AFV461 [INFINEON]
ADVANCED ANALOG EMI FILTER; 先进的模拟EMI滤波器
| 型号： | AFV461 |
| 厂家： | 
Infineon |
| 描述： | ADVANCED ANALOG EMI FILTER |
| 文件： | 总4页 (文件大小：36K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PD - 94586A
AFV461 SERIES
ADVANCED ANALOG
EMI FILTER
Description
The AFV461 EMI filter will reduce the input line re-
flected ripple current of all DC/DC converter families to
levels below the CEO3 limits of MIL- STD-461. This
filter is intended for applications requiring compatibil-
ity to MIL-STD-704A.
AFV
Features
n 4.0 amp Input Current - max.
n 40 dB Noise Reduction min. @100 KHz
n -55°C to +125°C Operation
n Military Screening
n Compatible with all stanard 28 Volts Input
DC/DC Converters
These EMI filters are manufactured in a facility certified
to MIL-PRF-38534 and are available with military
screening. Four grades are offered with different screen-
ing options. Refer to Part Number section.
n No Derating for -55°C to +125°C Operation
n No Tantalum Capacitors for High Reliability
Typical Application
+Vout
Case
+Vin
+Vin
+Vout
AHV28XX
(or Other)
DC/DC Converter
AFV461
EMI Filter
System
Bus
RL
Case
Output Return
Input Return
Output Return
Input Return
+Vout
+Vin
AHV28XX
(or Other)
DC/DC Converter
Case
RL
Input Return
Output Return
To other converters up
to rated output current
www.irf.com
1
11/21/02
AFV461 Series
Specifications
Parameter
Input Voltage
Condition
Steady State
Min
0
Typ
28
Max
40
80
Unit
VDC
Input Current
DC
Ripple
4.0
1.0
Amps
Amps RMS
Output Voltage 1
Output Current
VOUT = VIN - IIN (RDC)
Steady State
VDC
Steady State
4.0
0.15
1.6
Amps
Ohms
Watts
dB
Steady State
0.07
40
0.10
DC Resistance (RDC
)
Power Dissipation
Max. DC Current
100 KHz to 50 MHz
Any pin to case
Any pin to case 500VDC
Case
Noise Reduction
Capacitance
Isolation
4200
pF
100
M
Ω
Operating Temperature
Storage Temperature
-55
-65
+125
+150
°C
°C
Weight
39
grams
1. Typical Applications result in Vout within 2 % of Vin
Available Screening Levels and ProcessVariations for AFV461 Series
MIL-STD-883
Method
No
ES
HB
CH
Suffix
Requirement
Suffix
Suffix
Suffix
Temperature Range
Element Evaluation
Internal Visual
-20 to +85°C
-55°C to +125°C
-55°C to +125°C -55°C to +125°C
MIL-PRF-38534
2017
1010
¬
Yes
Cond B
500g
Yes
Yes
Temperature Cycle
Constant Acceleration
Burn-in
Cond C
Cond A
Cond C
Cond A
2001
1015
48hrs @ 85 C
@ 125°C
48hrs
160hrs @ 125°C 160hrs @ 125°C
°
Final Electrical
(Group A)
MIL-PRF-38534
25°C
25°C
-55, +25, +125°C
-55, +25,
+125°C
Seal, Fine & Gross
External Visual
1014
2009
Cond A, C
Yes
Cond A, C
Yes
Cond A, C
Yes
¬
¬
* Per Commercial Standards
2
www.irf.com
AFV461 Series
AFV461 Block Diagram
10µH
5µH
1
2
1800
pFd
0.2
Ω
0.2Ω
3
11µF
11µF
1800
pFd
5
4
Refer to last page for Pin Designation
Device Synchronization
Whenever multiple DC/DC converters are utilized in
a single system, significant low frequency noise may
be generated due to slight difference in the switch-
ing frequencies of the converters (beat frequency
noise). Because of the low frequency nature of this
noise (typically less than 10KHz), it is difficult to filter
out and may interfere with proper operation of sen-
sitive systems (communications, radar or telemetry).
Advanced Analog offers an option, which provides
synchronization of multiple AHE/ATW type convert-
ers, thus eliminating this type of noise. To take ad-
vantage of this capability, the system designer must
assign one of the converters as the master. Then, by
definition, the remaining converters become slaves
and will operate at the masters’ switching frequency.
The user should be aware that the synchronization
system is fail-safe; that is, the slaves will be continue
operating should the master frequency be inter-
rupted for any reason. The layout must be such that
the synchronization output of the master device is
connected to the synchronization input of each slave
device. It is advisable to keep this run short to mini-
mize the possibility of radiating the 250KHz switch-
ing frequency. A typical connection is illustrated on
the cover sheet of this document.
The appropriate converters must be ordered to take
advantage of this feature. After selecting the con-
verters required for the system, a ‘MSTR’ suffix is
added for the master converter part number and an
‘SLV’ suffix is added for slave part number. See Part
Number section of the applicable converter data
sheets.
www.irf.com
3
AFV461 Series
AFV461 Case Outlines
Non-Flanged
Flanged
0.050
(1.27)
0.800
(20.32)
0.040
D
(1.02)
X
0.800
(20.32)
0.26
L
(6.60) Pins
0.040
0.26
D (1.02) X
(6.60) Pins
L
2
3
4
5
2
3
4
2.120
M ax
(53.85)
1.600
(40.64)
2.870
(72.90)
M ax
2.110
(53.59)
M ax
2.550
(64.77)
1.600
(40.64)
1
5
1
0.380
1.120 Max
M ax
Ø
0.162
(4.12)
Holes
(28.45)
(9.65)
0.380
(9.65)
M ax
1.110
(28.19)
2
Part Numbering
AFV 461 F / CH
Pin Designation
Pin No.
Designation
Model
Screening
1
2
3
4
5
+ Vin
—
, ES, H B, C H
Applicable
Military Test
Standard
+ Vout
Case Style
O m it for Standard
Case
Output Return
Input Return
Available Standard Miliatary Drawing (SMD) Cross Reference
Standard
Military Drawing
PIN
Vendor
CAGE
Code
Vendor
Similar
PIN
91020-02HXA
91020-02HZA
52467
52467
AFV461/CH
AFV461F/CH
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331
ADVANCED ANALOG: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 11/02
4
www.irf.com
相关型号：
AFVX21-2X03-H
Board Connector, 6 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Plug
AUK
AFVX21-2X04-H
Board Connector, 8 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Plug
AUK
AFVX21-2X05-H
Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Plug
AUK
©2020 ICPDF网 联系我们和版权申明