AUIPS1011_15 [INFINEON]
INTELLIGENT POWER LOW SIDE SWITCH;![AUIPS1011_15](http://pdffile.icpdf.com/pdf2/p00342/img/icpdf/AUIPS1011_2109380_icpdf.jpg)
型号: | AUIPS1011_15 |
厂家: | ![]() |
描述: | INTELLIGENT POWER LOW SIDE SWITCH |
文件: | 总16页 (文件大小:776K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
June, 21st 2012
Automotive grade
AUIPS1011(S)(R)
INTELLIGENT POWER LOW SIDE SWITCH
Product Summary
Features
Over temperature shutdown
Over current shutdown
Active clamp
Low current & logic level input
ESD protection
Optimized Turn On/Off for EMI
Diagnostic on the input current
Rds(on)
Vclamp
13m (max.)
39V
Ishutdown
85A (typ.)
Description
Packages
The AUIPS1011(S)(R) is a three terminal Intelligent Power
Switch (IPS) that features a low side MOSFET with over-
current, over-temperature, ESD protection and drain to
source active clamp. This device offers protections and
the high reliability required in harsh environments. The
switch provides efficient protection by turning OFF the
power MOSFET when the temperature exceeds 165°C or
when the drain current reaches 85A. The device restarts
once the input is cycled. A serial resistance connected to
the input provides the diagnostic. The avalanche capability
is significantly enhanced by the active clamp and covers
most inductive load demagnetizations.
TO-220
AUIPS1011
D²Pak
AUIPS1011S
D-Pak
AUIPS1011R
Typical Connection
+Bat
Load
D
2
3
1
Control
Input R
IN
Input Signal
S
V Diag
1
www.irf.com
AUIPS1011(S)(R)
†
Qualification Information
Automotive
(per AEC-Q100)
Qualification Level
Comments: This family of ICs has passed an Automotive qualification. IR’s Industrial and
Consumer qualification level is granted by extension of the higher Automotive level.
MSL1, 260°C
DPAK-3L
(per IPC/JEDEC J-STD-020)
MSL1, 260°C
D2PAK-3L
Moisture Sensitivity Level
(per IPC/JEDEC J-STD-020)
TO220-5L
Not applicable
Class M4 (+/-450V)
(per AEC-Q100-003)
Class H2 (+/-2500V)
Machine Model
ESD
Human Body Model
(
)
per AEC-Q100-002
Class C4 (+/-1000V)
(per AEC-Q100-011)
Class II, Level A
(per AEC-Q100-004)
Yes
Charged Device Model
IC Latch-Up Test
RoHS Compliant
†
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
2
www.irf.com
AUIPS1011(S)(R)
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. (Tj= -40°C..150°C,
Vcc=6..36V unless otherwise specified).
Symbol
Vds
Vds cont.
Vin
Parameter
Maximum drain to source voltage
Min. Max. Units
-0.3
-
-0.3
36
28
6
V
V
V
A
Maximum continuous drain to source voltage
Maximum input voltage
Max diode continuous current (limited by thermal dissipation)
Maximum power dissipation (internally limited by thermal protection)
Rth=5°C/W AUIPS1011
Rth=40°C/W AUIPS1011S 1” sqr. footprint
Rth=50°C/W AUIPS1011R 1” sqr. footprint
Maximum operating junction temperature
Maximum storage temperature
Isd cont.
5
-40
-55
25
3.1
2.5
150
150
Pd
W
Tj max.
°C
Thermal Characteristics
Symbol
Rth1
Parameter
Typ. Max. Units
Thermal resistance junction to ambient AUIPS1011 TO-220 free air
Thermal resistance junction to case AUIPS1011 TO-220
Thermal resistance junction to ambient AUIPS1011S D²Pak std. footprint
Thermal resistance junction to ambient AUIPS1011S D²Pak 1” sqr. footprint
Thermal resistance junction to case AUIPS1011S D²Pak
Thermal resistance junction to ambient AUIPS1011R D-Pak std. footprint
50
1.2
60
40
1.2
70
Rth2
Rth1
Rth2
Rth3
°C/W
Rth1
Rth2
Rth3
Thermal resistance junction to ambient AUIPS1011R D-Pak 1” sqr. footprint 50
Thermal resistance junction to case AUIPS1011R D-Pak 1.2
Recommended Operating Conditions
These values are given for a quick design. For operation outside these conditions, please consult the application notes.
Symbol
VIH
Parameter
High level input voltage
Min. Max. Units
4.5
5.5
VIL
Low level input voltage
0
0.5
Ids
Continuous drain current, Tambient=85°C, Tj=125°C, Vin=5V
Rth=5°C/W AUIPS1011
A
18
6.5
6
Rth=40°C/W AUIPS1011S 1” sqr. Footprint
Rth=50°C/W AUIPS1011R 1” sqr. Footprint
Recommended resistor in series with IN pin to generate a diagnostic
Max recommended load inductance (including line inductance) (1)
Max frequency (switching losses = conduction losses)
Max Input rising time
Rin
0.5
10
5
200
1
k
µH
Hz
µs
Max L
Max F
Max t rise
(1) Higher inductance is possible if maximum load current is limited - see figure 11
3
www.irf.com
AUIPS1011(S)(R)
Static Electrical Characteristics
Tj= -40..150°C, Vcc=6..28V (unless otherwise specified), typical value are given for Tj=25°C
Symbol
Rds(on)
Parameter
Min. Typ. Max. Units Test Conditions
ON state resistance Tj=25°C
ON state resistance Tj=150°C (2)
Drain to source leakage current
Drain to source leakage current
Drain to source clamp voltage 1
Drain to source clamp voltage 2
IN to source pin clamp voltage
Input threshold voltage
10
19
0.1
0.2
39
13
25
2
4
Vin=5V, Ids=30A
m
Idss1
Idss2
V clamp1
V clamp2
Vin clamp
Vth
Vcc=14V, Tj=25°C
Vcc=28V, Tj=25°C
Id=20mA
µA
36
5.5
39
6.5
1.7
42
7.5
Id=5A
Iin=1mA
Id=10mA
V
Switching Electrical Characteristics
Vcc=14V, Resistive load=0.5, Rinput=50, Vin=5V, Tj=25°C
Symbol
Tdon
Tr
Tdoff
Tf
Parameter
Min. Typ. Max. Units Test Conditions
Turn-on delay time to 20%
Rise time 20% to 80%
Turn-off delay time to 80%
Fall time 80% to 20%
Turn on and off energy
15
20
100
30
50
50
330
70
5
150
100
700
150
µs
See figure 2
Eon + Eoff
mJ
Protection Characteristics
Tj= -40..150°C, Vcc=6..28V (unless otherwise specified), typical value are given for Tj=25°C
Symbol
Tsd
Isd
Parameter
Over temperature threshold
Over current threshold
Over voltage protection (not active when
the device is ON )
Min. Typ. Max.
Units
°C
Test Conditions
See figure 1
See figure 1
120
150(2) 165
44
34
85
37
A
V
OV
15(2)
200
Vreset
Treset
IN protection reset threshold
Time to reset protection
1.7
50
V
µs
Vin=0V
Diagnostic
Tj= -40..150°C, Vcc=6..28V (unless otherwise specified), typical value are given for Tj=25°C
Symbol
Iin, on
Iin, off
Parameter
Min. Typ. Max. Units Test Conditions
ON state IN positive current
OFF state IN positive current
(after protection latched )
15
32
70
Vin=5V
Vin=5V
µA
150
230
350
(2) Guaranteed by design
4
www.irf.com
AUIPS1011(S)(R)
Lead Assignments
Functional Block Diagram
All values are typical
DRAIN
37V
43V
75
15k
IN
Vds > O.V.
S
R
Q
6.5V
Tj > 165°C
I > Isd
SOURCE
5
www.irf.com
AUIPS1011(S)(R)
All curves are typical values. Operating in the shaded area is not recommended.
Vin
80%
Ids
t<T reset
t>T reset
Ishutdown
Vin
Ids
Isd
20%
80%
Tr-in
Tj
Tsd
165°C
20%
Tshutdown
Td on
Td off
Tr
Tf
Vdiag
Vds
normal
fault
Figure 1 – Timing diagram
Figure 2 – IN rise time & switching definitions
T clamp
Vin
Ids
L
Rem : During active clamp,
Vload is negative
V load
R
+
14V
-
D
Vds clamp
IN
Vds
5V
S
Vin
Vds
Ids
0V
Vcc
See Application Notes to evaluate power dissipation
Figure 3 – Active clamp waveforms
Figure 4 – Active clamp test circuit
6
www.irf.com
AUIPS1011(S)(R)
200%
150%
100%
50%
200%
150%
100%
50%
0%
0
1
2
3
4
5
6
-50
0
50
100
150
Vin, input voltage (V)
Tj, junction temperature (°C)
Figure 5 – Normalized Rds(on) (%) Vs Input
Figure 6 - Normalized Rds(on) (%) Vs Tj (°C)
voltage (V)
90
80
70
60
50
40
30
140%
120%
100%
80%
60%
40%
20%
0%
20
I limit
10
I shutdown
0
0
1
2
3
4
5
6
-50
0
50
100
150
Vin, input voltage (V)
Tj, junction temperature (°C)
Figure 7 – Current limitation and current
Figure 8 – Normalized I shutdown (%) Vs
shutdown Vs Input voltage (V)
junction temperature (°C)
7
www.irf.com
AUIPS1011(S)(R)
40
35
30
25
20
15
10
5
100
90
80
70
60
50
40
30
20
10
0
5°C/W
10°C/W
50°C/W 25°C ambient
50°C/W 85°C ambient
50°C/W -40°C ambient
1" sq footprint
std footprint
0
-50
0
50
100
150
0.1
1
10
100
Tamb, Ambient temperature (°C)
Protection response time (s)
Figure 9 – Max. continuous output current (A)
Figure 10 – Ids (A) Vs over temperature
Vs Ambient temperature (°C)
protection response time (s)
100
10
1
100
10
1
0.1
0.01
0.001
0.01
0.1
1
1E-05 1E-04 0.001 0.01 0.1
Time (s)
1
10
100
Inductive load (mH)
Figure 11 – Max. ouput current (A)
Figure 12 – Transient thermal impedance (°C/W)
Vs Inductive load (mH)
Vs time (s)
8
www.irf.com
AUIPS1011(S)(R)
200
180
160
140
120
100
80
250
200
150
100
50
I on
I latch
60
40
20
0
0
-50
0
50
100
150
0
1
2
3
4
5
6
Tj, junction temperature (°C)
Vin, input voltage (V)
Figure 13 – Input current (µA) On and Off
Figure 14 – Over temperature shutdown (°C)
Vs junction temperature (°C)
Vs input voltage (V)
9
www.irf.com
AUIPS1011(S)(R)
Case Outline – TO-220 AB – Automotive Q100 PbF qualified
10
www.irf.com
AUIPS1011(S)(R)
Case Outline - D²Pak (SMD-220) - Automotive Q100 PbF MSL1 qualified
11
www.irf.com
AUIPS1011(S)(R)
Tape & Reel - D²Pak (SMD220)
12
www.irf.com
AUIPS1011(S)(R)
Case Outline – D-Pak - Automotive Q100 PbF MSL1 qualified
13
www.irf.com
AUIPS1011(S)(R)
Tape & Reel - D-Pak
14
www.irf.com
AUIPS1011(S)(R)
Part Marking Information
Ordering Information
Standard Pack
Form
Base Part Number
Package Type
Complete Part Number
Quantity
TO220 –
5Leads
Tube
Tube
50
AUIPS1011
50
800
800
75
AUIPS1011S
AUIPS1011STRL
AUIPS1011STRR
AUIPS1011R
D2-Pak-5-
Leads
Tape and reel left
Tape and reel right
Tube
AUIPS1011
Tape and reel
2000
3000
3000
AUIPS1011RTR
AUIPS1011RTRL
AUIPS1011RTRR
D-Pak-5-Lead
Tape and reel left
Tape and reel right
15
www.irf.com
AUIPS1011(S)(R)
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR)
reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and
services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU”
prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and
process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order
acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with
IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to
support this warranty. Except where mandated by government requirements, testing of all parameters of each product is
not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their
products and applications using IR components. To minimize the risks with customer products and applications,
customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and
is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with
alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation.
Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or
service voids all express and any implied warranties for the associated IR product or service and is an unfair and
deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into
the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the
IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products
for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of
the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are
designed and manufactured to meet DLA military specifications required by certain military, aerospace or other
applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in
applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for
compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR
products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the
designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive
applications, IR will not be responsible for any failure to meet such requirements
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
16
www.irf.com
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00216/img/page/AUIPS1_1223931_files/AUIPS1_1223931_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00216/img/page/AUIPS1_1223931_files/AUIPS1_1223931_2.jpg)
AUIPS1021STRL
Buffer/Inverter Based Peripheral Driver, 1 Driver, MOS, PSSO3, ROHS COMPLIANT, PLASTIC, D2PAK-3
INFINEON
![](http://pdffile.icpdf.com/pdf2/p00216/img/page/AUIPS1_1223931_files/AUIPS1_1223931_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00216/img/page/AUIPS1_1223931_files/AUIPS1_1223931_2.jpg)
AUIPS1021STRR
Buffer/Inverter Based Peripheral Driver, 1 Driver, MOS, PSSO3, ROHS COMPLIANT, PLASTIC, D2PAK-3
INFINEON
©2020 ICPDF网 联系我们和版权申明