HAE-251M [HUAXINAN]

Surge Absorber;
HAE-251M
型号: HAE-251M
厂家: HuaXinAn Electronics CO.,LTD    HuaXinAn Electronics CO.,LTD
描述:

Surge Absorber

文件: 总8页 (文件大小:350K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SPECIFICATTON FOR APPROVAL  
CUSTOMER NAME:  
PRODUCT NAME:  
Surge Absorber  
HUAXINAN P/N :  
CUSTOMER P/N :  
Customer  
Supplier  
Manufacturing Department:  
Manufacturing Department:  
Lui Wei  
Wei Yu  
Quality Assurance Department:  
Engineering Department:  
Quality Assurance Department:  
Engineering Department:  
wang qing  
company seal:  
company seal:  
TEL : +86 - 755- 27465585  
Email: sales@huaandz.com  
Fax : +86 - 755- 27270662  
abc0734@126.com  
Address:4th Floor,Building 5,Alley2,ZhongWu New District,XiXiang Town,BaoAn District,  
ShenZhen ,China  
Web: www.huaandz.com  
Surge Absorbers  
HAE Series(HAE 系列)  
1000A  
1 Application(应用):  
Fast Delivery Time  
·For instantaneous over-voltage protection to ADSL,ISDN,MODEM,FAX,TEL,Power Supplies,Alarm systems.  
·For instantaneous over-voltage protection to RS485,RS232 port, CATV,video transceiver.  
·For instantaneous over-voltage protection to ammeter,water meter auto admin system, etc  
2 Features(特点)  
·Small capacitance and excellent insulation resistance(100MΩ min).  
·Small size,No polarity.No dark effect.  
·Low electrode capacitance(1pF max).  
·Quick response for electrostatic,surge voltage and low limiting voltage.  
·Stable for repeated discharge test conditions.  
·Working temperature: -25~ +65. Storage temperature: -25~ +85.  
3 Electrical Characteristics (电气参数)  
DC Spark-Over Voltage  
Vs(V)  
Surge current  
capacity 8/20us  
Insulation Resistance  
Test voltage IR (MΩ)  
DC 50V  
Capacitance  
of electrostatic  
1KHz-6V  
Surge Life  
Test  
Part Number  
Nominal valueMin-Max)  
HAE-141N  
HAE-181N  
HAE-201M  
HAE-251M  
HAE-301M  
HAE-401M  
HAE-501M  
140V  
180V  
200V  
250V  
300V  
400V  
500V  
(98V-182V)  
(126V-234V)  
(160V-240V)  
(200V-300V)  
(240V-360V)  
(320V-480V)  
(400V-600V)  
DC100V  
>100MΩ  
1500pF-0Ω  
-10KV-200  
times  
1pF  
1000A  
DC250V  
DC500V  
HAE-601M  
HAE-102M  
HAE-122M  
HAE-152M  
600V  
(480V-720V)  
(800V-1200V)  
(960V-1440V)  
1000V  
1200V  
1500V (1200V-1800V)  
4 Dimension(Diameter 2.6mm , Length 6.7mm) 产品尺寸  
1
HUAAN LIMITED  
www.huaandz.com  
Surge Absorbers  
5 Marking of colour code(色环标示):  
Fast Delivery Time  
HAE-501M Photo  
Part Number Colour Code 1 Colour Code 2 Colour Code 3  
HAE-301M  
HAE-501M  
Orange  
Green  
Red  
----  
Red  
---  
6 Part Number System(型号构成):  
Example  
HAE  
301  
M
No  
Symbols Explain  
HAE series(Glass Tube Dimension :Diameter: φ2.6mm , Length: 6.7mm)  
Series Name  
The symbol denoting nominal DC spark over voltage shall be expressed by three  
numerals.The first and second numerals shall represent the significant figures of  
nominal DC spark over voltage in volts(V),and the third numerals shall represent the  
number of zeros ,following the significant figures. Example) 301——30×10¹=300  
Nominal DC spark over voltage  
Tolerances of DC Spark over  
Tolerances: L — ±15% M — ±20% N — ±30% ;  
Voltage  
2
HUAAN LIMITED  
www.huaandz.com  
Surge Absorbers  
7 Initial Characteristices 基本特性 :  
项目  
测试条件  
规格值 Specification  
Test Item  
Test Method  
直流放电电压  
DC Spark-Over  
VoltageVs(V)  
逐渐地增加测量使用直流电压,即可知其开始电压,测  
定电流为一毫安与测定时间最大为一秒 (1sec).(1mA)  
(Add and measure the DC Voltage gradually Maxto get  
the discharge threshold voltage. The measuring current  
is 1mA/1 second max.)  
依型号而定  
(It depands on each part number.)  
内绝缘电阻  
在规定的设定直流电压下,跨在两端引线,即测量其内  
100MΩ或大于 100MΩ  
Insulation Resistance 绝缘电阻值.(Measure the insulation resistance of two  
(100MΩ min.)  
end of leadwire under the specified DC voltage.)  
静电电容  
使用频率 1KHZ 与小于或等于 6V 直流电压之电源,即  
测量其静电电容量 Measure the Electrostatic  
1PF 或小于 1PF  
Capacitance C(pF)  
(1pF max.)  
Capacitance under the test condition of 1KHz,DC  
6V(max).  
8 Enviromental Characteristics(环境试验) :  
试验项目  
试验方法  
性能 Characteristics  
Test Item  
Test Method  
耐寒性(依据 JIS C0020)  
放置于-40±3℃之环境中 1000 小時后,取出置于常温常湿中 4  
满足各个特性之规格值  
Within standard  
Cold Resistance JIS C0020 小時后,检测直流开始放电电压缘阻抗电容量及检查外观.  
After -40±3(1000hrs) / room temp.,normal humidity(4 hrs)  
cycle,measure the properties.  
mentioned in Initial  
Characteristics.  
耐热性(依据 JIS C0021)  
放置于 125±2℃之环境中 1000 小時后,取出置于常温常湿中 4 满足各个特性之规格值  
Heat Resistance JIS C0021 小時后,检测直流开始放电电压缘阻抗电容量及检查外观.  
After 125±2(1000hrs) / room temp.,normal humidity(4 hrs)  
cycle,measure the properties.  
Within standard  
mentioned in Initial  
Characteristics.  
耐湿性(依据 JIS C0022)  
Humidity Resistance JIS  
C0020  
放置85±2RH85%之环境1000小時后,取出置于常温常 满足各个特性之规格值  
湿中 4 小時后,检测直流开始放电电压,绝缘阻抗,静电容量及  
检查外观。  
Within standard  
mentioned in Initial  
Characteristics.  
After 85±2, 85% RH (1000hrs)/room temp., normal humidity  
(4hrs)cycle, measure the properties.  
温度周期(依据 JISC0025)  
-40±3(30 )~(常温 3 )~125±2(30 )1 周期,重复  
满足各个特性之规格值  
Within standard  
Temperature Cycle Test (JIS 25 次后,取出置于常温常湿中 4 小時后,检测直流开始放电电压,  
C0025)  
绝缘阻抗,静电容量及检查外观.  
mentioned in Initial  
Characteristics.  
25 times repetition of cycle -40±3(30 Min.),roon temp., (4  
Min.),125±2(30 Min.),room temp., normal humidity(4hrs) .  
3
HUAAN LIMITED  
www.huaandz.com  
9 Mechanical Characteristics机构特性 :  
试验项目  
试验方法  
结果  
Test Item  
Test Method  
Result  
拉力强度(依据 JIS C0051) 施加 2.5Kgf 之荷重于导线约 30 秒钟后,检测直流开始放电电压,  
满足各个特性之规格值  
Within standard  
mentioned in Initial  
Characteristics.  
满足各个特性之规格值  
Within standard  
mentioned in Initial  
Characteristics.  
Pull Strength (JIS C0051)  
绝缘阻抗,靜电容量及检查外观. (Apply 2.5 kgs load  
approximately 30 seconds, then check for pull-out and breaking  
of the lead wire.)  
弯曲強度 (依据 JIS C0051) 距离导线熔接点根部 3mm ,使用曲率半径 0.75~0.80mm 之治  
Flexure Strength(JIS  
C0051)  
,与轴方向垂直角度,0.25Kgf 弯曲后回复原状,反复 2 次后,  
检测直流开始放电电压,绝缘阻抗,靜电容量及检查外观.(Bend  
the lead wire, with jig which radius is 0.75~0.8mm, at the point  
of 3mm from the body, under 0.25 kgs load applied at the right  
angle the direction of the amis and get the bent lead wire back  
to its original poing after the procedure was repeated 2 times.)  
10 Solder Characteristics 焊锡特性 :  
试验项目  
试验方法  
结果  
Result  
Test Item  
Test Method  
焊锡附着性  
将沾过助焊剂之导线,自距离导线熔接点根部 3mm 处起,浸于  
導線須均勻附著 90%.  
(依据 JIS C0050 4.6 ) 265±5℃之焊锡液中 5 秒钟后,将导线之助焊剂洗净后,检查焊锡附 (Lead wire is evenly  
Solderability (JIS  
C0050,4.6)  
着情形.(Apply flux and immerse in molten solder, up to the point  
covered by solder over  
of 3mm from the body,for 5 sec. (265±5). Wash the leadwire and 90%.)  
check for soldering adhesion.)  
焊锡耐热性  
(依据 JISC0051)  
Solder Heat  
将沾过助焊剂之导线,自距离导线熔接点根部 2mm 处起,浸于  
265±5℃之焊锡液中 10 秒钟后,检测直流开始放电电压,绝缘阻抗,靜电  
容量及检查外观. (Lead wire is dipped up to the point of  
2mm from the body, into 265±5solder.for 10±1 sec.And  
measure the properties.)  
满足各個特性之规格值  
Within standard  
mentioned in Initial  
Characteristics.  
(JIS C0051)  
11 Surge Characteristics 突波特性 :  
试验项目  
试验方法  
结果  
Test Item  
Test Method  
Result  
突波寿命(HAE)  
(10X700)μsec-1KV 突波,变换极向各 5 ,(100X1000)μsec-1KV 之突波,变换极向各 6 直流开始放电电压 HAE  
,每隔 30 秒施加于试料 24 次后,检测直流开始放电电压,绝缘阻抗,靜电容量及检查外观 △Vs/Vs30% (DC sparkover  
(Apply a standard impulse voltage (10X700)μsec)of 1KV for 5 times with intervals of 30 volatage HAE:  
sec., and then change the polarity of the surge and apply a impulse again. And similarly, Vs/Vs30%)  
apply a impulse voltage((100X1000)μsec) of 1KV. Total apply 24 times. Then measure  
Life(HAE)  
DC spark-over voltage, IR & Capacitance.)  
突波寿命(HAE)  
每间隔 10 秒施加 10KV 之电压于 1500PF 之电容器通过试料,200 (Apply 10 KV  
绝缘阻抗和静电电容:须满足规  
Life(HAE)  
voltage charged in 1500pF condenser and apply the current to the specimen,200 times 定值 外观:无影响使用之显著缺  
at 10 seconds of intervals.)  
(Insulation Resistance &  
Capacitance to meet the  
specified value.Appearance:  
No cracks or failures .)  
4
HUAAN LIMITED  
www.huaandz.com  
Surge Absorbers  
12 Taping 包装 :  
Mark 符号  
W
P
T
Z
L1-L2  
S
t
L
D1  
D
Dimension(mm) 52±2.0 5.0±0.5 6.0±1.0 1.2 max 0.8 max 0.8 max 3.2 max 6.7±1.0  
Φ0.5  
Φ2.6±0.3  
13 Package 装箱 :  
Item 项目  
Length  
Width  
Height  
数量 Quantity  
A=255mm  
B=75mm  
sales@huaandz.com  
5
C=68mm  
2000pcs  
HuaXinAn Electronics  
HUAAN LIMITED  
abc0734@126.com  
www.huaandz.com  
Tel:+86-755-27465585  
Surge Absorbers  
Cross Reference List (HAE)  
Cross Reference  
HUAAN Surge Absorber  
Part Number  
MITSUBISHI / Surge Absorber  
Part Number  
HAE-141N  
DSP-141N  
DSP-141N-A21F  
DSP-141N-S00B  
HAE-181N  
HAE-201M  
DSP-201M  
DSP-201M-A21F  
DSP-201M-S00B  
HAE-251M  
HAE-301M  
DSP-301N  
DSP-301N-A21F  
DSP-301N-S00B  
HAE-401M  
HAE-501M  
DSP-501N  
DSP-501N-A21F  
DSP-501N-S00B  
HAE-601M  
HAE-102M  
DSP-102M  
DSP-102M-A21F  
DSP-102M-S00B  
HAE-122M  
HAE-152M  
DSP-152M  
DSP-152M-A21F  
DSP-152M-S00B  
The above trademarks are belonging to the HUAAN LIMITED,MITSUBISHI .  
We do not ensure characteristics of HUAAN products just same as products of MITSUBISHI.  
HuaXinAn Electronics  
HUAAN LIMITED  
sales@huaandz.com  
6
abc0734@126.com  
www.huaandz.com  
Tel:+86-755-27465585  

相关型号:

HAE100

HALF-BRICK DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 100 Watts
P-DUKE

HAE100-110S05W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-110S12W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-110S15W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-110S24W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-110S28W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-110S3P3W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-110S48W

HALF-BRICK DC-DC CONVERTER
P-DUKE

HAE100-12S05

OUTPUT CURRENT UP TO 25A
P-DUKE

HAE100-12S12

OUTPUT CURRENT UP TO 25A
P-DUKE

HAE100-12S15

OUTPUT CURRENT UP TO 25A
P-DUKE

HAE100-12S24

OUTPUT CURRENT UP TO 25A
P-DUKE