IDT74FCT244CTPG [IDT]
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, TSSOP-20;型号: | IDT74FCT244CTPG |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, TSSOP-20 驱动 光电二极管 逻辑集成电路 |
文件: | 总6页 (文件大小:62K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FAST CMOS OCTAL
BUFFER/LINE
DRIVER
IDT54/74FCT244T/AT/CT
FEATURES:
DESCRIPTION:
• Std., A, and C grades
The IDT octal buffer/line driver is built using an advanced dual metal
CMOStechnology. TheFCT244Tisdesignedtobeemployedasamemory
and address driver, clock driver, and bus-oriented transmitter/ receiver
which provides improved board density.
• Low input and output leakage ≤1µA (max.)
• CMOS power levels
• True TTL input and output compatibility:
– VOH = 3.3V (typ.)
– VOL = 0.3V (typ.)
• High Drive outputs (-15mA IOH, 64mA IOL)
• Meets or exceeds JEDEC standard 18 specifications
• Military product compliant to MIL-STD-883, Class B and DESC
listed (dual marked)
• Power off disable outputs permit "live insertion"
• Available in the following packages:
– Industrial: SOIC, SSOP, QSOP, TSSOP
– Military: CERDIP, LCC
FUNCTIONALBLOCKDIAGRAM
OEA
OEB
OA0
DB0
DA0
OB0
DA1
OB1
DA2
OB2
DA3
OB3
OA1
DB1
OA2
DB2
OA3
DB3
TheIDTlogoisaregisteredtrademarkofIntegratedDeviceTechnology,Inc.
MILITARY AND INDUSTRIAL TEMPERATURE RANGES
JUNE 2002
1
© 2002 Integrated Device Technology, Inc.
DSC-5586/2
IDT54/74FCT244T/AT/CT
FASTCMOSOCTALBUFFER/LINEDRIVER
MILITARYANDINDUSTRIALTEMPERATURERANGES
PINCONFIGURATION
INDEX
20
19
18
17
16
15
14
13
12
11
1
OEA
DA0
VCC
OEB
OA0
DB0
OA1
2
3
4
20
3 2
19
18
OB0
DA1
OB1
DA2
OB2
DA3
OA0
DB0
OA1
DA1
OB1
DA2
OB2
DA3
4
5
6
1
17
16
15
14
5
6
DB1
OA2
DB2
DB1
OA2
7
8
7
8
9 10 11 12 13
9
OA3
DB3
OB3
GND
10
LCC
TOP VIEW
CERDIP/ SOIC/ SSOP/ QSOP/ TSSOP
TOP VIEW
ABSOLUTEMAXIMUMRATINGS(1)
PINDESCRIPTION
Symbol
Description
Max
Unit
V
Pin Names
Description
(2)
VTERM
Terminal Voltage with Respect to GND
–0.5 to +7
OEA, OEB
Dxx
3-State Output Enable Inputs (Active LOW)
(3)
VTERM
Terminal Voltage with Respect to GND –0.5 to VCC+0.5
V
Inputs
TSTG
IOUT
Storage Temperature
DC Output Current
–65 to +150
–60 to +120
°C
mA
Oxx
Outputs
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability. No terminal voltage may exceed
Vcc by +0.5V unless otherwise noted.
FUNCTIONTABLE(1)
Inputs
2. Inputs and Vcc terminals only.
3. Output and I/O terminals only.
OEA
L
OEB
L
D
L
Outputs
L
H
Z
L
L
H
X
H
H
CAPACITANCE (TA = +25°C, F = 1.0MHz)
NOTE:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
Z = High Impedance
Symbol
Parameter(1)
Input Capacitance
Output Capacitance
Conditions
Typ.
Max. Unit
CIN
VIN = 0V
6
8
10
12
pF
pF
COUT
VOUT = 0V
NOTE:
1. This parameter is measured at characterization but not tested.
2
IDT54/74FCT244T/AT/CT
MILITARYANDINDUSTRIALTEMPERATURERANGES
FASTCMOSOCTALBUFFER/LINEDRIVER
DCELECTRICALCHARACTERISTICSOVEROPERATINGRANGE
FollowingConditionsApplyUnlessOtherwiseSpecified:
Industrial: TA = –40°C to +85°C, VCC = 5.0V ±5%; Military: TA = –55°C to +125°C, VCC = 5.0V ±10%
Symbol
VIH
Parameter
Input HIGH Level
Test Conditions(1)
Guaranteed Logic HIGH Level
Min.
2
Typ.(2)
—
Max.
—
Unit
V
VIL
Input LOW Level
Guaranteed Logic LOW Level
VCC = Max.
—
—
—
—
—
—
—
—
—
—
0.8
±1
±1
±1
±1
±1
–1.2
—
V
IIH
Input HIGH Current(4)
Input LOW Current(4)
High Impedance Output Current
(3-State output pins)(4)
Input HIGH Current(4)
ClampDiodeVoltage
Input Hysteresis
VI = 2.7V
VI = 0.5V
VO = 2.7V
VO = 0.5V
—
µA
µA
µA
IIL
VCC = Max.
—
IOZH
IOZL
VCC = Max
—
—
II
VCC = Max., VI = VCC (Max.)
VCC = Min, IIN = -18mA
—
µA
V
VIK
VH
ICC
–0.7
200
0.01
—
mV
mA
Quiescent Power Supply Current
VCC = Max., VIN = GND or VCC
1
OUTPUTDRIVECHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
Min.
Typ.(2)
Max.
Unit
VOH
Output HIGH Voltage
VCC = Min
VIN = VIH or VIL
IOH = –6mA MIL
IOH = –8mA IND
IOH = –12mA MIL
IOH = –15mA IND
IOL = 48mA MIL
IOL = 64mA IND
2.4
3.3
—
V
2
3
—
VOL
IOS
OutputLOWVoltage
Short Circuit Current
VCC = Min
VIN = VIH or VIL
VCC = Max., VO = GND(3)
—
0.3
0.55
–225
V
–60
–120
mA
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Not more than one output should be tested at one time. Duration of the test should not exceed one second.
4. The test limit for this parameter is ±5µA at TA = –55°C.
3
IDT54/74FCT244T/AT/CT
FASTCMOSOCTALBUFFER/LINEDRIVER
MILITARYANDINDUSTRIALTEMPERATURERANGES
POWERSUPPLYCHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
Min.
Typ.(2)
Max.
Unit
∆ICC
Quiescent Power Supply Current
TTL Inputs HIGH
VCC = Max.
VIN = 3.4V(3)
—
0.5
2
mA
ICCD
Dynamic Power Supply
Current(4)
VCC = Max.
Outputs Open
VIN = VCC
VIN = GND
—
0.15
0.25
mA/
MHz
OEA = OEB = GND
One Input Toggling
50% Duty Cycle
IC
Total Power Supply Current(6)
VCC = Max.
Outputs Open
fi = 10MHz
VIN = VCC
VIN = GND
—
—
—
—
1.5
1.8
3
3.5
4.5
mA
50% Duty Cycle
OEA = OEB = GND
One Bit Toggling
VIN = 3.4V
VIN = GND
(5)
VCC = Max.
Outputs Open
fi = 2.5MHz
VIN = VCC
VIN = GND
6
50% Duty Cycle
OEA = OEB = GND
Eight Bits Toggling
VIN = 3.4V
VIN = GND
5
14(5)
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input; (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of ∆ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2+ fiNi)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Output Frequency
Ni = Number of Outputs at fi
All currents are in milliamps and all frequencies are in megahertz.
SWITCHINGCHARACTERISTICSOVEROPERATINGRANGE
54FCT244T
54/74FCT244AT
Ind. Mil.
Min.(2) Max. Min.(2) Max.
54/74FCT244CT
Mil.
Min.(2) Max.
Ind.
Min.(2) Max.
Mil.
Min.(2) Max. Unit
Symbol
tPLH
Parameter
PropagationDelay
Dx to Ox
Condition(1)
CL = 50pF
RL = 500Ω
1.5
1.5
1.5
7
1.5
1.5
1.5
4.8
6.2
5.6
1.5
1.5
1.5
5.1
6.5
5.9
1.5
1.5
1.5
4.1
5.8
5.2
1.5
1.5
1.5
4.6
6.5
5.7
ns
ns
ns
tPHL
tPZH
OutputEnableTime
8.5
7.5
tPZL
tPHZ
OutputDisableTime
tPLZ
NOTES:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
4
IDT54/74FCT244T/AT/CT
MILITARYANDINDUSTRIALTEMPERATURERANGES
FASTCMOSOCTALBUFFER/LINEDRIVER
TESTCIRCUITSANDWAVEFORMS
VCC
SWITCHPOSITION
7.0V
Test
Switch
Closed
Open
500Ω
Open Drain
Disable Low
Enable Low
VOUT
VIN
Pulse
Generator
D.U.T
.
All Other Tests
50pF
500Ω
T
R
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
L
C
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
Octal link
Test Circuits for All Outputs
3V
DATA
1.5V
0V
INPUT
LOW-HIGH-LOW
tH
tSU
1.5V
PULSE
3V
1.5V
0V
TIMING
INPUT
ASYNCHRONOUS CONTROL
tW
tREM
PRESET
CLEAR
ETC.
3V
1.5V
0V
HIGH-LOW-HIGH
PULSE
1.5V
SYNCHRONOUS CONTROL
PRESET
3V
Octal link
1.5V
0V
CLEAR
tSU
tH
CLOCK ENABLE
ETC.
Pulse Width
Octal link
Set-Up, Hold, and Release Times
ENABLE
DISABLE
3V
1.5V
0V
3V
SAME PHASE
CONTROL
INPUT
1.5V
0V
INPUT TRANSITION
tPLH
tPLH
tPHL
tPHL
tPZL
tPLZ
VOH
1.5V
VOL
OUTPUT
3.5V
1.5V
3.5V
VOL
VOH
OUTPUT
NORMALLY
LOW
SWITCH
CLOSED
0.3V
0.3V
3V
1.5V
0V
tPZH
tPHZ
OPPOSITE PHASE
INPUT TRANSITION
OUTPUT
NORMALLY
HIGH
SWITCH
OPEN
1.5V
0V
Octal link
0V
Octal link
Propagation Delay
Enable and Disable Times
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
5
IDT54/74FCT244T/AT/CT
FASTCMOSOCTALBUFFER/LINEDRIVER
MILITARYANDINDUSTRIALTEMPERATURERANGES
ORDERINGINFORMATION
XXXX
XX
X
IDT
XX
FCT
Package
Process
Device Type
Temp. Range
Blank
B
Industrial
MIL-STD-883, Class B
Industrial Options
SO
PY
Q
Small Outline IC
Shrink Small Outline Package
Quarter-size Small Outline Package
Thin Shrink Small Outline Package
PG
Military Options
CERDIP
Leadless Chip Carrier
D
L
Fast CMOS Octal Buffer/Line Driver
244T
244AT
244CT
54
74
– 55°C to +125°C
– 40°C to +85°C
CORPORATE HEADQUARTERS
2975StenderWay
Santa Clara, CA 95054
for SALES:
800-345-7015 or 408-727-6116
fax: 408-492-8674
for Tech Support:
logichelp@idt.com
(408) 654-6459
www.idt.com
6
相关型号:
IDT74FCT244CTPGG
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, GREEN, TSSOP-20
IDT
IDT74FCT244CTPV
Bus Driver, FCT Series, 2-Func, 4-Bit, Inverted Output, CMOS, PDSO20, 1.27 MM PITCH, EIAJ, SO-20
IDT
IDT74FCT244CTPYG
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, GREEN, SSOP-20
IDT
IDT74FCT244CTPYG8
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, GREEN, SSOP-20
IDT
IDT74FCT244CTQG
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, GREEN, QSOP-20
IDT
IDT74FCT244CTSOG
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, GREEN, SOIC-20
IDT
IDT74FCT244CTSOG8
Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20, GREEN, SOIC-20
IDT
©2020 ICPDF网 联系我们和版权申明