W.FL-R-SMT-1(40) [HRS]
RF Connector;型号: | W.FL-R-SMT-1(40) |
厂家: | HRS |
描述: | RF Connector |
文件: | 总8页 (文件大小:287K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultra Small Surface Mount Coaxial Connectors
1.4mm or 1.65mm Mated Height
W.FL Series
Occupied Mounting Area
W.FL Series
U.FL Series
Fig.1
Mated height comparison
■Features
1. Nominal mated height of 1.4 mm or 1.65mm
(Max. 1.55 or 1.85mm)(Fig.2)
L#;A"AE"%)%
L#;A"AE"%)%=;
J#;A"AEꢀKꢁ"%)%=;
2. Small board footprint
The W.FL Series is about 55% smaller than our
2
U.FL Series connector and only uses 3.4mm of
PCB space. The PCB layout for the W.FL Series is
the same as for W.FL2 and X.FL Series.
Note:This product is not compatible with W.FL2
Series and X.FL Series.(Fig.1)
L#;A"AEꢀ<ꢁ"%+'=;
J#;A"AE"%+'=;
3. Extremely light weight
Receptacle:
5.6 mg
Right-angle plug: 18.6 mg(040), 28.2mg(062)
4. Frequency range up to 6 GHz
DC to 3 GHz : V.S.W.R. of 1.3 max.
3 GHz to 6 GHz: V.S.W.R. of 1.4 max.
Fig.2
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic
W. FL Plug and Receptacle
placement equipment.
W.FL-LP-040
W.FL-LP-040HF
2.85
6. Plugs are terminated with ultra-fine
coaxial (fluorinated resin insulated)
cable
The use of ultra-fine coaxial(fluorinated resin
insulated) cables on these connectors offer the
ability to complete connections in small, confined
spaces with a smooth, easy operation.
W.FL-LP(G)-062HF
3.65
7. Simple connector mating / unmating
Use of the available mating/un-mating tools
assures correct connection/disconnection of the
plug and receptacle.
8. Halogen-free*(Receptacle, Plug(HF type))
Fig.3
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900 ppm maximum,
Cl+Br combined-1,500 ppm maximum
■Applications
Mobile phones, wireless communication devices,
electronic measuring instruments, GPS, wireless LAN,
Bluetooth and any application requiring high frequency
transmission using small coaxial connectors.
1
2014.11e
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
■Specifications
-40°C to +90°C
(90% RH max.)
-30°C to +70°C
(90% RH max.)
Nominal characteristic impedance
50 ohms
Operating temperature range
Storage temperature range
Rating
Frequency range
DC to 6 GHz
Item
1. Contact resistance
Specification
Conditions
10mA max.
Center contact: 20m ohms max.
Outer contact: 10m ohms max.
2. Insulation resistance 500M ohms min.
100V DC
3. Withstanding voltage No flashover or insulation breakdown
200V AC / 1 minute
1.3 Max.
4. V.S.W.R.*
Up to 3 GHz
3 to 6 GHz
1.4 Max.
*V.S.W.R. Measurement System
Measured as shown on the block diagram below.
Note1: Measurement way of a W.FL Cable assembly (plug)
W.FL Cable assembly (plug) is measured with SMA conversion
adapters mated with W.FL plugs at both ends of a 100cm coaxial
cable harness
Network Analyzer
Test Set
Test Port
D.U.T Termination
Note2: Measurement way of a W.FL receptacle
W.FL receptacle, which is mounted on a 50 ohms glass epoxy board,
is measured with a SMA conversion adapter.
Test Port Cable
■Materials
●Plug – right angle
Part
Shell
Material
Phosphor bronze
Phosphor bronze
Finish / Remarks
Silver plated
Female center contact
Gold plated
Color: Black, UL94V-0(040)
Color: Gray, UL94V HB(040HF, 062HF)
Insulator
PBT
●Receptacle
Part
Shell
Material
Phosphor bronze
LCP
Finish / Remarks
Silver plated
Insulator
Color: Black, UL94V-0
Gold plated
Male center contact
Brass
■Cable Assembly(Plug)
W.FL-LP-040(06), W.FL-LP-040HF(06) (Applicable cable: outer diameter 0.81)
2.85
W.FL-LP-062HF(06) (Applicable cable: outer diameter 1.0)
(#+*
[Plugs can be ordered only as terminated cable assemblies.]
2
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
BHow to Specify Cable Assembly
[Double-ended cable assembly]
[Single-ended cable assembly]
L(mm)
L(mm)
Ordering Information
Ordering Information
Standard tolerances for (L)
(L)mm
Standard tolerance(mm)
Used plug:W.FL-LP-040(06), W.FL-LP-040HF(06) (Dia. 0.81)
Double-Ended
*L=35 to 200
4
1L=200 to 500
1L=500 to 1000
L=Longer than 1000
8
12
--
--
-- --
W.FL 2LP HF6 04N TV A L
1.5ꢀ of (L)
q
w
e
r
t
y
u
Note: Minimum available length(L) is 35mm.
Single-Ended
--
--
-- --
W.FL LP HF6 04N TV A L
q
w
e
r
t
y
u
Series name
W.FL
q
w
Assembly type
LP : Single ended
2LP : Double ended
Environmental compliant HF6 : Halogen-free
e
6
: RoHS compliant
Cable type
04N : 0.81mm dia. ultra-fine coaxial cable
r
t
1
2
: White
: Black
Cable Color
Cable outer conductor
Total length(mm)
TV : Tin plated braided wire
Length(L)
y
u
Used plug:W.FL-LP(G)-062HF(06) (Dia. 1)
Double-Ended
--
--
-- --
W.FL 2LPG HF 062N D A L
q
w
e
r
t
y
u
Single-Ended
--
--
-- --
W.FL LPG HF 062N D A L
q
w
e
r
t
y
u
Series name
W.FL
q
w
Assembly type
LPG : Single ended
2LPG: Double ended
Environmental compliant HF : Halogen-free
e
r
Cable type
062N: 1.0mm dia. ultra-fine coaxial cable
1
2
3
D
: Gray
Cable Color
: Black
t
: White
Cable outer conductor
Total length(mm)
: Copper tape + Outer tin plated braided wire
y
u
Length(L)
3
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
■Receptacle
B
Recommended PCB
mounting pattern
0.85
0.3
0.25
2.6
1.4
0.5
0.3
SIG
1.7
2
GND
SIG
GND
No conductive traces in this area
Note: The land pattern is the same as that of the
X.FL, W.FL2 series connectors.
All dimensions: mm
Part No.
HRS No.
Packaging
RoHS
Yes
W.FL-R-SMT-1(60)
W.FL-R-SMT-1(80)
331-0482-6 60
331-0482-6 80
Reel (5,000 pcs/reel)
Reel (10,000 pcs/reel)
Embossed Carrier Tape Dimensions(IEC 60286-3 compliant)
Embossed Carrier Tape Dimensions
Reel Dimensions
(W.FL-R-SMT-1(60) 8mm pitch)
Unreeling direction
13.5
Material:PS(Black)
2
8
A
(W.FL-R-SMT-1(80) 4mm pitch)
2
4
Unreeling direction
A(
SCALE FREE
)
2
4
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
■Conversion Adapters
SMA Conversion Adapter (W.FL side jack – SMA side plug)
(10.3)
8HEX
W.FL
SMA
Part No.
HRS No.
311-0367-3 40
Packaging RoHS
Yes
Note:Used for performance measurements only.
The W.FL mating side has lower retention
force than the regular product when mated to
the corresponding part.
HRMP-W.FLJ(40)
1
SMA Conversion Adapter (W.FL side plug – SMA side jack)
13.8
(4.05)
6
5.6
SMA
W.FL
1/4-36UNS-2A
Note:Used for performance measurements only.
Part No.
HRS No.
311-0368-6 40
Packaging RoHS
Yes
The W.FL mating side has lower retention
HRMJ-W.FLP(40)
1
force than the regular product when mated to
the corresponding part.
SMA Conversion Adapter
(18.35)
(4)
6
5.5
1/4-36UNS-2A
Note:When mating with corresponding part (W.FL-
R-SMT-1) it must be pressed down and held
to make complete connection.
Part No.
HRS No.
Packaging RoHS
Yes
HRMJ-W.FLP-ST1(40) 311-0386-8 40
1
5
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
■Receptacle Inspection Adapter
Used for inspecting the performance parameters of the cable assembly.
12.1
(7.9)
(4.4)
4.2
1
7HEX
M5∞0.5
Part No.
HRS No.
Packaging RoHS
W.FL-R-1
331-0483-9
1
Yes
Plug-Mating Tool
This tool is used for mating a plug.
(100)
Part No.
HRS No.
Packaging RoHS
Yes
W.FL-LP-IN
331-0323-2
1
Plug-Extraction Tool
(100)
40
Part No.
HRS No.
Packaging RoHS
Yes
W.FL-LP-N
331-0492-0
1
6
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
BPrecautions
1. Plug
(1) Mating / unmating
• Unmating Insert both ends of the extraction tool under the plug (from the direction opposite to the
Cable termination), as shown and pull-up in the direction perpendicular to the mounting
surface of the receptacle.
W.FL-LP-N plug extraction tool
●Recomended the use of the extraction tool for unmating.
Any attempt of unmating by pulling on the cable may result in
W.FL Cable
Assembly
damage and affect the mechanical / electrical performance.
W.FL-R-SMT-1
• Mating
qAlign the mating tool W.FL-LP-IN or the mating end
of the tool over the plug end of the cable assembly.
wFirmly place the tool over the plug until it is secured
in the tool.
ePlace the plug cable assembly (held in the tool)over
the corresponding receptacle.
rAssuring that the plug and receptacle are aligned
press-down perpendicular to the mounting surface
until both connectors are fully mated.
tRemove the mating tool by carefully pulling it
up.Removal of the tool.
q
w
e
r
t
Plug pickup
Insertion to a receptacle Removal of the tool
(2) Pull forces on the
cable after connectors
are mated
W.FL
Cable Assembly
∞
W.FL-R-SMT-1
Receptacle
After the connectors are mating, do not apply a load to
the cable in excess of the values indicated in the
diagram.
2N max
∞
(3) Precautions
Do not twist connectors excessively during mating / unmating.
2. Receptacle
(1) Recommended reflow
temperature profile
250 ç max. for
10 seconds
[
]
ç
260
240
220
200
180
160
140
120
100
80
230ç
220ç
Preheat
(130 to 180ç)
120 seconds max.
50 seconds max.
60 seconds max.
Time
qThe temperature of the printed circuit board surface temperature at the points of contact with the terminals.
wReflow soldering should be performed at a printed circuit surface temperature of 250°C max.
eIn individual applications the actual temperature may vary, depending on the solder paste type, volume /
thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific
recommendations.
(2) Recommended metal
mask thickness
0.1 mm to 0.12 mm
2 times
(3) Reflow cycles
3. Operating environment and storage conditions
The connectors are not designed to operate in the following environments:
• Exposed to a excessive amounts of fine particles and dust
(1) Operating
environment
•
Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
• Environments having large rapid variations in temperature.
Store in the Hirose Electric packaging.
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board
mounting surface.
(2) Storage conditions -
Receptacle
7
W.FL Series●Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE
2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 580 Waters Edge Lane, Suite 205 Lombard IL
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hirose.com/us/
Santa Clara, CA 95054
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
60148
Phone : +1-630-282-6706
Mail : inquiries@hirose.com
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V.
37677 Professional Center Drive, Suite #100C Hogehillweg #8 1101 CC Amsterdam Z-O
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
Livonia, MI 48154
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
GERMANY:
UNITED KINGDOM:
CHINA:
HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE BV (UK BRANCH)
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
Fax : +86-21-6391-3335
http://www.hirose.com/eu/
http://www.hirose.com/cn/
CHINA:
CHINA:
HONG KONG:
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/cn/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
TAIWAN:
KOREA:
SINGAPORE:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose.com/cn/
HIROSE KOREA CO., LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD.
1261-10, Jeoungwhang-Dong, Shihung-City, 10 Anson Road #26-1, International Plaza
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr/
079903, Singapore
Phone : +65-6324-6113
65-6324-6123
Fax : +
http://www.hirose.com/sg/
INDIA:
INDIA:
MALAYSIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. (REPRESENTATIVE OFFICE)
Office NO.519, Regus-Green Boulevard, Level5, Tower C, Unit No.03, Ground Floor, Explorer Building International Tech 1-10-07, Suntech @ Penang Cybercity (1164),Lintang
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Park Whitefield Road, Bangalore 560066 Karnataka, India
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.
Phone : +604-619-2564
Fax : +604-619-2574
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2014. Contents are subject to change without notice for the purpose of improvements.
8
相关型号:
W.FL-R-SMT-1(60)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle
HRS
W.FL2-R-SMT-1(10)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
HRS
W.FL2-R-SMT-1(60)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle
HRS
W.FL2-R-SMT-1(80)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明