OM1915N2M [INFINEON]
HERMETIC SURFACE MOUNT FIXED VOLTAGE NEGATIVE REGULATORS APPROVED TO DESC DRAWING; HERMETIC表面安装固定电压负调节批准降序DRAWING
| 型号： | OM1915N2M |
| 厂家： | 
Infineon |
| 描述： | HERMETIC SURFACE MOUNT FIXED VOLTAGE NEGATIVE REGULATORS APPROVED TO DESC DRAWING |
| 文件： | 总4页 (文件大小：30K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OM1905N2M OM1915N2M
OM1912N2M
HERMETIC SURFACE MOUNT FIXED VOLTAGE NEGATIVE
REGULATORS APPROVED TO DESC DRAWING
LCC 20, Fixed Voltage, Precision
Negative Regulators In Hermetic
Surface Mount Package
FEATURES
• Hermetic Surface Mount Package
• Output Voltages: -5V, -12V, -15V
• Output Voltages Set Internally To ±1%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Product Is Available Hi-Rel Screened
DESCRIPTION
These negative regulators are supplied in a hermetically sealed surface mount
package. All protective features are designed into the circuit including thermal
shutdown, current limiting and safe-area control. With heat sinking, they can deliver
over .5 amps of output current. These units feature internally trimmed output
voltages to ±1% of nominal voltage. Standard voltages are -5V, -12V, and -15V.
These units are ideally suited for Military applications where a hermetic surface
mount package is required.
PART NUMBER DESIGNATOR
Standard Military Drawing Number
5962-8874601 2X
Omnirel Part Number
OM1905N2M
5962-8874701 2X
OM1912N2M
5962-8874801 2X
OM1915N2M
3.5
3.5 - 49
4 11 R0
OM1905N2M - OM1915N2M
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -35 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . .- 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Typical Power/Thermal Charateristics:
Rated Power @ 25° C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2W
TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1040 mW
Thermal Resistance
θJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25°C/W
θJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120°C/W
ELECTRICAL CHARACTERISTICS -5 Volt VIN = -10V, Io = 100mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
TA = 25°C
Min.
-4.95
-4.85
Max.
-5.05
-5.15
Unit
V
Output Voltage
VOUT
VIN = -7.5V to -20V
IO = 5 mA to 500 mA, P < 2W
VIN = -7.5V to -20V
•
V
Line Regulation
(Note 1)
VRLINE
12
25
5
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
(Note 4)
VIN = -8.0V to -12V
IO = 5mA to 500 mA
12
25
50
2.5
3.0
0.4
Load Regulation
(Note 1)
VRLOAD
Standby Current Drain
ISCD
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
∆ISCD
(Line)
∆ISCD
(Load)
VDO
VIN = -7.0V to -20V
IO = 5mA to 500 mA
•
•
0.4
mA
∆VOUT = 100mV, IO = 500 mA
TA = 25°C
2.5
1.7
.7
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
0.5
VIN = -35V
A
•
•
2.0
A
Ripple Rejection
∆VIN
∆VOUT
NO
f =120 Hz, ∆VIN = -10V
(Note 3)
63
60
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
75
Long Term Stability
(Note 3)
∆VOUT
∆t
TA = 25°C, t = 1000 hrs.
Notes:
3.5
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = -35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
3.5 - 50
OM1905N2M - OM1915N2M
ELECTRICAL CHARACTERISTICS -12 Volt VIN = -19V, Io = 100 mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
TA = 25°C
Min.
Max.
-12.12
-12.36
Unit
V
Output Voltage
VOUT
-11.88
-11.64
VIN = -14.5V to -27V
IO = 5mA to 500 mA, PD < 2 W
VIN = -14.5V to -27V
•
V
Line Regulation
(Note 1)
VRLINE
20
50
10
30
32
60
3.5
4.0
0.8
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
(Note 4)
VIN = -16V to -22V
Load Regulation
(Note 1)
VRLOAD
IO = 5 mA to 500 mA
Standby Current Drain
ISCD
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
∆ISCD
(Line)
∆ISCD
(Load)
VDO
VIN = -14.5V to -27V
IO = 5mA to 500 mA
•
•
0.5
mA
∆VOUT = 100mV, IO = 500 mA
TA = 25°C, IO = 5 mA to 1A
VIN = -35V
1.8
1.7
.7
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
0.5
A
•
•
2.0
A
Ripple Rejection
∆VIN
∆VOUT
NO
f =120 Hz, ∆VIN = -10V
(Note 3)
56
53
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100 KHz
40
Long Term Stability
(Note 3)
∆VOUT
∆t
TA = 25°C, t = 1000 hrs.
120
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = -35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
MECHANICAL OUTLINE
PIN CONNECTION
Terminal Number
1
NC
VINput
NC
2
3
.009 R.
20 PLCS.
4
VOUTput
VOUTput
NC
.065
5
6
.020 X45°
.040
4
.075 (±.010)
TYP.
7
VOUTput
NC
3.5
8
REF.
9
NC
10
11
12
13
14
15
16
17
18
19
20
NC
(±.003)
.025
TYP.
NC
.010
9
3
NC
NC
NC
.160
SQ. REF.
1
Ground
NC
.085
Ground
NC
13
19
NC
VINput
.025 SQ.
TYP.
14
.050
TYP.
18
.003
Note: The input pins (2 and 20) are to be connected
together, the output pins (4,5, and 7) are to be
connected together and the ground pins (15 and 17)
are to be connected together for operation.
.050 (±.005)
TYP.
.040 X45°
REF (3 PL)
3.5 - 51
OM1905N2M - OM1915N2M
ELECTRICAL CHARACTERISTICS -15 Volt VIN = -23V, Io = 100mA, -55°C ≤ TA ≤ 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
TA = 25°C
Min.
Max.
-15.15
-15.45
Unit
V
Output Voltage
VOUT
-14.85
-14.55
VIN = -17.5V to -30V
IO = 5 mA to 500 m A, PD < 2 W
VIN = -17.5V to -30V
•
V
Line Regulation
(Note 1)
VRLINE
25
50
15
25
50
90
6.0
6.5
0.8
mV
mV
mV
mV
mV
mV
mA
mA
mA
•
•
•
(Note 4)
VIN = -20V to -26V
IO = 5mA to 500 mA
Load Regulation
(Note 1)
VRLOAD
Standby Current Drain
ISCD
•
•
Standby Current Drain
Change With Line
Standby Current Drain
Change With Load
Dropout Voltage
∆ISCD
(Line)
∆ISCD
(Load)
VDO
VIN = -17.5V to -30V
IO = 5mA to 500 mA
•
•
0.5
mA
∆VOUT = 100mV, IO = 500 mA
TA = 25°C
2.5
1.7
0.7
2.0
V
A
Peak Output Current
Short Circuit Current
(Note 2)
IO (pk)
IDS
0.5
VIN = -35V
A
•
•
A
Ripple Rejection
∆VIN
∆VOUT
NO
f =120 Hz, ∆VIN = -10V
(Note 3)
53
50
dB
dB
µV/V
RMS
mV
Output Noise Voltage
(Note 3)
TA = 25°C, f =10 Hz to 100KHz
40
Long Term Stability
(Note 3)
∆VOUT
∆t
TA = 25°C, t = 1000 hrs.
150
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = -35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
4. Minimum load current for full line regulation = 5.0 mA.
3.5
相关型号：
OM2005EA26
Fixed Resistor, Carbon Film, 1W, 20ohm, 500V, 5% +/-Tol, 450ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
OHMITE
OM2005EA52
Fixed Resistor, Carbon Film, 1W, 20ohm, 500V, 5% +/-Tol, 450ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
OHMITE
©2020 ICPDF网 联系我们和版权申明