U.FL-LP-04N2-A-(L) [HRS]
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height;型号: | U.FL-LP-04N2-A-(L) |
厂家: | HRS |
描述: | Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height |
文件: | 总7页 (文件大小:258K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
U.FL Series
Up to 6GHz Transmission Speed
Mated Height Comparison
(With E.FL series)
E.FL-LP-040
E.FL-LP-066
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL
E.FL
ꢀSpace Factor of Mated Connector
ꢀFeatures
1.Extremely Small Occupied Mounting Area
Reduced board space requirement by 18% to 7.7mm2, when
compared with Hirose’s E.FL connectors.
2.Light Weight
Cable
U.FL-LP-040
Plug
Dia.0.81
One of the world’s lightest coaxial connectors.
Receptacle: 15.7mg
U.FL-R-SMT
Receptacle
3.Frequencies of Up to 6GHz
To meet the frequency requirements of a wide variety of
miniature equipment, these connectors offer high frequency
performance from DC to 6 GHz.
Cable
U.FL-LP-066
Plug
Dia.1.32
Dia.1.13
4.Board Placement with Automatic Equipment
Supplied on tape-and-reel packaging.
U.FL-R-SMT
Receptacle
5.Use of Ultra-fine Teflon Cable
Several of ultra-fine single and double shielded Teflon®
coaxial cables terminate to U.FL plug.
NEW
NEW
Cable
U.FL-LP(V)-040
Plug
6. Simple Disconnection
Dia.0.81
Dedicated tool allows reliable un-mating of the plug.
7.User Friendly Mating Operation
Tactile lock feeling ensures and confirms reliable connection.
U.FL-R-SMT
Receptacle
Cable
ꢀApplications
U.FL-LP-062
Plug
Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,
electronic measuring instruments, etc.
Dia.1.00
U.FL-R-SMT
Receptacle
NEW
Cable
U.FL-LP-088
Plug
Dia.1.37
U.FL-R-SMT
Receptacle
*Teflon is a registered trademark of DuPont.
2004.2
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Product Specifications
Nominal characteristic impedance
Voltage rating
50 ohms
60 V AC (rms)
DC to 6 GHz
Operating temperature range
Operating humidity
-40˚C to +90˚C
90% max.
Ratings
Frequency range
Item
Specification
Conditions
1. Contact resistance
Center: 20 m ohms max.
Outside: 10 m ohms max.
500 M ohms min.
10 mA max.
2. Insulation resistance
3. Withstanding voltage
4. V.S.W.R.*
100 V DC
No flashover or insulation breakdown.
Part No.
200 V AC / 1 minute
Up to 3GHz
1.3 Max
3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly
1.35 Max
1.3 Max
1.4 Max
1.5 Max
1.3 Max
1.4 Max
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly
U.FL-LP-068 dia.1.13mm Coaxial Cable Assembly
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly
U.FL-LP-062 dia.1mm Coaxial Cable Assembly
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly
1.3 Max
1.3 Max
1.3 Max
1.3 Max
1.3 Max
5. Center contact holding force 0.15 N min.
Measured with a Ø 0.475 pin gauge
6. Durability
Contact resistance
(mating/un-mating,
with corresponding plug)
7. Vibration
Center: 25 m ohms max.
Outside: 15 m ohms max.
30 cycles
Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration
of 59m/s2, for 5 cycles in the direction of each of the 3 axis.
Acceleration of 735 m/s2, 11ms duration, sine half-wave
waveform, 6 cycles in each of 3 axes.
No electrical discontinuity of 1µs min.
No damage, cracks or parts dislocation.
8. Shock
9. Humidity
No damage, cracks or parts dislocation.
(Steady state)
Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40ç and humidity of 95%.
Insulation resistance 500 M ohms min.(when dry)
10. Temperature cycle
No damage, cracks or parts dislocation.
Contact resistance:25 m ohms max. (Center)
15 m ohms max. (Outside)
Temperature:-40˚C +5 to +35˚C +90˚C +5 to +35˚C
/
/
/
Time:
30
5 max.
30
/
5 max.(Minutes)
/
/
5 cycles
11. Salt spray test
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement connection shown below.
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
ꢀMaterial/Finishes
Part
Material
Phosphor bronze
Brass
Finish
Remarks
—————
—————
—————
UL94V-0
Shell
Silver plated
Gold plated
Gold plated
Color: Black
Color: Beige
Male center contact
Female center contact
Phosphor bronze
Plug
Receptacle
PBT
LCP
Insulator
UL94V-0
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀReceptacles
Cut Out Prohibition Area
4
0.05
GND
GND
1.9 0.05
SIG
GND
Ø2
GND
SIG
1 0.05
3
2.6
0.6
Note 1: Receptacles of (01) specification are sold by the
bag with 100 pieces per bag.
Please order in pack units.
Note 2: Receptacles of (10) specification are sold by the
reel (which contains 2,500 pieces).
Recommended PCB mounting pattern
Please order in reel units.
Note 3: This area may be covered by insulating material.
Part No.
CL No.
Packaging
Weight (mg)
15.7/unit
U.FL-R-SMT(01)
U.FL-R-SMT(10)
331-0471-0-01
331-0471-0-10
Bag packaging (100 pieces/bag)
Reel packaging (2500 pieces/reel)
ꢀPackaging Specifications
Embossed Carrier Tape Dimensions
2
0.1
4 0.1
Center contact
0.3
1.6
Unreeling direction
8
0.1
Reel Dimensions
1.8
14
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀCable Assembly (Plug)
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL-LP-062
U.FL-LP-088
Part No.
4
3.4
5
4
4
2.5mm Max.
2.5mm Max.
2.0mm Max.
2.4mm Max.
2.4mm Max.
Mated Height
(2.4mm Nom.)
(2.4mm Nom.)
(1.9mm Nom.)
(2.3mm Nom.)
(2.3mm Nom.)
Dia. 1.13mm and
Dia. 1.32mm
Dia. 0.81mm
Coaxial cable
Dia. 0.81mm
Coaxial cable
Dia. 1mm
Dia. 1.37mm
Coaxial cable
Applicable
cable
Coaxial cable
Coaxial cable
53.7
59.1
34.8
45.5
71.7
Weight (mg)
ꢀCable Guide
Cable Specification
Jacket
Cable
Description
Type
Nominal attenuation
Inner
Conductor*
Dielectric
Outer
Conductor*
Nominal
Diameter
Dia.0.40
PFA
Diameter
Dia.0.81
PFA
Impedance
At 3GHz
At 6GHz
Dia.0.81mm
04
Coaxial Cable
7/0.05 SA
(AWG36)
7/0.08 SA
(AWG32)
7/0.08 SA
(AWG32)
7/0.071 SA
(AWG33)
7/0.102 SA
(AWG30)
Single
50 ohms
6.45dB/m
9.42dB/m
Shield SA
Single
Dia.1.13mm
068
Coaxial Cable
Dia.0.68
FEP
Dia.1.13
FEP
3.43dB/m
5.13dB/m
50 ohms
50 ohms
50 ohms
50 ohms
Shield SA[TA]
Double
[3.73dB/m]
[5.44dB/m]
Dia.1.32mm
066
Coaxial Cable
Dia.0.66
FEP
Dia.1.32
FEP
3.8dB/m
3.1dB/m
2.8dB/m
5.6dB/m
4.4dB/m
4.3dB/m
Shield TA
Tape, single
Shield TAT
Single
Dia.1mm
062
Coaxial Cable
Dia.0.62
FEP
Dia.1
FEP
Dia.1.37mm
088
Coaxial Cable
Dia.0.88
FEP
Dia.1.37
FEP
Shield TA
(data as provided by cable suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀHow to Specify Plug Cable Assembly
Dimensions of U.FL Series assembly products should be made as indicated below.
Single-Ended Cable Assembly
Double-Ended Cable Assembly
L
L
ꢀ
Total Standard Tolerance for Total Length of Cable Assembly
ꢀOrdering Information
Total Length(mm)
Standard Tolerance (mm)
U.FL - [] LP - [] - A - (L)
< <
00350 L 00200
= =
04
08
1
2
3
4
<
02000<L 00500
=
<
<
1
Series name
U.FL
05000<L 01000
=
12
<
2 Assembly type
LP: Single ended
10000<0L=1000
1.5%
2LP: Double ended
Note: Shortest length L is 35 mm.
04 : Dia.0.81mm Coaxial Cable
3 Cable type
068 : Dia.1.13mm Coaxial Cable
066 : Dia.1.32mm Coaxial Cable
062 : Dia.1 mm Coaxial Cable
088 : Dia.1.37mm Coaxial Cable
4 Total Length(mm)
Length is expressed in mm units.
Part No. of Plug Part No. of Cable Assembly
Description
U.FL-2LP-04N1-A-(L)
Dia. 0.81mm double ended coaxial cable, color: white
Dia. 0.81mm double ended coaxial cable, color: black
Dia. 0.81mm single ended coaxial cable, color: white
Dia. 0.81mm single ended coaxial cable, color: black
Dia. 1.13mm double ended coaxial cable, color: gray
Dia. 1.13mm double ended coaxial cable, color: black
Dia. 1.13mm single ended coaxial cable, color: gray
Dia. 1.13mm single ended coaxial cable, color: black
Dia. 1.32mm double ended coaxial cable, color: gray
Dia. 1.32mm double ended coaxial cable, color: black
Dia. 1.32mm single ended coaxial cable, color: gray
Dia. 1.32mm single ended coaxial cable, color: black
Dia. 0.81mm double ended coaxial cable, color: white
Dia. 0.81mm double ended coaxial cable, color: black
Dia. 0.81mm single ended coaxial cable, color: white
Dia. 0.81mm single ended coaxial cable, color: black
Dia. 1mm double ended coaxial cable, color: gray
Dia. 1mm double ended coaxial cable, color: black
Dia. 1mm single ended coaxial cable, color: gray
Dia. 1mm single ended coaxial cable, color: black
Dia. 1.37mm double ended coaxial cable, color: gray
Dia. 1.37mm double ended coaxial cable, color: black
Dia. 1.37mm single ended coaxial cable, color: gray
Dia. 1.37mm single ended coaxial cable, color: black
U.FL-2LP-04N2-A-(L)
U.FL-LP-040
U.FL-LP-04N1-A-(L)
U.FL-LP-04N2-A-(L)
U.FL-2LP-068N1-A-(L)
U.FL-2LP-068N2-A-(L)
U.FL-LP-068
U.FL-LP-068N1-A-(L)
U.FL-LP-068N2-A-(L)
U.FL-2LP-066J1-A-(L)
U.FL-2LP-066J2-A-(L)
U.FL-LP-066
U.FL-LP-066J1-A-(L)
U.FL-LP-066J2-A-(L)
U.FL-2LP(V)-04N1-A-(L)
U.FL-2LP(V)-04N2-A-(L)
U.FL-LP(V)-040
U.FL-LP(V)-04N1-A-(L)
U.FL-LP(V)-04N2-A-(L)
U.FL-2LP-062N1D-A-(L)
U.FL-2LP-062N2D-A-(L)
U.FL-LP-062
U.FL-LP-062N1D-A-(L)
U.FL-LP-062N2D-A-(L)
U.FL-2LP-088K1T-A-(L)
U.FL-2LP-088K2T-A-(L)
U.FL-LP-088
U.FL-LP-088K1T-A-(L)
U.FL-LP-088K2T-A-(L)
Please contact Hirose Sales Representative for cable length and cable end treatment.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀConversion Adapters
ꢀSMA Conversion Adapter
(Mating portion: U.FL side jack - SMA side plug)
(10.7)
8HEX
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
Part No.
CL No.
HRMP-U.FLJ
311-0300-2
ꢀSMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
14.05
6
(4.05)
5.6
1/4-36UNS-2A
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
Part No.
CL No.
HRMJ-U.FLP
311-0301-5
ꢀSMA Conversion Adapter
(Mating portion: U.FL side plug-SMA side jack)
(18.6)
(4)
6
5.5
1/4-36UNS-2A
Part No.
CL No.
Note: This connector is used by compressing the mated
portion of U.FL side onto the U.FL-R-SMT portion.
HRMJ-U.FLP-ST1
311-0385-5
ꢀReceptacle Inspection
12.9
This receptacle is used for inspecting the continuity, withstand
voltage, and other aspects of the harness product.
7HEX
(7.9)
(4.4)
5
1
M5∞0.5
Part No.
U.FL-R-1
CL No.
This receptacle is used for check the continuity, withstanding
voltage, and other performance of the cable assembly products.
331-0466-0
ꢀPlug Extraction Tool
(90)
This jig is used for extraction from a mating condition.
50
U.FL
Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.
Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.
Part No.
CL No.
U.FL-LP-N-2
331-0494-5
331-0493-2
U.FL-LP(V)-N-2
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀUsage Precautions
1. Plugs
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
2) To mate the connectors, the mating axes of both connectors must be
aligned and the connectors can be mated. The "click" will confirm fully
mated connection.Do not attempt to insert on an extreme angle.
Extraction Jig
(1) Connection/
disconnection of
connectors
U.FL Cable
Assembly
U.FL-R-SMT
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
U.FL-LP-040
2N max.
U.FL-R-SMT
(2) Permissible load on
the cable after
4N max.
connector are mated.
2N max.
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
Heating peak
240ç 3 seconds
(ç)
260
240
220
200
180
160
140
120
100
80
183ç
Preheating
(130 to 165ç)
(1) Recommended
soldering temperature
profile
40 to 50
seconds
Within 2 minutes
Time
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals.
2) The temperature profile will change depending on conditions which include such factors as the size of the board,
the solder used, and the solder thickness.
(2) Recommended
manual soldering
Manual soldering: 350˚C for 5 seconds
(3) Recommended screen
thickness
0.1 to 0.15 mm
7
相关型号:
U.FL-LP-062
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
HRS
U.FL-LP-062N1D-A-(L)
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
HRS
U.FL-LP-062N2D-A-(L)
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
HRS
U.FL-LP-066
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
HRS
U.FL-LP-066J1-A-(L)
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
HRS
U.FL-LP-066J2-A-(140)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Plug
HRS
©2020 ICPDF网 联系我们和版权申明