首页 |元器件品牌

SR520E [HY]

SCHOTTKY BARRIER RECTIFIER;
SR520E
型号： SR520E
厂家： HY ELECTRONIC CORP.    HY ELECTRONIC CORP.
描述：

SCHOTTKY BARRIER RECTIFIER
文件： 总3页 (文件大小：170K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
SR520E thru SR5200E  
REVERSE VOLTAGE  
FORWARD CURRENT - 5.0 Amperes  
- 20 to 200 Volts  
SCHOTTKY BARRIER RECTIFIER  
DO-201AE  
FEATURES  
●Guardring for overvoltage protection  
●Very small conduction losses  
●Extremely fast switching  
.
.041(1.05)  
.
.037(0.95)  
DIA.  
●Low forward voltage drop  
●High frequency operation  
●Solder dip 260°C, 40s  
1.0(25.4)  
MIN  
●Component in accordance to RoHS 2002/95/EC  
and WEEE 2002/96/EC  
.375(9.5)  
.335(8.5)  
MECHANICAL DATA  
●Case: JEDEC DO-201AE molded plastic body  
●Terminals: Plated axial leads, solderable per MIL-STD-750,  
Method 2026  
.220(5.6)  
.197(5.0)  
DIA.  
1.0(25.4)  
MIN  
●Polarity: Color band denotes cathode end  
●Mounting Position: Any  
●Weight:1.04 grams(approximate)  
Dimensions in inches and (millimeters)  
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS  
Rating at 25℃ambient temperature unless otherwise specified.  
Single phase, half wave ,60Hz, resistive or inductive load.  
For capacitive load, derate current by 20%  
SR  
SR  
SR  
SR  
SR  
SR  
SR  
SR  
SR  
SR  
SR  
SYMBOL  
UNIT  
CHARACTERISTICS  
520E 530E 540E 550E 560E 570E 580E 590E 5100E 5150E 5200E  
Maximum Recurrent Peak Reverse Voltage  
VRRM  
VRMS  
VDC  
20  
14  
20  
30  
21  
30  
40  
28  
40  
50  
35  
50  
60  
42  
60  
70  
49  
70  
80  
56  
80  
90  
63  
90  
100  
70  
150  
105  
150  
200  
140  
200  
V
V
V
Maximum RMS Voltage  
Maximum DC Blocking Voltage  
100  
Maximum Average Forward Rectified Current  
0.375”(9.5mm) Lead Length @TL=95 ℃  
Peak Forward Surge Current  
I(AV)  
5
A
IFSM  
150  
25  
8
A
8.3ms Single Half Sine-Wave  
Super Imposed on Rated Load(JEDEC Method)  
RθJA  
RθJL  
RθJC  
CJ  
℃/W  
℃/W  
℃/W  
pF  
Typical Thermal Resistance (Note2)  
15  
10  
500  
350  
0.85  
Typical Junction Capacitance (Note1)  
0.55  
0.7  
Maximum Instantaneous Forward Voltage at 5.0A DC  
VF  
0.95  
V
1.0  
50  
Maximum DC Reverse Current  
at Rated DC Blocking Voltage  
@TA=25℃  
IR  
mA  
@TA=100℃  
TJ  
-55 to + 150  
-55 to + 150  
Operating Junction Temperature Range  
Storage Temperature Range  
℃
℃
TSTG  
NOTES: 1.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC.  
2.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted  
3.The typical data above is for reference only(典型值仅供参考).  
Rev. 7, 16-Mar-2017  
RATING AND CHARACTERTIC CURVES  
SR520E thru SR5200E  
FIG. 1 - FORWAR CURRENT DERATING CURVE  
5.0  
FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT  
200  
150  
4.0  
3.0  
100  
2.0  
1.0  
50  
0
SINGLE PHASE HALF WAVE 60Hz  
PULSE WIDTH 8.3ms  
SINGLE HALF-SINE-WAVE  
(JEDEC METHOD)  
RESISTIVE OR INDUCTIVE LOAD  
0
25  
50  
75  
100  
125  
150  
175  
100  
5
50  
10  
20  
1
2
LEAD TEMPERATURE ℃  
NUMBER OF CYCLES AT 60Hz  
FIG.3-TYPICAL FORWARD CHARACTERISTICS  
FIG.4-TYPICAL REVERSE  
100  
20  
10  
SR520E-SR540E  
1
10  
TJ=100℃  
TJ=75℃  
TJ=25℃  
SR5200E  
SR550E-SR560E  
0.1  
SR580E-SR5150E  
TJ = 25°C  
1.0  
0.1  
0.01  
0.001  
0
0.1  
1.1  
1.3 1.5 1.7  
0.3  
0.5 0.7 0.9  
20  
40  
60  
80  
100  
120  
140  
0
INSTANTANEOUS FORWARD VOLTAGE,VOLTS  
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)  
FIG. 5 – TYPICAL JUNCTION CAPACITANCE  
10000  
1000  
SR520E-SR540E  
SR550E-SR5200E  
TJ = 25°C，f = 1MHz  
100  
1
10  
REVERSE VOLTAGE ,VOLTS  
100  
4
40  
The curve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)!  
Rev. 7, 16-Mar-2017  
Legal Disclaimer Notice  
Disclaimer  
ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons.  
HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co-  
tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising  
out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d-  
amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch-  
antability.  
Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require-  
ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi-  
lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties  
described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific-  
ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet-  
ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or  
otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati-  
ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or  
selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers-  
onnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any  
conduct of HY. Product names and markings noted herein may be trademarks of their respective owners.  
声明  
所有的规格及数据如因改进可靠性、功能、设计或其他原因发生变更，恕不另行通知。  
HY 对产品特定用途的适用性或任何产品的连续生产不做担保、陈述或保证。在可适用法律允许的最大程度上，HY 不承担(i) 因应  
用或使用任何产品产生的任何及全部责任，(ii) 包括但不限于特定、连带或附带损害产生的任何及全部责任，(iii) 不做任何形式默认担保，  
包括不保证特定用途的使用性、非侵权及商业适销性。  
关于产品适用于某类应用的声明以HY 掌握的HY 产品一般应用环境下的典型要求为准。此类声明与产品特定应用的适用性声明不存在  
任何关联。客户自行负责根据产品技术规格的说明认证特定产品是否适用于特定的应用。数据手册和技术规格中提供的参数可能因不同  
的应用而异，而且性能可能随时间而变化。 所有工作参数，包括电型参数，必须有客户的技术专家根据每一个客户应用环境确认。产品  
技术规格不扩展或不以其他方式修改HY 的采购条款与条件或不以其他方式修改HY 的采购条款与条件，包括但不限于规定的质保条件。  
除非书面注明，否则HY产品不用于医疗、救护或生命维护，或其他因HY 产品发生故障有可能导致人身伤亡的应用场合。客户使用或  
销售未明确指示可在上诉应用中使用的HY 产品风险自负。如欲获得有关指定用于上诉应用的产品的书面条款及条件，请与HY授权人员  
联系。  
本文档或任何 HY 的行为不以禁止反言或其他方式授予任何知识产权的许可，无论显示还是暗示。本文提到的产品名称和标识可能为  
各自所有者的商标。  
Rev. 2, 16-Mar-2017  

相关型号：

SR520E_17

 SCHOTTKY BARRIER RECTIFIER
HY

SR520H31

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H31-1

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H32

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H32-1

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H33

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H34

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H35

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H36

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H36-1

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H36-3

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON

SR520H36-4

 Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 20V V(RRM), Silicon, DO-201AD,
RECTRON
©2020 ICPDF网 联系我们和版权申明