IRU1117-33CD [INFINEON]

800mA LOW DROPOUT POSITIVE FIXED 3.3V REGULATOR(75.90 k) ; 800毫安低压差正固定3.3V稳压器( 75.90 K)\n
IRU1117-33CD
型号: IRU1117-33CD
厂家: Infineon    Infineon
描述:

800mA LOW DROPOUT POSITIVE FIXED 3.3V REGULATOR(75.90 k)
800毫安低压差正固定3.3V稳压器( 75.90 K)\n

线性稳压器IC 调节器 电源电路 输出元件
文件: 总4页 (文件大小:78K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Data Sheet No. PD94172  
IRU1117-33  
800mA LOW DROPOUT POSITIVE  
FIXED 3.3V REGULATOR  
FEATURES  
DESCRIPTION  
Guaranteed < 1.2V Dropout at 800mA Load  
Current  
The IRU1117-33 is a low dropout three-terminal fixed out-  
put regulator with minimum of 800mA output current ca-  
pability. This product is specifically designed to provide  
well regulated supply for low voltage IC applications such  
as VGA, sound & DVD cards. The IRU1117-33 is guar-  
anteed to have <1.2V dropout at full load current making  
it ideal to provide well regulated with 4.75V to 7V input  
supply. The IRU1117-33 is specifically designed to be  
stable with low cost aluminum capacitors while main-  
taining stability with low ESR tantalum caps.  
Fast Transient Response  
1% Output Voltage Initial Accuracy  
Built-In Thermal Shutdown  
Available in SOT-223, D-Pak, Ultra Thin-Pak  
and 8-Pin SOIC Surface-Mount Packages  
APPLICATIONS  
VGA & Sound Card Applications  
Standard 3.3V Chip Set and Logic Applications  
TYPICAL APPLICATION  
5V  
C1  
10uF  
Vin  
3
2
1
IRU1117-33  
Vout  
3.3V / 800mA  
C2  
10uF  
Gnd  
Figure 1 - Typical application of IRU1117-33 in a 5V to 3.3V regulator  
PACKAGE ORDER INFORMATION  
Tj (°C)  
2-PIN PLASTIC  
TO-252 (D-Pak)  
IRU1117-33CD  
3-PIN PLASTIC  
2-PIN PLASTIC  
Ultra Thin-Pak (P)  
IRU1117-33CP  
8-PIN PLASTIC  
SOIC (S)  
SOT-223 (Y)  
0 To 150  
IRU1117-33CY  
IRU1117-33CS  
Rev. 1.3  
06/29/01  
1
IRU1117-33  
ABSOLUTE MAXIMUM RATINGS  
Input Voltage (Vin) .................................................... 7V  
Power Dissipation ..................................................... Internally Limited  
Storage Temperature Range ...................................... -65°C To 150°C  
Operating Junction Temperature Range ..................... 0°C To 150°C  
PACKAGE INFORMATION  
2-PIN PLASTIC TO-252 (D-Pak)  
3-PIN PLASTIC SOT-223 (Y)  
2-PIN ULTRA THIN-PAK (P)  
8-PIN PLASTIC SOIC (S)  
FRONT VIEW  
FRONT VIEW  
TOP VIEW  
TOP VIEW  
3
3
Vin  
Vin  
1
2
3
4
8
7
6
5
Vin  
NC  
Vout  
Vout  
Vout  
Vout  
3
Vin  
Tab is  
Vout  
Tab is  
Vout  
Tab is  
2
Vout  
Vout  
NC  
1
Gnd  
Gnd  
1
1
Gnd  
Gnd  
θJA=70°C/W for 0.5" Sq pad  
θJA=90°C/W for 0.4" Sq pad  
θJA=70°C/W for 0.5" Sq pad  
θJA=55°C/W for 1" Sq pad  
ELECTRICAL SPECIFICATIONS  
Unless otherwise specified, these specifications apply over Cin=1µF, Vin=5V, Cout=10µF, and Tj=0 to 125C.  
Typical values refer to Tj=25C.  
PARAMETER  
SYM  
TEST CONDITION  
Io=10mA,Tj=25C  
Io=10mA  
Io=10mA, 4.75V<Vin<7V  
10mA<Io<800mA  
Io=1A  
Io=800mA  
dVo=100mV  
30ms Pulse, Io=800mA  
f=120Hz, Co=25µF Tantalum,  
Io=0.5A  
Io=10mA  
Tj=125C, 1000Hrs  
Tj=25C, 10Hz<f<10KHz  
MIN  
TYP  
MAX  
UNITS  
Output Voltage  
Vo  
3.267 3.300 3.333  
V
3.235 3.300 3.365  
Line Regulation  
Load Regulation (Note 1)  
Dropout Voltage (Note 2)  
7
mV  
mV  
17  
1.3  
1.2  
V
A
%/W  
Current Limit  
Thermal Regulation  
Ripple Rejection  
1.1  
0.01  
0.02  
1
60  
70  
0.5  
0.3  
dB  
%
%
Temperature Stability  
Long Term Stability  
RMS Output Noise  
0.003  
%Vo  
Note 1: Low duty cycle pulse testing with Kelvin connections is required in order to maintain accurate data.  
Note 2: Dropout voltage is defined as the minimum differential voltage between Vin and Vout required to maintain  
regulation at Vout. It is measured when the output voltage drops 1% below its nominal value.  
Rev. 1.3  
2
06/29/01  
IRU1117-33  
PIN DESCRIPTIONS  
PIN# PIN SYMBOL  
PIN DESCRIPTION  
1
2
3
Gnd  
Vout  
Vin  
Ground pin. This pin must be connected to ground plane using a low inductance short  
connection.  
The output of the regulator. This pin is also connected to the tab of the package. An output  
capacitor must be connected to this pin to insure stability of the regulator.  
Input pin of the regulator. Typically a large storage capacitor is connected from this pin to  
ground to insure that the input voltage does not sag below the minimum dropout voltage  
during the load transient response. This pin must always be 1.3V higher than Vout in order  
for the device to regulate properly.  
BLOCK DIAGRAM  
Vin 3  
2 Vout  
+
+
1.25V  
CURRENT  
LIMIT  
THERMAL  
1 Gnd  
SHUTDOWN  
1117-33blk1-1.0  
Figure 2 - Simplified block diagram of the IRU1117-33  
Rev. 1.3  
06/29/01  
3
Notes  
IRU1117-33  
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105  
TAC Fax: (310) 252-7903  
Visit us at www.irf.com for sales contact information.  
Data and specifications subject to change without notice. 02/01  
Rev. 1.3  
06/29/01  
4

相关型号:

IRU1117-33CDPBF

Fixed Positive LDO Regulator, 3.3V, 1.3V Dropout, PSSO2, PLASTIC, TO-252, DPAK-2
INFINEON

IRU1117-33CDTR

Regulator, 1 Output, BIPolar,
INFINEON

IRU1117-33CP

800mA LOW DROPOUT POSITIVE FIXED 3.3V REGULATOR
INFINEON

IRU1117-33CPPBF

Fixed Positive LDO Regulator, 3.3V, 1.3V Dropout, PSSO2, PLASTIC, ULTRA THIN PACKAGE-2
INFINEON

IRU1117-33CPTR

暂无描述
INFINEON

IRU1117-33CS

800mA LOW DROPOUT POSITIVE FIXED 3.3V REGULATOR
INFINEON

IRU1117-33CSPBF

Fixed Positive LDO Regulator, 3.3V, 1.3V Dropout, BIPolar, PDSO8, PLASTIC, SOIC-8
INFINEON

IRU1117-33CSTR

暂无描述
INFINEON

IRU1117-33CSTRP

Regulator, 1 Output, BIPolar, PDSO8,
INFINEON

IRU1117-33CSTRPBF

Regulator, 1 Output, BIPolar, PDSO8,
INFINEON

IRU1117-33CY

800mA LOW DROPOUT POSITIVE FIXED 3.3V REGULATOR
INFINEON

IRU1117-33CYTR

Regulator, 1 Output, BIPolar,
INFINEON