M630 [ICSI]
VOLTAGE CONTROLLED SAW OSCILLATOR; 压控振荡器锯型号: | M630 |
厂家: | INTEGRATED CIRCUIT SOLUTION INC |
描述: | VOLTAGE CONTROLLED SAW OSCILLATOR |
文件: | 总1页 (文件大小:90K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
P r o d u c t B r i e f
Integrated
Circuit
Systems, Inc.
M630
VOLTAGE CONTROLLED SAW OSCILLATOR
GENERAL DESCRIPTION
PIN ASSIGNMENT (1.6 x 1.8 inch SMA)
The M630 is a VCSO (Voltage Controlled SAW Oscilla-
tor) frequency source for low-jitter clock generation. Its
integrated SAW (surface acoustic wave) based oscilla-
tor and filters deliver output with exceptionally low
phase jitter. The M630 is available in a selection of
center frequencies in the 10GHz range. The M630 is
suitable for phase-locked loop implementations, clock
and data recovery circuits, and other timing applications
for the telecom and optical fiber networking markets
(OC-192/STM-64 with and without Forward Error
Correction - FEC).
M630
Glass Feed Thru
VT
Vt
GND
Vcc
GND
Glass Feed Thru VCC
SMA Connector
RF
RF
FEATURES
• VCSO center frequencies from 9.953 to 12.249 GHz
Sample of Available Output Frequencies
(Specify center frequency at time of order)
• Low phase noise -65dBc/Hz @ 1kHz offset
• Single 6.5V power supply
VCSO Center Frequency1 (GHz)
9.953 GHz
Applications
OC-192
• Small 1.6 x 1.8 inch SMA connector package
10.664 GHz
OC-192, OTU2 FEC
OC-192 FEC
12.249 GHz
1. Specify VCSO center frequency at time of order
BLOCK DIAGRAM
M630
SAW Delay Line
Bandpass Filter
Bandpass Filter
2x
4x
Frequency
Multiplier
Frequency
Multiplier
RF_OUT
Phase
Shifter
RF
Amp
VT
M630 Rev 1.1
Revised 14Nov2003
M630 Voltage Controlled SAW Oscillator
Integrated Circuit Systems, Inc. ● Communications Modules ● www.icst.com ● tel (508) 852-5400
相关型号:
M63001EBFCC135.000000MHZ
CMOS Output Clock Oscillator, 135MHz Nom, ROHS COMPLIANT, LEADLESS, CERAMIC PACKAGE-6
MTRONPTI
M63001EBFCN050.000000MHZ
CMOS Output Clock Oscillator, 50MHz Nom, ROHS COMPLIANT, LEADLESS, CERAMIC PACKAGE-9
MTRONPTI
©2020 ICPDF网 联系我们和版权申明