PVT412PBF [INFINEON]

Transistor Output SSR, 1-Channel, 4000V Isolation, LEAD FREE PACKAGE, DIP-6;
PVT412PBF
型号: PVT412PBF
厂家: Infineon    Infineon
描述:

Transistor Output SSR, 1-Channel, 4000V Isolation, LEAD FREE PACKAGE, DIP-6

输出元件 光电
文件: 总6页 (文件大小:271K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Series PVT412PbF  
Microelectronic Power IC  
HEXFET® Power MOSFET Photovoltaic Relay  
Single-Pole, Normally-Open, 0-400V, 140mA AC/DC  
General Description  
Features  
The PVT412 Series Photovoltaic Relay is a single-  
pole, normally open solid-state relay that can replace  
electromechanical relays in many applications. It  
utilizes International Rectifier’s proprietary HEXFET  
power MOSFET as the output switch, driven by an  
integrated circuit photovoltaic generator of novel  
construction. The output switch is controlled by  
radiation from a GaAlAs light emitting diode (LED)  
which is optically isolated from the photovoltaic  
generator.  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
HEXFET Power MOSFET output  
Bounce-free operation  
4,000 VRMS I/O isolation  
Load current limiting  
LinearAC/DC operation  
Solid-State Reliability  
UL recognized and BABT certified;  
ESD Tolerance:  
4000V Human Body Model  
500V Machine Model  
These SSRs are specifically designed for worldwide  
telecom applications. PVT412L employs an active  
current-limiting circuitry enabling it to pass FCC Part  
68 and other regulatory agency current surge  
requirements when overvoltage protection is  
provided. PVT412 does not employ the current-  
limiting circuitry and offers lower on-state resistance.  
Series PVT412 Relays are packaged in a 6-lead  
molded DIP package with either thru-hole or surface  
mount (‘gull-wing’) terminals. It is available in  
standard plastic shipping tubes or on tape-and-reel.  
Please refer to part identification information  
opposite.  
Part Identification  
Applications  
PVT412LPbF  
current limit, thru-hole  
PVT412LSPbF  
PVT412LS-TPbF  
current limit, surface-mount  
current limit, surface-mount,  
tape and reel  
no current limit, thru-hole  
no current limit, surface-mount  
no current limit, surface-mount  
tape and reel  
ƒ
ƒ
ƒ
ƒ
On/Off Hook switch  
Dial-Out relay  
Ring relay  
PVT412PbF  
PVT412SPbF  
PVT412S-TPbF  
General switching  
(HEXFET is the registered trademark for International Rectifier Power MOSFETs)  
www.irf.com © 2015 International Rectifier Submit Datasheet Feedback  
1
May 18, 2015  
Series PVT412PbF  
Electrical Specifications (-40°C T +85°C unless otherwise specified)  
A
INPUT CHARACTERISTICS  
Part Numbers  
Units  
PVT412L PVT412  
Minimum Control Current (see figures 1 and 2)  
3.0  
0.4  
mA  
mA  
mA  
Maximum Control Current for Off-State Resistance  
Control Current Range (Caution: current limit input LED, see figure 6)  
3.0 to 25  
6.0  
Maximum Reverse Voltage  
V
PVT412L PVT412  
OUTPUT CHARACTERISTICS  
Operating Voltage Range  
0 to ±400  
V
(DC or AC peak)  
Maximum Load Current @ TA=+40°C  
5mA Control (see figures1 and 2)  
A Connection  
120  
130  
200  
140  
150  
210  
mA (AC or DC)  
mA (DC)  
B Connection  
C Connection  
mA (DC)  
Maximum On-State Resistance @TA=+25°C  
For 50mA Pulsed Load, 5mA Control (see figure 4)  
A Connection  
35  
18  
9
27  
14  
7
B Connection  
C Connection  
µA  
Maximum Off-State Leakage @TA=+25°C, ±400V (see figure 5)  
Current Limit @TA=+25°C, For 5mA Control Current:  
Connection:  
1.0  
2.0  
A
C
Minimum  
Maximum  
130 260  
220 440  
yes  
n/a  
n/a  
yes  
mA  
mA  
Complies with FCC Part 68 Surge Requirements*  
Maximum Turn-On Time @TA=+25°C (see figure 7)  
For 50mA, 100 VDC load, 5mA Control  
ms  
Maximum Turn-Off Time @TA=+25°C (see figure 7)  
For 50mA, 100 VDC load, 5mA Control  
Maximum Thermal Offset Voltage @ 5mA Control  
0.5  
0.5  
ms  
µV  
Maximum Output Capacitance @ 50VDC  
12  
pF  
GENERAL CHARACTERISTICS  
ALL MODELS  
Minimum Dielectric Strength, Input-Output  
4000  
VRMS  
pF  
Minimum Insulation Resistance, Input-Output @TA=+25°C, 50%RH, 100VDC  
Maximum Capacitance, Input-Output  
1012  
1.0  
Maximum Pin Soldering Temperature (10 seconds maximum)  
+260  
Ambient Temperature Range:  
Operating  
Storage  
-40 to +85  
-40 to +100  
°C  
International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.  
Users of this International Rectifier product in such applications assume all risks of such use and indemnify International  
Rectifier against all damages resulting from such use.  
2
www.irf.com © 2015 International Rectifier  
Submit Datasheet Feedback  
May 18, 2015  
Series PVT412PbF  
Connection Diagrams  
I
A
A
LED=  
I
LED=  
I
I
LED=  
LED=  
Figure 1. Current Derating Curves*  
Figure 2. Current Derating Curves*  
*
Derating of ‘B’ and ‘C’ connection at +85°C will be 70% of that specified at +40°C and is linear from +40°C to +85°C.  
200  
PVT412  
150  
PVT412L  
100  
50  
1.0 2.0 3.0 4.0 5.0  
-5.0 -4.0 -3.0 -2.0 -1.0  
-50  
5 mA control  
@ 25°C pulsed  
-100  
-150  
-200  
Figure 4. Typical Normalized On-Resistance  
Figure 3. Linearity Characteristics  
3
www.irf.com © 2015 International Rectifier  
Submit Datasheet Feedback  
May 18, 2015  
Series PVT412PbF  
CAUTION: Provide  
current limiting so that  
25 mA max. steady-state  
control current rating  
is not exceeded.  
Figure 6. Input Characteristics (Current Controlled)  
Figure 5. Typical Normalized Off-State Leakage  
20  
10  
I
LED  
90%  
5
3
t
t
on  
t
dly  
off  
10%  
I
D
t
t
off  
dly  
t
on  
200  
Delay Time (microseconds)  
20  
100  
500 1000  
2000  
50  
Figure 8. Delay Time Definitions  
Figure 7. Typical Delay Times  
Figure 9. Typical Output Capacitance  
4
www.irf.com © 2015 International Rectifier  
Submit Datasheet Feedback  
May 18, 2015  
Series PVT412PbF  
Case Outlines  
01-2008 01  
01-2009 01  
Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/  
5
www.irf.com © 2015 International Rectifier  
Submit Datasheet Feedback  
May 18, 2015  
Series PVT412PbF  
Qualification information†  
Industrial  
Qualification level  
(per JEDEC JESD47I †† guidelines)  
PVT412LPbF  
PVT412PbF  
N/A  
Moisture Sensitivity  
Level  
PVT412LSPbF  
PVT412LS-TPbF  
PVT412SPbF  
PVT412S-TPbF  
MSL4  
(per JEDEC J-STD-020E & JEDEC J-STD-033C ††  
Yes  
)
RoHS compliant  
Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability  
†† Applicable version of JEDEC standard at the time of product release  
Revision History  
Date  
Comments  
Added Qualification Information Table on page 6  
Updated data sheet with new IR corporate template  
5/18/2015  
IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA  
Data and specifications subject to change without notice  
To contact International Rectifier, please visit http://www.irf.com/whoto-call/  
6
www.irf.com © 2015 International Rectifier  
Submit Datasheet Feedback  
May 18, 2015  

相关型号:

PVT412S

Microelectronic Power IC Relay Single Pole, Normally Open, 0-400V, 140mA AC/DC
INFINEON

PVT412S-T

Microelectronic Power IC Relay Single Pole, Normally Open, 0-400V, 140mA AC/DC
INFINEON

PVT412S-TPBF

Transistor Output SSR, 1-Channel, 4000V Isolation, LEAD FREE PACKAGE-6
INFINEON

PVT412SPBF

暂无描述
INFINEON

PVT422

Microelectronic Power IC Relay Dual Pole, Normally Open 0-400V, 120mA AC/DC
INFINEON

PVT422P

Microelectronic Power IC Relay Dual Pole, Normally Open 0-400V, 120mA AC/DC
INFINEON

PVT422P-TPBF

暂无描述
INFINEON

PVT422PBF

Transistor Output SSR, 2-Channel, 4000V Isolation, LEAD FREE, PLASTIC, DIP-8
INFINEON

PVT422PBF_08

Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Dual Pole, Normally Open
INFINEON

PVT422S

Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay
INFINEON

PVT422S-T

Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay
INFINEON