LST770-J2 [INFINEON]
Visible LED, Clear;
| 型号： | LST770-J2 |
| 厂家： | 
Infineon |
| 描述： | Visible LED, Clear |
| 文件： | 总14页 (文件大小：169K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TOPLED® RG
LS T770, LO T770, LY T770, LG T770, LP T770
Besondere Merkmale
Features
• Gehäusetyp: weißes SMT-Gehäuse
• Besonderheit des Bauteils: Bauteil wird
top-down montiert und strahlt durch das PCB,
deshalb ideal zur Einkopplung in Lichtleiter
• Wellenlänge: 628 nm (super-rot), 606 nm
(orange), 587 nm (gelb), 570 nm (grün),
560 nm (pure green)
• package: white SMT package
• feature of the device: LED is mounted top down
and emits through the PCB, so an ideal LED for
coupling in light guides
• wavelength: 628 nm (super-red), 606 nm
(orange), 587 nm (yellow), 570 nm (green),
560 nm (pure green)
• Abstrahlwinkel: Lambertscher Strahler (120°)
• Technologie: GaAlP (super-rot, orange, gelb,
grün), GaP (pure green)
• viewing angle: Lambertian Emitter (120°)
• technology: GaAlP (super-red, orange, yellow,
green), GaP (pure green)
• optischer Wirkungsgrad: 1,5 lm/W (super-rot,
orange, gelb), 2,5 lm/W (grün),
• optical efficiency: 1.5 lm/W (super-red, orange,
yellow), 2.5 lm/W (green),
0,6 lm/W (pure green)
0.6 lm/W (pure green)
• Gruppierungsparameter: Lichtstärke,
Wellenlänge
• grouping parameter: luminous intensity,
wavelength
• Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
• assembly methods: suitable for all
SMT assembly methods
• Lötmethode: IR Reflow Löten und
Wellenlöten (TTW)
• soldering methods: IR reflow soldering and
TTW soldering
• Vorbehandlung: nach JEDEC Level 2
• Gurtung: 12-mm Gurt mit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
• preconditioning: acc. to JEDEC Level 2
• taping: 12-mm tape with 2000/reel, ø180 mm or
8000/reel, ø330 mm
Anwendungen
• optischer Indikator
Applications
• Hinterleuchtung (LCD, Handy, Schalter, Tasten,
Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
• Einkopplung in Lichtleiter
• Signal- und Symbolleuchten
• Innenbeleuchtung im Automobilbereich (z.B.
Instrumentenbeleuchtung, u.ä.)
• Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
• optical indicators
• backlighting (LCD, cellular phones, switches,
keys, displays, illuminated advertising, general
lighting)
• coupling into light guides
• signal and symbol luminaire
• interior automotive lighting. (e.g. dashboard
backlighting, etc.)
• marker lights (e.g. steps, exit ways, etc.)
2002-04-03
1
LS T770, LO T770, LY T770, LG T770, LP T770
Typ
Emissions-
farbe
Farbe der
Lichtaustritts-
fläche
Lichtstärke
Lichtstrom Bestellnummer
Type
Color of
Emission
Color of the
LightEmitting Intensity
Luminous
Luminous
Flux
Ordering Code
Area
IF = 10 mA
IV (mcd)
IF = 10 mA
ΦV (mlm)
LS T770-H2J2-1
LS T770-J2L1-1
super-red
colorless clear
colorless clear
colorless clear
colorless clear
colorless clear
3.55 ... 7.10
5.60 ... 14.00
15 (typ.)
28 (typ.)
Q62703-Q5101
Q62703-Q5102
LO T770-J1K1-24 orange
LO T770-K1L2-24
4.50 ... 9.00
7.10 ... 18.00
20 (typ.)
36 (typ.)
Q62703-Q5050
Q62703-Q5051
LY T770-J1K1-26 yellow
LY T770-K1L2-26
4.50 ... 9.00
7.10 ... 18.00
20 (typ.)
36 (typ.)
Q62703-Q5139
Q62703-Q5140
LG T770-K1L1-1 green
LG T770-L1M2-1
7.10 ... 14.00
11.20 ... 28.00
31 (typ.)
56 (typ.)
Q62703-Q5018
Q62703-Q5019
LP T770-G1H1-1 pure green
LP T770-H1J2-1
1.80 ... 3.55
2.80 ... 7.10 14.0 (typ.)
7.7 (typ.)
Q62703-Q5068
Q62703-Q5069
Anm.: -1 gesamter Farbbereich (siehe Seite 4)
-24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
-26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe,
die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich.
In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten.
Note: -1 Total color tolerance range (please see page 4)
-24 Total color tolerance range, delivery in single groups (please see page 5)
-26 Total color tolerance range, delivery in single groups (please see page 5)
The standard shipping format for serial types includes a lower or upper family group of 3 or 4
individual groups. Individual half groups are not available.
No packing unit / tape ever contains more than one luminous intensity half group.
2002-04-03
2
LS T770, LO T770, LY T770, LG T770, LP T770
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
LS, LO,
LY, LG
LP
Betriebstemperatur
Operating temperature range
Top
Tstg
Tj
– 40 … + 100
– 40 … + 100
+ 100
°C
°C
°C
mA
A
Lagertemperatur
Storage temperature range
Sperrschichttemperatur
Junction temperature
Durchlassstrom
Forward current
IF
30
Stoßstrom
IFM
0.5
Surge current
t ≤ 10 µs, D = 0.005
Sperrspannung
Reverse voltage
VR
5
V
Leistungsaufnahme
Power consumption
Ptot
95
90
mW
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Lötpad
Rth JA
Rth JS
400
180
K/W
K/W
Junction/soldering point
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
2002-04-03
3
LS T770, LO T770, LY T770, LG T770, LP T770
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
LS
LO LY
LG LP
Wellenlänge des emittierten Lichtes
Wavelength at peak emission
IF = 10 mA
(typ.) λpeak
635 610 586 572 557 nm
Dominantwellenlänge 1)
Dominant wavelength
IF = 10 mA
(typ.) λdom
628 606 587 570 560 nm
± 6
45
+3/–6 +8/–7 ± 6
± 6
22
Spektrale Bandbreite bei 50 % Irel max
Spectral bandwidth at 50 % Irel max
IF = 10 mA
(typ.)
40
45
25
nm
∆λ
Abstrahlwinkel bei 50 % IV (Vollwinkel)
Viewing angle at 50 % IV
(typ.) 2ϕ
120 120 120 120 120 Grad
deg.
Durchlassspannung 2)
Forward voltage
IF = 10 mA
(typ.) VF
(max.) VF
2.0 2.0 2.0 2.0 2.0
2.5 2.5 2.5 2.5 2.5
V
V
Sperrstrom
Reverse current
VR = 5 V
(typ.) IR
(max.) IR
0.01 0.01 0.01 0.01 0.01 µA
10 10 10 10 10 µA
Temperaturkoeffizient von λpeak
Temperature coefficient of λpeak
IF = 10 mA; –10°C ≤ T ≤ 100°C
(typ.) TCλpeak 0.11 0.12 0.10 0.11 0.11 nm/K
Temperaturkoeffizient von λdom
Temperature coefficient of λdom
IF = 10 mA; –10°C ≤ T ≤ 100°C
(typ.) TCλdom
(typ.) TCV
(typ.) ηopt
0.07 0.07 0.07 0.07 0.05 nm/K
–1.9 –1.9 –1.9 –1.4 –2.1 mV/K
1.5 1.5 1.5 2.5 0.6 lm/W
Temperaturkoeffizient von VF
Temperature coefficient of VF
IF = 10 mA; –10°C ≤ T ≤ 100°C
Optischer Wirkungsgrad
Optical efficiency
IF = 10 mA
1)
Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm.
Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt.
Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V.
2)
2002-04-03
4
LS T770, LO T770, LY T770, LG T770, LP T770
1) Wellenlängengruppen / Wavelength groups
Gruppe
Group
yellow
orange
Einheit
Unit
min. max. min. max.
2
3
4
5
6
580 583 600 603 nm
583 586 603 606 nm
586 589 606 609 nm
589 592
592 595
nm
nm
Helligkeits-Gruppierungsschema
Luminous Intensity Groups
Lichtgruppe
Luminous Intensity Group
Lichtstärke
Luminous Intensity
IV (mcd)
Lichtstrom
Luminous Flux
ΦV (mlm)
G1
G2
H1
H2
J1
1.80 ... 2.24
2.24 ... 2.80
2.80 ... 3.55
3.55 ... 4.50
4.50 ... 5.60
5.60 ... 7.10
7.10 … 9.00
9.00 …11.20
11.20 …14.00
14.00 …18.00
18.00 …22.40
22.40 …28.00
6.0 (typ.)
7.5 (typ.)
9.5 (typ.)
12.0 (typ.)
15.0 (typ.)
19.0 (typ.)
24.0 (typ.)
30.0 (typ.)
40.0 (typ.)
50.0 (typ.)
60.0 (typ.)
75.0 (typ.)
J2
K1
K2
L1
L2
M1
M2
Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ± 11%.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: K2-3
Example: K2-3
Lichtgruppe
Luminous Intensity Group
Halbgruppe
Half Group
Wellenlänge
Wavelength
K
2
3
2002-04-03
5
LS T770, LO T770, LY T770, LG T770, LP T770
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 10 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
OHL01697
100
%
Irel
80
Vλ
60
40
20
0
pure-green
400
450
500
550
600
650
700
nm
λ
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
OHL01660
40˚
30˚
20˚
10˚
0˚
ϕ
1.0
0.8
0.6
0.4
0.2
0
50˚
60˚
70˚
80˚
90˚
100˚
1.0
0.8
0.6
0.4
0˚
20˚
40˚
60˚
80˚
100˚
120˚
2002-04-03
6
LS T770, LO T770, LY T770, LG T770, LP T770
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Relative Lichtstärke IV/IV(10 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
OHL02145
OHL02146
10 2
10 1
IF
Ι V
mA
Ι V (10 mA)
10 0
5
10 1
5
10 -1
5
pure-green
10 0
green
red
10 -2
5
yellow
super-red
orange
5
super-red
orange/yellow
pure-green
green
10 -1
1.0
10 -3
10 -1
1.4
1.8
2.2
2.6
3.0
3.4
V
mA
Ι F
5
10 0
5
10 1
10 2
VF
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 10 mA
OHL02150
OHL00962
2.0
1.6
1.2
0.8
0.4
0.0
40
I V
IF
mA
I V (25 ˚C)
30
T
S
yellow
green
T
A
20
10
orange
super-red
pure-green
ΤA temp. ambient
ΤS temp. solder point
0
0
20
40
60
80 ˚C 100
0
20
40
60
80 C 100
T
T
A
2002-04-03
7
LS T770, LO T770, LY T770, LG T770, LP T770
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
OHL01686
10 3
tP
IF
= tP
IF
D
T
mA
T
D
=
0.005
0.01
0.02
0.05
0.1
10 2
5
0.2
0.5
DC
10 1
10-5
10-4 10-3 10-2 10-1
100 s 101
tp
2002-04-03
8
LS T770, LO T770, LY T770, LG T770, LP T770
Maßzeichnung
Package Outlines
2.1 (0.083)
3.0 (0.118)
1.7 (0.067)
1.0 (0.039)
0.9 (0.035)
2.6 (0.102)
2.3 (0.091)
2.1 (0.083)
0...0.1 (0.004)
0.6 (0.024)
0.4 (0.016)
Cathode marking
GPLY6899
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung:
Cathode mark:
abgeschrägte Ecke
bevelled Edge
Gewicht / Approx. weight: 40 mg
2002-04-03
9
LS T770, LO T770, LY T770, LG T770, LP T770
Lötbedingungen
Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil
(nach IPC 9501)
IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
300
˚C
250
200
150
100
50
T
240-245 ˚C
10-40 s
183 ˚C
120 to 180 s
Ramp-down rate up to 6 K/s
Defined for Preconditioning: up to 6 K/s
Ramp-up rate up to 6 K/s
Defined for Preconditioning: 2-3 K/s
0
0
50
100
150
200
s
250
t
2002-04-03
10
LS T770, LO T770, LY T770, LG T770, LP T770
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering
(acc. to CECC 00802)
OHLY0598
300
C
10 s
Normalkurve
standard curve
250
200
150
100
50
T
235 C ... 260 C
Grenzkurven
limit curves
2. Welle
2. wave
1. Welle
1. wave
ca 200 K/s
2 K/s
5 K/s
100 C ... 130 C
Zwangskühlung
2 K/s
forced cooling
0
0
50
100
150
200
s
250
t
2002-04-03
11
LS T770, LO T770, LY T770, LG T770, LP T770
Empfohlenes Lötpaddesign IR Reflow Löten / Wellenlöten (TTW)
Recommended Solder Pad IR Reflow Soldering / TTW soldering
6 (0.236)
1.5 (0.059)
6 (0.236)
1.5 (0.059)
Padgeometrie
für verbesserte
Wärmeableitung
Paddesign
for improved
heat dissipation
Cu-Fläche > 16 mm2
2.8 (0.110)
2.4 (0.094)
Cu-area > 16 mm 2
Hole on PCB
Lötstopplack
Solder resist
OHLPY977
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2002-04-03
12
LS T770, LO T770, LY T770, LG T770, LP T770
Gurtung / Polarität und Lage
Verpackungseinheit 2000/Rolle, ø180 mm oder
8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø180 mm or 8000/reel,
ø330 mm
4 (0.157)
1.5 (0.059)
2 (0.079)
Cathode identification
C
A
3 (0.118)
4 (0.157)
OHAY2272
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2002-04-03
13
LS T770, LO T770, LY T770, LG T770, LP T770
Revision History: 2002-04-03
Previous Version: 2001-03-12
Page
Subjects (major changes since last revision)
2
5
2
New values for luminous flux
New wavelength grouping
wavelength grouping for yellow and orange
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2002-04-03
14
相关型号：
©2020 ICPDF网 联系我们和版权申明