W-FL2 [HRS]
Ultra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height;
| 型号： | W-FL2 |
| 厂家： | 
HRS |
| 描述： | Ultra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height |
| 文件： | 总6页 (文件大小：190K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
NEW
Ultra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
W.FL2 Series
Occupied Mounting Area
2.0mm
2.0mm
W. FL2 Series
W. FL Series
ꢀFeatures
Mated height comparison (with W.FL Series)
1. Nominal mated height of 1.18 mm (Max. 1.3
mm)
2. Small board footprint
W. FL2 Series
W.FL2 Plug
(with 0.81mm dia. cable)
W. FL Series
W.FL2 Plug
(with 0.81mm dia. cable)
As with W. FL Series, the receptacles occupies an area
of 3.4 mm_ and share the same land pattern.
Note: The W. FL2 Series and the W. FL Series are not
compatible.
3. Extremely light weight
Receptacle weight of 5.0 mg and plug weight of 17.4 mg
makes the connectors one of the lowest weights on the
market
W.FL2-R-SMT-1
W.FL-R-SMT-1
4. Accepts high frequency transmission of DC
to 6 GHz
DC to 3 GHz: V.S.W.R. of 1.3 max.
3 GHz to 6 GHz: V.S.W.R. of 1.4 max.
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic placement
equipment.
W. FL2 Plug and Receptacle
6. Plugs are terminated with ultra-fine coaxial
W.FL2 Plug
3.3
(fluorinated resin insulated) cable
Cable
Standard ultra- fine coaxial cable of 0.81 mm diameter
(single braid shielding) is used for the plug termination,
assuring secure and stable connections.
7. Simple connector mating / un-mating
Use of the available mating / un-mating tools assures
correct connection / disconnection of the plug and
receptacle.
W.FL2-R-SMT-1
Receptacle
ꢀApplications
Mobile phones, wireless LAN related applications, Bluetooth
protocol devices, PDA, GPS, wireless communication
devices, electronic measuring instruments and any
application requiring high frequency transmission using
ultra-small coaxial connectors.
2008.2
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesꢀUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
ꢀSpecifications
-40°C to +90°C
(RH 90% max.)
Nominal characteristic impedance
Frequency range
50ø
Operating temperature range
Storage temperature range
Rating
-30°C to +70°C
(RH 90% max.)Note 1
DC to 6 GHz
Item
Specification
1. Contact resistance
20 mø max. (center contact), l0 mø max. (outer contact)
2. Insulation resistance 500 Mø min., 100 V DC
3. Withstanding voltage 200 V AC / 1 minute
1.3 max. (DC to 3 GHz)
4. V.S.W.R.
1.4 max. (3 GHz to 6 GHz)
* V.S.W.R. Measurement
as shown on the block diagram below.
Note: Verify connection and measurement setup.
Note1: Cable assembly measurements with SMA conversion adapters
mated with W.FL2 plug at each end of the 100cm long ultra-fine
coaxial cable.
Network Analyzer
Test Set
Note2: Receptacles mounted on a 50 ohms glass epoxy board.
Measurements were conducted with SMA conversion adapters
attached.
Test Port
D.U.T Termination
Test Post Cable
Note1. The term “storage” refers to products stored for long period of time prior to mounting and use.
ꢀMaterials
ꢀPlugs – Right Angle
Part
Shell
Material
Phosphor bronze
PBT
Finish
Silver plated
Insulator
Color: Black, UL94V-0
Gold plated
Female center contact
Phosphor bronze
ꢀReceptacle
Part
Shell
Material
Phosphor bronze
LCP
Finish
Silver plated
Insulator
Color: Black, UL94V-0
Gold plated
Male center contact
Brass
ꢀPlugs
ꢀCable
3.3
All dimensions: mm
Plugs can be ordered only as terminated cable assemblies.
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesꢀUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
ꢀHow to Specify Cable Assembly
Double-ended cable assembly
Single-ended cable assembly
L (mm)
L (mm)
Ordering Information
ꢀOrdering Information
ꢀStandard tolerances for (L)**
(L)(mm)
*L=35 to 200
Standard Tolerance (mm)
[ ]
--
--
--
--
4 mm
8 mm
W.FL2 2LP 04N
A (L)
--
L=200 to 500
1
2
3
4
5
L=500 to 1000
12 mm
L=Longer than 1000 mm /
1.5% of (L)
[ ]
--
--
W.FL2
LP
04N
A (L)
--
* Minimum available length (L) is 35mm
** Contact nearest HRS representative if different
tolerances are required.
1
2
3
4
5
*** Contact Nearest HRS representative if one end
requires preparation.
1
2
Series name
W.FL2
4
5
Cable color
1: White, 2: Black
Assembly type
LP : Single ended
2LP : Double ended
Total length (mm)
Length (L)
3
Cable type
04N: 0.81mm dia. ultra-fine coaxial cable
ꢀReceptacles
0.7
0.25
0.3
0.3
SIG
1.7
2
GND
Part Number
CL No.
Packaging
Weight/EA RoHS
W.FL2-R-SMT-1(10) 331-0315-4-10 Reel (2,000 pieces per reel)
W.FL2-R-SMT-1(40) 331-0315-4-40 Reel (5,000 pieces per reel)
5.0mg
YES
2.6
1.4
0.5
BRecommended PCB mounting pattern (Note 1)
Note 1: The land pattern is the same as that of the W. FL series connectors.
Note 2: Recommended metal mask thickness: 0.1mm to 0.12mm
ꢀPackaging Specifications
SIG
GND
No conductive traces
in this area
Reel Dimensions
14
14
W.FL2-R-SMT-1(10)：
ꢀReel material: Corrugated board
W.FL2-R-SMT-1(40)：
ꢀReel material: Plastic
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent
W.FL2 SeriesꢀUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
ꢀConversion Adapters
(
)
ꢀSMA Conversion Adapter W.FL2 side jack – SMA side plug
(10.15)
8HEX
All dimensions: mm
Note: Used for performance measurements only.
Part Number
CL No.
RoHS
YES
The W.FL mating side has lower retention force when
mated with the corresponding part.
HRMP-W.FL2J
311-0394-6
ꢀSMA Conversion Adapter (W.FL2/W.FL side plug – SMA side jack)
13.8
(4.05)
6
5.6
1/4-36UNS-2A
All dimensions: mm
Note: Used for performance measurements only.
The W.FL mating side has lower retention force when
mated with the corresponding part.
Part Number
CL No.
311-0368-6-40
RoHS
YES
HRMJ-W.FLP(40)
ꢀSMA Conversion Adapter
(18.14)
5.5
(4)
6
1/4-36UNS-2A
All dimensions: mm
Note:When mating with corresponding part (W.FL2-R-
SMT-1) must be pressed down and held to make
complete connection.
Part Number
CL No.
311-0417-0
RoHS
YES
HRMJ-W.FL2P-ST3
ꢀReceptacle Inspection Adapter (W.FL2/W.FL)
Used for inspecting the performance parameters of the cable assembly.
12.1
(7.9)
(4.4)
4.2
7HEX
1
M5∞0.5
All dimensions: mm
Part Number
W.FL-R-1
CL No.
331-0483-9
RoHS
YES
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent
W.FL2 SeriesꢀUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
ꢀTools
ꢀPlug - Mating /Unmating
Mating end
Unmating end
(60)
Part Number
CL No.
RoHS
YES
W.FL2-LP-IN.OUT
CL331-0321-7
ꢀPlug - Mating
(100)
Part Number
W.FL-LP-IN
CL No.
RoHS
YES
CL331-0323-2
Note: Can be used with W.FL or W.FL-LP(G) plugs.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL2 SeriesꢀUltra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height
ꢀPrecautions
1. Plugs
(1) Mating / unmating
qTo disconnect connectors, insert the extraction side of insertion and extraction jig W.FL2-LP-IN.OUT and perform as
described in the diagram below.
ꢀUse of the extraction tool is absolutely
mandatory. Any attempt of unmating by
pulling on the cable may result in damage
• Unmating
and affect the mechanical / electrical
performance.
Insert the extraction side of the W.FL2-
LP-IN tool under the mated plug at the
cable connection side (as shown).
Tilt the tool as shown
and lift the plug cable
assembly.
Removal
complete
q
w
• Mating
q Align the mating tool W.FL-LP-IN or the
mating end of the tool W.FL2-LP-IN.OUT over
the plug end of the cable assembly.
w Firmly place the tool over the plug until it is
secured in the tool.
e Place the plug cable assembly (held in the
tool) over the corresponding receptacle.
r Assuring that the plug and receptacle are
aligned press-down perpendicular to the
mounting surface until both connectors are
fully mated.
q
w
e
r
t
W.FL2-LP-040 (Plug)
W. FL2-R-SMT-1:
Removal of
the tool
t Remove the mating tool by carefully pulling it
up.Removal of the tool
W. FL2 Plug pickup
Insertion to a W. FL2 receptacle�
(2) Pull forces on the
cable after connectors
are mated
• Plug
W.FL2-LP-040
2 N max.
Do NOT apply any pull forces after the
bending of the cable.
W.FL2-R-SMT-1
(3) Precautions
Do not twist connectors excessively during mating / unmating.
2. Receptacles
(1) Recommended reflow
temperature profile
250 ç max. for
10 seconds
[
]
ç
q The temperature of the printed circuit board surface
temperature at the points of contact with the terminals.
w Reflow soldering should be performed at a printed
circuit surface temperature of 250°C max.
e In individual applications the actual temperature may
vary, depending on the solder paste type, volume /
thickness and board size / thickness. Consuly your
solder paste and equipment manufacturer for specific
recommendations.
260
240
220
200
180
160
140
120
100
80
230ç
Preheat
220ç
(130 to 180ç)
120 seconds max.
Time
50 seconds max.
60 seconds max.
(2) Recommended metal mask thickness 0.1 mm to 0.12 mm
(3) Reflow cycles
2 times
3. Operating environment and storage conditions
The connectors are NOT designed to operate in the following environments:
• Exposed to a excessive amounts of fine particles and dust
(1) Operating environment
• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
• Environments having large rapid variations in temperature.
(2) Storage conditions -
Receptacle
Store in the Hirose Electric packaging.
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
6
相关型号：
W-HT-1884
KK-100 Connector Kit Vertical and Right Angle Header and Receptacle, with Extraction and Universal Crimp Tool
MOLEXKITS
W-HT-1919
KK Breakaway Vertical and Right Angle Header and Receptacle with Universal Crimp Tool
MOLEXKITS
W-HT-1921
.062" Power Connector Kit Panel Mount Plug and Receptacle, with Extraction and Universal Crimp Tool, 5A 250V
MOLEXKITS
W-HT-2023
.062" Power Connector Kit Panel Mount Plug and Receptacle, with Extraction and Universal Crimp Tool, 5A 250V
MOLEXKITS
W-IRFC254
Power Field-Effect Transistor, 250V, 0.14ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
W-IRFC460
Power Field-Effect Transistor, 500V, 0.27ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
W-IRFC470
Power Field-Effect Transistor, 500V, 0.23ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
W-IXFD10N100
Power Field-Effect Transistor, 1000V, 1.2ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
W-IXFD11N80
Power Field-Effect Transistor, 800V, 0.95ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
W-IXFD12N100
Power Field-Effect Transistor, 1000V, 1.05ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
W-IXFD12N90-L
Power Field-Effect Transistor, 900V, 0.9ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
IXYS
©2020 ICPDF网 联系我们和版权申明