BA7615N [ICSI]

Video signal switcher for VTR, TV; 用于VTR , TV视频信号转换器
BA7615N
型号: BA7615N
厂家: INTEGRATED CIRCUIT SOLUTION INC    INTEGRATED CIRCUIT SOLUTION INC
描述:

Video signal switcher for VTR, TV
用于VTR , TV视频信号转换器

转换器 电视
文件: 总3页 (文件大小:62K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
BA7615N  
Multimedia ICs  
Video signal switcher for VTR, TV  
BA7615N  
BA7615N has built-in 6dB amplifier, 75driver and mute function. This IC is consisted of 4 inputs (IN1, IN2, IN3, IN4), 1  
output (out) and 3 control terminals (CTL-A, CTL-B, CTL-C). Each circuit input terminal is sync tip clamp type.  
!Applications  
TV, VTR  
!External dimensions (Units : mm)  
!Features  
1) 4-input 1-output switch.  
+
2.8 0.2  
+
25.2 0.2  
2) Built-in 6dB amplifier and 75driver.  
3) Built-in mute function.  
4) Sync tip clamp input.  
1
10  
0.6  
5) Wide operating supply voltage range. (4.5V to 13.0V)  
6) Low power consumption. (Typ.100mW)  
7) Excellent frequency characteristic. (Typ.10MHz, 0dB)  
2.54  
+
0.3 0.1  
0.8  
1.3  
8) Wide dynamic range. (Typ.3.5VP-P  
)
SIP10  
9) Few cross talk between channels.  
(Typ.65dB, f=4.43MHz)  
!Absolute maximum ratings (Ta=25°C)  
Parameter  
Symbol  
Limits  
13.5  
Unit  
Supply voltage  
V
CC  
V
mW  
°C  
Power dissipation  
Pd  
850  
Operating temperature range  
Storage temperature range  
Topr  
Tstg  
25 to +75  
55 to +125  
°C  
Derating : 8.5mW per 1˚C when using this IC in Ta=25˚C above.  
!Operating voltage condition (Ta=25°C)  
Parameter  
Symbol  
Min.  
4.5  
Typ.  
5.0  
Max.  
13.0  
Unit  
V
Operating voltage range  
VCC  
This product is not designed for protection against radioactive rays.  
1/2  
BA7615N  
Multimedia ICs  
!Electrical characteristics (Unless otherwise noted, Ta=25°C, VCC=5V)  
Characteristics  
Symbol  
Min.  
Typ.  
19.5  
3.5  
Max.  
29.0  
Unit  
Conditions  
Circuit current  
I
CC  
OM  
mA  
No signal  
Max output level  
V
3.0  
5.5  
3.0  
V
P-P  
f=1KHz, THD=0.5%  
f=1KHz, 1VP-P  
Voltage gain  
G
V
F
6.0  
6.5  
1.0  
dB  
dB  
dB  
V
Frequency caharacteristics  
Channel to channel crosstalk  
CTL terminal threshold level A  
CTL terminal threshold level B  
CTL terminal threshold level C  
G
0.0  
f=10MHz / 1MHz, 1VP-P  
f=4.43MHz, 1VP-P  
CT  
65  
2.0  
VTHA  
VTHB  
VTHC  
1.0  
1.0  
1.0  
3.0  
3.0  
3.0  
CTLA threshold voltage  
CTLB threshold voltage  
CTLC threshold voltage  
2.0  
V
2.0  
V
!Application circuit  
MUTE  
6dB  
75Ω  
LOGIC  
1
2
3
4
5
6
7
8
9
10  
+
+
+
+
+
+
The output impedance has 32, please use 43resistor for outside matching.  
2/2  
Appendix  
Notes  
No technical content pages of this document may be reproduced in any form or transmitted by any  
means without prior permission of ROHM CO.,LTD.  
The contents described herein are subject to change without notice. The specifications for the  
product described in this document are for reference only. Upon actual use, therefore, please request  
that specifications to be separately delivered.  
Application circuit diagrams and circuit constants contained herein are shown as examples of standard  
use and operation. Please pay careful attention to the peripheral conditions when designing circuits  
and deciding upon circuit constants in the set.  
Any data, including, but not limited to application circuit diagrams information, described herein  
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM  
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any  
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of  
whatsoever nature in the event of any such infringement, or arising from or connected with or related  
to the use of such devices.  
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or  
otherwise dispose of the same, no express or implied right or license to practice or commercially  
exploit any intellectual property rights or other proprietary rights owned or controlled by  
ROHM CO., LTD. is granted to any such buyer.  
Products listed in this document use silicon as a basic material.  
Products listed in this document are no antiradiation design.  
The products listed in this document are designed to be used with ordinary electronic equipment or devices  
(such as audio visual equipment, office-automation equipment, communications devices, electrical  
appliances and electronic toys).  
Should you intend to use these products with equipment or devices which require an extremely high level of  
reliability and the malfunction of with would directly endanger human life (such as medical instruments,  
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other  
safety devices), please be sure to consult with our sales representative in advance.  
About Export Control Order in Japan  
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control  
Order in Japan.  
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)  
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.  
Appendix1-Rev1.0  

相关型号:

BA7622

75з driver IC with 3 internal circuits
ROHM

BA7622F

75з driver IC with 3 internal circuits
ROHM

BA7622F-E1

Interface Circuit, PDSO8, SOP-8
ROHM

BA7622F-E2

Interface Circuit, PDSO8, ROHS COMPLIANT, SOP-8
ROHM

BA7622F-T1

SPECIALTY INTERFACE CIRCUIT, PDSO8, SOP-8
ROHM

BA7622F-T2

Interface Circuit, PDSO8, SOP-8
ROHM

BA7622FE1

SPECIALTY INTERFACE CIRCUIT, PDSO8, SOP-8
ROHM

BA7622FE2

SPECIALTY INTERFACE CIRCUIT, PDSO8, ROHS COMPLIANT, SOP-8
ROHM

BA7622FT1

SPECIALTY INTERFACE CIRCUIT, PDSO8, SOP-8
ROHM

BA7622FT2

SPECIALTY INTERFACE CIRCUIT, PDSO8, SOP-8
ROHM

BA7622F_09

Standard 3-output Video Driver
ROHM

BA7623

75з driver IC with 3 internal circuits
ROHM