I593-32Q3O-245.000 [ILSI]
LVCMOS Output Clock Oscillator,;型号: | I593-32Q3O-245.000 |
厂家: | ILSI |
描述: | LVCMOS Output Clock Oscillator, |
文件: | 总3页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.2 mm x 2.5 mm 6 Pads SMD TCXO or TC/VCXO Oscillator
I593 / I793 Series
Product Features:
Applications:
Server & Storage
CDMA / WCDMA
802.11 / Wifi
Advanced PLL Technology
1.5 pSec Phase Jitter typ.
Fast Delivery
3.20±0.10
RoHS and Lead Free Compliant
T1/E1, T3/E3
2.50±0.10
Frequency
LVCMOS
2.00±0.20
10.000 MHz to 245.000 MHz
LVPECL
LVDS
10.000 MHz to 1450.000 MHz
10.000 MHz to 1450.000 MHz
1.60±0.10
Output Levels
LVCMOS
Logic “0” = 10% of Vcc max
Logic “1” = 90% of Vcc min
LVPECL
LVDS
Logic “0” = Vcc – 1.85 Vmin, Vcc – 1.60 V max
Logic “1” = Vcc – 1.03 V min, Vcc -0.60 V max
Logic “0” = 1.10 V typ, 0.90 V min
Logic “1” = 1.40 V typ, 1.60 V max
2.10
.50
.90
2
1
6
3
4
Load
LVCMOS
LVPECL
15pF
Differential
5
LVDS
Differential
50% ±5% (Ref to 50% of waveform)
.72
.68
.50
Duty Cycle
Rise / Fall Time
LVCMOS
LVPECL
LVDS
.50
1.5 nSec typ, 3.0 nSec max (10% to 90% of waveform)
0.2 nSec typ, 0.5 nSec max (20% to 80% of waveform)
0.2 nSec typ, 0.4 nSec max (20% to 80% of waveform)
2.56
Frequency Stability
Initial Calibration Tolerance
vs. Temperature
vs. Aging
vs. Voltage
vs. Load
±1.0 ppm max at +25ºC ±2ºC at time of shipment
See Stability in Part Number Guide
±1.0 ppm max per year at +25ºC
±0.2 ppm max for a ±5% change in Supply Voltage (Vcc)
±0.2 ppm max for a ±10% change in load
±1.0 ppm max after 1 reflow and measured 24 hours after.
5 mSec max
+2.50 VDC , +3.30 VDC See Part Number Guide
See table 1 sheet 2
18 mA typ
1.60
1.10
.75
Suggested
Land Pattern
vs. Reflow
Start-up Time
Supply Voltage (±5%)
Current
Current with Output
Disabled
Pin Connections
Voltage Control
N/C or Ground
N/C or Enable / Disable
TCVCXO
TCXO
Pin 1
Pin 2
Pin 3
Pin 4
Ground
Output
Phase Noise (RMS)
1.5 pSec typ (12.000 kHz to 20.000 MHz)
Less than 400nSec (1.875 kHz to 21.000 MHz)
N/C
LVCMOS
LVPECL
LVDS
Pin 5
Pin 6
Temperature Range
Operating
Storage
Complementary Output
See Operating Temperature in Part Number Guide
-55ºC to +150ºC
Supply Voltage (Vcc)
Notes:
Dimensions in mm
A 0.01 µF and 10 µF bypass capacitors are recommended between Vcc (Pin 6) and GND (Pin 3)
to minimize power supply noise.
Part Number Guide
Sample Part Number: I593-63Q8H-20.000
Stability
(in ppm)
Enable / Disable
Frequency
(Pin 2)
Package
Input Voltage
Operating Temperature
Output
3 = +3.3 V
6 = +2.5 V
1 = 0ºC to +70ºC
2 = -40ºC to 85ºC
3 = -20ºC to +70ºC
5 = -30ºC to +85ºC
0 = ±1.5*
3 = LVCMOS
8 = LVDS
H = Enable
O = N/C
P = ±2.0*
Q = ±2.5*
R = ±3.0
J = ±5.0
I593 = TCXO
I793 = VCXO
9 = LVPECL
20.000 MHz
* Not available for all temperature ranges
.
Rev: 03/28/16_D
Page 1 of 3
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
3.2 mm x 2.5 mm 6 Pads SMD TCXO or TC/VCXO Oscillator
I593 / I793 Series
Pin Select Funtions
Voltage Control Function (Pin 1) I793 only
E/D Function (Pin 2)
+1.5 V ±1.0 V for both Vcc = +2.5
V & +3.3 V
0.7% of Vcc min or no connection enable output
0.3% of Vcc max to disable output (high impedance)
VC Voltage Center & Range
E/D Control
Frequency Pull Range
Linearity
±8.0 ppm
±1% typ, ±10% max
Positive
E/D Time
Disable Time
200 nSec max
50 nSec max
Transfer Function
Absolute Voltage
Vcc = +3.3 VDC
Vcc = +2.5 VDC
Input Impedance
Harmonics
+3.63 VDC max
+2.63 VDC max
770 kΩ typ
-5.0 dBc max
SSB Phase Noise
Offset
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz
125.00
212.50
312.50
-51 dBc/Hz
-83 dBc/Hz
-111 dBc/Hz
-123 dBc/Hz
-125 dBc/Hz
-135 dBc/Hz
-155 dBc/Hz
-42 dBc/Hz
-87 dBc/Hz
-105 dBc/Hz
-115 dBc/Hz
-118 dBc/Hz
-130 dBc/Hz
-151 dBc/Hz
-49 dBc/Hz
-88 dBc/Hz
-107 dBc/Hz
-111 dBc/Hz
-114 dBc/Hz
-124 dBc/Hz
-147 dBc/Hz
Supply Current
Current Consumption
LVCMOS
LVPECL
LVDS
156 MHZ = 36mA
600 MHz = 40mA
800 MHz = 46mA
1.0G Hz = 50mA
156 MHZ = 40mA
600 MHz = 45mA
800 MHz = 48mA
1.0G Hz = 52mA
156 MHZ = 22mA
600 MHz = 28mA
800 MHz = 30mA
1.0G Hz = 34mA
156 MHZ = 25mA
600 MHz = 30mA
800 MHz = 32mA
1.0G Hz = 36mA
Vcc = +2.50 VDC
All values are typical an over
the operating temperature.
50 MHz = 24mA
125 MHz = 28 mA
200 MHz = 30 mA
Vcc = +3.30 VDC
All values are typical an over
the operating temperature.
50 MHz = 26mA
125 MHz = 30 mA
200 MHz = 34 mA
Table 1
Tape and Reel Information:
Quantity per
3000
Reel
A
B
8.0 ±0.2
4.0 ±0.1
3.5 ±0.05
9.0 ±0.3
60 / 80
C
D
E
F
180 / 250
Rev: 03/28/16_D
Page 2 of 3
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
3.2 mm x 2.5 mm 6 Pads SMD TCXO or TC/VCXO Oscillator
I593 / I793 Series
Typical Applications:
LVCMOS
LVPECL
LVDS
Vcc
Vcc
R1
R3
OUTPUT
Vcc
N/C
Vcc
Zo = 50?
Zo = 50?
OUTPUT
OUTPUT
Vcc
Zo = 50?
Zo = 50?
OUTPUT
15 pF
R1
OUTPUT
0.01
uF
0.01
uF
10 uF
10 uF
0.01
uF
6
5
4
3
10 uF
6
5
4
3
6
5
4
3
Oscillator
2
Oscillator
2
Oscillator
2
R2
R4
1
1
I593 N/C or Ground
Voltage Control
I593 N/C or Ground
Voltage Control
I793
1
I593 N/C or Ground
Voltage Control
I793
I793
Enable / Disable or
N/C
Enable / Disable or
N/C
Enable / Disable or
N/C
R1 and R3 = 127? , R2 and R4 = 825?
R1 and R3 = 250? , R2 and R4 = 625?
Vcc = +3.3 V
Vcc = +2.5 V
Environmental Specifications:
Thermal Shock
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
Fine Leak
Solvent Resistance
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
Package Information:
MSL = N.A. (package does not contain plastic; storage life is unlimited under normal room conditions.)
Termination = e4 (Au over Ni over W base metallization)
Pb Free Solder Reflow Profile:
Marking:
Line 1: I - Date Code (yww)
Line 2: Frequency
Units are backward compatible with 240ºC reflow process.
PROPRIETARY AND CONFIDENTIAL
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY
PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America.
Rev: 03/28/16_D
Page 3 of 3
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice
相关型号:
©2020 ICPDF网 联系我们和版权申明