8203-133.000VPCNSGT [IDT]
LVCMOS Output Clock Oscillator, 133MHz Nom, GREEN, SMD, 4 PIN;型号: | 8203-133.000VPCNSGT |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | LVCMOS Output Clock Oscillator, 133MHz Nom, GREEN, SMD, 4 PIN |
文件: | 总2页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CrystalFree™ Oscillator
8203
Ultra Low Power Oscillators
PRELIMINARY DATA SHEET
Features
. Frequency Range:
. Output Type:
6 to 133MHz
CMOS
. Frequency Tolerance:
. Supply Voltage:
. Power Consumption:
. Standby Current:
. Standard Package:
± 2000 ppm
1.8v - 3.3v
1.9 mA (@ 1.8v)
<1 uA
5.0 x 3.2 mm
2.5 x 2.0 mm
This product is rated “Green”, please contact
factory for environmental compliancy information
. Operating Temperature: 0 to 70 °C , -20 to 70 °C
-20 to 85 °C, -40 to 85 °C
Specification
Parameter
Symbol
VDD
Specifications
2.5v
Conditions
Supply Voltage
1.8v
3.3v
VDD ±10%
Output Frequency
Frequency Stability
FOUT
FSTB
IDD
ISTBY
VIL
VIH
VOL
VOH
TR /TF
6 to 133 MHz
± 2000ppm
See ordering code
Total Frequency Stability over temperature, supply variation, aging (1st year at 25°C)
Supply Current
Quiescent Current
Input LOW level
Input HIGH level
Output LOW level
Output HIGH level
Rise/Fall Time
1.9 mA
2.0 mA
1 uA (max)
0.3 VDD (max)
0.7 VDD (min)
0.1 VDD (max)
0.9 VDD (min)
2.3 ns
45% / 55%
40% / 60%
4100 us
2.2 mA
Typical; No load condition; 25°C
STBY# = GND
At STBY# pin
IOL = - 1mA
IOH = 1mA
20% to 80% x VDD. Output load (CL) = 4pF
For frequencies < 80MHz;
For frequencies > 80MHz;
Output valid time after VDD meets the specified range & STBY# transition
4pF load; 75MHz
4pF load; 75MHz
2.75ns
1.9 ns
SYM
Symmetry
Start-up time
Period Jitter
Cycle to Cycle Jitter
TST
PJRMS
CCJMAX
17 ps
120 ps
6 ps
50 ps
5 ps
40 ps
Note: Above specifications are typical unless otherwise specified.
* Stability over temperature, supply variation, 3x reflow, load variation, aging (10 years)
Package Outline and Dimensions
Typical PCB Land Pattern
Pin #1 ID
Chamfer
0.5 x 45°
2.2
3.20 ±0.05
0.90 ±0.05
0.85 ±0.05
0.0-0.05
1.20 ±0.05
STBY#
GND
VDD
OUT
5.0 x 3.2
(mm)
4L SMD
5.0 x 3.2mm
5.00 ±0.05
2.54
0.203 Ref.
1.4
Side View
Top View
Bottom View
1.5
Pin #1 ID
Chamfer
0.35 x 45°
0.65 ±0.05
0.75 ±0.05
0.0-0.05
0.55 ±0.05
2.0 ±0.05
STBY#
VDD
2.5 x 2.0
(mm)
4L SMD
2.5 x 2.0mm
0.152 Ref.
2.5 ±0.05
1.225 Bsc
GND
OUT
0.8
Side View
Top View
Bottom View
June 1, 2011
www.IDT.com
©2011 Integrated Device Technology, Inc
8203 Datasheet
CrystalFree™ Oscillator
Solder Reflow Profile
Absolute Maximum Ratings
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. These ratings are
stress specifications only. Functional operation of product at
these or under any condition beyond those listed in the
operating specifications is not implied. Exposure to absolute
maximum rated conditions may affect product reliability.
40 sec (max)
245°C
250
200
150
100
50
(260°C max)
217°C
150°C
60-150
sec
60-180
sec
Item
VDD
Maximum Absolute Rating
4.6V
STBY#
OUT
Storage Temperature
-0.5V to VDD + 0.5V
-0.5V to VDD + 0.5V
-65°C to 150°C
Time
Output Wave Form
Pin Descriptions
TR
TF
Pin # Name
Description
VOH
1
2
3
4
STBY# Standby Mode1 (0 = Output Disabled)
0.8 VDD
GND
OUT2
VDD
Ground
CMOS Output
Power
0.5 VDD
1. Pulled high internally
2. Weak pull down to GND during STBY# enable and startup
0.2 VDD
VOL
t1
SYM = t1 / t2
t2
Ordering Information
R
T
1 2 5
N S G
8 2 0 3 -
V P C
Frequency
Package
Temp
Shipping
6 to 133MHz
NSG: 5.0 x 3.2 (4 pin)
NVG: 2.5 x 2.0 (4 pin)
Blank: Tubes
Blank:
0 to 70°C
-20 to 70°C
-20 to 85°C
-40 to 85°C
T:
Tape and Reel
E:
R:
I:
Sales
Technical Support
800-345-7015 (inside USA)
+1 408-284-8200 (outside USA)
Fax: 408-284-2775
crystalfreetechsupport@idt.com
+408-739-5400
6024 Silver Creek Valley Road
San Jose, California 95138
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document,
including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any
license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an
IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective
third party owners. Copyright 2010. All rights reserved.
June 1, 2011
www.IDT.com
©2011 Integrated Device Technology, Inc
相关型号:
©2020 ICPDF网 联系我们和版权申明