Q62703-Q2671 [INFINEON]
Plane MULTILED 3 mm T1 LED, Non Diffused; 飞机MULTILED 3毫米T1 LED,不扩散型号: | Q62703-Q2671 |
厂家: | Infineon |
描述: | Plane MULTILED 3 mm T1 LED, Non Diffused |
文件: | 总9页 (文件大小:540K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Plane MULTILED®
LSP P370, LOP P370
3 mm (T1) LED, Non Diffused
Besondere Merkmale
● farbloses, klares Gehäuse
● zur Einkopplung in Lichtleiter
● als optischer Indikator einsetzbar
● antiparallel geschaltete Leuchtdiodenchips
● hohe Signalwirkung durch Farbwechsel der LED möglich
● bei geeigneter Ansteuerung mit IC (z.B. SDA 2231),
Farbwechsel von grün über gelb bis orange (bzw. bis
super-rot) möglich
● Lötspieße mit Aufsetzebene
● gegurtet lieferbar
● Störimpulsfest nach DIN 40839
Features
● colorless, clear package
● for optical coupling into light pipes
● for use as optical indicator
● antiparallel chips
● high signal efficiency possible by color change of the LED
● with appropriate controlling by IC (e.g. SDA 2231) it is possible to change color from green to
yellow and orange (resp. to super-red)
● solder leads with stand-off
● available taped on reel
● load dump resistant acc. to DIN 40839
Semiconductor Group
0
11.96
LSP P370, LOP P370
Typ
Type
Emissionsfarbe Gehäusefarbe
Lichtstrom
Bestellnummer
Ordering Code
Color of
Color of
Package
Luminous Flux
IF = 15 mA
ΦV (mlm)
Emission
LSP P370-KN
LSP P370-M
LSP P370-N
LSP P370-P
LSP P370-MQ
super-red /
pure green
colorless clear
colorless clear
6.3 … 50
16.0 … 32
25.0 … 50
40.0 … 80
16.0 … 125
Q62703-Q2439
Q62703-Q2671
Q62703-Q2672
Q62703-Q3232
Q62703-Q2673
LOP P370-KN
LOP P370-M
LOP P370-N
LOP P370-MQ
orange /
pure green
6.3 … 50
16.0 … 32
25.0 … 50
16.0 … 125
Q62703-Q2530
Q62703-Q2674
Q62703-Q2675
Q62703-Q2676
Streuung des Lichtstromes in einer Verpackungseinheit ΦV max / ΦV min ≤ 2.0.1)
Streuung des Lichtstromes in einer LED ΦV max / ΦV min ≤ 4.0.
1)
Bei MULTILED® bestimmt die Helligkeit des jeweils dunkleren Chips in einem Gehäuse die Helligkeitsgruppe
der LED.
Luminous flux ratio in one packaging unit ΦV max / ΦV min ≤ 2.0.1)
Luminous flux ratio in one LED ΦV max / ΦV min ≤ 4.0.
1)
In case of MULTILED®, the brightness of the darker chip in one packaging unit determines the brightness
group of the LED.
Semiconductor Group
1
LSP P370, LOP P370
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
LS, LO
LP
Betriebstemperatur
Operating temperature range
Top
Tstg
Tj
– 55 ... + 100 – 55 ... + 100 ˚C
Lagertemperatur
Storage temperature range
– 55 ... + 100 – 55 ... + 100 ˚C
Sperrschichttemperatur
Junction temperature
+ 100
40 1)
0.5
+ 100
30 1)
0.5
˚C
mA
A
Durchlaßstrom
Forward current
IF
Stoßstrom
IFM
Surge current
t ≤ 10 µs, D = 0.005
Verlustleistung
Power dissipation
TA ≤ 25 °C
Ptot
140
400
100
400
mW
K/W
Wärmewiderstand
Thermal resistance
Sperrschicht / Luft
Junction / air
Rth JA
1)
Die angegebenen Grenzdaten gelten für den Chip, für den sie angegeben sind, unabhängig vom
Betriebszustand des anderen.
The stated maximum ratings refer to the specified chip, regardless of the other one’s operating status.
1)
Semiconductor Group
2
LSP P370, LOP P370
Kennwerte (TA = 25 ˚C)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
LS
LO
LP
Wellenlänge des emittierten Lichtes (typ.) λpeak
635
610
557
nm
nm
nm
Wavelength at peak emission
(typ.)
IF = 20 mA
Dominantwellenlänge
Dominant wavelength
IF = 20 mA
(typ.) λdom
(typ.)
628
45
605
40
560
22
Spektrale Bandbreite bei 50 % Φrel max (typ.) ∆λ
Spectral bandwidth at 50 % Φrel max
IF = 20 mA
(typ.)
Durchlaßspannung
Forward voltage
IF = 15 mA
(typ.) VF
(max.) VF
2.1
2.6
2.1
2.6
2.1
2.6
V
V
Kapazität 1)
Capacitance 1)
VR = 0 V, f = 1 MHz
(typ.) C0
12
8
15
pF
Schaltzeiten:
Switching times:
IV from 10 % to 90 %
IV from 90 % to 10 %
IF = 100 mA, tp = 10 µs, RL = 50 Ω
(typ.) tr
(typ.) tf
300
150
300
150
450
200
ns
ns
1)
Die Gesamtkapazität ergibt sich aus der Summe der Einzelkapazitäten.
The total capacitance results from the sum of the single capacitances.
1)
Semiconductor Group
3
LSP P370, LOP P370
Relative spektrale Emission Φrel = f (λ), TA = 25 ˚C, IF = 20 mA
Relative spectral emission
V (λ) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik Φrel = f (ϕ)
Radiation characteristic
Semiconductor Group
4
LSP P370, LOP P370
Durchlaßstrom IF = f (VF)
Forward current
TA = 25 ˚C
Relativer Lichtstrom ΦV / ΦV(15 mA) = f (IF)
Relative luminous flux
TA = 25 ˚C
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible pulse handling capability
Duty cycle D = parameter, TA = 25 ˚C
LS, LO
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible pulse handling capability
Duty cycle D = parameter, TA = 25 ˚C
LP
Semiconductor Group
5
LSP P370, LOP P370
Maximal zulässiger Durchlaßstrom
Max. permissible forward current
IF = f (TA), LS, LO
Maximal zulässiger Durchlaßstrom
Max. permissible forward current
IF = f (TA), LP
Wellenlänge der Stahlung λpeak = f (TA)
Wavelength at peak emission
IF = 20 mA
Dominantwellenlänge λdom = f (TA)
Dominant wavelength
IF = 20 mA
Semiconductor Group
6
LSP P370, LOP P370
Durchlaßspannung VF = f (TA)
Forward voltage
IF = 15 mA
Relativer Lichtstrom ΦV / ΦV(25 ˚C) = f (TA)
Relative luminous flux
IF = 15 mA
Semiconductor Group
7
LSP P370, LOP P370
Maßzeichnung
Package Outlines
(Maße in mm, wenn nicht anders angegeben)
(Dimensions in mm, unless otherwise specified)
Cathode mark, pure green: Long solder lead
Cathode mark, red, orange: Short solder lead
Semiconductor Group
8
相关型号:
©2020 ICPDF网 联系我们和版权申明