U.FL-R-SMT10 [HRS]
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height; 超小型表面贴装同轴连接器 - 薄型1.9毫米或2.4毫米插配高度
| 型号： | U.FL-R-SMT10 |
| 厂家： | 
HRS |
| 描述： | Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height |
| 文件： | 总8页 (文件大小：178K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
U.FL Series
Meets up to 6 GHz Requirement
Mated Height Comparison
(With Hirose Product)
E.FL-LP-040
E.FL-LP-066
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL Series
E.FL Series
ꢀSpace Factor of Mated Connector
ꢀFeatures
1. Low Profile: 1.9mm or 2.4mm Nom. Mated Height
Height from the circuit board is 2.0mm or 2.5mm maximum
when a plug (right angle) is mated to a receptacle, which ranks
with world’s smallest class.
U.FL-LP-040
2.Extremely Small Occupied Mounting Area
In comparison with our SMT coaxial connectors E.FL series, the
receptacle provides a reduction of approximately 18% of
occupied mounting surface, which is only 7.7mm2.
U.FL-R-SMT
U.FL-LP-066
3.Light Weight
One of the world’s lightest coaxial connectors.
Receptacle: 15.7mg
4.Applicable Up to 6 GHz Frequency
To meet the frequency requirements of a wide variety of
miniature equipment, these connectors offer high frequency
performance from DC to 6 GHz.
U.FL-R-SMT
5.Board placement with automatic equipment
Supplied on tape-and-reel packaging.
NEW
NEW
U.FL-LP(V)-040
6.Use of Ultra-fine Teflon Cable
From among the types of applicable cable, dia. 0.81mm(single
shielded) ultra-fine Teflon coaxial cable has been made a
standard specification in construction area.
U.FL-R-SMT
U.FL-LP-062
Refer to the following pages for different cable types.
7.Simple Removal of Connector
The extraction jig permits simple removal of connectors.
8.User Friendly Mating Operation
U.FL-R-SMT
U.FL-LP-088
Tactile lock feeling ensures engagement even with this small
size.
NEW
ꢀApplications
Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,
electronic measuring instruments, etc.
U.FL-R-SMT
2003.9
1
ꢀ Product Specifications
Nominal characteristic impedance
50 ohms
60 V AC (rms)
DC to 6 GHz
Operating temperature range
Operating humidity
-40˚C to +90˚C
90% max.
Voltage rating
Ratings
Frequency range
Item
Specification
Center: 20 m ohms max.
Conditions
1. Contact resistance
10 mA max.
Outside: 10 m ohms max.
500 M ohms min.
2. Insulation resistance
3. Withstanding voltage
4. V.S.W.R.*
100 V DC
No flashover or insulation breakdown.
Part No.
200 V AC / 1 minute
Up to 3GHz
1.3 Max
3 to 6GHz
U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly
1.35 Max
1.3 Max
1.4 Max
1.5 Max
1.3 Max
1.4 Max
U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly
U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly
U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly
U.FL-LP-062 dia.1mm Coaxial Cable Assembly
U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly
1.3 Max
1.3 Max
1.3 Max
1.3 Max
1.3 Max
5. Female contact holding force 0.15 N min.
Measured with a Ø 0.475 pin gauge
6. Durability
Contact resistance
(mating/un-mating,
with corresponding plug)
7. Vibration
Center: 25 m ohms max.
Outside: 15 m ohms max.
30 cycles
Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration
of 59m/s2, for 5 cycles in the direction of each of the 3 axis.
Acceleration of 735 m/s2, 11ms duration, sine half-wave
waveform, 2 cycles in each of 3 axes.
No electrical discontinuity of 1µs min.
No damage, cracks or parts dislocation.
8. Shock
9. Humidity
No damage, cracks or parts dislocation.
(Steady state)
Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40ç and humidity of 95%.
Insulation resistance 500 M ohms min.(when dry)
10. Temperature cycle
No damage, cracks or parts dislocation.
Contact resistance:25 m ohms max. (Center)
15 m ohms max. (Outside)
Temperature:-40˚C +5 to +35˚C +90˚C +5 to +35˚C
/
/
/
Time:
30
5 max.
30
/
5 max.(Minutes)
/
/
5 cycles
11. Salt spray test
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
The above V.S.W.R. standard values were measured using the measurement system of the diagram below.
Note 1: Cable type connectors were measured with SMA conversion adapters
attached to both ends of the harness product of a suitable 100cm cable.
Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and
measurements were conducted with SMA conversion adapters attached.
ꢀMaterials
Part
Material
Phosphor bronze
Brass
Finish
Remarks
—————
—————
—————
UL94V-0
Shell
Silver plating
Gold plating
Gold plating
Color: Black
Color: Beige
Male center contact
Phosphor bronze
Female center contact
Plug
Receptacle
PBT
LCP
Insulator
UL94V-0
2
ꢀCable Assembly (Plug)
U.FL-LP-040
U.FL-LP-066
U.FL-LP(V)-040
U.FL-LP-062
U.FL-LP-088
Part No.
4
3.4
5
4
4
2.5mm Max.
Mated Height
2.5mm Max.
2.0mm Max.
2.4mm Max.
2.4mm Max.
(2.4mm Nom.)
(2.4mm Nom.)
(1.9mm Nom.)
(2.3mm Nom.)
(2.3mm Nom.)
Dia. 1.13mm and
Dia. 1.32mm
Dia. 0.81mm
Coaxial cable
Dia. 0.81mm
Coaxial cable
Dia. 1mm
Dia. 1.37mm
Coaxial cable
Applicable
cable
Coaxial cable
Coaxial cable
53.7
59.1
34.8
45.5
71.7
Weight (mg)
ꢀCable Guide
Cable Specification
Jacket
Cable
Dielectric
Description
Nominal attenuation
Inner
Conductor*
Outer
Conductor*
Nominal
Type
Diameter
Dia.0.40
PFA
Diameter
Dia.0.81
PFA
Impedance
At 3GHz
At 6GHz
9.42dB/m
Dia.0.81mm
Coaxial Cable
Dia.1.13mm
Coaxial Cable
Dia.1.32mm
Coaxial Cable
Dia.1mm
7/0.05 SA
(AWG36)
7/0.08 SA
(AWG32)
7/0.08 SA
(AWG32)
7/0.071 SA
(AWG33)
7/0.102 SA
(AWG30)
Single
04
50 ohms
50 ohms
50 ohms
50 ohms
50 ohms
6.45dB/m
Shield SA
Single
Dia.0.68
FEP
Dia.1.13
FEP
3.43dB/m
5.13dB/m
068
066
062
088
Shield SA[TA]
Double
[3.73dB/m]
[5.44dB/m]
Dia.0.66
FEP
Dia.1.32
FEP
3.8dB/m
3.1dB/m
2.8dB/m
5.6dB/m
4.4dB/m
4.3dB/m
Shield TA
Tape, single
Shield TAT
Single
Dia.0.62
FEP
Dia.1
Coaxial Cable
Dia.1.37mm
Coaxial Cable
FEP
Dia.0.88
FEP
Dia.1.37
FEP
Shield TA
(data as provided by material suppliers, for reference only)
* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin
ꢀHow to Specify Cable Assembled Plug
Dimension of U.FL Series assembly products should be made as indicated below.
Single-Ended Cable Assembly
Double-Ended Cable Assembly
L
L
ꢀTotal Standard Tolerance for Total Length of Cable Assembly
ꢀOrdering Information
U.FL - [] LP - [] - A - (L)
Total Length(mm)
< <
Standard Tolerance (mm)
00350 L 00200
= =
04
08
1
2
3
4
<
02000<L 00500
=
1 Series name
U.FL
<
<
05000<L 01000
=
12
2 Assembly type
LP: Single ended
<
10000<0L=1000
1.5%
2LP: Double ended
Note: Shortest length L is 35 mm.
04 : Dia.0.81mm Coaxial Cable
3 Cable type
068 : Dia.1.13mm Coaxial Cable
066 : Dia.1.32mm Coaxial Cable
062 : Dia.1 mm Coaxial Cable
088 : Dia.1.37mm Coaxial Cable
4 Total Length(mm)
Length is expressed in mm units.
Please contact Hirose Sales Representative for cable length and cable end treatment.
3
ꢀReceptacles
Cut Out Prohibition Area
4±0.05
GND
GND
1.9±0.05
SIG
GND
Ø2
GND
SIG
3
2.6
0.6
Note 1: Receptacles of (01) specification are sold by the
pack with 100 pieces per pack.
1±0.05
Please order in pack units.
Note 2: Receptacles of (10) specification are sold by the
reel (which contains 2,500 pieces).
Please order in reel units.
Recommended PCB Footprints
Note 3: Permissible value for mold resin which gets onto
the center contact.
Part No.
CL No.
Packaging
Weight (mg)
15.7/unit
U.FL-R-SMT(01)
U.FL-R-SMT(10)
331-0471-0-01
331-0471-0-10
Bag packaging (100 pieces/bag)
Reel packaging (2500 pieces/reel)
ꢀPackaging Specifications
Embossed Carrier Tape Dimensions
2±0.1 4±0.1
Center contact
0.3
1.6
Unreeling direction
8±0.1
Reel Dimensions
1.8
14
4
ꢀConversion Adapter
ꢀSMA Conversion Adapter
(Mating portion: U.FL side jack - SMA side plug)
(10.7)
8HEX
1.1
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
Part No.
CL No.
HRMP-U.FLJ
311-0300-2
ꢀSMA Conversion Adapter
(Mating portion: U.FL side plug - SMA side jack)
14.05
6
(4.05)
5.6
1/4-36UNS-2A
Note: The U.FL side mating portions has a lower lock retention
force than the regular product, therefore, cannot be used
for purposes other than performance measurements.
Part No.
CL No.
HRMJ-U.FLP
311-0301-5
ꢀSMA Conversion Adapter
(Mating portion: U.FL side plug-SMA side jack)
(18.6)
(4)
6
5.5
1/4-36UNS-2A
Part No.
CL No.
Note: This connector is used by compressing the mated
portion of U.FL side onto the U.FL-R-SMT portion.
HRMJ-U.FLP-ST1
311-0385-5
ꢀReceptacle for Check
12.9
This receptacle is used for inspecting the continuity, withstand
voltage, and other aspects of the harness product.
7HEX
(7.9)
(4.4)
5
1
M5×0.5
Part No.
U.FL-R-1
CL No.
This receptacle is used for check the continuity, withstanding
voltage, and other performance of the cable assembly products.
331-0466-0
ꢀExtraction Jig
(90)
This jig is used for extraction from a mating condition.
50
U.FL
Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.
Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.
Part No.
CL No.
U.FL-LP-N-2
331-0494-5
331-0493-2
U.FL-LP(V)-N-2
5
ꢀUsage Precautions
1. Plugs
1) To disconnect connectors, hook the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 onto the connector cover and
pull off vertically in the direction of the connector mating axis.
1) To remove the connector directly, hold the connector cover and pull off
vertically in the direction of the connector mating axis.
(Please exercise caution so as not to injure fingertips or nails.)
2) To mate the connectors, the mating axes of both connectors are aligned
and the connectors are inserted as perpendicularly as possible.
Do not attempt to insert on an extreme angle.
Extraction Jig
(1) Connection/
disconnection of
connectors
U.FL Cable
Assembly
U.FL-R-SMT
After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram
below.
U.FL-LP-040
2N max.
U.FL-R-SMT
(2) Permissible load on
the cable after
4N max.
connector mating.
2N max.
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
Heating peak
240℃ 3 seconds
(℃)
260
240
220
200
180
160
140
120
100
80
183℃
(130 to 165℃)
Preheating
(1) Recommended
temperature profile
(Reference)
40 to 50
seconds
Within 2 minutes
Time
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals (for surface mounted receptacle).
2) The temperature profile will change depending on conditions which include such factors as the size of the board,
the solder used, and the solder thickness.
(2) Recommended
manual soldering
(Reference)
Manual soldering: 350˚C for 5 seconds
(3) Recommended screen
thickness
0.1 to 0.15 mm
6
:
NOTES
7
EUROPE BRANCH:
GERMANY:
USA:
HIROSE ELECTRIC CO., LTD.
Beechavenue 46.1119PV
Schiphol-Rijk,The Netherlands
Phone : 31 20 6557460
Fax : 31 20 6557469
HIROSE ELECTRIC GmbH
Zeppelinstrasse 42 D-73760 Ostfildern Kemnat
Phone : 49 711 4560021
Fax : 49 711 4560729
HIROSE ELECTRIC U.S.A., INC.
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1 805 522 7958
Fax : 1 805 522 3217
http://www.hirose.de
http://www.hirose.com
http://hiroseeurope.com
UNITED KINGDOM:
CHINA:
KOREA:
HIROSE ELECTRIC UK LTD.
HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD.
3705,Bund Center,222 Yan An Road(E),Shanghai 20002
Phone : 86 21 6335 2538
HIROSE KOREA CO., LTD.
Crownhill Business Centre 22 Vincent Avenue
Crownhill, Milton Keynes MK8 OAB
Phone : 44 1908 305400
(#2NA311,Shihwa Industrial Complex),
1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do
Phone : 82 31 496 7000,7124
Fax : 82 31 496 7100
Fax : 86 21 6335 0767
Fax : 44 1908 305401
http://www.hirose.co.uk
http://www.hirose.co.kr
HONG KONG:
SINGAPORE:
TAIWAN:
HIROSE ELECTRIC CO., LTD.
Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha
Tsui East, Kowloon
Phone : 852 2803 5338
Fax : 852 2591 6560
HIROSE ELECTRIC CO., LTD.
10 Anson Road #34-13 International Plaza 079903
Phone : 65 6324 6113
HIROSE ELECTRIC CO., LTD.
No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei
Phone : 886 2 2557 7351,7352
Fax : 886 2 2552 9851
65 6324 6123
Fax :
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
8
相关型号：
©2020 ICPDF网 联系我们和版权申明