FOA51001B1 [INFINEON]
Semiconductor Solutions for High Speed Communi cation and Fiber OpticApplications; 半导体解决方案的高速通讯过程和光纤OpticApplications
| 型号： | FOA51001B1 |
| 厂家： | 
Infineon |
| 描述： | Semiconductor Solutions for High Speed Communi cation and Fiber OpticApplications |
| 文件： | 总2页 (文件大小：257K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P R O D U C T B R I E F
S e m i co n d u c t o r S o l u t i o n s f o r
H i g h S p e e d Co m m u n i ca t i o n
a n d F i b e r O p t i c A p p l i ca t i o n s
FOA41001B1 16:1
Multiplexer with Clock Multiplication Unit Chip
MUX 9.95 - 10.7 Gbit/s, 3.3 V
FOA51001B1 1:16
Demultiplexer with Clock and Data Recovery Chip
DEMUX 9.95 - 10.7 Gbit/s, 3.3 V
The transceiver chipset (MUX + DEMUX) is compliant with the
Optical Internetworking Forum (OIF)-Physical Layer Group's
OIF99.102 recommendation. These devices offer differential inter-
faces at 622 Mbit/s without external components. The multiplexer
integrates a low noise LC VCO, meets Bellcore's OC-192 jitter
requirements and incorporates pseudo 8-Bit FIFO (First in, First out).
The companion FOA51001B1 10 Gbit/s 1:16 demultiplexer encom-
passes a complete CDR with high data system sensitivity to enhance
the system margin. Each device runs on a single 3.3 V power supply,
with consumption of approximately 1.25 W and incorporates an
integrated low noise Phase Locked Loop (PLL).
Features
■ Loss of lock detection
■ Industry's lowest power
FOA4100/5100
■ Compliant to the Optical
Internetworking Forum
(OIF)-Physical Layer Group's
OIF99.102 recommendation
■ Jitter performance compliant
with ITU-T and Bellcore
■ Internal low phase noise
LC-VCO
■ Tunable center frequency
consumption of typical 2.5 W
for MUX and DEMUX Chipset
(1.2 W for MUX;
from 9.95 GHz to 10.7 GHz
1.3 W for DEMUX)
Typical Applications
■ Real differential LVDS
interface
(100 Ω termination on-chip)
■ MUX only: advanced FIFO
architecture ( 2.4 ns drift
tolerance at 9.95 Gbit/s)
■ Fiber optics telecom and
datacom applications
■ SONET/SDH OC-192/STM-64
with and without FEC
■ Differential input voltage
range: 40 mV - 800 mV
(pk-pk)
Main Advantages
■ Data rate from 9.95 Gbit/s
to 10.7 Gbit/s
■ Single supply voltage 3.3 V
■ Two reference clock options:
155 MHz or 622 MHz
■ MUX only: Two receiver clock
modes, 311 MHz or 622 MHz
■ Adjustment of sampling
threshold and phase
Packing
Type
Sales Code
Package
P-HBGA-92
Bare Die
MUX 16:1
MUX 16:1
DEMUX 1:16
DEMUX 1:16
FOA41001B1
FOA41002B1
FOA51001B1
FOA51002B1
P-HBGA-92
Bare Die
F O A 4 1 0 0 / 5 1 0 0
M U X / D E M U X
9 .9 5 - 1 0 .7 G b i t / s , 3 .3 V
N e v e r s t o p t h i n k i n g .
P R O D U C T B R I E F
FOA41001B1 MUX Block Diagram
FOA51001B1 DEMUX Block Diagram
TTL TTL TTL
Analog
Analog
Analog
Analog
TTL
LVDS2
LVDS2
LVDS2
LVDS2
LVDS2
LVDS2
MUX
S
1
CML2
FIFO
MUX
CML2
DEMUX
0
LVDS2
LVDS2
LVDS2
LVDS2
Analog
Analog
TXCLK_SRC
DATA_RT
DATA
TXCLK
0.622
CLK
9.95
CLK
0.622
PECL2
TTL
FWD
CMU
9.95
ERR
LPCML2
Analog
CDR
LVDS2
TTL
PECL2
REFCLK
LOS
LF1 LF2 ERR
TTL
TTL
TTL
&
TTL
LVDS2
TTL TTL TTL TTL Analog Analog Analog
TTL TTL TTL TTL TTL TTL Analog Analog Analog
10 Gbit/s Chipset Overview
1)
Data
MUX+CMU
Laser Driver
Laser
Processing
FOA41001B1
FOA21002A1
Framer/
Mapper
FOAxxxx
One Chip
Transceiver
FOA6100xB1
1)
DEMUX+CDR
CDR
TIA
PIN
FOA51001B1
FOA31002B1
FOA11002A1
Optional Serial CDR
How to reach us:
Attention please!
Warnings
The information herein is given to describe certain components
and shall not be considered as warranted characteristics.
Due to technical requirements components may contain dan-
gerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
http://www.infineon.com
Published by
Terms of delivery and rights to technical change reserved.
Infineon Technologies AG,
St.-Martin-Strasse 53,
81541 München
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-sup-
port device or system, or to affect the safety or effectiveness
of that device or system. Life support devices or systems are
intended to be implanted in the human body, or to support
and/or maintain and sustain and/or protect human life. If
they fail, it is reasonable to assume that the health of the user
or other persons may be endangered.
© Infineon Technologies AG 2002. All Rights Reserved.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms
and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our
Infineon Technologies Representatives worldwide.
Ordering No. B168-H7715-G1-X-7600
Printed in Germany
Published by Infineon Technologies AG
PS 1201.5
NB
相关型号：
©2020 ICPDF网 联系我们和版权申明