PVO402PPBF [INFINEON]

Transistor Output SSR, 1-Channel, 3750V Isolation, PLASTIC, SURFACE MOUNT, THIN-PAK, DIP-8;
PVO402PPBF
型号: PVO402PPBF
厂家: Infineon    Infineon
描述:

Transistor Output SSR, 1-Channel, 3750V Isolation, PLASTIC, SURFACE MOUNT, THIN-PAK, DIP-8

继电器 电子
文件: 总6页 (文件大小:251K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Previous Datasheet  
Index  
Next Data Sheet  
Data Sheet No. 1.036B  
PVO402P  
Microelectronic  
Power IC Relay  
HEXFET® POWER MOSFET PHOTOVOLTAIC RELAY  
Dual Pole, Normally Open + Ring Detector  
0-400V, 120mA AC/DC  
Applications  
General Description  
The PVO402P Photovoltaic Relay is a dual-pole,  
normally open solid-state relay plus ring detec-  
tor. By integrating these two functions in one  
package it can replace two discrete components,  
i.e., a relay and an AC-input opto-coupler. The  
relay portion of PVO402P utilizes International  
Rectifier’s HEXFET power MOSFET as the out-  
put switch, driven by an integrated circuit  
photovoltaic generator of novel construction.The  
output switch is controlled by radiation from a  
GaAlAs light emitting diode (LED) which is opti-  
cally isolated from the photovoltaic generator.  
The ring detector portion of PVO402P has two  
LEDs in inverse parallel connection as the input  
sensing element and a silicon NPN photo-tran-  
sistor as the output switch.  
On/Off Hook switch  
Dial pulsing  
Ringer injection  
Ring detection  
Loop current detection  
PVO402P Features  
HEXFET Power MOSFET output  
Bounce-free operation  
3,750 V  
I/O isolation  
RMS  
Linear AC/DC operation  
Solid-State reliability  
UL recognized  
PVO402P is ideally suited for PCMCIA fax/mo-  
dem cards. Its extremely low profile allows it to  
be used in Type II cards whose outer shells are  
only 5mm thick.  
PVO402P Relays are packaged in an 8-pin,  
molded ‘Thin-Pak’ DIP package with ‘gull-wing’  
surface mount terminals. It is available in plastic  
shipping tubes or on tape-and-reel. Please refer  
to Part Identification (opposite) for details.  
PVO402P  
‘Thin-Pak’  
Part Identification  
PVO402P  
PVO402P-T  
SMT, plastic shipping tube  
SMT, T&R  
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)  
To Order  
 
 
Previous Datasheet  
Index  
Next Data Sheet  
PVO402P  
Electrical Specifications (-40°C TA +85°C unless otherwise specified)  
RELAY  
INPUT CHARACTERISTICS  
Min. Control Current (See Fig.1)  
Limits  
3.0  
Units  
mA  
Max. Control Current for Off-State Resistance @T =+25°C  
0.4  
mA  
A
Control Current Range (Caution: current limit input LED, see Fig.6)  
Max. Reverse Voltage  
3.0 to 25  
mA  
V
7.0  
OUTPUT CHARACTERISTICS  
Operating Voltage Range  
Limits  
0 to ±400  
Units  
V(DC or AC peak)  
Max. Load Current @ TA=+40°C  
5mA Control (See Fig.1)  
120  
mA  
Max. On-State Resistance @TA=+25°C  
For 50mA Pulsed Load, 5mA Control (See Fig.4)  
Max. Off-State Leakage @TA=+25°C, ±400V (See Fig.5)  
Max. Turn-On Time @TA=+25°C (See Fig. 7)  
For 50mA, 100 VDC Load, 5mA Control  
Max. Turn-Off Time @TA=+25°C (See Fig. 7)  
For 50mA, 100 VDC Load, 5mA Control  
Max. Output Capacitance @ 50VDC  
35  
1.0  
µA  
2.0  
ms  
0.5  
12  
ms  
pF  
DETECTOR  
INPUT CHARACTERISTICS  
Min. Control Current @ IC = 2mA, VCE = 0.5V  
Limits  
6.0  
Units  
mA  
Max. Control Current for Off-State LeakageIC=1µA, VCE=5V @TA=+25°C  
5
µA  
Control Current Range (Caution: current limit input LED, see Fig.6)  
6.0 to 25  
mA  
OUTPUT CHARACTERISTICS  
Limits  
20  
33  
0.5  
500  
150  
Units  
VDC  
%
V
nA  
Min. Collector-Emitter Breakdown Voltage @IC = 10µA  
Min.Current Transfer Ratio @ ILED = 6mA, VCE = 5V (see Fig. 9)  
Max. Saturation Voltage @ ILED= 16mA, IC = 2mA  
Max. Leakage Current @ ILED=0mA, VCE= 5V  
Max. Power Dissipation @TA=+25°C (derate linearly 2.0mW/°C)  
mW  
COMBINED  
GENERAL CHARACTERISTICS  
Limits  
3750  
1000  
Units  
VRMS  
VDC  
Min. Dielectric Strength, Input-Output  
Min. Dielectric Strength, Relay-Detector  
Min. Insulation Resistance, Input-Output  
@TA=+25°C, 50%RH, 100VDC  
1012  
3.0  
pF  
Max. Capacitance, Input-Output  
Max. Pin Soldering Temperature (10 seconds max.)  
Ambient Temperature Range: Operating  
Storage  
+260  
-40 to +85  
-40 to +100  
°C  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
PVO402P  
Connection Diagram  
1
2
3
4
8
7
6
5
200  
125  
Relay  
= 5 mA  
Relay  
I
LED  
100  
75  
50  
25  
0
150  
100  
50  
3 mA  
0
0
0
20  
40  
60  
80  
100  
10  
20  
30  
40  
50  
Ambient Temperature (deg. C)  
Vdd, Drain to Drain Voltage (V)  
Figure 1. Current Derating Curve  
Figure 2. Typical Output Capacitance  
To Order  
 
Previous Datasheet  
Index  
Next Data Sheet  
PVO402P  
2.5  
2.0  
1.5  
1.0  
0.5  
0
200  
150  
100  
50  
Relay  
5 mA Control  
I
= 10 mA  
D
-5.0 -4.0 -3.0 -2.0 -1.0  
1.0 2.0 3.0 4.0 5.0  
-50  
-100  
-150  
-200  
5 mA Control  
@25 C, pulsed  
°
0
25  
50  
75 100 125  
-50 -25  
Relay’s Output Voltage Drop (Vdd)  
Ambient Temperature (deg. C)  
Figure 3. Linearity Characteristics  
Figure 4. Typical Normalized On-Resistance  
20  
100  
CAUTION: Provide current  
limiting so that 25mA max.  
steady-state control current  
rating is not exceeded.  
16  
Relay  
30  
10  
Relay and  
Detector  
12  
3.0  
1.0  
0.3  
0.1  
8
4
0
0
5
25  
45  
65 85  
105  
0.5  
1.0  
1.5  
2.0  
-35 -15  
LED Forward Voltage Drop (Volts DC)  
Ambient Temperature (deg. C)  
Figure 5. Typical Normalized Off-State  
Leakage  
Figure 6. Input Characteristics  
(Current Controlled)  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
PVO402P  
20  
Relay  
10  
I
LED  
90%  
5
3
I
10%  
D
t
dly  
t
off  
t
t
t
off  
50 100  
Delay Time (microseconds)  
dly  
on  
t
on  
1000 2000  
200  
500  
20  
Figure 7. Typical Delay Times  
Figure 8. Delay Time Definitions  
50  
I
10 mA  
=
LED  
Detector  
40  
30  
20  
10  
0
5 mA  
2 mA  
1 mA  
2
4
6
8
0
10  
Collector-Emitter Voltage (V)  
Figure 9.Typical Transfer Characteristics  
To Order  
Previous Datasheet  
Index  
Next Data Sheet  
PVO402P  
Mechanical Specifications  
(Dimensions in millimeters (inches))  
1. CONTROLLING DIMENSION: INCH  
DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD  
PROTRUSIONS SHALL NOT EXCEED 0.25 (.010).  
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331  
EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 713215  
IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 2Z8, Tel: (905) 475 1897  
IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590  
IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111  
IR FAR EAST: K&H Bldg., 2F, 3-30-4 Nishi-Ikeburo 3-Chome, Toshima-Ku, Tokyo, Japan 171 Tel: ++ 81 3 3983 0641  
IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: ++ 65 221 8371  
http://www/irf.com/  
Data and specifications subject to change without notice. 5/96  
To Order  

相关型号:

PVP02-3,81

Strip Terminal Block,
ALTECH

PVP03-5.00

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s),
ALTECH

PVP04-3,81

Strip Terminal Block,
ALTECH

PVP06-3,81

Strip Terminal Block,
ALTECH

PVP06-5.00

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s),
ALTECH

PVP07-3,81

Strip Terminal Block,
ALTECH

PVP07-5.00

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s),
ALTECH

PVP08-3,81

Strip Terminal Block,
ALTECH

PVP08-5.00

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s),
ALTECH

PVP11-3,81

Strip Terminal Block,
ALTECH

PVP12-3,81

Strip Terminal Block,
ALTECH

PVP12-5.00

Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s),
ALTECH