AUIRFR2407TR [INFINEON]
HEXFET® Power MOSFET;
| 型号： | AUIRFR2407TR |
| 厂家： | 
Infineon |
| 描述： | HEXFET® Power MOSFET |
| 文件： | 总12页 (文件大小：296K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PD - 97689A
AUTOMOTIVE GRADE
AUIRFR2407
HEXFET® Power MOSFET
Features
l AdvancedPlanarTechnology
l LowOn-Resistance
D
V(BR)DSS
75V
●
Dynamic dV/dT Rating
RDS(on) typ.
max
ID (Silicon Limited)
21.8m
Ω
l 175°COperatingTemperature
l Fast Switching
l FullyAvalancheRated
l RepetitiveAvalancheAllowed
up to Tjmax
G
26m
Ω
S
42A
l Lead-Free,RoHSCompliant
l AutomotiveQualified*
D
Description
S
Specifically designed for Automotive applications,
this Stripe Planar design of HEXFET® Power
MOSFETs utilizes the latest processing techniques
to achieve low on-resistance per silicon area. This
benefit combined with the fast switching speed and
ruggedized device design that HEXFET power
MOSFETs are well known for, provides the designer
with an extremely efficient and reliable device for use
in Automotive and a wide variety of other applications.
G
D-Pak
AUIRFR2407
G
Gate
D
S
Drain
Source
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in
the specifications is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.
Ambient temperature (TA) is 25°C, unless otherwise specified.
Max.
42
Parameter
Units
Continuous Drain Current, VGS @ 10V
@ T = 25°C
C
I
I
I
D
D
29
Continuous Drain Current, VGS @ 10V
Pulsed Drain Current
A
@ T = 100°C
C
170
DM
110
0.71
± 20
Power Dissipation
@T = 25°C
C
W
W/°C
V
P
D
Linear Derating Factor
Gate-to-Source Voltage
V
GS
EAS
IAR
130
25
Single Pulse Avalanche Energy (Thermally Limited)
Avalanche Current
mJ
A
EAR
dv/dt
11
5.0
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt
Operating Junction and
mJ
V/ns
-55 to + 175
T
T
J
Storage Temperature Range
°C
STG
300
Soldering Temperature, for 10 seconds (1.6mm from case )
Thermal Resistance
Parameter
Typ.
Max.
1.4
Units
RθJC
RθJA
RθJA
Junction-to-Case
–––
–––
–––
Junction-to-Ambient (PCB Mount)
Junction-to-Ambient
50
°C/W
110
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
08/30/11
AUIRFR2407
Static Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Drain-to-Source Breakdown Voltage
Min. Typ. Max. Units
75 ––– –––
Conditions
VGS = 0V, ID = 250μA
V(BR)DSS
V
Δ
Δ
V(BR)DSS/ TJ
Breakdown Voltage Temp. Coefficient ––– 0.078 ––– V/°C Reference to 25°C, ID = 1mA
RDS(on)
VGS(th)
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
–––
2.0
21.8 26.0
VGS = 10V, ID = 25A
Ω
V
m
–––
–––
–––
–––
–––
4.0
–––
20
VDS = VGS, ID = 250μA
gfs
IDSS
Forward Transconductance
27
S
VDS = 25V, ID = 25A
Drain-to-Source Leakage Current
–––
–––
–––
–––
μA VDS = 75V, VGS = 0V
VDS = 60V, VGS = 0V, TJ = 150°C
nA VGS = 20V
250
200
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
––– -200
VGS = -20V
Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter Min. Typ. Max. Units Conditions
Total Gate Charge
Qg
Qgs
Qgd
td(on)
tr
–––
–––
–––
–––
–––
–––
–––
–––
74
13
22
16
90
65
66
4.5
110
19
ID = 25A
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
nC VDS = 60V
34
V
V
GS = 10V
DD = 38V
–––
–––
–––
–––
–––
ID = 25A
ns RG = 6.8Ω
VGS = 10V
td(off)
tf
Turn-Off Delay Time
Fall Time
LD
D
S
Internal Drain Inductance
Between lead,
nH 6mm (0.25in.)
from package
G
LS
Internal Source Inductance
–––
7.5
–––
and center of die contact
Ciss
Input Capacitance
––– 2400 –––
VGS = 0V
Coss
Output Capacitance
–––
–––
340
77
–––
–––
pF VDS = 25V
Crss
Reverse Transfer Capacitance
Output Capacitance
ƒ = 1.0MHz, See Fig. 5
VGS = 0V, VDS = 1.0V, ƒ = 1.0MHz
Coss
––– 15700 –––
Coss
Output Capacitance
Effective Output Capacitance
–––
–––
220
220
–––
–––
V
V
GS = 0V, VDS = 60V, ƒ = 1.0MHz
GS = 0V, VDS = 0V to 60V
Coss eff.
Diode Characteristics
Parameter
Min. Typ. Max. Units
Conditions
D
I
I
Continuous Source Current
–––
–––
MOSFET symbol
42
S
(Body Diode)
Pulsed Source Current
A
showing the
integral reverse
G
–––
–––
170
SM
S
(Body Diode)
p-n junction diode.
V
t
Diode Forward Voltage
–––
–––
–––
–––
100
400
1.3
150
600
V
T = 25°C, I = 25A, V = 0V
SD
J S GS
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
ns T = 25°C, I = 25A
J F
rr
di/dt = 100A/μs
Q
t
nC
rr
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
on
Notes:
Repetitive rating; pulse width limited by
max. junction temperature.
ꢀ Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS
.
Starting TJ = 25°C, L = 0.42mH
RG = 25Ω, IAS = 25A.
ISD ≤ 25A, di/dt ≤ 290A/μs, VDD ≤ V(BR)DSS
TJ ≤ 175°C.
Pulse width ≤ 300μs; duty cycle ≤ 2%.
When mounted on 1" square PCB (FR-4 or G-10 Material) .
For recommended footprint and soldering techniques refer to
application note #AN-994.
,
Rθ is measured at TJ of approximately 90°C.
2
www.irf.com
AUIRFR2407
Qualification Information†
Automotive
††
(per AEC-Q101)
Qualification Level
Comments: This part number(s) passed Automotive qualification.
IR’s Industrial and Consumer qualification level is granted by
extension of the higher Automotive level.
Moisture Sensitivity Level
D-Pak
MSL1
Class M4 (+/- 500V) †††
Machine Model
AEC-Q101-002
Class H1C (+/- 2000V) †††
AEC-Q101-001
Human Body Model
ESD
Class C5 (+/- 2000V) †††
AEC-Q101-005
Charged Device
Model
Yes
RoHS Compliant
Qualification standards can be found at International Rectifiers web site: http//www.irf.com/
Exceptions (if any) to AEC-Q101 requirements are noted in the qualification report.
Highest passing voltage.
www.irf.com
3
AUIRFR2407
4
www.irf.com
AUIRFR2407
www.irf.com
5
AUIRFR2407
50
40
30
20
10
0
25
50
75
100
125
150
175
T
, Case Temperature (°C)
C
Fig 9. Maximum Drain Current Vs.
CaseTemperature
6
www.irf.com
AUIRFR2407
www.irf.com
7
AUIRFR2407
8
www.irf.com
AUIRFR2407
D-Pak (TO-252AA) Package Outline
Dimensions are shown in millimeters (inches)
D-Pak Part Marking Information
PartNumber
AUFR2407
DateCode
Y= Year
WW= Work Week
A=Automotive,LeadFree
IRLogo
YWWA
XX or XX
LotCode
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
www.irf.com
9
AUIRFR2407
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRL
TRR
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
10
www.irf.com
AUIRFR2407
Ordering Information
Base part
number
Package Type
Standard Pack
Complete Part Number
Form
Tube
Tape and Reel
Tape and Reel Left
Tape and Reel Right
Quantity
75
2000
3000
3000
AUIRFR2407
Dpak
AUIRFR2407
AUIRFR2407TR
AUIRFR2407TRL
AUIRFR2407TRR
www.irf.com
11
AUIRFR2407
IMPORTANTNOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its
subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and
other changes to its products and services at any time and to discontinue any product or services without
notice. Part numbers designated with the AU prefix follow automotive industry and / or customer specific
requirements with regards to product discontinuance and process change notification. All products are sold
subject to IRs terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with IRs standard warranty. Testing and other quality control techniques are used to the extent
IR deems necessary to support this warranty. Except where mandated by government requirements, testing
of all parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible
for their products and applications using IR components. To minimize the risks with customer products and
applications, customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduc-
tion of this information with alterations is an unfair and deceptive business practice. IR is not responsible
or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for
that product or service voids all express and any implied warranties for the associated IR product or service
and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or in other applications intended to support or sustain life, or in any other application
in which the failure of the IR product could create a situation where personal injury or death may occur. Should
Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall
indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distribu-
tors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of
Defense, are designed and manufactured to meet DLA military specifications required by certain military,
aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by
DLA as military-grade, in applications requiring military grade products, is solely at the Buyers own risk and
that they are solely responsible for compliance with all legal and regulatory requirements in connection with
such use.
IR products are neither designed nor intended for use in automotive applications or environments unless
the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part
number including the designation AU. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IRs Technical Assistance Center
http://www.irf.com/technical-info/
WORLDHEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
12
www.irf.com
相关型号：
AUIRFR2407TRL
Power Field-Effect Transistor, 42A I(D), 75V, 0.026ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
INFINEON
AUIRFR2607ZTRL
Power Field-Effect Transistor, 42A I(D), 75V, 0.022ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, DPAK-3/2
INFINEON
AUIRFR2905ZSTRL
Power Field-Effect Transistor, 42A I(D), 55V, 0.0145ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
INFINEON
AUIRFR2905ZSTRR
Power Field-Effect Transistor, 42A I(D), 55V, 0.0145ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
INFINEON
AUIRFR2905ZTRL
Power Field-Effect Transistor, 42A I(D), 55V, 0.0145ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA, DPAK-3/2
INFINEON
©2020 ICPDF网 联系我们和版权申明