ZIOL2411 [IDT]

IO-Link compliant HV Line Driver (Dual Channel);
ZIOL2411
型号: ZIOL2411
厂家: INTEGRATED DEVICE TECHNOLOGY    INTEGRATED DEVICE TECHNOLOGY
描述:

IO-Link compliant HV Line Driver (Dual Channel)

文件: 总3页 (文件大小:87K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
ZIOL2411  
Feature Sheet  
IO-Link compliant HV Line  
Driver (Dual Channel)  
Brief Description  
Benefits  
The ZIOL2411 is a line driver/level shifter IC that  
provides two independent HV* I/O channels with a  
wide range of configurable system features. It  
addresses the physical layer of sensor/actuator sys-  
tems in factory automation applications and is speci-  
fically designed to support the communication  
standard IO-Link .  
Configurable feature set  
Nonvolatile storage of system configuration  
Excellent electromagnetic compatibility (EMC)  
performance due to adjustable output slew rate  
control  
Low RDSon of 3.3in tandem mode  
Programmable limitation of driver output current  
The output drivers are push-pull stages, which in  
tandem mode reach an RDSon of less than 3.3at all  
operational temperatures.  
EEPROM read/write functionality within entire  
operating temperature range  
Space saving 4x4 mm² 24-pin QFN  
The configuration is stored in an on-chip EEPROM  
and automatically loaded into the ZIOL2411’s control  
register during power up. The ZIOL2411 also  
provides status information, such as overload and  
over-temperature conditions. An integrated SPI inter-  
face supports access to configuration and status  
registers.  
Available Support  
Evaluation Kits  
Application Notes  
Physical Characteristics  
The ZIOL2411 is fabricated in a powerful CMOS  
mixed signal technology that allows supply voltages  
up to 40V. The EEPROM read/write functionality is  
guaranteed within the entire operating temperature  
range in combination with a low-voltage core supply  
of 3.3V.  
Operation temperature: -40 to +85 °C  
Supply voltage 8.0 to 36.0 V  
RoHS-compliant QFN-24 package  
ZIOL2411 Application Circuits  
Features  
Configurable output current limits 56mA to  
410mA per channel  
SIO  
sensor  
ZIOL2411  
Traditional PLC  
Standard cable driver/ physical layer transceiver  
for IO-Link (master and device)  
IO-L  
IO-L  
sensor  
ZIOL2411  
ZIOL2411  
ZIOL24x1  
ZIOL24x1  
Slew-rate controlled drivers  
Wide range for configurable feature set, which is  
automatically loaded after power-on reset  
IO-Link-specific WURQdetection  
actuator  
IO-Link  
PLC  
(master)  
On chip registers and EEPROM for system  
configuration and status information  
IO-L  
sensor  
sensor  
ZIOL2411  
ZIOL2411  
ZIOL24x1  
SPI interface for accessing on-chip registers and  
EEPROM  
Digital interface: 3.3V output, 5V tolerant inputs  
IC temperature monitoring/diagnosis  
Over-current and over-temperature indication  
* High voltage (maximum power supply / signal swing is 36 volt)  
IDT is a member of the IO-Link Consortium: www.io-link.com  
IO-Link device wake-up  
© 2016 Integrated Device Technology, Inc.  
1
January 28, 2016  
 
 
 
ZIOL2411  
Feature Sheet  
IO-Link compliant HV Line  
Driver (Dual Channel)  
Typical Applications  
ZIOL2411 Overview  
In field applications, the ZIOL2411  
acts as a universal cable driver.  
The ZIOL2411 can support IO-Link  
communications as a physical-layer  
transceiver (PHY) for IO-Link  
Cable Side  
High Voltage (HV)  
Signals  
Application Side  
Low Voltage (LV) Signals  
ZIOL2411  
devices and IO-Link masters.  
Power  
Supply  
Configuration  
Diagnosis  
Control  
Common applications:  
Dual channel  
transceiver  
24V line driver/level shifter  
IO-Link-compliant devices  
IO-Link-compliant masters  
COM  
Power  
Actuator,  
Sensor,  
or  
Interface  
to Host  
System  
RX/TX  
RX/TX  
Ch 0  
Ch 1  
Application  
Circuit  
Cable  
See the ZIOL2xxx IC Family Data Sheet  
for detailed technical information.  
AUX  
GND  
Ordering Information  
Product Sales Code  
ZIOL2411BI1R  
Description  
Package  
13” reel  
7” reel  
Dual Channel IO-Link compliant HV Line Driver, 4x4mm QFN24  
Dual Channel IO-Link compliant HV Line Driver, 4x4mm QFN24  
ZIOL2411BI1W  
IO-Link Lab Kit V2.0  
#3600100858  
ZIOL2401 Lab Kit for detailed laboratory evaluation: configurable IC/Communication/Controller  
Board, USB cable; software is available for download at www.IDT.com with a free customer login  
(see data sheet for details).  
ZIOL2401 Starter-Kit  
#3600100369  
ZIOL2401 Starter Kit for product demonstration: USB stick, extension board, downloadable  
software  
Corporate Headquarters  
6024 Silver Creek Valley Road  
San Jose, CA 95138  
Sales  
Tech Support  
www.IDT.com/go/support  
1-800-345-7015 or 408-284-8200  
Fax: 408-284-2775  
www.IDT.com/go/sales  
www.IDT.com  
DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance  
specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The  
information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an  
implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property  
rights of IDT or any third parties.  
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be  
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.  
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the  
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated  
Device Technology, Inc. All rights reserved.  
© 2016 Integrated Device Technology, Inc.  
2
January 28, 2016  
ZIOL2411  
Feature Sheet  
IO-Link compliant HV Line  
Driver (Dual Channel)  
Revision  
Date  
Description  
2.20  
August 12, 2015  
Updates for order codes.  
Update for template and contact information.  
Update for information about software download.  
Minor edits for clarity.  
January 28, 2016  
Changed to IDT branding.  
Corporate Headquarters  
6024 Silver Creek Valley Road  
San Jose, CA 95138  
Sales  
Tech Support  
www.IDT.com/go/support  
1-800-345-7015 or 408-284-8200  
Fax: 408-284-2775  
www.IDT.com/go/sales  
www.IDT.com  
DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance  
specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The  
information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an  
implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property  
rights of IDT or any third parties.  
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be  
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.  
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the  
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated  
Device Technology, Inc. All rights reserved.  
© 2016 Integrated Device Technology, Inc.  
3
January 28, 2016  

相关型号:

ZIOL2411BI1R

IO-Link compliant HV Line Driver (Dual Channel)
IDT

ZIOL2411BI1W

IO-Link compliant HV Line Driver (Dual Channel)
IDT

ZIOL2412

IO-Link compliant HV Line Driver IC Family
ETC

ZIP-16

IC Socket, ZIP16, 16 Contact(s), 1.27mm Term Pitch, 0.1inch Row Spacing, Solder
MARKTECH

ZIP-18

IC Socket, ZIP18, 18 Contact(s), 1.27mm Term Pitch, 0.1inch Row Spacing, Solder
MARKTECH

ZIP-20

IC Socket, ZIP20, 20 Contact(s), 1.27mm Term Pitch, 0.1inch Row Spacing, Solder
MARKTECH

ZIP-28

IC Socket, ZIP28, 28 Contact(s), 1.27mm Term Pitch, 0.1inch Row Spacing, Solder
MARKTECH

ZIP14-T-SAF

IC Socket
AMPHENOL

ZIP16-T-SAF

IC Socket
AMPHENOL

ZIP16T

IC Socket, ZIP16, 16 Contact(s), 2.54mm Term Pitch, 0.1inch Row Spacing, Solder
ADAM-TECH

ZIP18-T-SAF

IC Socket
AMPHENOL

ZIP18T

IC Socket, ZIP18, 18 Contact(s), 2.54mm Term Pitch, 0.1inch Row Spacing, Solder
ADAM-TECH