AMR2805SPBF [INFINEON]

DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, MODULE-9/10;
AMR2805SPBF
型号: AMR2805SPBF
厂家: Infineon    Infineon
描述:

DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, MODULE-9/10

文件: 总2页 (文件大小:22K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
λ
LAMBDA ADVANCED ANALOG INC.  
ADVANCE PRODUCT DESCRIPTION  
AMR2800 Series  
Radiation Tolerant  
DC/DC Converters  
DESCRIPTION  
FEATURES  
The AMR2800 series of DC/DC converter modules  
has been specifically designed for operation in  
moderate radiation environments supplementing the  
higher radiation performance available in the  
Lambda Advanced Analog ART2815T converter  
series. Environments presented to space vehicles  
operating in low earth orbits, launch boosters,  
orbiting space stations and similar applications  
requiring a low power, high performance converter  
with moderate radiation hardness performance will  
be optimally served by the AMR2800 series.  
!
30 Watts Output Power  
!
!
!
!
!
!
!
!
!
!
!
!
!
Available with 5, 12 and 15 Volt Outputs  
Single, Dual and Triple Output Versions  
Nominal 28 Volt Input  
Total Ionizing Dose > 30KRad (Si)  
No SEE to LET > 60 MeV-cm2/mg  
-55°C to +125°C Operating Range  
Full Load Fault Protection  
The physical configuration of the AMR2800 series  
permits mounting directly to a heat conduction  
surface without the necessity of signal leads  
penetrating the heat sink surface. This package  
configuration permits greater independence in  
mounting and more mechanical security than  
traditional packages. Lambda Advanced Analog’s  
rugged ceramic seal pins are used exclusively in the  
package thereby assuring long term hermeticity.  
Flexible Mounting  
High Power Density  
All Elements Conservatively Derated  
Fully Isolated - Input to Output and to Case  
Complementary EMI Filter Available  
Performance Similar to ATR28XXX Series  
The AMR2800 has been designed for high density  
using chip and wire hybrid technology that complies  
with the intent of MIL-PRF-38534. Finished product  
will be fabricated in a facility fully qualified to MIL-  
PRF-38534. The standard processing adopted for  
the AMR2800 series is similar to the requirements  
of MIL-PRF-38534 for class H, and includes  
Part Numbering  
AMR 28 05 S  
element evaluation.  
qualification test  
Applicable generic lot  
data including radiation  
Outputs  
Model  
S = Single  
D = Dual  
T = Triple  
performance can be made available on request.  
Variations to the standard screening can be  
accommodated. Consult Lambda Advanced Analog  
for special requirements.  
Input Voltage  
Output Voltage  
5 = 5V, 12 = 12V  
15 = 15V  
28 = 28V  
At the time of printing, the devices described in this Advanced Product Description data sheet are in the development stage; therefore all  
features and specifications are preliminary and subject to change before release in their final form.  
AMR2800S  
Absolute Maximum Ratings (Exceeding these limits may cause damage to the device)  
Input Voltage:  
Power Output:  
Soldering:  
-0.5V to +50VDC (50 mSec)  
Internally Limited to 36 W typical  
300°C, 10 Sec  
Temperature Range:  
Operating – -55°C to +125°C  
Storage – -65°C to +135°C  
Typical Performance Characteristics  
Conditions unless otherwise specified  
Parameter  
Limits  
-55°C TC+125°C, VIN+28Vdc, CL=0  
OUTPUT  
Voltage Accuracy  
Power  
± 1%  
30 W  
60 mVPP  
I
V
OUT = IMAX, TC = +25°C  
MIN VIN VMAX  
IOUT = IMAX  
Ripple voltage  
REGULATION  
INPUT  
Line  
Load  
±0.5%  
±1%  
V
MIN VIN VMAX  
I
MIN IOUT IMAX  
Voltage Range  
Ripple Current  
16 V to 40 Vdc  
100 mAPP  
V
MIN VIN VMAX, IOUT = IMAX  
Synchronization input open  
OUT = IMAX, TC = +25°C  
SWITCHING FREQUENCY  
EFFICIENCY  
550 KHz  
80%  
I
LOAD FAULT POWER  
DISSIPATION  
Short Circuit  
Overload  
9 W  
14 W  
LOAD TRANSIENT  
LINE TRANSIENT  
TURN ON DELAY  
Response  
Recovery  
50% Load to/from 100% load  
IOUT = IMAX, VIN = 16 V to/from 40 V  
IOUT = IMIN or IMAX  
±5% VOUT  
500 µSec  
Response  
Recovery  
±7% VOUT  
400 µSec  
14 mSec  
Mechanical Outline  
Ø 0.162  
x 2  
0.220  
0.050  
0.040 D Pins  
2.870  
1.600 2.550  
2.11  
1.200  
0.800  
0.400  
1.200  
0.25 Typ  
0.400  
2270 Martin Avenue Santa Clara CA 95050  
Ph (408) 988-4930 FAX (408) 988-2702  
λ
LAMBDA ADVANCED ANALOG INC.  
0007  

相关型号:

AMR2805T

DC-DC Regulated Power Supply Module, 3 Output, 30W, Hybrid,
INFINEON

AMR2805T/CH

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC/DC CONVERTER
INFINEON

AMR2805T/EM

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC/DC CONVERTER
INFINEON

AMR2805TCH

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC-DC CONVERTER
INFINEON

AMR2805TEM

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC-DC CONVERTER
INFINEON

AMR2812D

DC-DC Regulated Power Supply Module, 2 Output, 30W, Hybrid, PACKAGE-10
INFINEON

AMR2812D/CH

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC/DC CONVERTER
INFINEON

AMR2812D/EM

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC/DC CONVERTER
INFINEON

AMR2812D/EMPBF

DC-DC Regulated Power Supply Module, 2 Output, 30W, Hybrid, HERMETIC SEALED, CERAMIC PACKAGE-10
INFINEON

AMR2812DCH

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC-DC CONVERTER
INFINEON

AMR2812DEM

HYBRID - HIGH RELIABILITY RADIATION TOLERANT DC-DC CONVERTER
INFINEON

AMR2812S

Hi-Rel DC-DC Rad-Tolerant Single Converter in a AMR package
ETC