LOM776-Q1R1-24 [INFINEON]
Visible LED, Clear;
| 型号： | LOM776-Q1R1-24 |
| 厂家： | 
Infineon |
| 描述： | Visible LED, Clear |
| 文件： | 总14页 (文件大小：180K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Hyper Mini TOPLED® RG
Hyper-Bright LED
LS M776, LA M776, LO M776, LY M776
Nicht für Neuentwicklungen - wird durch Mini
TOPLED Santana® ersetzt werden
Not for new designs - will be replaced by Mini
TOPLED Santana®
Besondere Merkmale
Features
• Gehäusetyp: weißes SMT-Gehäuse
• Besonderheit des Bauteils: kleine Bauform
für Anwendungen mit wenig Platzbedarf;
Bauteil wird top-down montiert und strahlt
durch das PCB
• package: white SMT package
• feature of the device: small package for
applications where small space is required;
LED is mounted top down and emits through
the PCB
• Wellenlänge: 633 nm (super-rot),
617 nm (amber), 606 nm (orange),
587 nm (gelb)
• Abstrahlwinkel: Lambertscher Strahler (120°)
• Technologie: InGaAlP
• optischer Wirkungsgrad: 11 lm/W (gelb,
orange, amber), 7 lm/W (super-rot)
• Gruppierungsparameter: Lichtstärke,
Wellenlänge
• Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
• Lötmethode: IR Reflow Löten
• Vorbehandlung: nach JEDEC Level 2
• Gurtung: 12 mm Gurt mit 3000/Rolle,
ø180 mm oder 11800/Rolle, ø330 mm
• wavelength: 633 nm(super-red), 617 (amber),
606 nm (orange), 587 nm (yellow)
• viewing angle: Lambertian Emitter (120°)
• technology: InGaAlP
• optical efficiency: 11 lm/W (yellow,
orange, amber), 7 lm/W (super-red)
• grouping parameter: luminous intensity,
wavelength
• assembly methods: suitable for all
SMT assembly methods
• soldering methods: IR reflow soldering
• preconditioning: acc. to JEDEC Level 2
• taping: 12 mm tape with 3000/reel, ø180 mm
or 11800/reel, ø330 mm
Applications
Anwendungen
• optical indicators
• optischer Indikator
• coupling into light guides
• Einkopplung in Lichtleiter
• backlighting (LCD, cellular phones, switches,
keys, displays, illuminated advertising, general
lighting)
• interior automotive lighting. (e.g. dashboard
backlighting, etc.)
• Hinterleuchtung (LCD, Handy, Schalter,
Tasten, Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
• Innenbeleuchtung im Automobilbereich
(z.B. Instrumentenbeleuchtung, u.ä.)
2002-06-14
1
LS M776, LA M776, LO M776, LY M776
Typ
Emissions- Farbe der
Lichtstärke
Lichtstrom Bestellnummer
farbe
Lichtaustritts-
fläche
Type
Color of
Emission
Color of the
LightEmitting Intensity
Luminous
Luminous
Flux
Ordering Code
Area
IF = 20 mA
IV (mcd)
IF = 20 mA
ΦV (mlm)
LS M776-N2P2-1
LS M776-P2R1-1
super-red
amber
colorless clear
colorless clear
colorless clear
colorless clear
35.5... 71.0
56.0...140.0
150 (typ.) Q62703-Q5089
280 (typ.) Q62703-Q5090
LA M776-P2Q2-1
LA M776-Q2S1-1
56.0...112.0
90.0...224.0
240 (typ.) Q62703-Q4980
440 (typ.) Q62703-Q4981
LO M776-Q1R1-24 orange
LO M776-R1S2-24
71.0...140.0
112.0...280.0
310 (typ.) Q62703-Q5044
560 (typ.) Q62703-Q5045
LY M776-P2Q2-26 yellow
LY M776-Q2S1-26
56.0...112.0
90.0...224.0
240 (typ.) Q62703-Q5127
440 (typ.) Q62703-Q5128
Anm.: -1 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 4)
-24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
-26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe,
die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich.
In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten.
Note: -1 Total color tolerance range, delivery in single groups (please see page 4)
-24 Total color tolerance range, delivery in single groups (please see page 5)
-26 Total color tolerance range, delivery in single groups (please see page 5)
The standard shipping format for serial types includes a lower or upper family group of 3 or 4
individual groups. Individual half groups are not available.
No packing unit / tape ever contains more than one luminous intensity half group.
2002-06-14
2
LS M776, LA M776, LO M776, LY M776
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
LS, LO, LA LY
Betriebstemperatur
Operating temperature range
Top
Tstg
Tj
– 40 … + 100
°C
°C
°C
mA
A
Lagertemperatur
Storage temperature range
– 40 … + 100
+ 125
Sperrschichttemperatur
Junction temperature
Durchlassstrom
Forward current
IF
30
Stoßstrom
IFM
0.8
0.2
Surge current
t ≤ 10 µs, D = 0.005
Sperrspannung
Reverse voltage
VR
3
V
Leistungsaufnahme
Power consumption
Ptot
80
mW
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Lötpad
Rth JA
Rth JS
580
330
K/W
K/W
Junction/solder point
Montage auf PC-Board FR 4 (Padgröße ≥ 5 mm2)
mounted on PC board FR 4 (pad size ≥ 5 mm 2)
2002-06-14
3
LS M776, LA M776, LO M776, LY M776
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
LS
LA
LO LY
Wellenlänge des emittierten Lichtes
Wavelength at peak emission
IF = 20 mA
(typ.) λpeak
645 622 610 591 nm
Dominantwellenlänge1)
Dominant wavelength
IF = 20 mA
(typ.) λdom
(typ.) ∆λ
(typ.) 2ϕ
633 617 606 587 nm
± 6 ± 6
16 16
+3/–6 +8/–7
Spektrale Bandbreite bei 50 % Irel max
Spectral bandwidth at 50 % Irel max
IF = 20 mA
16
15
nm
Abstrahlwinkel bei 50 % IV (Vollwinkel)
Viewing angle at 50 % IV
120 120 120 120 Grad
deg.
Durchlassspannung 2)
Forward voltage 2)
IF = 20 mA
(typ.) VF
(max.) VF
2.0 2.0 2.0 2.0
2.4 2.4 2.4 2.4
V
V
Sperrstrom
Reverse current
VR = 3 V
(typ.) IR
(max.) IR
0.01 0.01 0.01 0.01 µA
10 10 10 10 µA
Temperaturkoeffizient von λpeak
Temperature coefficient of λpeak
IF = 20 mA; –10°C ≤ T ≤ 100°C
(typ.) TCλpeak
(typ.) TCλdom
(typ.) TCV
0.14 0.13 0.13 0.13 nm/K
0.01 0.06 0.07 0.10 nm/K
– 2.0 – 1.8 – 1.7 – 2.5 mV/K
Temperaturkoeffizient von λdom
Temperature coefficient of λdom
IF = 20 mA; –10°C ≤ T ≤ 100°C
Temperaturkoeffizient von VF
Temperature coefficient of VF
IF = 20 mA; –10°C ≤ T ≤ 100°C
Optischer Wirkungsgrad
Optical efficiency
IF = 20 mA
(typ.) ηopt
7
11
11
11
lm/W
1)
Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm.
2)
Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt.
Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V.
2002-06-14
4
LS M776, LA M776, LO M776, LY M776
1) Wellenlängengruppen / Wavelength groups
Gruppe
Group
yellow
orange
Einheit
Unit
min. max. min. max.
2
3
4
5
6
580 583 600 603 nm
583 586 603 606 nm
586 589 606 609 nm
589 592
592 595
nm
nm
Helligkeits-Gruppierungsschema
Luminous Intensity Groups
Lichtgruppe
Luminous Intensity Group
Lichtstärke
Luminous Intensity
IV (mcd)
Lichtstrom
Luminous Flux
ΦV (mlm)
N2
P1
P2
Q1
Q2
R1
R2
S1
S2
35.5 … 45.0
45.0 … 56.0
56.0 … 71.0
71.0 … 90.0
90.0 …112.0
112.0 …140.0
140.0 …180.0
180.0 …224.0
224.0 …280.0
120 (typ.)
150 (typ.)
190 (typ.)
240 (typ.)
300 (typ.)
380 (typ.)
480 (typ.)
600 (typ.)
760 (typ.)
Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ± 11%.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: S2-3
Example: S2-3
Lichtgruppe
Luminous Intensity Group
Halbgruppe
Half Group
Wellenlänge
Wavelength
S
2
3
2002-06-14
5
LS M776, LA M776, LO M776, LY M776
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 20 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
OHL00235
100
%
Irel
80
60
40
20
0
V
λ
yellow
orange
amber
super-red
400
450
500
550
600
650
nm
700
λ
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
OHL01660
40˚
30˚
20˚
10˚
0˚
ϕ
1.0
0.8
0.6
0.4
0.2
0
50˚
60˚
70˚
80˚
90˚
100˚
1.0
0.8
0.6
0.4
0˚
20˚
40˚
60˚
80˚
100˚
120˚
2002-06-14
6
LS M776, LA M776, LO M776, LY M776
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Relative Lichtstärke IV/IV(20 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
OHL00233
10 1
OHL00232
102
mA
IV
5
IV (20 mA)
IF
10 0
5
101
5
10 -1
5
super-red
yellow
100
5
orange/amber
10 -2
5
10 -3
10-1
10 -1
5
10 0
5
10 1
mA 10 2
1
1.4
1.8
2.2
2.6
3
V 3.4
IF
VF
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 20 mA
OHL00238
OHL00773
2.0
35
IV
mA
IV (25 ˚C)
IF
30
TS
1.6
orange
yellow
amber
super-red
25
TA
1.2
20
15
10
5
0.8
orange
yellow
0.4
amber
super-red
TA temp. ambient
T
S temp. solder point
0
-20
0
0
20
40 60
80 ˚C 100
0
20
40
60
˚C 100
T
T
A
2002-06-14
7
LS M776, LA M776, LO M776, LY M776
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
LS, LA, LO
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 85 °C
LS, LA, LO
OHL01416
OHL00318
100
100
tP
A
A
IF
IF
tP
T
IF
D
=
5
5
D
=
T
0.005
0.01
0.02
0.05
0.1
D
=
0.005
0.01
0.02
0.05
0.1
0.2
0.5
10-1
5
10-1
5
0.2
0.5
tP
tP
T
IF
D
=
T
10-2
10-2
10-5 10-4 10-3 10-2 10-1 100 101 s 102
10-5 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2002-06-14
8
LS M776, LA M776, LO M776, LY M776
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
LY
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 85 °C
LY
OHL01417
100
OHL00316
100
tP
A
tP
IF
tP
T
A
IF
IF
tP
T
D
=
IF
5
D
=
5
T
T
D
=
D
=
0.005
0.01
0.02
0.05
0.1
0.005
0.01
0.02
0.05
0.1
10-1
5
10-1
5
0.2
0.5
0.2
0.5
10-2
10-2
10-5 10-4 10-3 10-2 10-1 100 101 s 102
10-5 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2002-06-14
9
LS M776, LA M776, LO M776, LY M776
Maßzeichnung
Package Outlines
1.3 (0.051)
1.1 (0.043)
1.0 (0.039)
0.8 (0.031)
0.18 (0.007)
0.12 (0.005)
Light emitting window
typ. 1.5 (0.059) x 1.0 (0.039)
Cathode marking
Cathode
0.8 (0.031) +0.05 (0.002)
1.0 (0.039)
0...0.1 (0.004)
Cathode marking
1.4 (0.055)
GPLY6926
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung:
Cathode mark:
abgeschrägte Ecke
bevelled edge
Gewicht / Approx. weight: 10 mg
2002-06-14
10
LS M776, LA M776, LO M776, LY M776
Lötbedingungen
Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil
(nach IPC 9501)
IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
300
˚C
250
200
150
100
50
T
240-245 ˚C
10-40 s
183 ˚C
120 to 180 s
Ramp-down rate up to 6 K/s
Defined for Preconditioning: up to 6 K/s
Ramp-up rate up to 6 K/s
Defined for Preconditioning: 2-3 K/s
0
0
50
100
150
200
s
250
t
2002-06-14
11
LS M776, LA M776, LO M776, LY M776
Empfohlenes Lötpaddesign IR Reflow Löten
Recommended Solder Pad IR Reflow Soldering
6 (0.236)
1.5 (0.059)
6 (0.236)
1.5 (0.059)
Hole on the PCB,
dimension: ø2.5 (0.098) +0.3 (0.012)
Lötstopplack
Solder resist
OHLPY963
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
2002-06-14
12
LS M776, LA M776, LO M776, LY M776
Gurtung / Polarität und Lage
Verpackungseinheit 3000/Rolle, ø180 mm
oder 11800/Rolle, ø330 mm
Method of Taping / Polarity and Orientation Packing unit 3000/reel, ø180 mm
or 11800/reel, ø330 mm
4 (0.157)
2 (0.079)
1.5 (0.059)
C
A
1.55 (0.061)
4 (0.157)
OHAY0224
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
2002-06-14
13
LS M776, LA M776, LO M776, LY M776
Revision History: 2002-06-14
Date of change
Previous Version: 2002-05-27
Page
Subjects (major changes since last revision)
value (wavelength amber)
4
2
3
7
1
wavelength grouping for yellow and orange
pad size from 16 mm2 to 5 mm2
max. Permissible Forward Current
insertion of “Not for new designs...”
2002-06-14
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2002-06-14
14
相关型号：
©2020 ICPDF网 联系我们和版权申明