OM1815STM [INFINEON]
Fixed Positive Standard Regulator, 15VBIPolar, MSFM3, METAL, TO-257AA, 3 PIN;型号: | OM1815STM |
厂家: | Infineon |
描述: | Fixed Positive Standard Regulator, 15VBIPolar, MSFM3, METAL, TO-257AA, 3 PIN 局域网 输出元件 调节器 |
文件: | 总4页 (文件大小:31K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OM1805STM OM1812STM OM1815STM
OM1805NTM OM1812NTM OM1815NTM
ISOLATED HERMETIC TO-257AA FIXED VOLTAGE
REGULATORS APPROVED TO DESC DRAWINGS
Three Terminal, Fixed Voltage, 1.5 Amp
Precision Positive Regulators In Hermetic
JEDEC TO-257AA Package
FEATURES
• Isolated Hermetic Package, JEDEC TO-257AA Outline
• Output Voltages: 5V, 12V, 15V
• Output Voltages Set Internally to ±1%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Also Available In Non-Isolated Package
• Similar To Industry Standards 7805, 7812, 7815
DESCRIPTION
These three terminal positive regulators are supplied in a hermetically sealed metal
package whose outline is similar to the industry standard TO-220 plastic package. All
protective features are designed into the circuit, including thermal shutdown, current
limiting and safe-area control. With heat sinking, they can deliver over
1.5 amps of output current. These units feature internally trimmed output voltages
±1% of nominal voltage. These units are ideally suited for Military applications where
a hermetically sealed package is required.
3.3
PART NUMBER DESIGNATOR
Standard Military Drawing Number
5962-8778201 UX
Omnirel Part Number
OM1805STM
OM1805NTM
OM1812STM
OM1812NTM
OM1815STM
OM1815NTM
5962-8778201 TX
5962-8777601 UX
5962-8777601 TX
5962-8855301 UX
5962-8855301 TX
“U” = Isolated
“T” = Non-Isolated
4 11 R2
Supersedes 1 07 R1
3.3 - 57
OM1805STM/NTM - OM1815STM/NTM
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +35 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Typical Power/Thermal Charateristics:
Rated Power @ 25° C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15W
TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3W
Thermal Resistance
qJC Case U. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W
JC Case T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W
JA Case T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42°C/W
q
q
a
ELECTRICAL CHARACTERISTICS 5 Volt VIN = 10V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
4.92
4.85
Max.
5.08
5.15
Unit
Output Voltage
VOUT
TA = 25°C
V
V
IN = 7.5V to 20V
O = 5mA to 1.0 A, P < 15W
VIN = 7.5V to 20V
•
V
I
Line Regulation
(Note 1)
VRLINE
VRLOAD
ISCD
5
12
4
mV
mV
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
•
(Note 4)
VIN = 8.0V to 12V
10
12
25
6
Load Regulation
(Note 1)
IO = 5mA to 1.5 Amp
O = 5mA to 1.0 Amp
O = 250mA to 750 mA
I
I
15
6
Standby Current Drain
•
•
6.5
0.8
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
DISCD
(Line)
DISCD
(Load)
VDO
VIN = 7.5V to 20V
IO = 5mA to 1000mA
•
0.5
mA
TA = 25°C, DVOUT = 100mV, IO = 1.0A
2.5
3.3
1.2
2.8
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
TA = 25°C
VIN = 35V
1.5
A
•
•
A
Ripple Rejection
DVIN
DVOUT
NO
f =120 Hz, DVIN = 10V
(Note 3)
68
60
dB
dB
µV/V
RMS
mV
3.3
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
75
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
3.3 - 58
OM1805STM/NTM - OM1815STM/NTM
ELECTRICAL CHARACTERISTICS 12 Volt VIN = 19V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
11.88
11.64
Max.
12.12
12.36
Unit
Output Voltage
VOUT
TA = 25°C
V
VIN = 14.5V to 27V
•
V
IO = 5mA to 1.0 A, P < 15W
Line Regulation
(Note 1)
VRLINE
VRLOAD
ISCD
VIN = 14.5V to 27V
18
50
9
mV
mV
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
•
(Note 4)
VIN = 16V to 22V
30
32
60
20
40
6.0
6.5
0.8
Load Regulation
(Note 1)
IO = 5mA to 1.5 Amp
O = 5mA to 1.0 Amp
O = 250mA to 750 mA
I
I
Standby Current Drain
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
DISCD
(Line)
DISCD
(Load)
VDO
VIN = 15V to 30V
IO = 5mA to 1000mA
•
•
0.5
mA
DVOUT = 100mV, IO = 1.0A
TA = 25°C
2.5
3.3
1.2
2.8
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
1.5
VIN = 35V
A
•
•
A
Ripple Rejection
DVIN
DVOUT
NO
f =120 Hz, DVIN = 10V
(Note 3)
61
54
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
120
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits. 4. Minimum load current for full line regulation = 5.0 mA.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
MECHANICAL OUTLINE
CONNECTION DIAGRAM
3.3
.200
.190
.420
.410
.045
.035
4
.665
.645
.150
.140
.537
.527
.430
.410
.038 MAX.
.005
Case T
1 Input
2 Ground
3 Output
4 Ground
Case U
1 Input
2 Ground
3 Output
4 No Connection
.750
.500
1
2
3
.120 TYP.
.100 TYP.
.035
.025
3.3 - 59
OM1805STM/NTM - OM1815STM/NTM
ELECTRICAL CHARACTERISTICS 15 Volt VIN = 23V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
14.8
14.6
Max.
15.2
15.4
Unit
Output Voltage
VOUT
TA = 25°C
V
VIN = 18.5V to 30V
•
V
IO = 5mA to 1.0 A, P < 15W
Line Regulation
(Note 1)
VRLINE
VRLOAD
ISCD
VIN = 17.5V to 30V
20
50
15
25
35
75
21
45
6.0
6.5
0.8
mV
mV
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
•
(Note 4)
VIN = 20V to 26V
Load Regulation
(Note 1)
IO = 5mA to 1.5 Amp
O = 5mA to 1.0 Amp
O = 250mA to 750 mA
I
I
Standby Current Drain
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
DISCD
(Line)
DISCD
(Load)
VDO
VIN = 18.5V to 30V
IO = 5mA to 1000mA
•
0.5
mA
TA = 25°C, DVOUT = 100mV, IO = 1.0A
2.5
3.3
1.2
2.8
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
TA = 25°C
VIN = 35V
1.5
A
•
•
A
Ripple Rejection
DVIN
DVOUT
NO
f =120 Hz, DVIN = 10V
(Note 3)
54
52
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
Long Term Stability
(Note 3)
DVOUT
Dt
TA = 25°C, t = 1000 hrs.
150
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
TYPICAL PERFORMANCE CHARACTERISTICS
3.3
PEAK OUTPUT
DROPOUT VOLTAGE
RIPPLE REJECTION
2.5
2
100
80
3.5
3
Tj = -55°C
VOUT = 5V
IOUT = 1A
2.5
1.5
1
60
40
20
0
2
IOUT = 500mA
Tj = 25°C
1.5
IOUT = 0A
VIN - V = 8VDC +3.5Vrms
IOUT = 1A
1
0.5
Tj = 150°C
Tj = 25°C
0.5
0
DVOUT = 100MV
DVOUT = 100mV
0
-75-50 -25
0
25 50 75 100 125 150
0
5
10 15 20
25
30 35
10
100
1k
10k
100k
Input To Output Differential (V)
Junction Temperature (°C)
Frequency (Hz)
205 Crawford Street, Leominster, MA 01453 USA (508) 534-5776 FAX (508) 537-4246
相关型号:
OM183-12SC
Fixed Positive LDO Regulator, 12V, 13.5V Dropout, BIPolar, MSFM3, ISOLATED, TO-258, 3 PIN
INFINEON
OM183-15SC
Fixed Positive LDO Regulator, 15V, 17.5V Dropout, BIPolar, MSFM3, ISOLATED, TO-258, 3 PIN
INFINEON
OM183-5SC
Fixed Positive LDO Regulator, 5V, 6.5V Dropout, BIPolar, MSFM3, ISOLATED, TO-258, 3 PIN
INFINEON
OM1830NCMPBF
Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, MSFM3, HERMETIC SEALED, METAL, TO-258AA, 3 PIN
INFINEON
©2020 ICPDF网 联系我们和版权申明