FXO-HC735R-29.4912 [IDT]
HCMOS Output Clock Oscillator;型号: | FXO-HC735R-29.4912 |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | HCMOS Output Clock Oscillator 机械 振荡器 |
文件: | 总14页 (文件大小:863K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model: FXO-HC73 SERIES
HCMOS 7 x 5mm 3.3V Oscillator
Freq: 0.75 MHz to 250MHz
Rev. 11/28/2007
Features
XTREMELY Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Applications
• ANY application requiring an oscillator
• SONET
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
• Ethernet
• Storage Area Network
• Broadband Access
V
DD
Enable / Disable
• Microprocessors / DSP / FPGA
• Industrial Controllers
• Test and Measurement Equipment
• Fiber Channel
FOX
OUTPUT
XPRESSO
ASICs
GND
For more information -- Click on the drawing
Contents
page
Description
Model Selection & Part Number Guide
Electrical Characteristic
Absolute Maximums
Output Wave Characteristics
Phase Noise
2
2
3
3
4
4
5
5
5
6
7
7
8
9
The Fox XPRESSO Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO utilizes a family of
proprietary ASICs, designed and developed by
Fox, with a key focus on noise reduction
technologies.
Jitter
Pin Assignment
Recommended Circuit
Reflow
Mechanical Drawing and Pad Layout
Tape and Reel Specification
Label
Traceability – LOT Number & Serial Identification
RoHS Material Declaration
SGS Report
Mechanical Test
Burn-In Test
MTTF / FITS calculations
Other XPRESSO Links
Fox Contact Information
The 3rd order Delta Sigma Modulator reduces
noise to the levels that are comparable to
traditional Bulk Quartz and SAW oscillators.
The ASICs family has ability to select the output
type, input voltages, and temperature
performance features.
10 & 11
12
12
13
14
14
With the XPRESS lead-time, low cost, low noise,
wide frequency range, excellent ambient
performance, XpressO is an excellent choice
over the conventional technologies.
Finished XPRESSO parts are 100% final tested.
Page 1 of 14
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Model Selection Guide & Fox Part Number
STEP #1: Customer selects the Model Description and provides to Fox Customer Service
Model Description
F X O – H C 7 3 6 R – 1 0 6 . 2 5 Frequency (in MHz)
Resolutions to 6 places
past the decimal point
H = HCMOS
L = LVDS
C = Ceramic
Q = Quartz
5 = 5 x 3.2mm
7 = 7 x 5mm
3 = 3.3 V
2 = 2.5 V
0 = ± 100 PPM
5 = ± 50 PPM
6 = ± 25 PPM
blank = -20°C to +70°C
R = -40°C to +85°C
8 = ± 20 PPM
M = LVDS (pin 2 E/D)
(-20 ~ +70°C)
Q = LVPECL (pin 2 E/D)
X = HCMOS (comp 2nd Output)
STEP #2: The Fox Customer Service team provides a customer specific Part Number
for use on their Bill Of Materials (BOM).
Fox Part Number (The assigned Fox Part Number must be on the BOM – not the above Model Description)
(This will ensure receipt of the proper part)
The 1st Field
Product Code #
7 6 8 – 1 0 6 . 2 5 – 2 0
The 3rd Field
Fox Internally Generated Number
(If any specification changes,
the last digits change)
(The same specs for a different customer
also changes the last digits)
767 = FXO–HC5
768 = FXO–HC7
770 = FXO–LC5
771 = FXO–LC7
773 = FXO–PC5
774 = FXO–PC7
The 2nd Field
The Customer’s Frequency
This example, FXO-HC736R-106.25 = HCMOS Output, Ceramic 7 x 5mm Package, 3.3V,
±25 PPM Stability, -40 to +85°C Temperature Range, at 106.25 MHz
Electrical Characteristics
Maximum Value
(unless otherwise noted)
Parameters
Symbol
Condition
Frequency Range
FO
0.750 to 250.000 MHz
100, 50, 25, & 20 ppm
Frequency Stability 1
Temperature Range
Supply Voltage
TO
Standard operating
Optional operating
Storage
-20°C to +70°C
-40°C to +85°C
-55°C to +125°C
TSTG
VDD
Standard
3.3 V ± 5%
0.75 ~ 20 MHz
20+ ~ 50 MHz
50+ ~ 130 MHz
130+ ~ 200 MHz
200+ ~ 250 MHz
Standard
32 mA
35 mA
47 mA
55 mA
60 mA
15 pF
30 pF
Input Current (@ 15pF LOAD)
Output Load
IDD
HCMOS
TS
Operational To 125MHz
Start-Up Time
10 mS
100 nS
1
Output Enable / Disable Time
Moisture Sensitivity Level
Termination Finish
MSL
JEDEC J-STD-20
Au
Note 1 – Stability is inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.
Page 2 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Absolute Maximum Ratings (Useful life may be impaired. For user guidelines only, not tested)
Maximum Value
Parameters
Input Voltage
Symbol
VDD
Condition
(unless otherwise noted)
–0.5V to +5.0V
–55°C to +105°C
–55°C to +125°C
150°C
Operating Temperature
Storage Temperature
Junction Temperature
ESD Sensitivity
TAMAX
TSTG
HBM
Human Body Model
1 kV
Output Wave Characteristics
Maximum Value
(unless otherwise noted)
Parameters
Symbol
Condition
0.75 to 150 MHz
150+ to 250 MHz
0.75 to 150 MHz
150+ to 250 MHz
10% VDD
20% VDD
90% VDD MIN
80% VDD MIN
Output LOW Voltage
VOL
Output HIGH Voltage
VOH
Output Symmetry (See Drawing Below)
Output Enable (PIN # 1) Voltage
Output Disable (PIN # 1) Voltage
@ 50% VDD Level
45% ~ 55%
VIH
VIL
70% V
≥
DD
30% V
≤
DD
0.75 to 150 MHz
150+ to 250 MHz
0.75 to 150 MHz
150+ to 250 MHz
3 nS
(10%~90%)
Cycle Rise Time (See Drawing Below)
TR
TF
3 nS
(20%~80%)
3 nS
(90%~10%)
Cycle Fall Time (See Drawing Below)
3 nS
(80%~20%)
If 30% to 70% times are used, Rise and Fall times change to 1.5 nS from 0.75 to 250MHz
If 20% to 80% times are used, Rise and Fall times change to 2 nS from 0.75 to 150MHz
Rise Time / Fall Time Measurements
10% to 90%
0V to VDD
30% to 70%
20% to 80%
70 - 30
Times
90% - 10%
10% - 90%
80 - 20
Times
Fall Time
Rise Time
Oscillator Symmetry
Off Time
On Time
1/2 Period
1/2 Period
50% VDD
Period
Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45
Page 3 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Phase Noise
0 dBc
Phase Noise Graph
-10dBc
-20dBc
-30dBc
-40dBc
-50dBc
-60dBc
-70dBc
-80dBc
-90dBc
(dBc / Hz) vs. offset frequency
Data Collected using HP 3048A
Three Frequencies from Jitter Tables
156.25MHz
62.5 MHz
-100dBc
-110dBc
-120dBc
-130dBc
-140dBc
106.25 MHz
62.5 MHz
156.25MHz
106.25 MHz
-150dBc
-160dBc
10
100
1k
10k
100k
1M
10M
40M
Offset Frequency (10Hz to 40MHz)
Jitter is frequency dependent. Below are typical values at select frequencies.
Phase Jitter & Time Interval Error (TIE)
Phase Jitter
T I E
Frequency
62.5 MHz
Units
pS RMS
pS RMS
pS RMS
pS RMS
(12kHz to 20MHz)
(Sigma of Jitter Distribution)
0.93
0.86
0.75
0.77
2.8
3.2
2.7
3.3
106.25 MHz
125 MHz
156.25 MHz
Phase Jitter is integrated from HP3048 Phase Noise Measurement System; measured directly into 50 ohm input; VDD = 3.3V.
TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 3.3V.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
Random & Deterministic Jitter Composition
Total Jitter (Tj)
Random (Rj) Deterministic (Dj)
Frequency
62.5 MHz
(14 x Rj) + Dj
(pS RMS)
1.28
(pS P-P)
6.8
25.1 pS
26.6 pS
25.2 pS
26.6 pS
106.25 MHz
125 MHz
1.28
8.4
1.20
8.0
1.27
156.25 MHz
8.6
Rj and Dj, measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
Page 4 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Pin Description and Recommended Circuit
Pin #
Name
Type
Logic
Function
E / D 1
GND
1
2
3
4
Enable / Disable Control of Output (0 = Disabled)
Ground
Output
Power
Hi Z
Electrical Ground for VDD
Output
HCMOS Oscillator Output
2
Power Supply Source Voltage
No Connection (Factory Use ONLY)
VDD
Test
Points
N. C.
NOTES:
1
2
Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect.
Installation should include a 0.01µF bypass capacitor placed between VDD
(Pin 4) and GND (Pin 2) to minimize power supply line noise.
E / D
VDD
4
1
0.01 F
E/D
VDD
# 1
# 2
# 4
# 3
N. C.
TP
TP
N. C.
N C
N C
GND
Output
2
GND
OUT
3
HCMOS LOAD
(15 pF)
Terminations as viewed from the Top
NOTE: XPRESSO HCMOS XOs are designed to
fit on Industry Standard, 4 pad layouts
Enable / Disable Control
Pin # 1 (state)
OPEN (No Connection)
Output (Pin # 3)
ACTIVE Output
ACTIVE Output
High Impedance
“1” Level VIH > 70% VDD
“0” Level VIL < 30% VDD
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
10 Seconds Max
within 5°C of 260°C peak
t
p
260°C
Ramp-Up
3°C/s Max
Ramp Down
Not to exceed 6°C/s
225°C
180°C
50±10 Seconds
Above 225°C Reflow Area
120 ± 20 Seconds
In Pre-heating Area
160°C
25°C
400 Seconds MAX from +25°C to 260°C peak
Page 5 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Mechanical Dimensional Drawing & Pad Layout
7.5 Max
#4
#3
Actual part marking
Top
View
is depicted.
5.2 Max
See Traceability (pg. 8)
for more information
#1
#2
Pin 1 Designator
(FOX Head or Dot)
1.4 Max
2.54
1.4
TP*
#1
#2
Bottom
View
2.6
TP*
#4
#3
5.08
Recommended
Solder Pad Layout
5.08
2.0
4.2
1.8
Note: XPRESSO HCMOS XOs are designed to fit on
industry standard, 4 pad, layouts.
Pin Connections
#1) E/D
#2 GND
#3 Output
#4 VDD
*TP are test points and are NC
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 6 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Tape and Reel Dimensions
4.0mm
Ø1.5mm
7.5mm
16mm
2.15mm
8.0mm
2k Reel Dimensions
in mm
1k Reel Dimensions
in mm
2.0
2.0
120°
Ø21.0
Ø13.0
Ø21.0
255.0
Ø13.0
2.0
80.0
178.0
62.0
2.0
2.0
17.5
17.5
Labeling (Reels and smaller packaging are labeled with the below)
Fox Part Number: 768-106.25-20
•
•
Quantity:
2000 pieces
•
Description: FXO-HC736R-106.25
•
Date Code
LOT #
0745
(YYWW 2007 45th wk)
•
24435
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 7 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Traceability – LOT Number & Serial Identification
LOT Number
The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the
“Reel” label, and also stored internally on non-volatile memory inside the XPRESSO part. XPRESSO parts
that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the
LOT Number labeled on the exterior of the ESD bag.
It is recommended that the XPRESSO parts remain in this ESD bag during storage for protection and
identification.
If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one
of the parts, and the information that can be obtained is listed below:
•
•
•
•
•
Customer Purchase Order Number
Internal Fox Sales Order Number
Dates that the XPRESSO part was shipped from the factory
The assigned customer part number
The specification that the part was designed for
Serial Identification
The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The
Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment.
With the Serial ID, the below information can be obtained about that individual, XPRESSO part:
•
•
•
•
•
•
•
Equipment that the XPRESSO part was configured on
Raw material used to configure the XPRESSO part
Traceability of the raw material back to the foundries manufacturing lot
Date and Time that the part was configured
Any optimized electrical parameters based on customer specifications
Electrical testing of the actual completed part
Human resource that was monitoring the configuration of the part
Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial
Number of any XPRESSO part produced and can then obtain the information from above within 24 hours
Page 8 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
RoHS Material Declaration
Material Name
Kovar
Component
Content
(mg)
Content
(wt%)
(CAS Number)
7440-02-0
7440-48-4
7439-89-6
1344-28-1
14808-60-7
1308-38-9
13463-67-7
1309-48-4
1305-78-8
7440-33-7
7439-98-7
7440-02-0
7440-48-4
7440-57-5
7439-89-6
7440-02-0
7440-48-4
7440-22-4
7440-50-8
7429-90-5
7440-21-3
7440-57-5
7440-22-4
Cover
Base
Nickel (Ni)
5.09
3.63%
Cobalt (Co)
3.15
2.24%
Iron (Fe)
9.47
6.75%
Ceramic
Alumina (Al2O3)
79.178
3.143
56.4%
Silicon Oxide (SiO2)
Chromium Oxide (Cr2O3)
Titanium Oxide (TiO2)
Magnesium Oxide (MgO)
Calcium Oxide (CaO)
Tungsten (W)
2.24%
3.379
2.41%
0.873
0.622%
0.311%
0.212%
8.74%
0.437
0.297
+ Metallization
12.272
0.380
Molybdenum (Mo)
0.27%
+ Nickel Plating Nickel (Ni)
Cobalt (Co)
4.740
3.38%
0.395
0.28%
+ Gold Plating
+Seal ring
Gold (Au)
0.624
0.445%
4.14%
Iron (Fe)
5.809
Nickel (Ni)
Cobalt (Co)
Silver (Ag)
Copper (Cu)
Aluminum (Al)
Silicon (Si)
Gold (Au)
3.119
2.22%
1.829
1.30%
+silver solder
2.269
1.62%
0.400
0.285%
0.00150%
0.68%
IC
IC
0.0021
0.950
Gold
0.480
0.342%
0.000150%
0.0000499%
1.45%
Adhesive
Silver (Ag)
Epoxy
0.000210
0.0000700
2.04
Crystal Crystal
Electrode
Silicon Dioxide (SiO2)
Silver (Ag)
Nickel (Ni)
Silver (Ag)
Silicon (Si)
14808-60-7
7440-22-4
7440-02-0
7440-22-4
7440-21-3
0.019
0.0135%
0.000113%
0.000264%
0.000089%
100.00%
0.000159
0.00037
0.000125
140.3
Adhesive
TOTAL
Page 9 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
3rd Party (SGS) Material Report
Page 10 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
3rd Party (SGS) Material Report (continued)
Page 11 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Mechanical Testing
Parameter
Test Method
Mechanical Shock
Drop from 75cm to hardwood surface – 3 times
10~55Hz, 1.5mm amplitude, 1 Minute Sweep
2 Hours each in 3 Directions (X, Y, Z)
Mechanical Vibration
High Temperature Burn-in
Hermetic Seal
Under Power @ 125°C for 2000 Hours (results below)
He pressure: 4 ±1 kgf / cm2 2 Hour soak
2,000 Hour Burn-In
Burn-In Testing – under power 2000 Hours, 125°C
Page 12 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
MTTF / FITS Calculations
Products are grouped together by process for MTTF calculations.
(All XpressO output and package types are manufactured with the same process)
Number of Parts Tested:
Number of Failures: 0
360 (120 of each output type: HCMOS, LVDS, LVPECL)
Test Temperature: 125°C
Number of Hours:
2000
MTTF was calculated using the following formulas:
[1.] Device Hours (devhrs) = (number of devices) x (hours at elevated temperature in °K)
devhrs× af × 2
[2.] MTTF =
χ2
1
[3.] FITS =
* 109
MTTF
Where:
Label
Name
Formula/Value
eV
k
1 1
)×( −
t1 t2
)
e(
af
Acceleration Factor
eV
k
Activation Energy
0.40 V
8.62 X 10-5 eV/°K
Bolzman’s Constant
t1
t2
Θ
r
Operating Temperature (°K)
Accelerated Temperature (°K)
Confidence Level (60% industry standard)
Number of failed devices
Theta
Failures
DEVICE-HOURS = 360 x 2000 HOURS = 720,000
0.40
1
1
(
)×(
−
)
8.625
298 398
ACCELERATION FACTOR =
= 49.91009
e
720,000× 49.91009× 2
MTTF =
= 15,607,065 Hours
1.833
1.833
Failure Rate =
= 6.41E-8
720,000× 49.91009× 2
FITS = Failure Rate *1E9 = 64
Page 13 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FXO-HC73 Series
Notes :
Other XPRESSO Links
XPRESSO Brochure
Crystal Oscillators
HCMOS 5 x 3.2mm 3.3V XO 0.75 to 250MHz
HCMOS 7 x 5mm 3.3V XO 0.75 to 250MHz
LVPECL 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz
LVPECL 7 x 5mm 3.3V XO 0.75 to 1.35GHz
LVDS 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz
LVDS 7 x 5mm 3.3V XO 0.75 to 1.35GHz
Voltage Controlled Crystal Oscillators
HCMOS 5 x 3.2mm 3.3V VCXO 0.75 to 250MHz
HCMOS 7 x 5mm 3.3V VCXO 0.75 to 250MHz
LVPECL 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz
LVPECL 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz
LVDS 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz
LVDS 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz
Main Website www.foxonline.com
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO™ Fox Electronics
Contact Information
Fox Japan
Tel:+81.3.3374.2079,
Fax: +81.3.3377.5221
Email: www.foxonline.com/email.htm
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Fox EMEA
Email: www.foxonline.com/email.htm
Tel/Fax: +44 1283 568153
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 14 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
相关型号:
©2020 ICPDF网 联系我们和版权申明