SF0140BA02434S [IDT]
SAW Filter, 1 Function(s), 140MHz, ROHS COMPLIANT, CERAMIC, SMP-10;型号: | SF0140BA02434S |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | SAW Filter, 1 Function(s), 140MHz, ROHS COMPLIANT, CERAMIC, SMP-10 LTE |
文件: | 总3页 (文件大小:75K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
140 MHz SAW Filter
14.4 MHz Bandwidth
Part Number: SF0140BA02434S
DESCRIPTION
•
•
•
140 MHz SAW bandpass filter with 14.4 MHz bandwidth.
24.6 x 9 mm SMP package.
RoHS compliant.
TYPICAL PERFORMANCE
Horizontal:
Vertical from top:
Frequency:
Relative Magnitude :
Relative magnitude :
5
MHz/div
10 dB/div
dB/div
1
Group Delay Deviation : 500 ns/div
S11 (133-147 MHz)
S22 (133-147 MHz)
IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456
www.idt.com
DSSF0140BA02434S Rev A 24-Aug-2006
Page 1 of 3
140 MHz SAW Filter
14.4 MHz Bandwidth
Part Number: SF0140BA02434S
SPECIFICATION
Parameter
Center Frequency FC
Min
139.70
Typ
140.00
19.8
14.75
15.06
15.90
16.33
131.844
148.26
0.7
30
2.08
48
48
42
Max
140.30 MHz
22
-
Units
1
Minimum Insertion Loss
-
dB
1 dB Bandwidth 2
14.4
15.0
-
-
MHz
MHz
MHz
MHz
MHz
3 dB bandwidth 2
-
20 dB Bandwidth 2
16.10
16.50
-
148.50 MHz
1.0
40 dB Bandwidth 2
Lower 45 dB Band Edge 2
Upper 45 dB Band Edge 2
Amplitude Variation (Fc +/- 7 MHz)
Group Delay Variation (Fc +/- 7 MHz)
Absolute Delay
131.50
-
--
-
dB p-p
ns p-p
us
dB
dB
dB
dB
dB
ppm/˚C
˚C
60
2.10
-
Rejection (129 to 131.5)
Rejection (148.5 to 151 MHz)
Rejection (40 to 129 MHz)
Rejection (151 to 190 MHz)
Rejection (190 to 400 MHz)
Temperature Coefficient of Frequency
Ambient Temperature
45
45
45
45
45
-
-
-
-
-
-
-
-
51
52
-94
25
-
Notes:
1. Defined as the average of the lower and upper 3 dB frequencies.
2. All dB levels are defined relative to the insertion loss at 63 MHz.
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Operating Temperature Range
Input Power Level
Min
-40
0
Max
85
70
Units
˚C
˚C
dBm
-
10
MATCHING CIRCUIT
10
5
Input
50 Ω
Single-ended
Output
50 Ω
Single-ended
All others
GND
GND
Typical component values:
(Minimum inductor Q = 40)
Ls1
Cp1
=
=
33 nH
27 pF
Ls2
Cp2 =
=
56 nH
27 pF
Notes:
1. Recommend use of 2% tolerance matching components.
2. Component values are for reference only and may change depending on board layout.
IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456
www.idt.com
DSSF0140BA02434S Rev A 24-Aug-2006
Page 2 of 3
140 MHz SAW Filter
14.4 MHz Bandwidth
Part Number: SF0140BA02434S
PACKAGE OUTLINE
SUGGESTED FOOTPRINT
Index Mark
Units: mm
Tolerances are ±0.15 mm except
for the overall length, width and
pad dimensions, which are nominal
values.
Package Material:
Body: Al2O3 ceramic
Pad Configuration:
Input:
Input return:
Output:
10
1
5
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm min,
over a 1.3-8.9 µm Ni plating
Output return:
Ground:
6
2,3,4,7,8,9
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice.
© 2006 All rights reserved.
IDT • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Ph 1-508-852-5400 • Fax 1-508-852-8456
www.idt.com
DSSF0140BA02434S Rev A 24-Aug-2006
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明