OM1326SMM [INFINEON]
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326SMM with Standard Packaging;型号: | OM1326SMM |
厂家: | Infineon |
描述: | Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326SMM with Standard Packaging |
文件: | 总4页 (文件大小:39K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OM1326SMM OM1326NMM OM1326STM
OM1326N2M
OM1326NKM OM1326NTM
1.5 AMP POSITIVE ADJUSTABLE VOLTAGE
REGULATOR APPROVED TO DESC DRAWING 7703407
Three Terminal, Precision Adjustable
Positive Voltage Regulator In Hermetic
Style Packages (LM117AHV)
Please see mechanical
outlines herein
FEATURES
• Similar To Industry Standard LM117AHV
• Approved To DESC Standardized Military Drawing Number 7703407
• Built In Thermal Overload Protection
• Short Circuit Current Limiting
• Available In Six Package Styles
• Maximum Output Voltage Tolerance Is Guaranteed to + 1%
DESCRIPTION
These three terminal positive regulators are supplied in hermetically sealed
packages. All protective features are designed into the circuit, including thermal
shutdown, current-limiting, and safe-area control. With heat sinking, these devices
can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5
amps. The unit also features output voltages that can be fixed from 1.2 volts to 57
volts using external resistors.
ABSOLUTE MAXIMUM RATINGS T @ 25°C
c
Power Dissipation
Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W
Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W
Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
Thermal Resistance, Junction to Case:
Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W
Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W
Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W
Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0°C/W
Maximum Output Current:
3.5
Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A
Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Recommended Operating Conditions:
Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 57 VDC
Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C
Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 61.25 VDC
4 11 R2
Supersedes 1 07 R1
3.5 - 25
OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM, OM1326N2M
ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified)
OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM
Parameter
Symbol
Test Conditions
VDIFF = 3.0V, TA = 25°C
VDIFF = 3.3V
Min.
1.238
1.225
1.225
1.225
-4.5
-9
Max.
1.262
1.270
1.270
1.270
4.5
-9
Unit
Reference Voltage
VREF
•
•
•
V
VDIFF = 40V
VDIFF = 60V
Line Regulation
(Note 1)
RLINE
3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C
3.3V ≤ VDIFF ≤ 40V, Vout = Vref
•
•
•
mV
mV
40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C
40V ≤ VDIFF ≤ 60V, Vout = Vref
-5
5
-10
10
Load Regulation
(Note 1)
RLOAD
VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C
VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A
-15
15
-15
15
V
DIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C
VDIFF = 40V, 10mA ≤ IL ≤ 195mA
VDIFF = 60V, 10mA ≤ IL ≤ 30mA
Vin = 14.6V, IL = 1.5A
-15
15
•
•
-15
15
-15
15
Thermal Regulation
VRTH
-5
5
mV
dB
Pd = 20 Watts, t = 20 ms, TA = 25°C
f = 120 Hz, Vout = Vref
Ripple Rejection
(Note 2)
RN
•
66
CAdj = 10 µF, Iout = 100 mA
VDIFF = 3.0V, TA = 25°C
Adjustment Pin Current
IAdj
100
100
100
100
5
VDIFF = 3.3V
•
•
•
µA
VDIFF = 40V
VDIFF = 60V
Adjustment Pin
Current Change
∆IAdj
VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C
VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A
-5
-5
-5
-5
-5
-5
-5
•
5
VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C
5
VDIFF = 40V, 10mA ≤ IL ≤ 195mA
•
5
µA
3.0V ≤ VDIFF ≤ 40V, TA = 25°C
3.3V ≤ VDIFF ≤ 40V
5
•
•
5
3.3V ≤ VDIFF ≤ 60V
5
Miminum Load Current
ILmin
VDIFF = 3.0V, Vout = 1.4V (forced)
5.0
5.0
5.0
7.0
3.5
1.5
0.50
VDIFF = 3.3V, Vout = 1.4V (forced)
•
•
•
•
mA
VDIFF = 40V, Vout = 1.4V (forced)
VDIFF = 60V, Vout = 1.4V (forced)
VDIFF = 5V
Current Limit
(Note 2)
ICL
1.5
0.3
VDIFF = 40V, TA = 25°C
A
VDIFF = 60V, TA = 25°C
0.05
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. If not tested, shall be guaranteed to the specified limits.
3. The • denotes the specifications which apply over the full operating temperature range.
PART NUMBER DESIGNATOR
3.5
Standard Military Drawing Number
Omnirel Part Number
Omnirel Package Designation
7703407M
7703407U
7703407T
7703407Y
7703407N
77034072
OM1326SMM
OM1326STM
OM1326NTM
OM1326NKM
OM1326NMM
OM1326N2M
SMD-3
TO-257 (Isolated)
TO-257 (non-Isolated)
TO-3
SMD-1
LCC-20
3.5 - 26
OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM, OM1326N2M
ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified)
OM1326N2M
Parameter
Symbol
Test Conditions
VDIFF = 3.0V, TA = 25°C
VDIFF = 3.3V
Min.
1.238
1.225
1.225
1.225
-4.5
-9
Max.
1.262
1.270
1.270
1.270
4.5
-9
Unit
Reference Voltage
VREF
•
•
•
V
VDIFF = 40V
VDIFF = 60V
Line Regulation
(Note 1)
RLINE
3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C
3.3V ≤ VDIFF ≤ 40V, Vout = Vref
•
•
•
mV
mV
40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C
40V ≤ VDIFF ≤ 60V, Vout = Vref
-5
5
-10
10
Load Regulation
(Note 1)
RLOAD VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C
VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA
-15
15
-15
15
VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C
VDIFF = 40V, 10mA ≤ IL ≤ 100 mA
-15
15
•
•
-15
15
VDIFF = 60V, 10mA ≤ IL ≤ 20 mA
-15
15
Thermal Regulation
VRTH
Vin = 14.6V, IL = 300 mA
Pd = 4.0 Watts, t = 20 ms, TA = 25°C
f = 120 Hz, Vout = Vref
-2
2
mV
dB
Ripple Rejection
(Note 2)
RN
•
66
CAdj = 10 µF, Iout = 100 mA
VDIFF = 3.0V, TA = 25°C
Adjustment Pin Current
IAdj
100
100
100
100
5
VDIFF = 3.3V
•
•
•
µA
VDIFF = 40V
VDIFF = 60V
Adjustment Pin
Current Change
∆IAdj
VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C
VDIFF = 3.3V, 10mA ≤ IL ≤500 mA
-5
-5
-5
-5
-5
-5
-5
•
5
V
DIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C
VDIFF = 40V, 10mA ≤ IL ≤ 100 mA
3.0V ≤ VDIFF ≤ 40V, TA = 25°C
3.3V ≤ VDIFF ≤ 40V
5
•
5
µA
5
•
•
5
3.3V ≤ VDIFF ≤ 60V
5
Miminum Load Current
ILmin
VDIFF = 3.0V, Vout = 1.4V (forced)
VDIFF = 3.3V, Vout = 1.4V (forced)
VDIFF = 40V, Vout = 1.4V (forced)
VDIFF = 60V, Vout = 1.4V (forced)
VDIFF = 5V
5.0
5.0
5.0
7.0
1.65
0.65
0.28
•
•
•
•
mA
Current Limit
(Note 2)
ICL
0.5
VDIFF = 40V, TA = 25°C
0.15
0.02
A
VDIFF = 60V, TA = 25°C
Notes: Please see page 34.
STANDARD APPLICATION
Vout
Vin
3.5
* Cin is required if regulator is located an
appreciable distance from power supply filter.
OM1326STM
R1
240Ω
** Co is not needed for stability, however it does
improve transient response.
IAdj
Adjust
R2
Cin*
0.1 µF
Co**
1.0 µF
R2
R1
Vout = 1.25 V (1 +
)+ IAd j R2
Since IAdj is controlled to less than 100 µA,
the error associated with this term is negligible
in most applications.
3.5 - 27
OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM, OM1326N2M
MECHANICAL OUTLINE
.425O
.200O
.190O
.420O
.410O
1
2
.045O
.035O
.100O
3
.200O
.425O
.035 WIDEO
FLAT 3 PLCS.O
.665O
.645O
.537O
.150O
.140O
O
O
.350 MIN.O
± .020O
.115O
.430O
.410O
.527O
.160O
1 2 3
.020O
.080 O
.038 MAX.O
OM1326SMM
.750O
.500O
Front View
Pin 1 - Adjust
Pin 2 - Input
Pin 3 - Output
Case- Isolated
O
.005O
.120 TYP.O
.100 TYP.O
.035O
.025O
.140
.140
.140
OM1326STM
Isolated
Front View
Pin 1 - Adjust
Pin 2 - Output
Pin 3 - Input
Tab - Isolated
OM1326NTM
Non-Isolated
Front View
Pin 1 - Adjust
Pin 2 - Output
Pin 3 - Input
Tab - Output
.015
.075
.157
.075
.030
2
1
MIN.
3
.415
.062
.375
OM1326NMM
Pin 1 - Adjust
Pin 2 - Input
Pin 3 - Output
1.197
1.177
1.53
REF.
.009 R.
20 PLCS.
.065
0.675
0.655
.020 X45°
.040
4
.075 (±.010)
0.875
MAX.
0.440
0.420
REF.
TYP.
0.188 R.
MAX.
(±.003)
.025
TYP.
0.135
MAX.
.010
9
3
2
1
.160
SQ. REF.
0.450
0.250
1
.085
13
19
0.312
MIN.
.025 SQ.
TYP.
14
.050
TYP.
18
.003
0.525 R.
MAX.
0.225
0.205
0.043
0.038
0.161
0.151
.050 (±.005)
TYP.
.040 X45°
REF (3 PL)
SEATING
PLANE
2 PLCS.
OM1326N2M
Pin 1 NC
Pin 2 NC
Pin 3 NC
Pin 4 NC
Pin 11 VIN
OM1326NKM
Pin 12 VOUT
3.5
Pin 1 - Adjust
Pin 2 - Input
Case- Output
Pin 13 VOUT
Pin 14 VOUT(Sense)
Pin 5 NC
Pin 6 NC
Pin 7 NC
Pin 8 NC
Pin 9 NC
Pin 10 NC
Pin 15 NC
Pin 16 NC
Pin 17 NC
Pin 18 ADJUST
Pin 19 NC
Pin 20 VIN
For additional information please see the mechanical outline section.
相关型号:
OM1326STM
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326STM with Standard Packaging
INFINEON
OM1327NTMPBF
Adjustable Negative Standard Regulator, 1.2V Min, 47V Max, MSFM3, HERMETIC SEALED, TO-257, 3 PIN
INFINEON
OM1327SMMPBF
Adjustable Negative Standard Regulator, 1.2V Min, 47V Max, HERMETIC SEALED, SMD3-3
INFINEON
©2020 ICPDF网 联系我们和版权申明