FC4A-AS62M [IDEC]
MicroSmart Pentra RS232 Communication Module;
| 型号： | FC4A-AS62M |
| 厂家： | 
IDEC Corporation |
| 描述： | MicroSmart Pentra RS232 Communication Module |
| 文件： | 总1页 (文件大小：190K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MicroSmart Pentra RS232 Communication Module
Features
• Up to 5 modules can be added to a MicroSmart Pentra Slim CPU
• Allows MicroSmart Pentra Slim to communicate with up to 7
serial devices
• Up to 3 modules can be added to a MicroSmart Pentra All-In-One
CPU allowing communication with up to 5 serial devices.
• Communicate with HMIs, variable frequency drives (VFD),
barcode readers, RFID equipment, printers, additional CPUs,
displays, PCs, web servers, etc.
• Screw termination for easy wiring
• The communication circuit is isolated from the internal circuit
allowing for high noise resistance
• Maximum baud rate: 38.4 kbps
Communication Specifications
Specifications
1200, 2400, 4800, 9600,
19200, 38400
General Specifications
Number of Channels
Synchronization
Baud Rate (bps)
1
Communication
Data Bits
7 or 8
Parameters
Parity
Start-stop synchronization
EIA RS232C compliant
Odd, even, none
1 or 2
Electrical Characteristics
Stop Bits
Maximum Delay in One Scan Approx. 4 ms
Maintenance
Communication
Possible (except for user pro-
gram download and upload)
Operating Temperature
Operating Humidity
0 to 55°C
Protocol
10 to 95% RH (no condensation)
Shielded multi-core cable 24AWG x 6
User Communication Possible
Recommended Cable
Specifications
Terminal Arrangement
Dielectric strength
Insulation resistance
3m
2000 V/min
100 MΩ/km
Terminal
RS (RTS)
I/O
Description
Request to Send (constant
voltage terminal)
Maximum Cable Length
Output
MC1.5/10-G-3.81BK (Phoenix Contact)
Applicable terminal block: FC4A-PMT10P (supplied)
Connector on Mother Board
ER (DTR)
SD (TXD)
RD (RXD)
DR (DSR)
SG (SG)
NC
Output
Output
Input
Data Terminal Ready
Transmit Data
Receive Data
Isolation from Internal Circuit Transformer isolated
Slim type CPU module
Maximum Number of
Communication Modules
5 max.
Input
Data Set Ready
Signal Ground
No connection
All-in-one 24-I/O type
CPU module
3 max. (see note
below)
—
—
—
—
85 mA (5V DC)
Internal Current Draw
0 mA (24V DC)
Functional ground (can be used
as junction terminals of func-
tional ground; not connected to
the internal circuit)
Weight
Approx. 100g
Note: Use only the Slim MicroSmart Pentra CPU to connect to the expansion RS232C communication modules in
combination with the function modules listed below (not applicable to the FC5A-C24R2 all-in-one module).
—
Function Module
Type No.
Mounting Hole Layout
Dimensions (mm)
FC4A-L03A1, FC4A-L03AP1, FC4A-J2A1,
FC4A-J4CN1, FC4A-J8C1, FC4A-J8AT1,
FC4A-K1A1, FC4A-K2C1
23.5
3.8
23.5
14.6
70.0
Analog I/O Module
6.3
AS-Interface Master Module
FC4A-AS62M
Notes
1. WindLDR version 5.10 or higher is required.
2. Applicable FC5A CPU firmware is version 1.10 or higher.
3. WindLDR version 5.10 allows for firmware upgrade.
3.0
∗8.5 mm when the clamp is pulled out.
IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089 • 800-262-IDEC (4332) • Fax: 408-745-5258 • www.idec.com
©2007 IDEC Corporation. All Rights Reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明