25PV050_V01 [HY]
Photovoltaic Solar Cell Protection Schottky Diode;
| 型号： | 25PV050_V01 |
| 厂家： | 
HY ELECTRONIC CORP. |
| 描述： | Photovoltaic Solar Cell Protection Schottky Diode |
| 文件： | 总3页 (文件大小：307K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
www.hygroup.com.tw
25PV050 THRU 25PV060
Reverse Voltage - 50 to 60Volts
Forward Current - 25.0 Amperes
Photovoltaic Solar Cell Protection
Schottky Diode
Features
R- 6
● Low power loss, high efficiency
● High current capability, low VF
● High surge capacity
RoHS
COMPLIANT
Mechanical Data
● Case: JEDEC R-6 molded plastic
● Polarity: Color band denotes cathode
● Mounting position: Any
TC measurement point
Note: Products with logo
or
are made by HY Electronic (Cayman) Limited.
Applications
● For use in solar cell junction box as a bypass diode
Package Outline Dimensions in Inches (Millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
25PV050
25PV060
Characteristics
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Symbol
VRRM
VRMS
VDC
Unit
V
50
35
50
60
42
60
V
Maximum DC Blocking Voltage
V
25
I(AV)
A
Maximum Average Forward Rectified Current @TL=95 ℃
Peak Forward Surge Current, 8.3mS Single Half Sine-Wave,
Superimposed on Rated Load (JEDEC Method)
Peak Forward Voltage at 25A DC (Note1)
Maximum DC Reverse Current @TJ=25℃
at Rated DC Bolcking Voltage @TJ=100℃
Typical Thermal Resistance Junction to Lead (Note 2)
Junction Temperature Range
IFSM
VF
400
A
V
0.7
0.5
IR
mA
50
1.8
RθJL
TJ
℃/W
℃
-55 to +200
-55 to +200
Storage Temperature Range
TSTG
℃
Notes: 1. 300uS pulse width, 2%duty cycle.
2. Thermal Resistance Junction to lead / terminal at a distance 1mm from case.
3. The typical data above is for reference only .
25PV0*-A/B-00-00/01
Rev. 11, 18-May-2020
Rating and Characteristic Curves
25PV050 THRU 25PV060
Fig. 2 - Maximum Non-Repetitive Surge Current
Fig. 1 - Forward Current Derating Curve
30
450
400
350
300
250
200
150
100
50
25
20
15
10
5
8.3mS Single Half-Sine-Wave
(JEDEC METOD)
0
0
50
100
150
200
0
1
10
100
Lead Temperature (℃)
Number of Cycles at 60Hz
Fig. 3 - Typical Reverse Characteristics
Fig. 4 - Typical Forward Characteristics
100
10
25
10
Pulse Width 300uS
2%Duty Cycle
TJ=125°C
TJ=100°C
TJ=75°C
TJ=25°C
TJ=125°C
TJ=75°C
1
1
0.1
0.01
TJ=100°C
TJ=25°C
0.1
20
40
60
80
100
0
0.2
0.4
0.6
0.8
1
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Forward Voltage (V)
The curve above is for reference only.
25PV0*-A/B-00-00
Rev. 11, 18-May-2020
Legal Disclaimer Notice
Disclaimer
ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons.
HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co-
tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising
out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d-
amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch-
antability.
Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require-
ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi-
lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific-
ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet-
ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or
otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati-
ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or
selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers-
onnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any
conduct of HY. Product names and markings noted herein may be trademarks of their respective owners.
Rev. 11, 18-May-2020
相关型号：
25PX1000MT810X16
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 25V, 1000uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
RUBYCON
25PX2200MEFCCC12.5X20
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, RADIAL LEADED, ROHS COMPLIANT
RUBYCON
25PX2200MEFCCE12.5X20
CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, RADIAL LEADED, ROHS COMPLIANT
RUBYCON
25PX2200MEFCG412.5X20
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 2200uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
RUBYCON
©2020 ICPDF网 联系我们和版权申明