RP34-SC-TP [HRS]
Small I/O connectors for AC adapters;
| 型号： | RP34-SC-TP |
| 厂家： | 
HRS |
| 描述： | Small I/O connectors for AC adapters |
| 文件： | 总12页 (文件大小：623K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Small I/O connectors for AC adapters
RP34 Series
Features
1. Superior mating operability
A snap-and-lock style allows easy mating/
unmating.
2. Cable direction is variable
The three-position, right-angled plug makes it
possible to arrange the cable to the left or right,
offering flexible wiring options depending on your
requirement.
3. Sequential contact mating
Designed with sequential contact mating, one pin
makes contact with its counterpart sooner than
the others and establishes a securely grounded
connection.
4. Easy plug assembly
A snap-together case eliminates the need for
screws to fasten the case and helps provide for a
quick plug assembly.
5. Variations
Items
Number of contacts
3 or, 4
Plug : Straight, right angle
Receptacle : Right angle
Crimp
Connector type
Plug termination version
Receptacle termination version PCB dip
Receptacle mounting method PCB dip
Product Specifications
Rated current 3A
Ratings
Operating temperature range -10 to +60
℃
Rated voltage AC30V DC42V
Storage temperature range
-10 to +60
,
℃
Items
Specifications
Conditions
1. Contact resistance 30mø max
Measured at DC 1A
2. Insulation
1,000Mø min
resistance
Measured at DC 100V
3. Withstanding
No flashover or dielectric breakdown.
AC 150V for 1 minute
voltage
4. Vibration
resistance
10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis directions,
No electrical discontinuity for 10µs or longer.
2 hours each
Acceleration : 490m/s2, duration : 11ms, 3 axis directions,
5. Shock resistance No electrical discontinuity for 10µs or longer.
6. Mating Cycles Contact resistance : 60mø max.
3 cycles each
1,000 times
-55ç : 30 minutes Normal temperature : 10 to 15
➝
7. Temperature cycle Insulation resistance : 100Mø min.
minutes 85ç : 30 minutes Normal Temperature :
➝ ➝
10 to 15 minutes, left for 5 cycles
Insulation resistance:
8. Moisture
Temperature : 40ç, relative humidity : 90 to 95%, left for
96 hours
10Mø min (at high humidities).
resistance
100Mø min (when dry).
Materials / Finish
Items
Material
Polycarbonate resin
Brass
Vinyl chloride resin
PBT resin
Finish
――――
――――
――――
――――
Tin plating
Silver plating
Remarks
UL94V-0
――――
――――
UL94V-0
――――
――――
Exterior, insulator
Plug
Clamp
Bushing
Exterior, insulator
Male contact
Receptacle
Steel
Brass
Crimped female
contact
Female contact
Phosphor bronze
Silver plating
――――
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2018.7w
RP34 Series●Small plastic connectors for AC adapters
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Connector
RP34 8 SP 3 S C (71)
-
-
Model name : RP34 Series
Shell size : The shell size is the outer diameter of the mating end of the plug.
Shell type
SP : Straight plug
P : Right-angled plug
R : Receptacle
Number of contacts :
Contact form
P : Male contact
S : Female contact
Contact termination method :
C : Crimp contact termination
DL : Right-angled dip method
Other specifications : A two-digit character is added to indicate other specifications.
Crimp contact
RP34 SC 2 1 2
-
-
Model name : RP34 Series
Contact type : SC = Crimped female contact
Contact packaging types :
1 : Loose piece contacts
2 : Reel contacts
Applicable wire :
1 : For 18 to 22 AWG
2 : For 24 to 28 AWG
Identification of plating : 2 : Silver plating
2
RP34 Series●Small plastic connectors for AC adapters
Straight plug
37.5
30.5
10
7.5
(This figure is a representative example.)
RP34-8SP-3SC(71)
Part No.
HRS No.
No. of contacts
A
Remarks
――――
RP34-8SP-3SC(71)
RP34-8SP-3SCD(71)
RP34-8SP-4SC(71)
113-5049-1 71
113-5061-7 71
113-5097-4 71
3
9.6
Mating key dependent type
4
11
――――
Note : Cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction.
We reccomend that you verify the suitability of the cable assembly before use or production.
Right-angled plug
25
18
10
RP34-8P-3SC(71)
1
3
2
(This figure is a representative example.)
Part No.
HRS No.
RP34-8P-3SC(71)
113-5041-0 71
Note : Cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction.
We recommend that you verify the suitability of the cable assembly before use or production.
3
RP34 Series●Small plastic connectors for AC adapters
Receptacle
11.3
A
1
2
3
B
(This figure is a representative example.)
RP34-8R-3PDL
Part No.
HRS No.
113-5042-2
113-5066-0
113-5098-7
No. of contacts
A
B
Remarks
――――
RP34-8R-3PDL
RP34-8R-3PDLD
RP34-8R-4PDL
3
4
10 11
11 12
Mating key dependent type
――――
Contact (female contact)
Applicable wire
size
Part No.
HRS No.
B
C
Remarks
RP34-SC-212
RP34-SC-112
RP34-SC-222
RP34-SC-122
113-5043-5 1.6 2.1 18 to 22 AWG Reel contacts
A_A
A
Loose piece
113-5076-4 1.6 2.1 18 to 22 AWG
contacts
B
113-5100-7 1.2 1.35 24 to 28 AWG Reel contacts
Loose piece
113-5102-2 1.2 1.35 24 to 28 AWG
contacts
A
Note : Loose piece contacts are packaged 100 pcs/pack and reel contacts are
available on 10,000 piece reel. Please order in full quantity packs or
reels.
8.7
Dip post arrangement for PCB layout
Positioning hole
(1 location)
Positioning hole
(1 location)
3 position
4.75
4 position
5.25 5.25
4.75
2
1
3
4
1.9
1.9
0.8
0.8
2.4 2.4
Remarks 1. The applicable PCB thickness is between 0.8 and 1.6mm.
2. A machining tolerance of 0.05 is recommended for the PCB layout.
3. The above figure shows the PCB side of the rack into which contact dip
posts will be inserted.
"
" mark indicates the plug interface mating side.
▼
4
RP34 Series●Small plastic connectors for AC adapters
Termination procedure
Straight plug
Operation procedure̶straight plug
1. First, pass the prepared cable through the bushing, and then crimp
and terminate the contacts.
Cable
Bushing
2. Assemble the crimped and terminated contacts into the contact holes
of the S-insulation P case.
Metal fitting for
clamping
At this time, please make sure that the crimped contacts are
securely engaged onto the contact holes of the S-insulation P case
by lightly pulling on the cable.
Cord tube
(A) or (B)
3. Crimp and fix the metal fitting for clamping with the applicable tool
(RP34-TC-01).
S-insulation
P case
4. Assemble the S-insulation P case, metal fitting for clamping, and
bushing onto the cord tube (A). The S-insulation P case can be
assembled in two ways, at 180° opposing angles. Please make sure
to select the orientation that is suitable for your purpose.
5. Finally, assemble the remaining cord tube (B). The assembly has
been completed.
Rightangle plug
Operation procedure̶right-angled plug
1. The right-angled plugs can be assembled in the same manner as
the straight plugs, and the S-insulation P case can be assembled
to the cord tube in one of two positions. 180° opposite each other.
Please make sure to select the orientation that is suitable for your
purpose.
Cover
S-insulation
P case
Cord tube
Applicable tools
Type
Items
Part No.
HRS No.
Applicable contact Applicable wire size
Automatic crimping press
CM-105C
901-0001-0
901-2025-2
901-2034-3
150-0074-1
150-0072-6
――――
RP34-SC-212
RP34-SC-222
――――
――――
18 to 22 AWG
24 to 28 AWG
――――
Machine
crimping
AP105-RP34-1
AP105-RP34-2
RP34-TC-01
RP34-SC-TP
Applicator
Cable crimping tool
Extraction tool
――――
――――
Cable crimping tool (RP34-TC-01)
(The handle shape shown above is a representative example.)
Automatic crimping press
(Type CM-105C)
5
RP34L Series●Small plastic connectors for AC adapters
Type RP34L
Product Specifications
Rated current
5A (when using 18 AWG)
Operating temperature range
Storage temperature range
−25 to +85
℃
℃
℃
Ratings
Rated voltage
AC30V, DC42V
−10 to +60
℃
Items
Specifications
Conditions
1. Contact resistance 30mø max.
Measured at DC 1A
2. Insulation
1,000Mø min.
resistance
Measured at DC 100V
3. Withstanding
voltage
No flashover or dielectric breakdown.
AC 150V for 1 minute
10 to 55Hz, half amplitude : 0.75mm, 3 axis directions,
2 hours each
4. Vibration proof
No electrical discontinuity 10µs or longer.
-55ç : 30 minutes Normal temperature : 10 to 15
➝
5. Temperature cycle Insulation resistance : 100Mø min
minutes +85ç : 30 minutes
➝ ➝
Normal Temperature : 10 to 15 minutes, 5 cycles
6. Corrosion
No corrosion that affects performance.
resistance
Left in 5% salt water solution for 48 hours
7. Mating Cycles
Contact resistance : 60mø max
5,000 times
Materials / Finish
Items
Material
Finish
Remarks
――――
UL94HB
Metal fitting
Phosphor bronze
Solder plating
Receptacle
(2position)
̶
Insulator
Contact
Polyamide resin
Brass
Black
Palladium plating
――――
UL94V-0
UL94HB
――――
――――
UL94V-0
――――
Exterior
Vinyl chloride resin
Polyamide resin
Phosphor bronze
Phosphor bronze
PPS resin
Black
Plug
(2 position)
̶
Insulator
Contact
Silver plating
Solder plating
Black
Metal fitting
Insulator
Contact
Receptacle
(3 position)
̶
Brass
Palladium plating
Polycarbonate resin
Vinyl chloride resin
PPS resin
Exterior
Black
UL94V-0
Plug
(3 position)
̶
Insulator
Contact
Phosphor bronze
Palladium plating
――――
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
RP34L 5 PA 2 SC (****)
-
-
Series name : RP34L
Contact type
PD : Male contact (dip)
SC : Female contact (crimped)
Shell : Indicates the shell form.
Type
Cable length : (****) may vary depending on
the cable.
Receptacle : R
Straight plug : PA
Right-angled plug : LP
Number of contacts : Shows the number.
2 or 3 contacts.
6
RP34L Series●Small plastic connectors for AC adapters
Receptacle
2 position
2 position
3 position
7
7.4
9.1
7
RP34L-5R-2PD(71)
3 position
Recommended panel opening dimensions (reference)
0
Recommended panel opening dimensions (reference)
0
7.5 +0.1
1.3 -0.1
0
7.4+0.1
0
-0.1
1.3
Panel
PCB
PCB
Panel
Plug
RP34L-5R-3PD(71)
PCB layout mounting dimensions
PCB layout dimension
4.3 0.05
(Mating interface side)
4.3 0.05
3.45 0.05
(Mating interface side)
3.45 0.05
Part No.
HRS No.
RP34L-5R-2PD(71) 113-5154-6 71
RP34L-5R-3PD(71) 113-5157-4 71
1.35 0.05
1.35 0.05
2.35 0.05
2.35 0.05
Plug
1857
A
7.8
6.1
1800
5.5
7.6
21.5
Board-in
crimping
contact
22.4
4.8
2.5
A
Bushing
A_A
6
Single-contact shielded cable
(Center conductor wires: 18 AWG, shielded cable: 18AWG or equivalent)
R3
RP34L-5PA-2SC(1857)(71)
29.7
23.1
6.2
4.8
(External shell)
RP34L-5PA-3SC(71)
17.6
11
7.2
10.9
3.7
Part No.
HRS No.
11.85
RP34L-5PA-2SC(1857)(71) 113-5153-3 71
RP34L-5PA-3SC(71)
RP34L-5LP-3SC(71)
113-5178-4 71
113-5161-1 71
RP34L-5LP-3SC(71)
7
RP34L Series●Small plastic connectors for AC adapters
Crimp contact
1.6
A
A
12.7
Section A_A
RP34L-SC1-212(01)
Part No.
HRS No.
RP34L-SC1-212(01)
113-5151-8 01
Applicable tools
Type
Part No.
HT-102/RP34L-SC1-212
HRS No.
150-0210-8
Applicable contact
RP34L-SC1-112(01)
Applicable cables
18 to 22 AWG
Manual crimping tools
Automatic
CM-105C
901-0001-0
--------------
--------------
Machine
crimping
crimping press
Applicator
AP105-RP34L-SC1-212
RP34-TC-01
901-2043-4
150-0074-1
150-0039-0
RP34L-SC1-212(01)
--------------
18 to 22 AWG
Cable crimping tool
Extraction tool
4
Ø
RP6-SC-TP
--------------
--------------
Assembly procedure (3 position plug)
Straight plug
1. First pass the prepared cable through the bushing, and then crimp
and terminate the contacts.
Cable
Bushing
2. Assemble the crimped and terminated contacts into the contact
holes of the S-insulation P case. At this time, please make sure that
the crimped contacts are securely engaged onto the contact holes
of the S-insulation P case by lightly pulling the cable. If you find an
erroneous wiring, insert the extractor (RP6-SC-TP) from the mating
side to pull out the contact from the termination side, and then re-
assemble.
Metal fitting for
clamping
(Mating section)
3. Crimp the metal fitting for clamping with the applicable tool (RP34-
TC-01).
4. Align and assemble the protrusion of the S-insulation P case to the
round hole of the cord tube (B).
(Round hole)
Cord tube (B)
Cord tube (A)
Cord tube (A)
5. Attach the mating section of the metal fitting for clamping to the
recess of the cord tube (B), and then assemble the bushing and
metal fitting for clamping onto the cord tube (B).
(Tab)
S-insulation P case
Cord tube (B)
6. Assemble the cord tube (A) onto the cord tube (B). At this time,
please make sure that the four tabs of the cord tube (B) rest on the
angled hole of the cord tube (A).
Right angle
1. Right-angled plugs can be assembled in the same manner as the
straight plugs.
13.7
2+0.5
0
S-insulation P case
2
Metal fitting for clamping
11
Cord tube
2
Bushing
Cable
Metal fitting for clamping
1
S-insulation P case
8
RP34L Series●Small plastic connectors for AC adapters
Precautions
1. To prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. This
will prevent any type of excessive load or force on the connector. For 2 position type, please support the external shell of the
receptacle. For 3 position type, please support the external shell of the plug.
See page 3 for details on recommended panel dimensions.
ꢀ
Receptacle
Receptacle
(External shell)
Plug
Panel
<2 position type>
<3 position type>
Panel
2. When mated together, do not apply a load of 30 N or more on the cable in the direction indicated by the arrows.
Please note that an excessive tensile stress may break the connectors.
3. This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may
cause tarnishing.
ꢀ・Dusty environments
ꢀ・Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on.
Example; In close proximity to factory exhaust, automotive emissions, etc.
ꢀ・Close to heaters, or in other areas marked by extreme temperature differences or high humidity.
ꢀ・Close to rubber products includes rubber adhesives.
The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins.
Storage
Packing state; Packed in original packing or equivalent container
Temperature -10 to +60ç
Humidity
85% Max
(It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any
temperature fluctuation)
Please use this products within 6 months of delivery.
(After 6 month, please check the solderbility before use)
“Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB.
9
RP34 Series●Small plastic connectors for AC adapters
:
MEMO
10
RP34 Series●Small plastic connectors for AC adapters
:
MEMO
11
RP34 Series●Small plastic connectors for AC adapters
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
Phone : +1-978-662-5255
http://www.hirose.com/eu/
GERMANY:
GERMANY:
FRANCE:
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
Voisins le Bretonneux, France
Phone : +33-1-85764886
Fax : +33-1-85764823
http://www.hirose.com/eu/
http://www.hirose.com/eu/
UNITED KINGDOM:
CHINA:
CHINA:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH
18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th
Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
CHINA:
HONG KONG:
TAIWAN:
HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7355
http://www.hirose.com/tw/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
KOREA:
SINGAPORE:
INDIA:
HIROSE KOREA CO.,LTD.
143, Gongdan 1-daero, Siheung-si,
Gyeonggi-do, 15084, Korea
Phone : +82-31-496-7000
Fax : +82-31-496-7100
http://www.hirose.co.kr/
HIROSE ELECTRIC SINGAPORE PTE. LTD.
03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C,
Singapore 079909
Phone : +65-6324-6113
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
65-6324-6123
Fax : +
http://www.hirose.com/sg/
http://www.hirose.com/sg/
INDIA:
MALAYSIA:
THAILAND:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Lepas Penang, 11950, Malaysia
Phone : +604-648-5536
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
Fax : +66-2-686-3433
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
RP34L-5P-3SC(71)
Telecom and Datacom Connector, 3 Contact(s), Female, Crimp Terminal, Plug, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明