U.FL-LP-088N1T-A-(50) [HRS]
RF Connector, 1 Contact(s), Male, Panel Mount, Solder Lug Terminal, Plug;型号: | U.FL-LP-088N1T-A-(50) |
厂家: | HRS |
描述: | RF Connector, 1 Contact(s), Male, Panel Mount, Solder Lug Terminal, Plug |
文件: | 总7页 (文件大小:193K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
U.FL Series
Up to 6GHz Transmission Speed
Mated height comparison (with E.FL series)
E.FL-LP-040
E.FL-LP-066
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL
E.FL
ꢀSpace Factor of Mated Connector
ꢀFeatures
(
)
1. Nominal mated height of 1.9 or 2.4mm Max. 2.0 or 2.5mm
2. Small mounting area
The receptacle occupies an area of 7.7mm2.
Cable
U.FL-LP-040
Plug
3. Light weight
Dia.0.81
Receptacle: 15.7mg
4. Accepts high frequency transmission.
U.FL-R-SMT-1
Receptacle
To meet the frequency requirements of a wide variety of
miniature devices, the connectors offer high frequency
performance from DC to 6GHz, with a V.S.W.R. of 1.3 to 1.5
max.
Cable
U.FL-LP-066
Plug
5. Automatic board placement
Dia.1.32
Dia.1.13
Packaged on tape-and-reel the receptacles can be placed with
vacuum nozzles of the automatic placement equipment.
U.FL-R-SMT-1
Receptacle
6. Plugs are terminated with ultra-fine coaxial
(
)
fluorinated resin insulated cable
Cable
Standard ultra-fine coaxial cable of 0.81mm diameter (single
braid shielding) is used for the plug termination, assuring secure
and stable connections.
U.FL-LP(V)-040
Plug
Dia.0.81
7. Simple connector mating / unmating
Use of available extraction tool assures correct disconnection
of the plug and receptacle.
U.FL-R-SMT-1
Receptacle
8. Verification of the fully mated condition
Tactile click sensation confirms fully mated condition, assuring
complete electrical and mechanical connection.
Cable
U.FL-LP-062
Plug
Dia.1.00
U.FL-R-SMT-1
Receptacle
ꢀApplications
Cellular phones, PHS, mobile phones, wireless communication
devices, electronic measuring instruments, GPS, wireless LAN,
Bluetooth and any application requiring high frequency
transmission using small coaxial connectors.
Cable
U.FL-LP-088
Plug
Dia.1.37
U.FL-R-SMT-1
Receptacle
2009.2w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
ꢀProduct Specifications
Nominal characteristic impedance 50 ohms
Operating temperature range -40˚C to +90˚C Storage temperature range -30˚C to +70˚C
Ratings
Frequency range
DC to 6GHz
Operating humidity
90%RH max.
Storage humidity
90%RH max.
Item
Specification
Center : 20 m ohms max.
Conditions
1. Contact resistance
10 mA max.
100 V DC
Outer : 10 m ohms max.
500 M ohms min.
2. Insulation resistance
3. Withstanding voltage
4. V.S.W.R.*
No flashover or insulation breakdown.
200 V AC / 1 minute
Up to 3GHz
1.3 Max
Part No.
3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly
U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly
U.FL-LP-062 dia.1mm Coaxial Cable Assembly
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly
Contact resistance
1.35 Max
1.3 Max
1.4 Max
1.5 Max
1.3 Max
1.4 Max
1.3 Max
1.3 Max
1.3 Max
1.3 Max
1.3 Max
5. Durability
(mating / un-mating,
with corresponding plug)
6. Vibration
Center : 25 m ohms max.
30 cycles
Outer : 15 m ohms max.
Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration
of 59m/s2, for 5 cycles in the direction of each of the 3 axis.
Acceleration of 735 m/s2, 11ms duration, sine half-wave
waveform, 3 cycles in each of 3 axes.
No electrical discontinuity of 1µs min.
No damage, cracks or parts dislocation.
7. Shock
8. Humidity
No damage, cracks or parts dislocation.
Insulation resistance 10 M ohms min.(humidity high)
Insulation resistance 500 M ohms min.(dry)
No damage, cracks or parts dislocation.
Contact resistance: 25 m ohms max. (Center)
15 m ohms max. (Outer)
(Steady state)
96 hours at temperature of 40ç and humidity of 95%.
9. Temperature cycle
Temperature: -40˚C +5 to +35˚C +90˚C +5 to +35˚C
/
/
/
Time:
30min.
3min.
30min.
3min.
/
/
/
5 cycles
10. Salt spray
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement connection shown below.
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
ꢀMaterial / Finishes
Part
Material
Phosphor bronze
Brass
Finish
Remarks
—————
—————
—————
UL94V-0
Shell
Silver plated
Gold plated
Gold plated
Color: Black
Color: Beige
Male center contact
Female center contact
Phosphor bronze
Plug
Receptacle
PBT
LCP
Insulator
UL94V-0
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
ꢀReceptacles
Note 1: Receptacles of (01) specification are sold by the
bag with 100 pieces per bag.
Please order in pack units.
Note 2: Receptacles of (10) specification are sold by the
reel (which contains 2,500 pieces).
Please order in reel units.
Note 3: Receptacles of (40) specification are sold by the
reel (Which contains 4,000 pieces)
Note 4: This area may be covered by insulating material.
B
Recommended PCB
GND
GND
Mounting Pattern
SIG
No conductive traces in this area
Ø2
4
0.05
1.9 0.05
GND
3
2.6
0.6
GND
SIG
1 0.05
U.FL-R-SMT-1
Part No.
CL No.
Packaging
Bag packaging (100 pieces/bag)
Weight / EA
15.7/mg
RoHS
YES
U.FL-R-SMT-1(01)
U.FL-R-SMT-1(10)
U.FL-R-SMT-1(40)
331-0472-2-01
331-0472-2-10
331-0472-2-40
Reel packaging (2,500 pieces/reel)
Reel packaging (4,000 pieces/reel)
ꢀPackaging Specifications
Embossed Carrier Tape Dimensions
Reel Dimensions
1.8
14
2
0.1
4 0.1
Center contact
0.3
1.6
Unreeling direction
8
0.1
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
ꢀCable Assembly (Plug)
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL-LP-062
U.FL-LP-088
Part No.
4
3.4
5
4
4
2.5mm Max.
2.5mm Max.
2.0mm Max.
2.4mm Max.
2.4mm Max.
Mated Height
(2.4mm Nom.)
(2.4mm Nom.)
(1.9mm Nom.)
(2.3mm Nom.)
(2.3mm Nom.)
Dia. 1.13mm and
Dia. 1.32mm
Dia. 0.81mm
Coaxial cable
Dia. 0.81mm
Coaxial cable
Dia. 1mm
Dia. 1.37mm
Coaxial cable
Applicable
cable
Coaxial cable
Coaxial cable
53.7
59.1
34.8
YES
45.5
71.7
Weight (mg)
RoHS
ꢀCable Guide
Cable Specification
Jacket
Cable
Description
Type
Nominal attenuation
Inner
Conductor*
Dielectric
Outer
Conductor*
Nominal
Diameter
Dia.0.40
PFA
Diameter
Dia.0.81
PFA
Impedance
At 3GHz
At 6GHz
9.52dB/m
9.42dB/m
5.44dB/m
5.13dB/m
Dia.0.81mm
04
Coaxial Cable
7/0.05 SA
(AWG36)
7/0.08 SA
(AWG32)
7/0.08 SA
(AWG32)
7/0.071 SA
(AWG33)
7/0.102 SA
(AWG30)
Single
6.52dB/m
6.45dB/m
3.73dB/m
3.43dB/m
50 ohms
[
]
]
[
[
]
]
[
[
]
]
Shield TA SA
Dia.1.13mm
068
Coaxial Cable
Dia.0.68
FEP
Single
Dia.1.13
FEP
50 ohms
50 ohms
50 ohms
50 ohms
[
Shield TA SA
Dia.1.32mm
066
Coaxial Cable
Dia.0.66
FEP
Double
Shield TA
Tape, single
Shield TAT
Single
Dia.1.32
FEP
3.8dB/m
3.1dB/m
2.8dB/m
5.6dB/m
4.4dB/m
4.3dB/m
Dia.1mm
062
Coaxial Cable
Dia.0.62
FEP
Dia.1
FEP
Dia.1.37mm
088
Coaxial Cable
Dia.0.88
FEP
Dia.1.37
FEP
Shield TA
(data as provided by cable suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
ꢀHow to Specify Plug Cable Assembly
Single-Ended Cable Assembly
Double-Ended Cable Assembly
L
L
( )
ꢀStandard Tolerances for L
L
ꢀOrdering Information
Standard Tolerance
04mm
[]
[]
3
( )
- A - L
U.FL -
LP -
L=35 to 200mm
1
2
4
L=200 to 500mm
08mm
1 Series name
U.FL
L=500 to 1000mm
12mm
2 Assembly type
LP: Single ended
L=Longer than 1000mm
Note1: Minimum available length (L) is 35mm
1.5% of (L)
2LP: Double ended
Note2: Contact nearest HRS representative if different tolerances are
04 : Dia.0.81mm Coaxial Cable
3 Cable type
required.
068 : Dia.1.13mm Coaxial Cable
066 : Dia.1.32mm Coaxial Cable
062 : Dia.1 mm Coaxial Cable
088 : Dia.1.37mm Coaxial Cable
Note3: Contact Nearest HRS representative if one end requires
preparation.
4 Total length(mm)
Length(L)
Part No. of Plug Part No. of Cable Assembly
Description
RoHS
U.FL-2LP-04N1T-A-(L)
Dia. 0.81mm double ended coaxial cable, color: white
Dia. 0.81mm double ended coaxial cable, color: black
Dia. 0.81mm single ended coaxial cable, color: white
Dia. 0.81mm single ended coaxial cable, color: black
Dia. 1.13mm double ended coaxial cable, color: gray
Dia. 1.13mm double ended coaxial cable, color: black
Dia. 1.13mm single ended coaxial cable, color: gray
Dia. 1.13mm single ended coaxial cable, color: black
Dia. 1.32mm double ended coaxial cable, color: gray
Dia. 1.32mm double ended coaxial cable, color: black
Dia. 1.32mm single ended coaxial cable, color: gray
Dia. 1.32mm single ended coaxial cable, color: black
Dia. 0.81mm double ended coaxial cable, color: white
Dia. 0.81mm double ended coaxial cable, color: black
Dia. 0.81mm single ended coaxial cable, color: white
Dia. 0.81mm single ended coaxial cable, color: black
Dia. 1mm double ended coaxial cable, color: gray
Dia. 1mm double ended coaxial cable, color: black
Dia. 1mm single ended coaxial cable, color: gray
Dia. 1mm single ended coaxial cable, color: black
Dia. 1.37mm double ended coaxial cable, color: gray
Dia. 1.37mm double ended coaxial cable, color: black
Dia. 1.37mm single ended coaxial cable, color: gray
Dia. 1.37mm single ended coaxial cable, color: black
U.FL-2LP-04N2T-A-(L)
U.FL-LP-040
U.FL-LP-04N1T-A-(L)
U.FL-LP-04N2T-A-(L)
U.FL-2LP-068N1T-A-(L)
U.FL-2LP-068N2T-A-(L)
U.FL-LP-066
U.FL-LP-068N1T-A-(L)
U.FL-LP-068N2T-A-(L)
U.FL-2LP-066N1-A-(L)
U.FL-2LP-066N2-A-(L)
U.FL-LP-066
U.FL-LP-066N1-A-(L)
U.FL-LP-066N2-A-(L)
YES
U.FL-2LP(V)-04N1T-A-(L)
U.FL-2LP(V)-04N2T-A-(L)
U.FL-LP(V)-040
U.FL-LP(V)-04N1T-A-(L)
U.FL-LP(V)-04N2T-A-(L)
U.FL-2LP-062N1D-A-(L)
U.FL-2LP-062N2D-A-(L)
U.FL-LP-062
U.FL-LP-062N1D-A-(L)
U.FL-LP-062N2D-A-(L)
U.FL-2LP-088N1T-A-(L)
U.FL-2LP-088N2T-A-(L)
U.FL-LP-088
U.FL-LP-088N1T-A-(L)
U.FL-LP-088N2T-A-(L)
Please contact Hirose Sales Representative for cable length and cable end treatment.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
ꢀConversion Adapters
ꢀSMA Conversion Adapter
(Mating portion: U.FL side jack - SMA side plug)
(10.7)
8HEX
Part No.
CL No.
RoHS
YES
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
HRMP-U.FLJ(40)
311-0300-2-40
ꢀSMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
14.05
(4.05)
6
5.6
1/4-36UNS-2A
Part No.
CL No.
RoHS
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
HRMJ-U.FLP(40)
311-0301-5-40
YES
(18.6)
(4)
ꢀSMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
5.5
6
1/4-36UNS-2A
Part No.
CL No.
RoHS
Note: This connector is used by compressing the mated
portion of U.FL side onto the U.FL-R-SMT-1 portion.
HRMJ-U.FLP-ST1(40)
311-0385-5-40
YES
12.9
(7.9)
ꢀReceptacle to Inspection
7HEX
5
(4.4)
1
M5∞0.5
This receptacle is used for inspecting the continuity, withstand
voltage, and other aspects of the harness product.
Part No.
CL No.
RoHS
U.FL-R-1
331-0466-0
YES
ꢀPlug Extraction Tool
(90)
This jig is used for extraction from a mating condition.
50
U.FL
Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.
Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.
Part No.
CL No.
RoHS
U.FL-LP-N-2
331-0494-5
331-0493-2
YES
U.FL-LP(V)-N-2
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
ꢀUsage Precautions
1. Plugs
1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges
and pull off vertically, in the direction of the connector mating axis.
2) To mate the connectors, the mating axes of both connectors must be
aligned and the connectors can be mated. The "click" will confirm fully
mated connection.Do not attempt to insert on an extreme angle.
Extraction Jig
U.FL Cable
Assembly
(1) Mating / unmating
U.FL-R-SMT-1
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
U.FL-LP
Cable Assembly
1N max (U.FL-LP(V)-040, U.FL-LP-062)
2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
(2) Pull forces on the
cable after connectors
are mated.
U.FL-R-SMT-1
3N max (U.FL-LP(V)-040, U.FL-LP-062)
4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
1N max (U.FL-LP(V)-040, U.FL-LP-062)
2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
250 ç max. for
10 seconds
[
]
ç
q The temperature of the printed circuit board
surface temperature at the points of contact with
the terminals.
w Reflow soldering should be performed at a
printed circuit surface temperature of 250°C max.
e In individual applications the actual temperature
may vary, depending on the solder paste type,
volume / thickness and board size / thickness.
Consuly your solder paste and equipment
manufacturer for specific recommendations.
260
240
220
200
180
160
140
120
100
80
230ç
220ç
Preheat
(130 to 180ç)
(1) Recommended reflow
temperature profile
120 seconds max.
50 seconds max.
60 seconds max.
Time
(2) Recommended
manual soldering
Manual soldering: 350˚C for 5 seconds
(3) Recommended metal
mask thickness
0.1 to 0.12 mm
2 times
(4) Reflow cycles
3. Operating environment and storage conditions
The connectors are not designed to operate in the following environments:
• Exposed to a excessive amounts of fine particles and dust
• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
• Environments having large rapid variations in temperature.
(1) Operating environment
Store in the Hirose Electric packaging.
(2) Storage conditions -
Receptacle
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
7
相关型号:
©2020 ICPDF网 联系我们和版权申明