RP34L-5R-2PD [HRS]
Low Profile Connectors for AC power supply; 薄型连接器适用于交流电源型号: | RP34L-5R-2PD |
厂家: | HRS |
描述: | Low Profile Connectors for AC power supply |
文件: | 总7页 (文件大小:366K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Profile Connectors for AC power supply
RP34L Series
Receptacle installed height
(3 pos.type)
(2 pos.type)
RP34L
Existing RP34
■Features
Mated dimensions
1. Low profile
Receptacles are designed with their installation heights to be
shorter than those of conventional RP34 series.
2. Space saving
Both 2 and 3 position receptacles are miniaturized to 7mm
length, resulting in a small board mounting area.
3. Snap-lock mechanism
Audible click when connector is fully mated.
4. Precise mated connection
RP34L-5PA-2SC(■■■■) & RP34L-5R-2PD
Secure hold of the plug on au 3 axis.
This 2 contact plug is an over-molded (i.e., cable-integrated form) type.
5. Sequence mating
Recommended cable diameter is 3.5mm dia
.
The 3 contact type has sequenced mating. One pin makes
contact as a ground terminal before the other contacts.
Mated dimensions
6. No Mismating
23.5
16.9
Two polarized keys prevent any insertion error.
7. Ease of Mating
An arrow on the top of the plug shows the proper direction for
insertion.
7
1.4
■Applications
Notebook PCs, portable remote terminals, AV equipment, etc.
RP34L-5PA-3SC & RP34L-5R-3PD
This 3-contact plug is a field assembly type.
Recommended cable diameter is 4mm dia.
2004.8
1
■Product Specifications
Current rating
Ratings
5A
Operating temp. range
Storage temp. range
-25ç~+85ç
-10ç~+60ç
Voltage rating
30V AC, 42A DC
Item
Specification
Conditions
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Vibration
1A DC
100V DC
150V AC/1 minute
30mø or max.
1000mø min.
No flashover or insulation breakdown
No electric disconnection of 10µs or more
10~55Hz, one-sided amplitude 0.75mm, 3 directions for 2hours, respectively
-55ç for 30 min.
for 30 min. normal temp. for 10~15 min. 5 cycles
normal temp. for 10~15 min. +85ç
/ /
5.Temperature cycle
6.Salt spray
Insulation resistance:100mø min.
No corrosions
/
5% salt water solution, 48 hours
5,000 mating / un-mating
7.Durability
Contact resistance:60mø max.
■Material
Component
Metal comp.
Material
Phosphor bronze
Nylon
Finish / Color
Solder-plating
Black
Remarks
---------------
2 pos.
2 pos.
3 pos.
Insulator
Contacts
Cover
UL94HB
---------------
Brass
Palladium-plating
Black
Vinyl chloride
Nylon
UL94V-0
UL94HB
---------------
---------------
Insulator
Contacts
Metal comp.
Insulator
Contacts
Black
Phosphor bronze
Phosphor bronze
PPS
Solder-plating
Black
UL94V-0
---------------
Brass
Palladium-plating
Black
Polycarbonate
Vinyl chloride
PPS
UL94V-0
UL94V-0
UL94V-0
---------------
Cover
Black
3 pos.
Insulator
Contacts
Black
Phosphor bronze
Palladium-plating
■Ordering information
RP34L - 5 PA - 2 SC (■■■■)
1
2
3
4
5
6
1
2
3
4
Series name: RP34L
Shell: Shell.size, 5
Number of contacts:
2, 3
5
6
Type:
Type of contact:
Receptacle: R
PD: through hole male contact
SC: crimp female contact
Assembled straight plug: P
Assembled right angle plug: LP
Cable ass'y, straight plug: PA
Cable length:(■■■■) depends on
each cable (mm).
2
■Receptacles
■2 pos.
RP34L-5R-2PD
Recommended panel cutout
PCB mounting pattern
Connector front
■3 pos.
RP34L-5R-3PD
Recommended panel cutout
PCB mounting pattern
Connector front
Part Number
RP34L-5R-2PD
RP34L-5R-3PD
CL No.
113-5154-6-00
113-5157-4-00
3
■Plugs
Cable assembly
■RP34L-5PA-2SC(1857)
Field assembly-Straight
■RP34L-5P-3SC
Field assembly-Right angle
■RP34L-5LP-3SC
Part Number
RP34L-5PA-2SC(1857)
RP34L-5P-3SC
CL No.
113-5153-3-00
113-5158-7-00
113-5161-1-00
RP34L-5LP-3SC
4
■Crimp contact
■RP34L-SC1-212(01)
Part Number
CL No.
RP34L-SC1-212(01)
113-5151-8-01
■Applicable Tools
TYPE
Part Number
HT-102/RP34L-SC1-212
CM-105
CL No.
Conformant terminal
RP34L-SC1-212(01)
--------------
Applicable conductor
AWG#18~#22
--------------
--------------
Manual crimping tool
901-0005-4
901-2043-4
150-0074-1
150-0039-0
Automatic
Crimper
Crimper body
AP105-RP34L-SC1-212
RP34-TC-01
RP34L-SC1-212(01)
--------------
AWG#18~#22
Ø4
Cable crimping tool
Drawing tool
RP6-SC-TP
--------------
--------------
5
■Assembly Instructions(3-Position Plug)
■Straight Plug
1. Slide the bushing over the cable.
2. Prepare the cable end and the conductors as shown.
3. Crimp the contacts to each conductor.
Verify the crimp dimensions.
Outer case
4. Insert each of the contacts into the insulator body.
Verify that the contact is secure by slightly pulling
on the conductor. Should the contacts require re-
insertion, use the tool RP6-SC-TP to remove them
(Inserted from the termination side).
5. Crimp the cable clamp over the cable at designated
dimension (Tool number:RP34-TC-01).
Outer case
6. Place the outer case on a flat surface , with inside facing up.
7. Carefully place the insulator body, clamp and the bushing
into corresponding indents and cut-outs in the outer case.
Verify correct location. (As shown on drawing)
Outer case
Note A: When placing all components in the case,
exercise caution as NOT to damage any of the
protruding snap.
Outer case
Note B: All components should fit easily, without use of
any force.
8. Carefully align the other outer case over all
components case. Do not force alignment.
9. Snap the case in place.
■Right Angle Plug
1. The right angle plug can also be assembled by
using the same procedure as the straight plug.
Insulator body
Outer case
Insulator body
6
■Precautions
1. Use the connector section with its panel held down so as not to have excessive load.For 2-contact type, hold the
outer shellsection of the receptacle, and for 3 contact type, the outer shell section of the plug.
Panel
<2-contact type>
<3-contact type>
2. After connector assembly, cable must not be pulled over 30N in the arrow-indicated direction. Be careful not to add
excessive tensile load because it will lead the damage of connectors.
7
相关型号:
RP34L-5R-3PD(71)
Telecom and Datacom Connector, 3 Contact(s), Male, Right Angle, Solder Terminal, Locking, Receptacle, ROHS COMPLIANT
HRS
RP34L-SC1-112(01)
Plastic connectors for AC adapter, Small and high power supply; HRS No: 113-5179-7 01; Connector Type: Wire; Contact Gender: Female; Applicable Cable: Conductor AWG#18 to #22; Termination Style: Crimping; Current Rating(Amps)(Max.): 5; Contact Mating Area Plating: Palladium; Operating Temperature Range (degrees C): -25 to 85; General Description: Crimping type female contact; Loose piece contact
HRS
RP3508ABLKGRNGRNNS
Pushbutton Switch, SPST, Momentary, 1.5A, 250VDC, Solder Terminal, Panel Mount-threaded
E-SWITCH
RP3508ABLKGRNNNS
Pushbutton Switch, SPST, Momentary, 1.5A, 250VDC, Solder Terminal, Panel Mount-threaded
E-SWITCH
©2020 ICPDF网 联系我们和版权申明