance
parameters of the cable assembly.
7HEX
5
(4.4)
1
M5∞0.5
All dimensions: mm
HRS No. RoHS
331-0466-0
Part No.
U.FL-R-1
Note: Applicable to both N.FL and U.FL.
(12.9)
J A P A N
Plug mating tool
This tool is used for mating a plug.
For distinction with
W.FL-LP-IN.
All dimensions: mm
Part No.
HRS No.
331-0334-9
RoHS
U.FL-LP-IN
90
50
Plug extraction tool
U. FL/
This jig is used for extraction from a mating condition.
All dimensions: mm
Part No.
U.FL-LP(V)-N-2
Note: Applicable to all the U.FL-LP(V)-040, U.FL-LP-062 and N.FL.
HRS No.
RoHS
331-0493-2
5
N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height
■Usage Precautions
1. Plug
• Unmating Insert the end of an extraction tool into a space between a plug and receptacle, and pull up
the tool in the perpendicular to a mounting surface of a receptacle, as shown in the figure.
●Recomended the use of the extraction tool for unmating.
U.FL-LP(V)-N-2
Extraction tool
Any attempt of unmating by pulling on the cable may
N.FL-LP-040
(1) Mating / unmating
Plug
result in damage to the mechanical / electrical performance.
• Mating
Do not attempt to insert on an extreme angle.
N.FL-R-SMT-1
Receptacle
N.FL-LP-040
2.9N max.
Plug
(2) Pull forces on the
cable after connectors
are mated
Do not apply any pull forces after the bending
of the cable.
N.FL-R-SMT-1
Receptacle
(3) Precautions
Do not twist connectors excessively during mating / unmating.
2. Receptacle
250 ç max. for
10 seconds
[
]
ç
260
240
220
200
180
160
140
120
100
80
230ç
220ç
Preheat
(130 to 180ç)
(1) Recommended reflow
temperature profile
120 seconds max.
50 seconds max.
60 seconds max.
Time
q The temperature profile indicates the board surface temperature at the point of contacts with the connector
leads.
w In individual applications the actual temperature may vary, depending on the solder paste type, volume /
thickness and board size / thickness. Consult your solder paste and equipment manufacturer for the
detailed recommendations.
(2) Manual soldering
Soldering iron temperature: 350°C, Soldering time: for 5 seconds max.
(3) Recommended metal
mask thickness
0.1 mm to 0.12 mm
2 times
(4) Reflow cycles
3. Operating environment and storage conditions
The connectors are not designed to operate in the following environments:
• Exposed to a excessive amounts of fine particles and dust
• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive
gasses.
(1) Operating environment
• Environments having large rapid variations in temperature.
Store in the Hirose Electric packaging.
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board
mounting surface.
(2) Storage conditions -
Receptacle
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 10/2014. Contents are subject to change without notice for the purpose of improvements.
6
相关型号：
N.FL-R-SMT-1(80)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明