MK0220-01STRLF [IDT]
Video Clock Generator, 40MHz, PDSO16, 0.150 INCH, SOIC-16;型号: | MK0220-01STRLF |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | Video Clock Generator, 40MHz, PDSO16, 0.150 INCH, SOIC-16 时钟 光电二极管 外围集成电路 晶体 |
文件: | 总4页 (文件大小:31K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
P R E LI M I N AR Y I N F O R M AT I O N
P R E LI M I N AR Y I N F O R M AT I O N
MK0220
Video CD Clock Source
Description
Features
The MK0220 provides clocks for video CD
systems. It is designed to work specifically with
the C-Cube CL480, and supports audio DAC’s
like the Crystal CS4333, and NTSC/PAL
encoders such as Brooktree’s Bt851.
• Packaged in 16 pin narrow (150 mil) SOIC
• Fully compatible with C-Cube CL480
• Supports Crystal Semiconductor’s CS4333
• Supports timing for Bt851 NTSC/PAL encoder
• CD clock input eliminates crystals and oscillators
• All clocks are frequency-locked to the CD clock
• 2.7V to 5.5V operation
The chip uses MicroClock’s proprietary analog
Phase-Locked Loop technology, and locks to the
CD output reference clock of 2.1168 MHz to
produce four output clocks.
MicroClock can customize this device for any
different frequencies for a small NRE.
• Zero ppm error 16.9344, 13.5, 27.0 MHz clocks
• Power down mode reduces IDD to 10µA (typ)
Block Diagram
VDD
GND
3
5
Output
Buffer
40 MHz
(GCK)
PD
Output
Buffer
27 MHz
(VCK)
Clock Synthesis
and Control
Circuitry
2.1168 MHz
Output
Buffer
13.5 MHz
clock
X1
Clock
Buffer/
Crystal
Output
Buffer
16.9344 MHz
(DA-XCK)
Oscillator
X2
Signal names in parentheses under the outputs indicate the corresponding input pins of the CL480 needing
this clock.
MDS0220D
1
Revision 10055
Printed 11/4/97
MicroClock Incorporated•1171 North Fourth St.•San Jose•CA•95112•(408)295-9800tel•(408)295-9818fax
P R E LI M I N AR Y I N F O R M AT I O N
P R E LI M I N AR Y I N F O R M AT I O N
MK0220
Video CD Clock Source
Pin Assignment
1
2
3
4
5
6
7
8
16
15
PD
GND
NC
X2
See note
14
13
12
11
10
9
13.5M
VDD
X1/ICLK
VDD
Note on reference input - the MK0220 is
designed to be used with a clock input into
pin 3. This clock will come from the CD kit.
While the chip can also be used with a
2.1168 MHz crystal, this is not a commonly
stocked value. If a 2.1168 MHz clock is not
available, contact MicroClock for other
devices.
GND
GND
GND
VDD
40M
27M
16.93M
GND
16 pin narrow SOIC
Pin Descriptions
Number
Name
GND
X2
Type Description
1
2
P
O
I
Connect to ground.
Crystal connection. Leave unconnected for clock input, or connect to 2.1168 MHz crystal.
3
X1/ICLK
VDD
GND
VDD
40M
Crystal connection. Connect to 2.1168 MHz input clock from CD (or crystal). See note above.
4
P
P
P
O
P
O
O
P
P
P
O
-
Connect to +3.3V.
5
Connect to ground.
6
Connect to +3.3V.
7
40 MHz clock output. Use for GCK on CL480.
8
GND
16.9M
27M
Connect to ground.
9
16.9344 MHz clock output. Use for DA-XCK on CL480, MCLK on CS4333.
10
11
12
13
14
15
16
27.00 MHz clock output. Leads 13.5M by 5ns. Use for VCK on CL480, NTSC/PAL encoder.
GND
GND
VDD
13.5M
NC
Connect to ground.
Connect to ground.
Connect to +3.3V.
13.5 MHz clock output. Lags 27M by 5ns.
No Connect.
PD
I
Power down. Stops all clocks low when this pin is taken low.
Type: I = Input, O = output, P = power supply connection
MDS0220D
2
Revision 10055
Printed 11/4/97
MicroClock Incorporated•1171 North Fourth St.•San Jose•CA•95112•(408)295-9800tel•(408)295-9818fax
P R E LI M I N AR Y I N F O R M AT I O N
P R E LI M I N AR Y I N F O R M AT I O N
MK0220
Video CD Clock Source
External Components
The MK0220 requires a minimum number of external components for proper operation. Decoupling
capacitors of 0.1µF should be connected between VDD and GND on pins 4/5 and pins 13/12, as close to
the MK0220 as possible. A series termination resistor of 33Wmay be used for each clock output. The device
does not require (nor do we recommend) capacitors connected to the crystal pins. If a 2.1168 MHz crystal
is used, it must be connected as close to the chip as possible. Recommended load capacitance for the crystal
is 12pF.
Electrical Specifications
Parameter
Conditions
Minimum
Typical
Maximum
Units
ABSOLUTE MAXIMUM RATINGS (Note 1)
Supply Voltage, VDD
Referenced to GND
7
VDD+0.5
70
V
V
Inputs and Clock Outputs
Ambient Operating Temperature
Soldering Temperature
-0.5
0
°C
°C
°C
Max of 20 seconds
260
Storage Temperature
-65
150
DC CHARACTERISTICS
Operating Voltage, VDD
2.7
2
5.5
0.8
V
V
Input High Voltage, VIH
Input Low Voltage, VIL
V
Output High Voltage
IOH=-4mA
VDD-0.4
2.4
V
Output High Voltage
IOH=-25mA
V
Output Low Voltage
IOL=25mA
0.4
20
16
V
Operating Supply Current, IDD
Operating Supply Current, IDD
Standby Supply Current, IDD, at 3.6V
Short Circuit Current
No Load, VDD=3.6V
No Load, VDD=3.0V
No Load, PD=0V
Each output
16
12
mA
mA
µA
mA
pF
pF
ppm
ppm
10
±100
15
Input Capacitance, X1 and X2 pins
Input Capacitance
7
Actual mean frequency error versus target
Actual mean frequency error versus target
AC CHARACTERISTICS
40.0MHz output only
Note 2
±100
0
Input Frequency
2.1168
MH z
ns
Output Clock Rise Time
0.8 to 2.0V
2.0 to 0.8V
At VDD/2
1.5
1.5
55
1
Output Clock Fall Time
ns
Output Clock Duty Cycle, High Time
Power down Time, PD taken low to clocks off
Power up Time, PD taken high to clocks stable
Note:
45
49 to 51
2.5
%
µs
5
ms
1. Stresses beyond those listed under Absolute Maximum Ratings could cause permanent damage to the device. Prolonged exposure
to levels above the operating limits but below the Absolute Maximums may affect device reliability.
2. For the 13.5MHz, 16.9MHz, and 27MHz outputs
MDS0220D
3
Revision 10055
Printed 11/4/97
MicroClock Incorporated•1171 North Fourth St.•San Jose•CA•95112•(408)295-9800tel•(408)295-9818fax
P R E LI M I N AR Y I N F O R M AT I O N
P R E LI M I N AR Y I N F O R M AT I O N
MK0220
Video CD Clock Source
Package Outline and Package Dimensions
16 pin SOIC narrow
Inches
Symbol Min
Millimeters
Min Max
Max
A
b
0.055 0.070 1.397
0.013 0.019 0.330
0.007 0.010 0.190
1.778
0.483
0.254
E
H
c
D
E
H
e
0.385 0.400 9.779 10.160
0.150 0.160 3.810
0.225 0.245 5.715
4.064
6.223
.050 BSC
0.016
0.01
1.27 BSC
h
0.406
0.254
h x 45°
Q
0.004
0.102
D
A
c
Q
b
e
Ordering Information
Part/Order Number
Marking
Package
Temperature
MK0220-01S
MK0220-01S
MK0220-01S
16 pin narrow SOIC
Add Tape & Reel
0-70°C
0-70°C
MK0220-01STR
While the information presented herein has been checked for both accuracy and reliability, MicroClock Incorporated assumes no responsibility for either its use or for the
infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in
normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements
are not recommended without additional processing by MicroClock. MicroClock reserves the right to change any circuitry or specifications without notice. MicroClock does not
authorize or warrant any MicroClock product for use in life support devices or critical medical instruments.
CHANGE HISTORY
Version Date first published
Comments
A
B
C
6/1/95
6/22./95
9/18/95
Original
Changed operating voltage from 3.0-4.0V to 2.7V-3.6V. Corrected pin 14. Added 40MHz accuracy.
Changed operating volyage to 2.7V-5.5V. Added specific pins for decoupling caps.
MDS0220D
4
Revision 10055
Printed 11/4/97
MicroClock Incorporated•1171 North Fourth St.•San Jose•CA•95112•(408)295-9800tel•(408)295-9818fax
相关型号:
MK0227100FAT2A
Ceramic Capacitor, Multilayer, Ceramic, 200V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.00001uF, Surface Mount, 0402, CHIP, ROHS COMPLIANT
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明