IRL620S

更新时间:2024-09-18 02:21:02
品牌:INFINEON
描述:Power MOSFET(Vdss=200V, Rds(on)=0.80ohm, Id=5.2A)

IRL620S 概述

Power MOSFET(Vdss=200V, Rds(on)=0.80ohm, Id=5.2A) 功率MOSFET ( VDSS = 200V , RDS(ON) = 0.80ohm ,ID = 5.2A )

IRL620S 数据手册

通过下载IRL620S数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Previous Datasheet  
Index  
Next Data Sheet  
PD -9.1218  
IRL620S  
HEXFET® Power MOSFET  
Surface Mount  
Available in Tape & Reel  
Dynamic dv/dt Rating  
Repetitive Avalanche Rated  
Logic-Level Gate Drive  
VDSS = 200V  
RDS(on) = 0.80Ω  
ID = 5.2A  
R
DS(on)  
Specified at V =4V & 5V  
GS  
Fast Switching  
Description  
Third Generation HEXFETs from International Rectifier provide the designer  
with the best combination of fast switching, ruggedized device design, low on-  
resistance and cost-effectiveness.  
The SMD-220 is a surface-mount power package capable of accommodating die  
sizes up to HEX-4. It provides the highest power capability and the lowest possible  
on-resistance in any existing surface-mount package. The SMD-220 is suitable for  
high current applications because of its low internal connection resistance and can  
dissipate up to 2.0W in a typical surface-mount application.  
SMD-220  
Absolute Maximum Ratings  
Parameter  
Max.  
Units  
ID @ TC = 25°C  
ID @ TC = 100°C  
IDM  
Continuous Drain Current, VGS @ 5.0 V  
Continuous Drain Current, VGS @ 5.0 V  
Pulsed Drain Current  
5.2  
A
3.3  
21  
PD @TC = 25°C  
PD @TA = 25°C  
Power Dissipation  
50  
W
Power Dissipation (PCB Mount)**  
Linear Derating Factor  
3.1  
0.40  
W/°C  
Linear Derating Factor (PCB Mount)**  
Gate-to-Source Voltage  
0.025  
VGS  
±10  
V
mJ  
A
EAS  
Single Pulse Avalanche Energy  
Avalanche Current  
125  
IAR  
5.2  
EAR  
Repetitive Avalanche Energy  
Peak Diode Recovery dv/dt  
5.0  
5.0  
mJ  
V/ns  
dv/dt  
TJ, TSTG  
Junction and Storage Temperature Range  
Soldering Temperature, for 10 seconds  
-55 to + 150  
300 (1.6mm from case)  
°C  
Thermal Resistance  
Parameter  
Junction-to-Case  
Min.  
Typ.  
Max. Units  
2.5  
RθJC  
RθJA  
RθJA  
Junction-to-Ambient (PCB Mount)**  
Junction-to-Ambient  
40  
62  
°C/W  
** When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques, refer  
to Application Note AN-994.  
Revision 0  
To Order  
 
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Electrical Characteristics @ T = 25°C (unless otherwise specified)  
J
Parameter  
Min. Typ. Max. Units Conditions  
V(BR)DSS  
Drain-to-Source Breakdown Voltage  
200  
1.0  
1.2  
0.27  
V
VGS = 0V, ID = 250µA  
V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient  
V/°C Reference to 25°C, ID = 1mA  
RDS(on)  
Static Drain-to-Source On-Resistance  
0.80  
1.0  
2.0  
VGS = 10.0V, ID = 3.1A  
VGS = 4.0V, ID = 2.6A  
VGS(th)  
gfs  
Gate Threshold Voltage  
V
S
VDS = VGS, ID = 250µA  
VDS = 50V, ID = 3.1A  
VDS = 200V, VGS = 0V  
VDS = 320V, VGS = 0V, TJ = 125°C  
VGS = 10V  
Forward Transconductance  
Drain-to-Source Leakage Current  
IDSS  
25  
µA  
nA  
250  
100  
-100  
16  
IGSS  
Gate-to-Source Forward Leakage  
Gate-to-Source Reverse Leakage  
Total Gate Charge  
VGS = -10V  
Qg  
ID = 5.2A  
Qgs  
Qgd  
td(on)  
tr  
Gate-to-Source Charge  
Gate-to-Drain ("Miller") Charge  
Turn-On Delay Time  
2.9  
9.6  
nC  
VDS = 160V  
VGS = 5.0V, See Fig. 6 and 13  
VDD = 100V  
4.2  
31  
18  
17  
4.5  
Rise Time  
ID = 5.2A  
ns  
td(off)  
tf  
Turn-Off Delay Time  
RG = 9.0Ω  
Fall Time  
RD = 20Ω, See Fig. 10  
LD  
Internal Drain Inductance  
Between lead,  
6mm (0.25in.)  
from package  
and center of  
nH  
LS  
Internal Source Inductance  
7.5  
die contact  
Ciss  
Coss  
Crss  
Input Capacitance  
360  
91  
VGS = 0V  
Output Capacitance  
pF  
VDS = 25V  
Reverse Transfer Capacitance  
27  
ƒ = 1.0MHz, See Fig. 5  
Source-Drain Ratings and Characteristics  
Parameter  
Min. Typ. Max. Units Conditions  
IS  
Continuous Source Current  
(Body Diode)  
MOSFET symbol  
5.2  
showing the  
A
ISM  
Pulsed Source Current  
(Body Diode)  
integral reverse  
21  
p-n junction diode.  
TJ = 25°C, IS = 5.2A, VGS = 0V  
TJ = 25°C, IF = 5.2A  
VSD  
trr  
Diode Forward Voltage  
Reverse Recovery Time  
Reverse RecoveryCharge  
Forward Turn-On Time  
1.8  
V
180 270  
1.1 1.7  
ns  
Qrr  
ton  
µC di/dt = 100A/µs  
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)  
Notes:  
Repetitive rating; pulse width limited by  
max. junction temperature. ( See fig. 11 )  
I
SD 5.2A, di/dt 95A/µs, VDD V(BR)DSS,  
TJ 150°C  
VDD = 50V, starting TJ = 25°C, L = 6.9mH  
Pulse width 300µs; duty cycle 2%.  
RG = 25, IAS = 5.2A. (See Figure 12)  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Fig 1. Typical Output Characteristics,  
TC = 25oC  
Fig 2. Typical Output Characteristics,  
TC = 150oC  
Fig 3. Typical Transfer Characteristics  
Fig 4. Normalized On-Resistance  
Vs. Temperature  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620s  
Fig 5. Typical Capacitance Vs.  
Fig 6. Typical Gate Charge Vs.  
Drain-to-Source Voltage  
Gate-to-Source Voltage  
Fig 7. Typical Source-Drain Diode  
Fig 8. Maximum Safe Operating Area  
Forward Voltage  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Fig 10a. Switching Time Test Circuit  
Fig 9. Maximum Drain Current Vs.  
Case Temperature  
Fig 10b. Switching Time Waveforms  
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Fig 12a. Unclamped Inductive Test Circuit  
Fig 12c. Maximum Avalanche Energy  
Vs. Drain Current  
Fig 12b. Unclamped Inductive Waveforms  
Fig 13a. Basic Gate Charge Waveform  
Fig 13b. Gate Charge Test Circuit  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Fig 14. Peak Diode Recovery dv/dt Test Circuit  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Package Outline SMD-220  
Part Marking Information SMD-220  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
IRL620S  
Package Outline SMD-220 Tape and Reel  
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331  
EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: (44) 0883 713215  
IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 3L1, Tel: (905) 475 1897 IR GERMANY:  
Saalburgstrasse 157, 61350 Bad Homburg Tel: 6172 37066 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: (39)  
1145 10111 IR FAR EAST: K&H Bldg., 2F, 3-30-4 Nishi-Ikeburo 3-Chome, Toshima-Ki, Tokyo 171 Tel: (03)3983 0641  
IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, 0316 Tel: 65 221 8371  
Data and specifications subject to change without notice.  
To Order  

IRL620S 相关器件

型号 制造商 描述 价格 文档
IRL620S, SiHL620S VISHAY Power MOSFET 获取价格
IRL620SPBF INFINEON HEXFET Power MOSFET 获取价格
IRL620SR FAIRCHILD Power Field-Effect Transistor, 3.3A I(D), 200V, 0.8ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, D2PAK-3 获取价格
IRL620STRL INFINEON Power Field-Effect Transistor, 5.2A I(D), 200V, 0.8ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB, SMD-220, 3 PIN 获取价格
IRL620STRLPBF VISHAY 暂无描述 获取价格
IRL621 SAMSUNG Power Field-Effect Transistor, 4A I(D), 150V, 1.2ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, TO-220, 3 PIN 获取价格
IRL624 SAMSUNG Power Field-Effect Transistor, 3.3A I(D), 250V, 1.3ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB, TO-220, 3 PIN 获取价格
IRL6283MPBF INFINEON Environmentally Friendly Product 获取价格
IRL6283MPBF_15 INFINEON Environmentally Friendly Product 获取价格
IRL6283MTR1PBF INFINEON Power Field-Effect Transistor 获取价格

IRL620S 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    5
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6