JK600110U_V01 [HUAXINAN]
Resettable Fuse PTC 600V Series;型号: | JK600110U_V01 |
厂家: | HuaXinAn Electronics CO.,LTD |
描述: | Resettable Fuse PTC 600V Series |
文件: | 总3页 (文件大小:355K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
600V Series
Resettable Fuse PTC 600V Series
Features
RoHS Compliant & lead Free
Radial leaded Devices
Cured,flame retardant epoxy polymer insulating material meets UL94V-0 requirements
Operation Current: 0.11A~0.16A
Agency recognition:
Dimensions(Unit:mm)
Dimensions(mm)
Lead material
Shape
Fig
Certification
Delivery Time
Part number
in stock Produce
A(max) B(max) C(max) D(Typ) Tinned Matel(mm)
UL
TUV
-
-
3days 14days
JK600110U
JK600150U
JK600160U
15
15
15
15
15
15
5.5
5.5
5.5
5.1
5.1
5.1
22 AWG/ Φ0.6
22 AWG/ Φ0.6
22 AWG/ Φ0.6
Fig1
Fig1
Fig1
-
-
-
-
3days 14days
3days 14days
Note: Dimensions A,B,C is the maximum size,D Values is typical tolernce of ±0.75mm
thermal Derating Chart-IH(A)
Maximum ambient operating temperatures ℃
Part Number
-40℃
0.162
0.221
0.235
-20℃
0.152
0℃
0.131
0.178
0.190
25℃
40℃
50℃
60℃
70℃
85℃
JK600110U
JK600150U
JK600160U
0.11A
0.15A
0.16A
0.0913
0.125
0.133
0.0803
0.110
0.117
0.0704
0.0960
0.1024
0.0605
0.0825
0.0880
0.0462
0.063
0.207
0.221
0.0672
Specifications are subject to change without notice
1
Tel: +86-755-27465585
HUAAN LIMITED
www.huaandz.com
Email: sales@huaandz.com
600V Series
Typical Time-to-Trip Charts @25℃
A=JK600110U
B=JK600150U
C=JK600160U
Electrical characteristics(25℃)
Nominal
resistance(Ω)
V
max
interrupt
Pd
Maximum Time to
Trip
Imax
I Hold
I Trip
Max
Certification
Delivery Time
Current
(A)
Time
(S)
in stock Produce
Part Number
A
0.11
0.15
0.16
A
V
A
3
3
3
W
Rmin
UL
TUV
Rmax
-
-
3days 14days
3days 14days
3days 14days
0.22 600V
0.30 600V
0.32 600V
1.0
1.0
1.0
1.0
8
9
6
16
JK600110U
JK600150U
JK600160U
-
-
-
-
1.0
1.0
5
4
14
12
10
IHold=Hold current:maximum current at which the device will not trip at 25℃ still air.
ITrip=Trip current:minimum current at which the device will nalways at 25℃ still air.
Vmax=Maximum voltage device can withstand without damage at rated current.
Imax=Maximum fault current device can withstand tithout damage at rated voltage.
Ttrip=Maximum time to trip(s) at assigned current.
Pd=Typical power dissipation:typical amount of power dissipated by the decice when in state air environment.
Rmin=Minimum device resistance at 25℃ prior to tripping.
Rmax=Maximum device resistance at 25℃ prior to tripping.
Marking System
JK600 -XXX
Ihold
600V Max
Specifications are subject to change without notice
2
Tel: +86-755-27465585
HUAAN LIMITED
www.huaandz.com
Email: sales@huaandz.com
600V Series
Environmental Specifications
Test
Conditions
Resistance change
±8% typical
Passive aging
+85℃,1000hrs
Humidity aging
+85℃,85%R.H.1000hrs
+125℃ to -55℃,10times
MIL-STD-202,Method 215
MIL-STD-202,Method 201
±8% typical
Thermal shock
±12% typical
No change
Resistance to solvent
Vibration
No change
Wave Soldering:
Soldering Temperature:260℃~270℃
Soldering Time:≤3sec.
Soldering Position: Resettable fuse wire and the bottom ≥ 6mm。
Manual soldering
Soldering Temperature:250℃~280℃
Soldering Time: ≤3sec.
Soldering Position: Resettable fuse wire and the bottom ≥ 6mm。
Packing quantity:
JK600110U ~ JK600160U
Storage
200pcs/Bag
The maximum ambient temperature shall not exceed 40℃.Storage temperatures higher than 40℃ could result in the
deformation of packaging materials.The maximum relative humidity recommended for storage is 70%.High humidity with
high temperature can accelerate the oxidation the oxidation of the solder plating on the termination and reduce the
solderability of the components.sealed plastic bags with desiccant shall be used to teduce the oxidation of the termination
and shall only be opened prior to use.the products shall not be stored in areas where harmful gases containing sulfu of
chlorine are present.
Warning:
Please read this specification before use the product。Using of this product
must be sure to follow the requirement of this specification,operation
beyond the specified maximum ratings or improper use may result in
damage and possible electrical arcing and flame.PTC resettable fuses are
intended for occasional over current protection. Application for repeated
over current condition or prolonged trip are not anticipated.Please avoid
contact of PTC resettable fuses with chemical solvent. Prolonged contact
will damage the device performance.You are requested not to use our
product deviating from the agreed specifications.
Specifications are subject to change without notice
3
Tel: +86-755-27465585
HUAAN LIMITED
www.huaandz.com
Email: sales@huaandz.com
相关型号:
©2020 ICPDF网 联系我们和版权申明