74LVCH162374APAG [IDT]
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIPFLOP;型号: | 74LVCH162374APAG |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | 3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIPFLOP PC |
文件: | 总6页 (文件大小:106K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.3V CMOS 16-BIT
IDT74LVCH162374A
EDGE TRIGGERED D-TYPE FLIP-
FLOP WITH 3-STATE OUTPUTS,
5 VOLT TOLERANT I/O, BUS-HOLD
DESCRIPTION:
FEATURES:
The LVCH162374A 16-bit edge-triggered D-type flip-flop is built using
• Typical tSK(o) (Output Skew) < 250ps
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
advanced dual metal CMOS technology. This high-speed, low-power
register is ideal for use as a buffer register for data synchronization and
storage. The output enable (OE) and clock (CLK) controls are organized
to operate each device as two 8-bit registers or one 16-bit register with
commonclock. Flow-throughorganizationofsignalpinssimplifieslayout.
All inputs are designed with hysteresis for improved noise margin.
All pins of the LVCH162374A can be driven from either 3.3V or 5V
devices. Thisfeatureallowstheuseofthisdeviceasatranslatorinamixed
3.3V/5V supply system.
The LVCH162374A has series resistors in the device output structure
which will significantly reduce line noise when used with light loads. This
driver has been developed to drive ±12mA at the designated thresholds.
The LVCH162374A has “bus-hold” which retains the inputs’ last state
whenevertheinputgoestoahighimpedance.Thispreventsfloatinginputs
and eliminates the need for pull-up/down resistors.
• VCC = 3.3V ± 0.3V, Normal Range
• VCC = 2.7V to 3.6V, Extended Range
• CMOS power levels (0.4μ W typ. static)
• All inputs, outputs, and I/O are 5V tolerant
• Available in TSSOP package
DRIVE FEATURES:
• Balanced Output Drivers: ±12mA
• Low switching noise
APPLICATIONS:
• 5V and 3.3V mixed voltage systems
• Data communication and telecommunication systems
FUNCTIONALBLOCKDIAGRAM
1
24
2OE
1OE
48
25
2CLK
1CLK
47
36
2D1
1D1
1D
C1
1D
C1
2
13
2Q1
1Q1
TO SEVEN OTHER CHANNELS
TO SEVEN OTHER CHANNELS
TheIDTlogoisaregisteredtrademarkofIntegratedDeviceTechnology,Inc.
INDUSTRIAL TEMPERATURE RANGE
JANUARY2015
1
© 2015 Integrated Device Technology, Inc.
DSC-4678/5
IDT74LVCH162374A
3.3VCMOS16-BITEDGE-TRIGGEREDD-TYPEFLIP-FLOP
INDUSTRIALTEMPERATURERANGE
ABSOLUTEMAXIMUMRATINGS(1)
PINCONFIGURATION
Symbol
VTERM
TSTG
Description
Terminal Voltage with Respect to GND
Storage Temperature
Max
Unit
V
–0.5 to +6.5
–65 to +150
–50 to +50
–50
°C
mA
mA
1CLK
1D1
1
2
48
47
46
45
44
1OE
1Q1
1Q2
IOUT
DC Output Current
IIK
IOK
Continuous Clamp Current,
VI < 0 or VO < 0
1D2
3
ICC
ISS
Continuous Current through each
VCC or GND
±100
mA
GND
4
5
6
GND
1D3
1D4
VCC
1D5
1D6
GND
1Q3
1Q4
NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
43
42
41
40
7
VCC
1Q5
8
9
1Q6
10
GND
39
38
37
36
CAPACITANCE (TA = +25°C, F = 1.0MHz)
1D7
1D8
2D1
11
12
13
14
15
16
17
18
1Q7
1Q8
2Q1
Symbol
Parameter(1)
Conditions
VIN = 0V
VOUT = 0V
VIN = 0V
Typ.
Max. Unit
CIN
Input Capacitance
Output Capacitance
I/O Port Capacitance
4.5
6
8
8
pF
pF
pF
COUT
CI/O
6.5
2D2
6.5
2Q2
35
34
NOTE:
GND
GND
1. As applicable to the device type.
33
2D3
2D4
VCC
2D5
2D6
GND
2D7
2D8
2CLK
2Q3
2Q4
VCC
2Q5
2Q6
GND
2Q7
2Q8
2OE
32
31
30
PINDESCRIPTION
Pin Names
Description
19
20
21
22
23
xDx
xCLK
xQx
Data Inputs(1)
Clock Inputs
3-State Outputs
29
28
27
26
25
xOE
3-State Output Enable Inputs (Active LOW)
NOTE:
1. These pins have "Bus-Hold". All other pins are standard inputs, outputs, or I/Os.
24
(1)
FUNCTION TABLE (EACH FLIP-FLOP)
Inputs
Outputs
TSSOP
TOP VIEW
xOE
xCLK
xDx
xQx
L
L
L
↑
↑
H
L
H
L
Q(2)
H or L
X
H
X
X
Z
NOTES:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
Z = High-Impedance
2. Output level before the indicated steady-state input conditions were established.
2
IDT74LVCH162374A
INDUSTRIALTEMPERATURERANGE
3.3VCMOS16-BITEDGE-TRIGGEREDD-TYPEFLIP-FLOP
DCELECTRICALCHARACTERISTICSOVEROPERATINGRANGE
FollowingConditionsApplyUnlessOtherwiseSpecified:
Operating Condition: TA = –40°C to +85°C
Symbol
Parameter
Test Conditions
Min.
1.7
2
Typ.(1)
—
Max.
—
Unit
VIH
Input HIGH Voltage Level
VCC = 2.3V to 2.7V
VCC = 2.7V to 3.6V
V
—
—
VIL
Input LOW Voltage Level
Input Leakage Current
VCC = 2.3V to 2.7V
VCC = 2.7V to 3.6V
—
—
—
—
0.7
0.8
V
IIH
IIL
VCC = 3.6V
VI = 0 to 5.5V
—
—
5
μA
μA
IOZH
IOZL
High Impedance Output Current
(3-State Output pins)
VCC = 3.6V
VO = 0 to 5.5V
—
—
10
IOFF
VIK
VH
Input/Output Power Off Leakage
Clamp Diode Voltage
VCC = 0V, VIN or VO ≤ 5.5V
—
—
—
50
μA
VCC = 2.3V, IIN = –18mA
–0.7
–1.2
V
Input Hysteresis
VCC = 3.3V
VCC = 3.6V
—
—
100
—
—
10
mV
ICCL
ICCH
ICCZ
Quiescent Power Supply Current
VIN = GND or VCC
μA
3.6 ≤ VIN ≤ 5.5V(2)
—
—
—
—
10
500
ΔICC
Quiescent Power Supply Current
Variation
One input at VCC - 0.6V, other inputs at VCC or GND
μA
NOTES:
1. Typical values are at VCC = 3.3V, +25°C ambient.
2. This applies in the disabled state only.
BUS-HOLDCHARACTERISTICS
Symbol
IBHH
Parameter(1)
Test Conditions
VI = 2V
Min.
–75
75
Typ.(2)
—
Max.
—
Unit
Bus-HoldInputSustainCurrent
VCC = 3V
μA
IBHL
VI = 0.8V
—
—
IBHH
Bus-HoldInputSustainCurrent
Bus-Hold Input Overdrive Current
VCC = 2.3V
VCC = 3.6V
VI = 1.7V
—
—
—
μA
μA
IBHL
VI = 0.7V
—
—
—
IBHHO
VI = 0 to 3.6V
—
—
±500
IBHLO
NOTES:
1. Pins with Bus-Hold are identified in the pin description.
2. Typical values are at VCC = 3.3V, +25°C ambient.
3
IDT74LVCH162374A
3.3VCMOS16-BITEDGE-TRIGGEREDD-TYPEFLIP-FLOP
INDUSTRIALTEMPERATURERANGE
OUTPUTDRIVECHARACTERISTICS
Symbol
Parameter
TestConditions(1)
Min.
Max.
—
Unit
VOH
Output HIGH Voltage
VCC = 2.3V to 3.6V
IOH = – 0.1mA
IOH = – 4mA
IOH = – 6mA
IOH = – 4mA
IOH = – 8mA
IOH = – 6mA
IOH = – 12mA
IOL = 0.1mA
IOL = 4mA
VCC – 0.2
V
VCC = 2.3V
VCC = 2.7V
VCC = 3V
1.9
1.7
2.2
2
—
—
—
—
2.4
2
—
—
VOL
OutputLOWVoltage
VCC = 2.3V to 3.6V
VCC = 2.3V
—
—
—
—
—
—
—
0.2
0.4
0.55
0.4
0.6
0.55
0.8
V
IOL = 6mA
VCC = 2.7V
VCC = 3V
IOL = 4mA
IOL = 8mA
IOL = 6mA
IOL = 12mA
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C.
OPERATING CHARACTERISTICS, VCC = 3.3V ± 0.3V, TA = 25°C
Symbol
Parameter
Test Conditions
Typical
—
—
Unit
CPD
PowerDissipationCapacitanceperFlip-FlopOutputsenabled
PowerDissipationCapacitanceperFlip-FlopOutputsdisabled
CL = 0pF, f = 10Mhz
pF
CPD
SWITCHINGCHARACTERISTICS(1)
VCC = 2.7V
Max.
VCC = 3.3V ± 0.3V
Symbol
tPLH
tPHL
tPZH
tPZL
tPHZ
tPLZ
tSU
Parameter
Min.
Min.
Max.
Unit
PropagationDelay
2
6.5
2
6.2
ns
ns
ns
xCLK to xQx
OutputEnableTime
1.5
1.5
6.3
6.2
1.5
1.5
6.1
6
xOE to xQx
OutputDisableTime
xOE to xQx
Set-up Time HIGH or LOW, xDx before xCLK
Hold Time HIGH or LOW, xDx after xCLK
xCLK Pulse Width HIGH or LOW
OutputSkew(2)
2.5
1.5
3
—
—
2.5
1.5
3
—
—
ns
ns
ns
ps
tH
tW
—
—
tSK(o)
—
—
—
500
NOTES:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
2. Skew between any two outputs of the same package and switching in the same direction.
4
IDT74LVCH162374A
INDUSTRIALTEMPERATURERANGE
3.3VCMOS16-BITEDGE-TRIGGEREDD-TYPEFLIP-FLOP
TESTCIRCUITSANDWAVEFORMS
TESTCONDITIONS
VIH
VT
0V
SAME PHASE
INPUT TRANSITION
Symbol VCC(1)=3.3V±0.3V VCC(1)=2.7V VCC(2)=2.5V±0.2V
Unit
V
tPHL
tPHL
tPLH
tPLH
VLOAD
VIH
6
6
2 x Vcc
Vcc
VOH
VT
VOL
OUTPUT
2.7
1.5
300
300
50
2.7
1.5
300
300
50
V
VT
Vcc / 2
150
V
VIH
VT
0V
VLZ
VHZ
CL
mV
mV
pF
OPPOSITE PHASE
INPUT TRANSITION
150
LVC Link
30
Propagation Delay
DISABLE
ENABLE
VLOAD
Open
GND
VIH
VT
0V
VCC
CONTROL
INPUT
tPZL
tPLZ
500
VIN
VLOAD/2
VOUT
VLOAD/2
VLZ
VOL
OUTPUT
NORMALLY
LOW
(1, 2)
Pulse
SWITCH
CLOSED
D.U.T.
VT
Generator
tPHZ
tPZH
SWITCH
OPEN
500
RT
VOH
VHZ
OUTPUT
NORMALLY
HIGH
CL
VT
0V
0V
LVC Link
Test Circuit for All Outputs
LVC Link
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
Enable and Disable Times
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
VIH
DATA
INPUT
VT
0V
tSU
tH
SWITCHPOSITION
VIH
VT
0V
TIMING
INPUT
Test
Switch
VLOAD
GND
Open Drain
Disable Low
Enable Low
tREM
VIH
ASYNCHRONOUS
CONTROL
VT
0V
VIH
Disable High
Enable High
SYNCHRONOUS
CONTROL
VT
tSU
0V
tH
All Other Tests
Open
LVC Link
VIH
VT
0V
Set-up, Hold, and Release Times
LOW-HIGH-LOW
INPUT
tPLH1
tPHL1
VT
PULSE
VOH
VT
tW
OUTPUT 1
VOL
tSK (x)
HIGH-LOW-HIGH
PULSE
tSK (x)
VT
VOH
LVC Link
VT
VOL
OUTPUT 2
tPLH2
tPHL2
Pulse Width
tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1
LVC Link
Output Skew - tSK(X)
NOTES:
1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs.
2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
5
IDT74LVCH162374A
3.3VCMOS16-BITEDGE-TRIGGEREDD-TYPEFLIP-FLOP
INDUSTRIALTEMPERATURERANGE
ORDERINGINFORMATION
X
XX
XXXX
XX
XX
LVC
X
Device Type Package
Bus-Hold Family
Temp. Range
Blank
8
Tube or Tray
Tape and Reel
PAG
374A
162
Thin Shrink Small Outline Package - Green
16-Bit Edge Triggered D-Type Flip-Flop
Double-Density with Resistors, 12mA
H
Bus-hold
74
-40°C to +85°C
Datasheet Document History
01/29/2015
Pg. 1,2,6 Updated the ordering information by removing the "IDT" notation, non RoHS part, SSOP package and
by adding Tape and Reel information.
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
for SALES:
for Tech Support:
logichelp@idt.com
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
6
相关型号:
74LVCH162374APVG
Bus Driver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48, GREEN, SSOP-48
IDT
74LVCH162374APVG8
Bus Driver, LVC/LCX/Z Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48, GREEN, SSOP-48
IDT
74LVCH16240ADL
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, INVERTED OUTPUT, PDSO48, Bus Driver/Transceiver
NXP
74LVCH16240ADL-T
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, INVERTED OUTPUT, PDSO48, Bus Driver/Transceiver
NXP
74LVCH16240ADLRG4
LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, INVERTED OUTPUT, PDSO48, GREEN, PLASTIC, SSOP-48
TI
74LVCH16240DL-T
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, INVERTED OUTPUT, PDSO48, Bus Driver/Transceiver
NXP
74LVCH16241DGG
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, TRUE OUTPUT, PDSO48, Bus Driver/Transceiver
NXP
74LVCH16241DGG-T
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, TRUE OUTPUT, PDSO48, Bus Driver/Transceiver
NXP
74LVCH16241DL
IC LVC/LCX/Z SERIES, QUAD 4-BIT DRIVER, TRUE OUTPUT, PDSO48, Bus Driver/Transceiver
NXP
©2020 ICPDF网 联系我们和版权申明