ZX62-B-5P
更新时间:2024-09-18 13:12:11
品牌:HRS
描述:USB Connector, 5 Contact(s), Male, Right Angle, Surface Mount Terminal, Locking, Receptacle
ZX62-B-5P 概述
USB Connector, 5 Contact(s), Male, Right Angle, Surface Mount Terminal, Locking, Receptacle 电信连接器和数据通信连接器
ZX62-B-5P 规格参数
生命周期: | Obsolete | Reach Compliance Code: | unknown |
风险等级: | 5.67 | 主体宽度: | 0.11 inch |
主体深度: | 0.197 inch | 主体长度: | 0.295 inch |
主体/外壳类型: | RECEPTACLE | 连接器类型: | USB CONNECTOR |
联系完成配合: | AU | 触点性别: | MALE |
触点材料: | COPPER ALLOY | 触点电阻: | 30 mΩ |
触点样式: | USB, SER B SQ | 介电耐压: | 100VAC V |
耐用性: | 10000 Cycles | 最大插入力: | 2.1962 N |
绝缘体材料: | LIQUID CRYSTAL POLYMER (LCP) | 安装选项1: | LOCKING |
安装方式: | RIGHT ANGLE | 安装类型: | BOARD |
连接器数: | ONE | PCB行数: | 1 |
最高工作温度: | 85 °C | 最低工作温度: | -30 °C |
PCB接触模式: | RECTANGULAR | 极化密钥: | POLARIZED HOUSING |
额定电流(信号): | 1.8 A | 参考标准: | UL |
可靠性: | COMMERCIAL | 外壳面层: | TIN |
外壳材料: | STAINLESS STEEL | 子类别: | Telecom and Datacom Connectors |
端子节距: | 0.6604 mm | 端接类型: | SURFACE MOUNT |
触点总数: | 5 | 撤离力-最小值: | 8.0064 N |
Base Number Matches: | 1 |
ZX62-B-5P 数据手册
通过下载ZX62-B-5P数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW
Micro-USB connectors meeting requirements of USB 2.0 Standard
ZX Series
Note: Contact us to ascertain whether a TID number has
been acquired for an individual product.
ꢀOverview
Reverse
Top mount
Drop-in
Mid-mount
Extremely small high reliability connectors complying with physical,
electrical and environmental requirements of Micro-USB standard
(USB 2.0).
(
)
(
)
Receptacles and plugs are available in a wide variety of mounting
and termination configurations, permitting their use in various
applications.
Standard
Bottom mount
(
)
ꢀFeatures
1. Size reduction
Compared with the standard Mini-B connectors, the size of ZX
connectors is reduced by approximately 60% while still allowing a
high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in standard,
mid-mount and reverse mounting styles.
SMT and through-hole (shell) PC board terminations
3. Plug styles
Corresponding to the receptacle styles, two interface configurations:
Micro-B and Micro-A, with direct wire or PCB wire soldering.
Several plug styles can be used for data transmission, earphone or
charging applications.
USB 2.0 Hi-Speed (480 Mbps)
Eye pattern measurement results:
Measured with USB 2.0 cable 2.4 m long
4. High durability
Unique contact and lock configuration assures high durability while
maintaining easy insertion / disconnection. Fully mated condition
(when mated with corresponding HRS connector) is confirmed by a
definite tactile sensation
TP2
500ps/div
2010.8
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀSpecifications
Voltage rating
30 V AC
1 A (per contact) or
Ratings
Current rating
1.8 A (contacts No. 1 and 5) and
0.5 A (contacts No. 2, 3, and 4)
Operating temperature range
Storage temperature range
-30°C to +85 °C (Note1)
-30 °C to +85°C
Item
Specification
Conditions
1. Contact resistance
2. Withstanding voltage
3. Capacitance
30 mø max.
100 mA
No flashover or insulation breakdown
2 pF max.
100 V AC / 1 minute
Between adjacent contacts at 1,000 Hz (AC voltage)
4. Durability
Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles
Insertion force: 35 N max., Removal force: 8 N min. Mated with corresponding connector
5. Total insertion/removal force
Note1: Includes temperature rise caused by current flow.
Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
ꢀMaterials
ꢀReceptacles
Part
Material
LCP
Finish
Remarks
Insulator
Contacts
Shell
Micro-B: Black, Micro-AB: Gray
Selective gold plated
Tin alloy plating
UL94V-0
---------------
---------------
Copper alloy
Stainless steel
ꢀPlugs
Part
Insulator
Contacts
Lock spring
Shell
Material
Finish
Remarks
Synthetic resin
Copper alloy
Stainless steel
Stainless steel
Micro-A: White, Micro-B: Black
Selective gold plated
---------------
UL94V-0
---------------
---------------
---------------
Nickel plated or unfinished
1
2
Series name
Termination style
ZX
ꢀOrdering information
ꢀReceptacles
10's: Right-angle PCB wire, SMT
20's: Straight, PCB wire
40's: Direct wire
60's: Right-angle, PCB wire
80's: Cradle SMT
Blank Standard (Bottom mount)
Standard (Bottom mount) through hole
Reverse (Top mount)
RD Reverse (Top mount) through hole
*
ZX 62 RD - B - 5 P
8
1
2
3
4
5
6
7
8
3
4
Board mounting style
(Receptacles)
D
R
ꢀPlugs
*
7
ZX 40 - B - 5 S
- UNIT
M
A
B
Drop-in (Mid-mount)
Micro-A
Micro-B
Mating side configuration
1
2
4
5
6
9
AB Micro-AB
5
6
Number of contacts
Contact type
5
ZX 40 - B - SLDA
P
S
Receptacle- Male
Plug – Female
1
2
4
9
7
8
Serial No.
Shell termination style –
Receptacles
Blank SMT
8
Through hole (solder tab length: 0.8mm)
ꢀProduct Styles Table
9
Components-plugs
UNIT Assembly (Insulator/contact/lock)
SLD* Cover (Note 1)
Interface
Receptacle
Plug
Note 1: Classifiers such as A, B, and C are entered for *.
Micro-A
Micro-B
Micro-AB
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀConfigurations
Mating side
configuration
Mounting, termination
styles/wire attachment
Application
Part Number
3D Image
Page
4
SMT
ZX62-B-5PA(11)
Standard
SMT
+
ZX62D-B-5PA8
ZX62R-B-5P
4
5
5
6
6
7
7
DIP
Micro-B
SMT
SMT
SMT
Reverse
Drop-in
ZX62M-B-5P(02)
ZX62-AB-5PA(11)
ZX62D-AB-5P8
ZX62R-AB-5P
Standard
SMT
+
DIP
Micro-AB
SMT
Reverse
SMT
+
ZX62RD-AB-5P8
DIP
Assembly
(insulator/contacts/lock)
:ZX40-B-5S-UNIT(12)
9 and 10
11 and 12
13
Direct wire soldering
Cover-top
Cover-bottom
:ZX40-B-SLDA
:ZX40-SLDB
Data
Assembly
:ZX10-B-5S-UNIT(12)
PCB wire soldering (insulator/contacts/lock)
Cover-top
Cover-bottom
:ZX10-B-SLDA
:ZX10-SLDB(3.3)
(right angle, through hole)
Assembly
(insulator/contacts/lock)
Cover
PCB wire soldering
(straight, through hole)
:ZX20-B-5S-UNIT(12)
:ZX20-B-SLDC
Micro-B
Earphone
Charging
Assembly
(insulator/contacts/lock)
Cover-top
Cover- bottom
:ZX64-B-5S-UNIT(14)
PCB wire soldering
(SMT)
14 and 15
14 and 16
17 and 18
:ZX64-B-SLDA
:ZX64-SLDB
Assembly
(insulator/contacts/lock)
Cover
PCB wire soldering
(SMT)
Charging
Earphone
:ZX64-B-5S-UNIT(14)
:ZX64-B-SLDC
Assembly
(insulator/contacts/lock)
Cover-top
Cover- bottom
:ZX40-A-5S-UNIT
Micro-A
Micro-B
Data
Direct wire soldering
:ZX40-A-SLDA
:ZX40-SLDB
ZX80-B-5S
19
19
With lock
SMT
+
Cradle
DIP
ZX80-B-5SA
Without lock
Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers.
Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors.
Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the
Materials (Page 2) for correct colors.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀReceptacles
ꢀMicro B - Standard (Bottom mount), Shell SMT
Part Number
CL No.
Packaging
ZX62-B-5PA(11)
242-0033-8-11
3,500 pieces per reel
ꢀRecommended PCB mounting pattern
8.3
4.1
No.5
2.6
1.3
0.4
No.1
NO CONDUCTIVE
TRACES
0.6
5
7.5
0.5
4.3
6.2
9.8
PCB EDGE
No.1
7.9
No.5
2.15
All dimensions: mm
ꢀMicro B - Standard (Bottom mount), Shell through hole
Part Number
CL No.
Packaging
ZX62D-B-5PA8
242-0056-3
2,000 pieces per reel
ꢀRecommended PCB mounting pattern
4.85
2.6
1.05(LAND)
0.65(TH)
No.5
0.65
0.4
No.1
R0.5(LAND)
R0.325(TH)
NO CONDUCTIVE TRACES
7.5
0.6
5
0.5
R0.325(TH)
0.5(TH)
4.1
5.2
7.2
9.4
2.15
2.9
4.85
PCB EDGE
7.2
No.1
No.5
All dimensions: mm
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀReceptacles
ꢀMicro B - Reverse (Top mount) Shell SMT
Part Number
ZX62R-B-5P
CL No.
Packaging
242-0028-8
2,000 pieces per reel
ꢀRecommended PCB mounting pattern
8.3
4.1
2.6
No.5
No.1
1.3
0.4
0.6
5
No.5
No.1
0.5
2.9
3.9
5.6
6.6
9.8
NO CONDUCTIVE TRACES
7.5
2.15
8.8
All dimensions: mm
ꢀMicro B - Drop-in (Mid-mount), Shell SMT
Part Number
CL No.
242-0024-7-02
Packaging
ZX62M-B-5P(02)
2,000 pieces per reel
11.5
7.5
ꢀRecommended PCB mounting pattern
1.9 4.3
7.5
4.7
No.1
2
No.5
0.6
5
5.3
0.4
1.3
PCB EDGE
No.5
2.6
6.9
7.8
8.8
12
No.1
0.25
1.3
2.6
4.7
All dimensions: mm
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀReceptacles
ꢀMicro AB - Standard (Bottom mount), Shell SMT
Part Number
CL No.
Packaging
ZX62-AB-5PA(11)
242-0045-7-11
3,500 pieces per reel
ꢀRecommended PCB mounting pattern
8.3
4.1
2.6
1.3
No.1
No.5
0.4
0.6
5
7.5
0.5
4.3
PCB EDGE
NO CONDUCTIVE TRACES
6.2
9.8
No.1
No.5
8.8
2.15
All dimensions: mm
ꢀMicro AB - Standard (Bottom mount), Shell through hole
Part Number
CL No.
242-0027-5
Packaging
ZX62D-AB-5P8
2,000 pieces per reel
ꢀRecommended PCB mounting pattern
4.45
2.6
1.3
1.05(LAND)
R0.45(LAND)
0.4
No.1
0.65(TH)
No.5
NO CONDUCTIVE TRACES
R0.3(TH)
7.5
0.6
5
R0.25(TH)
R0.5(LAND)
PCB EDGE
0.5
4.1
5.2
2.025
3.125
4.45
8.35
(0.325)
(0.5)
7.35(TH)
9(TH)
9.4
No.1
No.5
All dimensions: mm
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀReceptacles
ꢀMicro AB - Reverse (Top mount), Shell SMT
Part Number
CL No.
Packaging
ZX62R-AB-5P
242-0035-3
2,000 pieces per reel
ꢀRecommended PCB mounting pattern
8.3
4.1
2.6
1.3
No.5
No.1
0.4
NO CONDUCTIVE TRACES
0.5
7.5
0.5985
5
2.9
0.85
4.75
6.6
PCB EDGE
2.15
No.5
No.1
9.8
All dimensions: mm
ꢀMicro AB - Reverse (Top mount), Shell through hole
Part Number
CL No.
242-0025-0
Packaging
ZX62RD-AB-5P8
2,000 pieces per reel
ꢀRecommended PCB mounting pattern
9.4
9(TH)
7.35(TH)
6.6
R0.45(LAND)
R0.2MAX
R0.25(TH)
No.5
No.1
4.45
2.6
1.05(LAND)
0.65(TH)
1.3
0.4
7.5
No.5
No.1
0.6
5
(0.325)
(0.5)
0.85
2.9
2.025
3.125
4.45
8.35
4.75
NO CONDUCTIVE TRACES
All dimensions: mm
PCB EDGE
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
Plugs – assembled (not-terminated, without overmold)
ZX40 - Direct wire soldering
Components
ZX40-*-SLDA
Cover-top
ZX40-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*No PCB required
ZX40-SLDB
Cover-bottom
ZX10 - PCB wire soldering
ZX10-B-SLDA
Cover-top
ZX10-B-5S-UNIT
Assembly
(insulator/contacts/lock)
*SMT PCB termination
ZX10-SLDB
Cover-bottom
ZX20 - PCB wire soldering
ZX20-*-SLDC
Cover
ZX20-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*Straight through hole PCB
termination
ZX64 - PCB wire soldering
ZX64-*-SLDA
Cover-top
ZX64-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*Right angle through hole
PCB termination
ZX64-SLDB
Cover-bottom
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Assembly (insulator/contacts/lock) – Direct wire soldering
Part Number
CL No.
242-0002-4-12
ZX40-B-5S-UNIT(12)
Contact HRS for Cable Termination Procedure Manual.
7.9
No.5
No.1
All dimensions: mm
ꢀMicro B - Component, Cover-top - Direct wire soldering
Packaging
4,000 pieces per reel
Part Number
CL No.
242-0003-7
ZX40-B-SLDA
6.85
8
All dimensions: mm
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro A, Micro B - Component, Cover-bottom - Direct wire soldering
8
8
All dimensions: mm
( )
ZX40-SLDB 3.3
ZX40-SLDB
Part Number
CL No.
Packaging
Cable dia.
Ø3.8
ZX40-SLDB
242-0004-0
242-0023-4
4,000 pieces per reel
ZX40-SLDB(3.3)
Ø3.3
ꢀAssembled
6.85
8.6
All dimensions: mm
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Assembly (insulator/contacts/lock) - Right angle through hole PCB wire soldering (non-direct)
Part Number
CL No.
Packaging
ZX10-B-5S-UNIT(12)
242-0030-0-12
1,500 pieces per reel
Contact HRS for Cable Termination Procedure Manual.
2.6
A-A
1.3
0.15
0.79
A
X
A
PCB mounting pattern
*PCB required (not supplied)
Max. thickness: 0.6mm
7.3
3.05
2.6
No.1
X
No.5
1.3
7.6
No.5
No.1
5
All dimensions: mm
ꢀMicro B - Component, Cover-top - Right angle through hole
Part Number
CL No.
Packaging
4,500 pieces per reel
ZX10-B-SLDA
242-0031-2
6.85
7.7
All dimensions: mm
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Component, Cover-bottom – Right angle through hole
Part Number
CL No.
Packaging
ZX10-SLDB(3.3)
242-0032-5
4,500 pieces per reel
7.7
All dimensions: mm
ꢀAssembled
6.85
8.1
All dimensions: mm
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Assembly (insulator/contacts/lock) - Straight through hole PCB wire soldering (non-direct)
Part Number
CL No.
ZX20-B-5S-UNIT(12)
242-0012-8-12
Contact HRS for Cable Termination Procedure Manual.
2.6
1.3
5-0.15
PCB mounting pattern
*PCB required (not supplied)
Max. thickness: 0.6mm
No.1
No.5
1(Land)
0.6(Through hole)
7.9
No.5
No.1
1.3
2.6
8.2
10.25
All dimensions: mm
ꢀMicro B - Component, Cover - Straight, through hole
Part Number
CL No.
242-0022-1
Packaging
4,000 pieces per reel
ZX20-B-SLDC
8.2
2-0.2
ꢀAssembled
8.2
2.6
2-0.2
1.3
5-0.15
6.85
8
6.85
Assembly
(insulator/contacts/lock)
Cover
8.4
All dimensions: mm
13
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Assembly (insulator/contacts/lock) - Right angle SMT
Part Number
CL No.
ZX64-B-5S-UNIT(14)
242-0009-0-14
Contact HRS for Cable Termination Procedure Manual.
2.6
1.3
5-0.15
PCB mounting pattern
*PCB required (not supplied)
Max. thickness: 1.0mm
7.9
No.5
No.1
0.35
No.5
1.3
2.6
No.1
6.8
All dimensions: mm
ꢀMicro B - Component, Cover-top – Right angle SMT
Part Number
CL No.
242-0013-0
Packaging
4,000 pieces per reel
ZX64-B-SLDA
6.85
8
All dimensions: mm
14
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Component, Cover-bottom - Right angle SMT
Part Number
ZX64-SLDB
CL No.
Packaging
242-0049-8
4,000 pieces per reel
8
All dimensions: mm
ꢀAssembled
6.85
8.4
Assembly
(insulator/contacts/lock)
Cover-top
Cover-bottom
All dimensions: mm
15
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro B - Component, Shell/cover – Right angle SMT
Part Number
CL No.
Packaging
ZX64-B-SLDC
242-0018-4
4,000 pieces per reel
Shell/cover, without cable clamp
This shell/cover does not require ZX64-SLDB.
6.85
8
16.1
ꢀAssembled
6.85
8.4
Assembly
(insulator/contacts/lock)
Cover-top
Cover-bottom
All dimensions: mm
16
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro A - Assembly (insulator/contacts/lock) - Direct wire soldering
Part Number
CL No.
ZX40-A-5S-UNIT
242-0010-2
Contact HRS for Cable Termination Procedure Manual.
Contacts
7.9
No.5
No.1
Insulator body (color grey)
All dimensions: mm
ꢀMicro A - Component, Cover-top - Direct wire soldering
Part Number
CL No.
242-0011-5
Packaging
ZX40-A-SLDA
4,000 pieces per reel
6.85
8
All dimensions: mm
17
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlugs
ꢀMicro A, Micro B - Component, Cover-bottom - Direct wire soldering
8
8
All dimensions: mm
ZX40-SLDB
ZX40-SLDB(3.3)
CL No.
Cable dia.
Ø3.8
Part Number
ZX40-SLDB
Packaging
242-0004-0
242-0023-4
4,000 pieces per reel
ZX40-SLDB(3.3)
Ø3.3
ꢀAssembled
6.85
Assembly
(insulator/contacts/lock)
Cover-top
8.6
Cover-bottom
All dimensions: mm
18
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPlug-Vertical, cradle mount, Shell through hole
ꢀMicro B, with lock
6.65
2-0.2
6.85
8.55
2.6
1.3
5-0.15
No.5
No.1
2.5
7.1
16.55
20.55
13
1.15
All dimensions: mm
Part Number
ZX80-B-5S
CL No.
Packaging
100 pieces
242-0017-1
ꢀMicro B, without lock
6.65
2-0.2
6.85
8.55
2.6
1.3
5-0.15
No.1
No.5
2.5
7.1
16.55
20.55
13
1.15
Part Number
CL No.
242-0019-7
Packaging
100 pieces
ZX80-B-5SA
ꢀPCB mounting pattern
1.1(Land)
0.5(Through hole)
0.5(Through hole)
1.1(Land)
0.4
1.3
2.6
6.65
16.55
Contact No.1
Contact No.5
All dimensions: mm
19
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesꢀMicro-USB connectors meeting requirements of USB 2.0 Standard
ꢀPackaging Specifications
ꢀEmbossed carrier tape dimensions
ꢀReel Dimensions
Unreeling direction
12
0.5
C
D
4
2
Unreeling direction
1.8
Part Number
ZX62-B-5PA
ZX62-AB-5PA
ZX62M-B-5P
Other
C dimension
30.4
D dimension
24.4
24.4
24.4
16.4
Part Number
ZX62-B-5PA
ZX62-AB-5PA
ZX62M-B-5P
Other
A dimension
B dimension
11.5
30.4
24
24
24
16
30.4
11.5
22.4
11.5
Note : Tape and reel packaging (2,000 pieces/reel).
Order by number of reels.
7.5
ꢀRecommended Temperature Profile - Receptacles
ꢀUsing lead-free solder paste
HRS test condition
Solder composition :Paste,96.5%Sn/3.0%Ag/0.5%Cu
(ç)
250
200
150
100
50
Test board :Glass epoxy 35mm∞35mm∞0.8mm thick
250ç
The temperature profile is based on the left conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Contact your solder paste and
equipment manufacturer for specific recommendations.
220çmin.
180ç
150ç
70 S
Note 1: Up to 2 cycles of Reflow soldering are possible
under the same conditions, provided that there is a
return to normal temperature between the first and
second cycle.
120 S
Note 2: The temperature profile indicates the board surface
temperature at the point of contacts with the
connector terminals.
(S)
ꢀPrecautions
1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating.
2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable.
3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected.
4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 08/2010. Contents are subject to change without notice for the purpose of improvements.
20
ZX62-B-5P 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
ZX62-B-5PA | TI | Stellaris® LM4F120 LaunchPad Evaluation Board | 获取价格 | |
ZX62-B-5PA | HRS | Micro-USB connectors meeting requirements of USB 2.0 Standard | 获取价格 | |
ZX62-B-5PA(11) | HRS | Telecom and Datacom Connector, 5 Contact(s), Male, Right Angle, Surface Mount Terminal, Locking, Receptacle, | 获取价格 | |
ZX62-B-5PA(33) | HRS | Telecom and Datacom Connector, 5 Contact(s), Male, Surface Mount Terminal, ROHS COMPLIANT | 获取价格 | |
ZX62D-AB-5P8 | HRS | Micro-USB connectors meeting requirements of USB 2.0 Standard | 获取价格 | |
ZX62D-AB-5P8(30) | HRS | Telecom and Datacom Connector, 5 Contact(s), Male, Surface Mount Terminal, ROHS COMPLIANT | 获取价格 | |
ZX62D-B-5P8 | HRS | Micro-USB connectors meeting requirements of USB 2.0 Standard | 获取价格 | |
ZX62D-B-5P8(30) | HRS | Telecom and Datacom Connector, 5 Contact(s), Male, Surface Mount Terminal, ROHS COMPLIANT | 获取价格 | |
ZX62D-B-5PA8 | HRS | Telecom and Datacom Connector, 5 Contact(s), Male, Right Angle, Surface Mount Terminal, Locking, Receptacle | 获取价格 | |
ZX62D-B-5PA8(30) | HRS | Telecom and Datacom Connector, 5 Contact(s), Male, Surface Mount Terminal, ROHS COMPLIANT | 获取价格 |
ZX62-B-5P 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6