SAK-TC234L-24F200F AC [INFINEON]
SAK-TC234L-24F200F AC 属于第一代 Aurix TC23xL 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC23xL 系列属于第一代 TC2xx Aurix。TC23xL 系列产品配备 200 MHz TriCore、3.3V 单供电电压和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。;型号: | SAK-TC234L-24F200F AC |
厂家: | Infineon |
描述: | SAK-TC234L-24F200F AC 属于第一代 Aurix TC23xL 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC23xL 系列属于第一代 TC2xx Aurix。TC23xL 系列产品配备 200 MHz TriCore、3.3V 单供电电压和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。 |
文件: | 总238页 (文件大小:7810K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
32-Bit
Microcontroller
TC233 / TC234 / TC237
32-Bit Single-Chip Microcontroller
AC-Step
32-Bit Single-Chip Microcontroller
Data Sheet
V 1.0, 2017-03
Microcontrollers
Edition 2017-03
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2017 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com)
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
TC233 / TC234 / TC237
Revision History
Page or Item
Subjects (major changes since previous revision)
V 1.0, 2017-03
The history is documented in the last chapter
Data Sheet
3
V 1.0 2017-03
TC233 / TC234 / TC237
Trademarks of Infineon Technologies AG
AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, EconoPACK™, CoolMOS™, CoolSET™,
CORECONTROL™, CROSSAVE™, DAVE™, DI-POL™, EasyPIM™, EconoBRIDGE™, EconoDUAL™,
EconoPIM™, EconoPACK™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™,
ISOFACE™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™,
POWERCODE™; PRIMARION™, PrimePACK™, PrimeSTACK™, PRO-SIL™, PROFET™, RASIC™,
ReverSave™, SatRIC™, SIEGET™, SINDRION™, SIPMOS™, SmartLEWIS™, SOLID FLASH™, TEMPFET™,
thinQ!™, TRENCHSTOP™, TriCore™.
Other Trademarks
Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,
PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR
development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™,
FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG.
FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of
Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data
Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of
MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics
Corporation. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA
MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of
OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF
Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™
of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co.
TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™
of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas
Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes
Zetex Limited.
Last Trademarks Update 2011-11-11
Data Sheet
4
V 1.0 2017-03
TC233 / TC234 / TC237
Table of Contents
1
Summary of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2
2.1
Package and Pinning Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PG-LFBGA-292-6 Package Variant Pin Configuration of TC237x . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Port Functions and Pinning Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
How to Read the Following Port Function Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pull-Up/Pull-Down Reset Behavior of the Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
PG-TQFP-144-27 Package Variant Pin Configuration of TC23x-ADAS . . . . . . . . . . . . . . . . . . . . . . . 70
Port Functions and Pinning Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
How to Read the Following Port Function Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Pull-Up/Pull-Down Reset Behavior of the Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
PG-TQFP-100-23 Package Variant Pin Configuration of TC233x . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Port Functions and Pinning Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
How to Read the Following Port Function Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Pull-Up/Pull-Down Reset Behavior of the Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
2.1.1
2.1.1.1
2.1.1.2
2.1.2
2.2
2.2.1
2.2.1.1
2.2.1.2
2.2.2
2.3
2.3.1
2.3.1.1
2.3.1.2
2.3.2
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Parameter Interpretation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Pin Reliability in Overload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
3.3 V Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
VADC Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
MHz Oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Back-up Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Temperature Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Power Supply Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Calculating the 1.3 V Current Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Power-up and Power-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Single Supply mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
External Supply mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Reset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
EVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Phase Locked Loop (PLL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
ERAY Phase Locked Loop (ERAY_PLL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
AC Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
JTAG Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
DAP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
ASCLIN SPI Master Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
QSPI Timings, Master and Slave Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Ethernet Interface (ETH) Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
ETH Measurement Reference Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
ETH Management Signal Parameters (ETH_MDC, ETH_MDIO) . . . . . . . . . . . . . . . . . . . . . . . . . 218
ETH MII Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
ETH RMII Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
E-Ray Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Flash Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
3.8
3.9
3.10
3.10.1
3.11
3.11.1
3.11.2
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
3.21
3.21.1
3.21.2
3.21.3
3.21.4
3.22
3.23
Data Sheet
TOC-1
V 1.0, 2017-03
TC233 / TC234 / TC237
3.24
3.24.1
3.25
Package Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Package Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Quality Declarations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
4
History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
4.1
Changes from Version TC23x_DS_v1.1 to Version TC23xAC_DS_v1.0 . . . . . . . . . . . . . . . . . . . . . 231
Data Sheet
2
V 1.0 2017-03
TC233 / TC234 / TC237
Summary of Features
1
Summary of Features
The TC23x product family has the following features:
•
•
High Performance Microcontroller with one CPU core
Power Efficient scalar TriCore CPU (TC1.6E), having the following features:
–
–
–
–
–
–
Binary code compatibility with TC1.6P
up to 200 MHz operation at full temperature range
up to 184 Kbyte Data Scratch-Pad RAM (DSPR)
up to 8 Kbyte Instruction Scratch-Pad RAM (PSPR)
8 Kbyte Instruction Cache (ICACHE)
4 line read buffer (DRB)
•
•
Lockstepped shadow core for TC1.6E
Multiple on-chip memories
–
–
–
–
–
–
All embedded NVM and SRAM are ECC protected
up to 2 Mbyte Program Flash Memory (PFLASH)
up to 128 Kbyte Data Flash Memory (DFLASH) usable for EEPROM emulation
32 Kbyte Memory (LMU)
512 Kbyte Memory (EMEM)
BootROM (BROM)
•
•
•
16-Channel DMA Controller with safe data transfer
Sophisticated interrupt system (ECC protected)
High performance on-chip bus structure
–
–
–
64-bit Cross Bar Interconnect (SRI) giving fast parallel access between bus masters, CPUs and memories
32-bit System Peripheral Bus (SPB) for on-chip peripheral and functional units
One bus bridge (SFI Bridge)
•
•
•
•
•
Optional Hardware Security Module (HSM) on some variants (See below)
Safety Management Unit (SMU) handling safety monitor alarms
Memory Test Unit with ECC, Memory Initialization and MBIST functions (MTU)
Hardware I/O Monitor (IOM) for checking of digital I/O
Versatile On-chip Peripheral Units
–
Two Asynchronous/Synchronous Serial Channels (ASCLIN) with hardware LIN support (V1.3, V2.0, V2.1
and J2602) up to 50 MBaud
–
–
Four Queued SPI Interface Channels (QSPI) with master and slave capability up to 50 Mbit/s
Two MultiCAN+ Module with 3CAN nodes each and 128 free assignable message objects for high
efficiency data handling via FIFO buffering and gateway data transfer
–
–
–
4 Single Edge Nibble Transmission (SENT) channels for connection to sensors
One FlexRayTM module with 2 channels (E-Ray) supporting V2.1
One Generic Timer Module (GTM) providing a powerful set of digital signal filtering and timer functionality
to realize autonomous and complex Input/Output management
–
–
–
One Capture / Compare 6 module (Two kernels CCU60 and CCU61)
One General Purpose 12 Timer Unit (GPT120)
IEEE802.3 Ethernet MAC with RMII and MII interfaces (ETH)
•
Versatile Successive Approximation ADC (VADC)
Data Sheet
1-1
V 1.0 2017-03
TC233 / TC234 / TC237
Summary of Features
–
–
Cluster of 4 independent ADC kernels
Input voltage range from 0 V to 5.5V (ADC supply)
•
•
•
•
•
•
Digital programmable I/O ports
On-chip debug support for OCDS Level 1 (CPUs, DMA, On Chip Buses)
Four/five wire JTAG (IEEE 1149.1) or DAP (Device Access Port) interface
Power Management System and on-chip regulators
Clock Generation Unit with System PLL and Flexray PLL
Embedded Voltage Regulator
Data Sheet
1-2
V 1.0 2017-03
TC233 / TC234 / TC237
Summary of Features
Ordering Information
The ordering code for Infineon microcontrollers provides an exact reference to the required product. This ordering
code identifies:
•
•
The derivative itself, i.e. its function set, the temperature range, and the supply voltage
The package and the type of delivery.
For the available ordering codes for the TC233 / TC234 / TC237 please refer to the
"AURIX™ TC2x Data Sheet Addendum", which summarizes all available variants.
Table 1-1 Overview of TC23x Functions
Feature
TC1.6E
CPU Core
Type
1 /
1
E Cores / Checker Cores
200 MHz
yes
Max. Freq.
FPU
2 Mbyte
Program Flash
Data Flash
Cache
Size
128 Kbyte
Size
8 Kbyte
Instruction
Data
4 line read buffer
184 Kbyte / 8 Kbyte 1)
SRAM
Size TC1.6E
(DSPR/PSPR)
0 Kbyte
Size EMEM
Size LMU
Channels
Channels
Converter
TIM
0 Kbyte
16
DMA
ADC
12+12
2
1
GTM
2
TOM
2
DTM
1 / 1
1
CMU / ICM
TBU
1
Timer
GPT12
1
CCU6
1
STM
Modules
Modules
Channels
Modules
Nodes per Module
Message Objects
CAN FD
Channels
1
FlexRay
2
2
CAN
3
128
yes
4
QSPI
Data Sheet
1-3
V 1.0 2017-03
TC233 / TC234 / TC237
Summary of Features
Table 1-1 Overview of TC23x Functions (cont’d)
Feature
2
ASCLIN
SENT
Interfaces
Channels
Channels
Level
4
0
Ethernet
ASIL
up to ASIL-D
1
1
Safety support
SMU
IOM
0
FFT
2
HSIC
Channels
1
Security
HSM
Yes
Yes
Yes
Embedded Voltage Regulator
Embedded Voltage Regulator
Low Power Feature
Packages
DCDC from 3.3 V to 1.3 V
LDO from 3.3 V to 1.3 V
Standby RAM
Type
PG-TQFP-100-23 / PG-TQFP-144-
27 / PG-LFBGA-292-6
3.3 V CMOS (5V input supported on ADC
pins)
I/O
Type
−40 … +125°C / +150°C
Tambient
Range
1) To ensure the processor cores are provided with a constant stream of instructions the Instruction Fetch Units will
speculatively fetch instructions from the up to 64 bytes ahead of the current PC.
If the current PC is within 64 bytes of the top of an instruction memory the Instruction Fetch Unit may attempt to
speculatively fetch instruction from beyond the physical range. This may then lead to error conditions and alarms being
triggered by the bus and memory systems.
It is therefore recommended that the upper 64 bytes of any memory be unused for instruction storage.
Data Sheet
1-4
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
2
Package and Pinning Definitions
This chapter gives a pinning of the different packages of the TC233 / TC234 / TC237.
2.1
PG-LFBGA-292-6 Package Variant Pin Configuration of TC237x
Figure 2-1 is showing the TC237x pinout for the package variant: PG-LFBGA-292-6.
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
AN 1/P AN 3/P
40.1 40.3
AN 9/P AN 10/
40.9 P40.10
Y
W
V
U
T
VS S
NC VC AP1 VC AP0 NC P33.11 P33.9 P33.7 P33.5 P33.3 P33.1
VAGND
VAREF
VDDM
VS SM
NC
Y
W
V
U
T
AN 0/P AN 2/P AN 4/P AN 5/P AN 6/P AN 7/P AN 8/P
AN 11/
P40.11
VDDP3
NC
VS S
VDDP3
P23.1
NC
NC
NC P33.12 P33.10 P33.8 P33.6 P33.4 P33.2 P33.0
NC
40.0
40.2
40.4
40.5
40.6
40.7
40.8
AN 12/ AN 13/
P41.0 P41.1
AN 14/ AN 15/
P41.2 P41.3
NC
VS S
NC
NC
NC
NC
NC
NC
NC
NC
NC
VS S
NC
NC
NC
NC
NC
NC
P34.3 P34.1 P34.0
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
VS S
NC
NC
NC
P34.2 VDDP3
NC
NC
NC
AN 17/ AN 16/
P41.5 P41.4
R
P
P22.2 P22.3
P22.0 P22.1
NC
NC
R
P
AN 18/ AN 19/
P41.6 P41.7
P22.4
NC
VDD
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VDD
NC
AN 21/ AN 20/
P41.9 P41.8
N
M
L
VDDP3
VDD
VDD
VS S
VS S
NC
VS S
VDD
VDD
VS S
VS S
VS S
VS S
VDD
NC
N
M
L
AN 23/ AN 22/
P41.11 P41.10
XTAL1 XTAL2
NC
VS S
VS S
VS S
VS S
VS S
VS S
VS S
VS S
NC
VS S
TRST
NC
VS S
VS S
VS S
VS S
NC
P00.12 NC
P00.9 P00.7
P00.5 P00.4
P00.3 P00.2
P00.1 P00.0
P02.7 P02.8
P02.5 P02.6
P02.3 P02.4
P02.1 P02.2
TMS/D
AP 1
K
P21.4 P21.2
P21.5 P21.3
P00.8
P00.6
NC
K
TCK/D
AP 0
J
J
P20.2
P20.0
P21.6 P21.7
/TDI/TDO/DAP2
H
G
F
VS S
VS S
VS S
VS S
H
G
F
/TESTMODE
P20.3
NC
PORST ESR1
P20.6 ESR0
VDD
VDD
NC
P20.8 P20.7
P20.11 P20.10
P20.13 P20.12
P20.14 P15.2
NC
E
P20.9
VS S
VS S
VDDP3 P15.5 P14.2
NC
NC
NC
NC
NC
NC
NC
NC
NC
P11.8
NC
NC
NC
NC
E
D
C
B
A
VDDP3 P15.7 P15.8 P14.7
P11.6
VDDP3
VS S
D
C
B
A
P14.0
/Boo tload
P15.0
VS S
VDDP3 P15.3
P14.4 P14.3 P14.6 P13.0 P13.2 P11.3 P11.10 P11.12 P10.1
NC
P10.5
NC
VDDP3
VS S
P02.0
P14.1
/Boo tload
VS S
20
VDDP3 P15.1 P15.4 P15.6
P14.5 P14.8 P13.1 P13.3 P11.2 P11.9 P11.11 NC
P10.3 P10.2 P10.6
NC
3
VDDP3
2
NC
1
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
TC23x ‐ (top view)
Figure 2-1 TC237x Pinout for the package variant PG-LFBGA-292-6.
Data Sheet
2-5
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
2.1.1
Port Functions and Pinning Tables
2.1.1.1
How to Read the Following Port Function Tables
Some hints for interpreting the following tables.
Column “Ctrl.”:
I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXXB)
AI = Analog input
O = Output
O0 = Output with IOCR bit field selection PCx = 1X000B
O1 = Output with IOCR bit field selection PCx = 1X001B (ALT1)
O2 = Output with IOCR bit field selection PCx = 1X010B (ALT2)
O3 = Output with IOCR bit field selection PCx = 1X011B (ALT3)
O4 = Output with IOCR bit field selection PCx = 1X100B (ALT4)
O5 = Output with IOCR bit field selection PCx = 1X101B (ALT5)
O6 = Output with IOCR bit field selection PCx = 1X110B (ALT6)
O7 = Output with IOCR bit field selection PCx = 1X111B (ALT7)
Table 2-1 Example Port Table
Ball
Symbol
Ctrl.
Buffer
Type
Function
G10
Pxx.y
I
A1/HighZ/ General-purpose input
VDDP3
TIMm_n
GTM_TIN
TOMa_b
O1
GTM_TOUT
TOMc_d
GTM_TOUT
IOM_REFv_w
ASCLINz_RTS
IOM reference input
ASCLIN0 output (aka ARTSz)
O2
To each input several functions can be connected. The peripherals’ configuration defines if this input is used.
The port module (see corresponding chapter) decides which of the 8 output signals O0 to O7 drives the pad.
Some Ox rows list more than one function, e.g. several GTM_TOUT outputs and IOM reference inputs. The GTM
module (see corresponding chapter) has its own sub-multiplexer structure that defines which of the GTM sub-units
drives this signal. Additionally the IOM modules “listens” on these output signals (see IOM chapter).
Some pin symbol names were changed in this AURIX device compared to other AURIX devices to improve naming
systematics. The previously used symbol name is documented in the “Function” column with the text “(aka …)”1).
Column “Type”:
IN = Input only
A1 = Pad class A1 (3.3V)
A1+ = Pad class A1+ (3.3V)
S = ADC with digital input. Pad class D for analog input “AI”, pad class S for digital input “I”.
1) “aka” as abbreviation for “also known as”.
Data Sheet
2-6
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
PU = with pull-up device connected during reset (PORST = 0)
PD = with pull-down device connected during reset (PORST = 0)
High-Z = High-Z during reset (PORST = 0)
2.1.1.2
Tables
Port function and pinning tables.
Table 2-2 Port 00 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
G1
P00.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
CCU61_CTRAPA
CCU60_T12HRE
P00.0
CCU61 input
CCU60 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM reference input
ASCLIN0 output (aka: ASCLK0)
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
TOM1_4
IOM_REF0_9
ASCLIN0_SCLK
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
O2
O3
O4
O5
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
—
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-7
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-2 Port 00 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
G2
P00.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
ASCLIN0_RXC
CAN1_RXDD
SENT_SENT0B
CCU60_CC60INB
CCU61_CC60INA
P00.1
ASCLIN0 input (aka: ARX0C)
CAN node 1 input (aka: RXDCAN1D)
SENT input
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_1
GTM_TOUT
TOM0_4N
TOM1_4N
IOM_REF0_10
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
SENT_SPC0
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
SENT output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-8
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-2 Port 00 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
H1
P00.2
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
SENT_SENT1B
P00.2
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_1
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM reference input
ASCLIN0 output (aka: ASCLK0)
Reserved
TOM1_5
IOM_REF0_11
ASCLIN0_SCLK
—
O2
O3
O4
O5
O6
O7
—
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
P00.3
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
SENT input
H2
I
A1 /
HighZ /
VDDP3
SENT_SENT2B
CCU60_CC61INB
CCU61_CC61INA
CAN11_RXDA
CAN12_RXDA
P00.3
CCU60 input
CCU61 input
CAN1 node 1 input (aka: RXDCAN11A)
CAN1 node 2 input (aka: RXDCAN12A)
General-purpose output
GTM_TOUT
O0
O1
TOM0_10
TOM1_2
GTM_TOUT
TOM0_5N
TOM1_5N
IOM_REF0_12
—
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
SENT_SPC2
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SENT output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-9
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-2 Port 00 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
J1
P00.4
I
A1 /
HighZ /
VDDP3
General-purpose input
SCU input
SCU_REQ7
SENT_SENT3B
P00.4
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_11
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM1_6
IOM_REF0_13
—
O2
O3
O4
O5
O6
O7
CAN10_TXD
—
CAN1 node 0 output (aka: TXDCAN10)
Reserved
VADC_G1BFL0
SENT_SPC3
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
P00.5
VADC output
SENT output
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
CCU60 input
J2
I
A1 /
HighZ /
VDDP3
CCU60_CC62INB
CCU61_CC62INA
CAN10_RXDG
P00.5
CCU61 input
CAN1 node 0 input (aka: RXDCAN10G)
General-purpose output
GTM_TOUT
O0
O1
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
Reserved
TOM0_6N
TOM1_6N
IOM_REF0_14
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_G1BFL1
—
VADC output
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-10
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-2 Port 00 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
J4
P00.6
I
A1 /
HighZ /
VDDP3
General-purpose input
CAN1 node 1 input (aka: RXDCAN11G)
General-purpose output
GTM_TOUT
CAN11_RXDG
P00.6
O0
O1
TOM0_13
TOM1_5
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
Reserved
TOM0_7
TOM1_7
IOM_REF0_15
—
O2
O3
O4
O5
O6
O7
VADC_G1BFL2
—
VADC output
Reserved
VADC_EMUX10
—
VADC output
Reserved
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
P00.7
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
CCU61 input
K1
I
A1 /
HighZ /
VDDP3
CCU61_CC60INC
CCU61_CCPOS0A
CCU60_T12HRB
GPT120_T2INA
P00.7
CCU61 input
CCU60 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_14
TOM1_6
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
CAN1 node 1 output (aka: TXDCAN11)
VADC output
TOM0_7N
TOM1_7N
CAN11_TXD
VADC_G1BFL3
—
O2
O3
O4
O5
O6
O7
Reserved
VADC_EMUX11
—
VADC output
Reserved
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-11
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-2 Port 00 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
K4
P00.8
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU61 input
CCU61_CC61INC
CCU61_CCPOS1A
CCU60_T13HRB
GPT120_T2EUDA
CAN12_RXDG
P00.8
CCU61 input
CCU60 input
GPT120 input
CAN1 node 2 input (aka: RXDCAN12G)
General-purpose output
GTM_TOUT
O0
O1
TOM0_15
TOM1_7
GTM_TOUT (= DTM5_OUT7)
QSPI3 output (aka: SLSO36)
Reserved
QSPI3_SLSO6
—
O2
O3
O4
O5
O6
O7
—
Reserved
VADC_EMUX12
—
VADC output
Reserved
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
P00.9
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
K2
I
A1 /
HighZ /
VDDP3
TIM0_0
CCU61_CC62INC
CCU61_CCPOS2A
CCU60_T13HRC
CCU60_T12HRC
GPT120_T4EUDA
P00.9
CCU61 input
CCU61 input
CCU60 input
CCU60 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
QSPI3_SLSO7
ASCLIN0_RTS
—
O2
O3
O4
O5
O6
O7
QSPI3 output (aka: SLSO37)
ASCLIN0 output (aka: ARTS0)
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-12
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-2 Port 00 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
L2
P00.12
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
ASCLIN0_CTSA
ASCLIN0 input (aka: ACTS0A)
General-purpose output
GTM_TOUT
P00.12
O0
O1
TOM0_3
TOM1_3
GTM_TOUT
—
O2
O3
O4
O5
O6
O7
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-13
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
B1
P02.0
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SCU_REQ6
CCU60_CC60INA
CCU61_CC60INB
P02.0
SCU input
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_8
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM reference input
Reserved
TOM1_4
IOM_REF0_0
—
O2
O3
O4
O5
QSPI3_SLSO1
—
QSPI3 output (aka: SLSO31)
Reserved
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
ERAY0_TXDA
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-14
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
C2
P02.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
CAN0_RXDA
ERAY0_RXDA2
SCU_REQ14
P02.1
CAN node 0 input (aka: RXDCAN0A)
ERAY0 input
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_9
GTM_TOUT
TOM0_4N
TOM1_4N
IOM_REF0_1
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO2
—
QSPI3 output (aka: SLSO32)
Reserved
—
Reserved
—
Reserved
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-15
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
C1
P02.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
CCU60_CC61INA
CCU61_CC61INB
P02.2
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_10
TOM1_10
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM reference input
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI3 output (aka: SLSO33)
Reserved
TOM1_5
IOM_REF0_2
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI3_SLSO3
—
O2
O3
O4
O5
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
ERAY0_TXDB
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-16
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
D2
P02.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
ASCLIN1_RXG
CAN2_RXDB
ERAY0_RXDB2
P02.3
ASCLIN1 input (aka: ARX1G)
CAN node 2 input (aka: RXDCAN2B)
ERAY0 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_11
TOM1_11
TOM0_5N
TOM1_5N
IOM_REF0_3
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO4
—
QSPI3 output (aka: SLSO34)
Reserved
—
Reserved
—
Reserved
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-17
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
D1
P02.4
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
QSPI3_SLSIA
CAN0_RXDD
CCU60_CC62INA
CCU61_CC62INB
P02.4
QSPI3 input (aka: SLSI3A)
CAN node 0 input (aka: RXDCAN0D)
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_12
TOM1_12
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM1_6
IOM_REF0_4
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO0
—
QSPI3 output (aka: SLSO30)
Reserved
CAN10_TXD
ERAY0_TXENA
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CAN1 node 0 output (aka: TXDCAN10)
ERAY0 output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-18
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
E2
P02.5
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_5
QSPI3_MRSTA
SENT_SENT3C
P02.5
QSPI3 input (aka: MRST3A)
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_13
TOM1_13
GTM_TOUT
TOM0_6N
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
TOM1_6N
IOM_REF0_5
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
QSPI3_MRST
IOM_MON2_3
IOM_REF2_3
—
O2
O3
IOM reference input
QSPI3 output (aka: MRST3)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
CAN11_TXD
ERAY0_TXENB
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
CAN1 node 1 output (aka: TXDCAN11)
ERAY0 output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-19
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
E1
P02.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
QSPI3_MTSRA
SENT_SENT2C
CCU60_CC60INC
CCU60_CCPOS0A
CCU61_T12HRB
GPT120_T3INA
CAN10_RXDF
P02.6
QSPI3 input (aka: MTSR3A)
SENT input
CCU60 input
CCU60 input
CCU61 input
GPT120 input
CAN1 node 0 input (aka: RXDCAN10F)
General-purpose output
GTM_TOUT
O0
O1
TOM0_14
TOM1_14
GTM_TOUT
TOM0_7
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
Reserved
TOM1_7
IOM_REF0_6
—
O2
O3
O4
O5
O6
O7
QSPI3_MTSR
—
QSPI3 output (aka: MTSR3)
Reserved
VADC_EMUX00
—
VADC output
Reserved
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-20
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
F2
P02.7
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
QSPI3_SCLKA
SENT_SENT1C
CCU60_CC61INC
CCU60_CCPOS1A
CCU61_T13HRB
GPT120_T3EUDA
CAN11_RXDF
PMU_FDEST
P02.7
QSPI3 input (aka: SCLK3A)
SENT input
CCU60 input
CCU60 input
CCU61 input
GPT120 input
CAN1 node 1 input (aka: RXDCAN11F)
PMU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_15
TOM1_15
GTM_TOUT
TOM0_7N
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM reference input
Reserved
TOM1_7N
IOM_REF0_7
—
O2
O3
O4
O5
O6
O7
QSPI3_SCLK
—
QSPI3 output (aka: SCLK3)
Reserved
VADC_EMUX01
SENT_SPC1
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
VADC output
SENT output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-21
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-3 Port 02 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
F1
P02.8
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SENT_SENT0C
CCU60_CC62INC
CCU60_CCPOS2A
CCU61_T12HRC
CCU61_T13HRC
GPT120_T4INA
P02.8
SENT input
CCU60 input
CCU60 input
CCU61 input
CCU61 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
QSPI3 output (aka: SLSO35)
Reserved
TOM1_4N
IOM_REF0_8
QSPI3_SLSO5
—
O2
O3
O4
O5
O6
O7
—
Reserved
VADC_EMUX02
—
VADC output
Reserved
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-22
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-4 Port 10 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
B7
P10.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI1_MRSTA
GPT120_T5EUDB
P10.1
QSPI1 input (aka: MRST1A)
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_9
QSPI1_MTSR
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
—
GTM_TOUT
O2
O3
QSPI1 output (aka: MTSR1)
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
A5
P10.2
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
QSPI1_SCLKA
CAN2_RXDE
SCU_REQ2
GPT120_T6INB
P10.2
QSPI1 input (aka: SCLK1A)
CAN node 2 input (aka: RXDCAN2E)
SCU input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_10
IOM_MON2_9
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI1_SCLK
—
QSPI1 output (aka: SCLK1)
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-23
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-4 Port 10 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A6
P10.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI1_MTSRA
SCU_REQ3
GPT120_T5INB
P10.3
QSPI1 input (aka: MTSR1A)
SCU input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_11
IOM_MON2_10
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
QSPI1_MTSR
—
QSPI1 output (aka: MTSR1)
Reserved
—
Reserved
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
—
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
Reserved
O7
I
B5
P10.5
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
SCU_HWCFG4
CAN10_RXDA
P10.5
SCU input
CAN1 node 0 input (aka: RXDCAN10A)
General-purpose output
GTM_TOUT
O0
O1
TOM0_2
TOM1_10
IOM_REF2_9
—
GTM_TOUT
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO8
QSPI1_SLSO9
GPT120_T6OUT
—
QSPI3 output (aka: SLSO38)
QSPI1 output (aka: SLSO19)
GPT120 output
Reserved
—
Reserved
Data Sheet
2-24
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-4 Port 10 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A4
P10.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI3_MTSRB
SCU_HWCFG5
P10.6
QSPI3 input (aka: MTSR3B)
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_11
IOM_REF2_10
—
GTM_TOUT
IOM reference input
Reserved
O2
O3
O4
O5
O6
QSPI3_MTSR
GPT120_T3OUT
CAN10_TXD
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
—
QSPI3 output (aka: MTSR3)
GPT120 output
CAN1 node 0 output (aka: TXDCAN10)
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
Reserved
O7
Table 2-5 Port 11 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
A10
P11.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P11.2
O0
O1
TOM0_8
TOM1_1
GTM_TOUT
TOM0_4N
TOM1_4N
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
Reserved
O2
O3
O4
O5
QSPI0_SLSO5
QSPI1_SLSO5
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
—
QSPI0 output (aka: SLSO05)
QSPI1 output (aka: SLSO15)
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-25
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-5 Port 11 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B10
P11.3
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MRST1B)
General-purpose output
GTM_TOUT
QSPI1_MRSTB
P11.3
O0
O1
TOM0_10
TOM1_2
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
TOM1_5
—
O2
O3
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
ERAY0_TXDA
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
—
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
ERAY0 output
O4
O5
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
P11.6
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
QSPI1 input (aka: SCLK1B)
General-purpose output
GTM_TOUT
D9
I
A1+ /
HighZ /
VDDP3
QSPI1_SCLKB
P11.6
O0
O1
TOM0_11
TOM1_3
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
ERAY0 output
TOM1_5N
ERAY0_TXENB
QSPI1_SCLK
ERAY0_TXENA
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
—
O2
O3
O4
O5
QSPI1 output (aka: SCLK1)
ERAY0 output
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-26
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-5 Port 11 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
E7
P11.8
I
A1 /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MTSR1C)
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
QSPI1_MTSRC
P11.8
O0
O1
TOM0_4
TOM1_4
—
O2
O3
O4
O5
O6
O7
I
QSPI1_SLSO10
QSPI1_MTSR
—
QSPI1 output (aka: SLSO110)
QSPI1 output (aka: MTSR1)
Reserved
—
Reserved
—
Reserved
A9
P11.9
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MTSR1B)
ERAY0 input
QSPI1_MTSRB
ERAY0_RXDA1
P11.9
O0
O1
General-purpose output
GTM_TOUT
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
TOM0_6
TOM1_6
—
O2
O3
O4
O5
QSPI1_MTSR
—
QSPI1 output (aka: MTSR1)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
—
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-27
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-5 Port 11 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B9
P11.10
I
A1+ /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1E)
ERAY0 input
ASCLIN1_RXE
ERAY0_RXDB1
SCU_REQ12
CAN12_RXDD
P11.10
SCU input
CAN1 node 2 input (aka: RXDCAN12D)
General-purpose output
GTM_TOUT
O0
O1
TOM0_13
TOM1_5
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
TOM0_6N
TOM1_6N
—
O2
O3
O4
O5
QSPI0_SLSO3
QSPI1_SLSO3
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
—
QSPI0 output (aka: SLSO03)
QSPI1 output (aka: SLSO13)
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
P11.11
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
General-purpose output
GTM_TOUT
A8
I
A1+ /
HighZ /
VDDP3
P11.11
O0
O1
TOM0_14
TOM1_6
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
Reserved
TOM0_7N
TOM1_7N
—
O2
O3
O4
O5
QSPI0_SLSO4
QSPI1_SLSO4
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
ERAY0_TXENB
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
QSPI0 output (aka: SLSO04)
QSPI1 output (aka: SLSO14)
CCU61 output
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-28
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-5 Port 11 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B8
P11.12
I
A1+ /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P11.12
O0
O1
TOM0_15
TOM1_7
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
GTM output
TOM0_7
TOM1_7
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
GTM_CLK2
ERAY0_TXDB
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
SCU_EXTCLK1
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
O2
O3
O4
O5
ERAY0 output
CCU61 output
IOM monitor input
IOM reference input
SCU output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Table 2-6 Port 13 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
B12
P13.0
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CTRAPA
GPT120_T6EUDB
P13.0
GPT120 input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
TOM0_5
TOM1_5
TOM0_6N
TOM1_6N
—
O2
O3
O4
O5
O6
O7
QSPI2_SCLK
—
QSPI2 output (aka: SCLK2)
Reserved
—
Reserved
—
Reserved
CAN10_TXD
CAN1 node 0 output (aka: TXDCAN10)
Data Sheet
2-29
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-6 Port 13 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A12
P13.1
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS0C
GPT120_T3INB
GPT120 input
CAN10_RXDB
CAN1 node 0 input (aka: RXDCAN10B)
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
Reserved
P13.1
O0
O1
TOM0_6
TOM1_6
TOM0_7
TOM1_7
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
B11
P13.2
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS1C
GPT120_T3EUDB
GPT120 input
GPT120_CAPINA
GPT120 input
P13.2
TOM0_7
TOM1_7
TOM0_7N
TOM1_7N
CAN11_TXD
—
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
CAN1 node 1 output (aka: TXDCAN11)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-30
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-6 Port 13 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A11
P13.3
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS2C
GPT120_T4INB
GPT120 input
CAN11_RXDB
CAN1 node 1 input (aka: RXDCAN11B)
General-purpose output
GTM_TOUT
P13.3
O0
O1
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
TOM1_4
—
O2
O3
O4
O5
O6
O7
QSPI2_MTSR
QSPI2 output (aka: MTSR2)
Reserved
—
—
—
—
Reserved
Reserved
Reserved
Table 2-7 Port 14 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
B16
P14.0
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
P14.0
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
ASCLIN0 output (aka: ATX0)
IOM monitor input
TOM1_6
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
ERAY0_TXDA
ERAY0_TXDB
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
ASCLIN0_SCLK
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
O2
IOM reference input
ERAY0 output
O3
O4
O5
ERAY0 output
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
ASCLIN0 output (aka: ASCLK0)
CCU60 output
O6
O7
IOM monitor input
IOM reference input
Data Sheet
2-31
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-7 Port 14 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A15
P14.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
ASCLIN0_RXA
CAN1_RXDB
ERAY0_RXDA3
SCU_REQ15
ERAY0_RXDB3
SCU_EVRWUPA
P14.1
ASCLIN0 input (aka: ARX0A)
CAN node 1 input (aka: RXDCAN1B)
ERAY0 input
SCU input
ERAY0 input
AI
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
TOM0_4
TOM1_4
TOM0_7
TOM1_7
IOM_REF1_14
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-32
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-7 Port 14 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
E13
P14.2
I
A1 / PU / General-purpose input
VDDP3
TIM0_5
GTM_TIN
SCU_HWCFG2_EVR13
SCU input
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
Reserved
P14.2
O0
O1
TOM0_5
TOM1_5
TOM0_6N
TOM1_6N
IOM_REF1_15
—
O2
O3
O4
O5
O6
O7
I
QSPI2_SLSO1
QSPI2 output (aka: SLSO21)
Reserved
—
—
Reserved
—
Reserved
—
Reserved
B14
P14.3
A1 / PU / General-purpose input
VDDP3
TIM0_6
GTM_TIN
SCU_REQ10
SCU input
SCU_HWCFG3_BMI
SCU input
P14.3
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM0_6
TOM1_6
IOM_REF2_4
—
O2
O3
O4
O5
O6
O7
QSPI2_SLSO3
QSPI2 output (aka: SLSO23)
ASCLIN1 output (aka: ASLSO1)
Reserved
ASCLIN1_SLSO
—
—
—
Reserved
Reserved
Data Sheet
2-33
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-7 Port 14 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B15
P14.4
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
P14.4
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM reference input
Reserved
TOM0_7
TOM1_7
TOM0_7N
TOM1_7N
IOM_REF2_8
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
A14
P14.5
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
P14.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
IOM_REF2_11
IOM reference input
Reserved
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
ERAY0_TXDB
—
ERAY0 output
Reserved
Data Sheet
2-34
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-7 Port 14 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B13
P14.6
I
A1+ / PU / General-purpose input
VDDP3
TIM0_1
GTM_TIN
SCU_HWCFG0_DCLD
O
SCU input
QSPI0_MRSTD
QSPI0 input (aka: MRST0D)
General-purpose output
GTM_TOUT
P14.6
O0
O1
TOM0_1
TOM1_1
GTM_TOUT
IOM_REF2_14
IOM reference input
Reserved
—
O2
O3
O4
O5
O6
O7
I
QSPI2_SLSO2
QSPI2 output (aka: SLSO22)
Reserved
—
—
Reserved
ERAY0_TXENB
ERAY0 output
—
Reserved
D13
P14.7
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
ERAY0_RXDB0
ERAY0 input
P14.7
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
IOM_REF2_15
IOM reference input
ASCLIN0 output (aka: ARTS0)
QSPI2 output (aka: SLSO24)
Reserved
ASCLIN0_RTS
O2
O3
O4
O5
O6
O7
QSPI2_SLSO4
—
—
—
—
Reserved
Reserved
Reserved
Data Sheet
2-35
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-7 Port 14 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A13
P14.8
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1D)
CAN node 2 input (aka: RXDCAN2D)
ERAY0 input
ASCLIN1_RXD
CAN2_RXDD
ERAY0_RXDA0
P14.8
O0
O1
O2
O3
O4
O5
O6
O7
General-purpose output
GTM_TOUT
TOM0_2
—
—
—
—
—
—
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Table 2-8 Port 15 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
B20
P15.0
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P15.0
O0
O1
TOM1_3
TOM0_11
TOM0_7N
TOM1_7N
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI0_SLSO13
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
ASCLIN1 output (aka: ATX1)
IOM monitor input
O2
IOM reference input
O3
O4
O5
QSPI0 output (aka: SLSO013)
Reserved
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
ASCLIN1_SCLK
—
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
O6
O7
ASCLIN1 output (aka: ASCLK1)
Reserved
Data Sheet
2-36
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-8 Port 15 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
A18
P15.1
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1A)
QSPI2 input (aka: SLSI2B)
CAN node 2 input (aka: RXDCAN2A)
SCU input
ASCLIN1_RXA
QSPI2_SLSIB
CAN2_RXDA
SCU_REQ16
SCU_EVRWUPB
P15.1
AI
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT
TOM1_4
TOM0_12
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
ASCLIN1 output (aka: ATX1)
IOM monitor input
TOM1_4
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_SLSO5
—
O2
IOM reference input
O3
O4
O5
O6
O7
I
QSPI2 output (aka: SLSO25)
Reserved
—
Reserved
—
Reserved
—
Reserved
C19
P15.2
A1 /
HighZ /
VDDP3
General-purpose input
QSPI2 input (aka: MRST2E)
QSPI2 input (aka: SLSI2A)
QSPI2 input (aka: HSIC2INA)
General-purpose output
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT
QSPI2_MRSTE
QSPI2_SLSIA
QSPI2_HSICINA
P15.2
O0
O1
TOM1_5
TOM0_13
TOM0_4N
TOM1_4N
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
QSPI2_SLSO0
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
ASCLIN0 output (aka: ATX0)
IOM monitor input
O2
IOM reference input
O3
O4
O5
QSPI2 output (aka: SLSO20)
Reserved
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
ASCLIN0_SCLK
—
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
O6
O7
ASCLIN0 output (aka: ASCLK0)
Reserved
Data Sheet
2-37
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-8 Port 15 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B17
P15.3
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN0 input (aka: ARX0B)
QSPI2 input (aka: SCLK2A)
QSPI2 input (aka: HSIC2INB)
CAN node 1 input (aka: RXDCAN1A)
General-purpose output
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT
ASCLIN0_RXB
QSPI2_SCLKA
QSPI2_HSICINB
CAN1_RXDA
P15.3
O0
O1
TOM1_6
TOM0_14
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
ASCLIN0 output (aka: ATX0)
IOM monitor input
TOM1_5
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
QSPI2_SCLK
—
O2
IOM reference input
QSPI2 output (aka: SCLK2)
Reserved
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
A17
P15.4
A1 /
HighZ /
VDDP3
General-purpose input
QSPI2 input (aka: MRST2A)
SCU input
QSPI2_MRSTA
SCU_REQ0
P15.4
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT
TOM1_7
TOM0_15
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_MRST
IOM_MON2_2
IOM_REF2_2
—
O2
O3
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI2 output (aka: MRST2)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-38
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-8 Port 15 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
E14
P15.5
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1B)
QSPI2 input (aka: MTSR2A)
SCU input
ASCLIN1_RXB
QSPI2_MTSRA
SCU_REQ13
P15.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
TOM0_5N
TOM1_5N
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_MTSR
—
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI2 output (aka: MTSR2)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
P15.6
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
A16
I
A1 /
HighZ /
VDDP3
TIM0_0
QSPI2_MTSRB
P15.6
QSPI2 input (aka: MTSR2B)
General-purpose output
GTM_TOUT
O0
O1
TOM0_0
TOM1_0
GTM_TOUT
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI2_MTSR
—
QSPI2 output (aka: MTSR2)
Reserved
QSPI2_SCLK
—
QSPI2 output (aka: SCLK2)
Reserved
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-39
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-8 Port 15 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
D15
P15.7
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI2_MRSTB
P15.7
QSPI2 input (aka: MRST2B)
General-purpose output
GTM_TOUT
O0
O1
TOM0_1
TOM1_1
—
GTM_TOUT
O2
O3
Reserved
QSPI2_MRST
IOM_MON2_2
IOM_REF2_2
—
QSPI2 output (aka: MRST2)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
P15.8
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
D14
I
A1 /
HighZ /
VDDP3
TIM0_2
QSPI2_SCLKB
SCU_REQ1
P15.8
QSPI2 input (aka: SCLK2B)
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
—
GTM_TOUT
O2
O3
O4
O5
O6
O7
Reserved
QSPI2_SCLK
—
QSPI2 output (aka: SCLK2)
Reserved
—
Reserved
—
Reserved
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-40
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-9 Port 20 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
H20
P20.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
SCU_REQ9
OCDS_TGI0
GPT120_T6EUDA
CAN11_RXDC
CAN12_RXDC
P20.0
SCU input
OCDS input
GPT120 input
CAN1 node 1 input (aka: RXDCAN11C)
CAN1 node 2 input (aka: RXDCAN12C)
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
O0
O1
TOM0_6
TOM1_6
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
OCDS_TGO0
P20.2
OCDS
H19
G20
I
InputOnly General-purpose input
/ PU /
VDDP3
TESTMODE
Factory Test Mode Enable
P20.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
GPT120_T6INA
P20.3
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM1_12
TOM0_4
IOM_MON1_14
—
GTM_TOUT (= DTM1_OUT4)
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI0_SLSO9
QSPI2_SLSO9
CAN12_TXD
—
QSPI0 output (aka: SLSO09)
QSPI2 output (aka: SLSO29)
CAN1 node 2 output (aka: TXDCAN12)
Reserved
—
Reserved
Data Sheet
2-41
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-9 Port 20 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
F17
P20.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
P20.6
O0
O1
General-purpose output
GTM_TOUT
TOM1_10
TOM0_10
IOM_MON1_15
ASCLIN1_RTS
QSPI0_SLSO8
QSPI2_SLSO8
—
GTM_TOUT
IOM monitor input
ASCLIN1 output (aka: ARTS1)
QSPI0 output (aka: SLSO08)
QSPI2 output (aka: SLSO28)
Reserved
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
F19
P20.7
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
ASCLIN1_CTSA
CAN0_RXDB
P20.7
ASCLIN1 input (aka: ACTS1A)
CAN node 0 input (aka: RXDCAN0B)
General-purpose output
GTM_TOUT
O0
O1
TOM1_11
TOM0_11
IOM_MON2_4
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-42
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-9 Port 20 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
F20
P20.8
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
P20.8
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM monitor input
TOM1_7
TOM0_7
TOM0_4
TOM1_4
IOM_MON2_8
ASCLIN1_SLSO
QSPI0_SLSO0
QSPI1_SLSO0
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
SCU_WDT0LCK
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
P20.9
O2
O3
O4
O5
ASCLIN1 output (aka: ASLSO1)
QSPI0 output (aka: SLSO00)
QSPI1 output (aka: SLSO10)
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
SCU output
O6
O7
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
ASCLIN1 input (aka: ARX1C)
QSPI0 input (aka: SLSI0B)
SCU input
E17
I
A1 /
HighZ /
VDDP3
ASCLIN1_RXC
QSPI0_SLSIB
SCU_REQ11
CAN12_RXDE
P20.9
CAN1 node 2 input (aka: RXDCAN12E)
General-purpose output
GTM_TOUT
O0
O1
TOM1_13
TOM0_13
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM monitor input
TOM1_4N
IOM_MON2_11
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SLSO1
QSPI1_SLSO1
—
QSPI0 output (aka: SLSO01)
QSPI1 output (aka: SLSO11)
Reserved
SCU_WDTSLCK
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SCU output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-43
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-9 Port 20 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
E19
P20.10
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P20.10
O0
O1
TOM1_14
TOM0_14
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
TOM1_5
IOM_MON2_14
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI0_SLSO6
QSPI2_SLSO7
CAN12_TXD
ASCLIN1_SCLK
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
P20.11
O2
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI0 output (aka: SLSO06)
QSPI2 output (aka: SLSO27)
CAN1 node 2 output (aka: TXDCAN12)
ASCLIN1 output (aka: ASCLK1)
CCU61 output
O3
O4
O5
O6
O7
IOM monitor input
IOM reference input
General-purpose input
QSPI0 input (aka: SCLK0A)
General-purpose output
GTM_TOUT
E20
I
A1+ /
HighZ /
VDDP3
QSPI0_SCLKA
P20.11
O0
O1
TOM1_15
TOM0_15
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM monitor input
TOM1_5N
IOM_MON2_15
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SCLK
—
QSPI0 output (aka: SCLK0)
Reserved
CAN11_TXD
—
CAN1 node 1 output (aka: TXDCAN11)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-44
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-9 Port 20 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
D19
P20.12
I
A1 /
HighZ /
VDDP3
General-purpose input
QSPI0 input (aka: MRST0A)
CAN1 node 1 input (aka: RXDCAN11H)
IOM pad input
QSPI0_MRSTA
CAN11_RXDH
IOM_PIN13
P20.12
O0
O1
General-purpose output
GTM_TOUT
TOM1_0
TOM0_8
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
TOM1_6
IOM_MON0_13
—
O2
O3
Reserved
QSPI0_MRST
IOM_MON2_0
IOM_REF2_0
QSPI0_MTSR
—
QSPI0 output (aka: MRST0)
IOM monitor input
IOM reference input
QSPI0 output (aka: MTSR0)
Reserved
O4
O5
O6
O7
—
Reserved
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
P20.13
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
QSPI0 input (aka: SLSI0A)
CAN1 node 2 input (aka: RXDCAN12H)
IOM pad input
D20
I
A1+ /
HighZ /
VDDP3
QSPI0_SLSIA
CAN12_RXDH
IOM_PIN14
P20.13
O0
O1
General-purpose output
GTM_TOUT
TOM1_1
TOM0_9
GTM_TOUT
TOM0_6N
TOM1_6N
IOM_MON0_14
—
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM monitor input
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SLSO2
QSPI1_SLSO2
QSPI0_SCLK
—
QSPI0 output (aka: SLSO02)
QSPI1 output (aka: SLSO12)
QSPI0 output (aka: SCLK0)
Reserved
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-45
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-9 Port 20 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
C20
P20.14
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI0 input (aka: MTSR0A)
IOM pad input
QSPI0_MTSRA
IOM_PIN15
P20.14
O0
O1
General-purpose output
GTM_TOUT
TOM1_2
TOM0_10
TOM0_7
TOM1_7
IOM_MON0_15
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI0_MTSR
—
QSPI0 output (aka: MTSR0)
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
—
Reserved
Table 2-10 Port 21 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
K19
P21.2
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SCU_EMGSTOPB
SCU input
P21.2
TOM0_0
TOM1_0
TOM0_4
TOM1_4
—
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-46
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-10 Port 21 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
J19
P21.3
TIM0_1
P21.3
TOM0_1
TOM1_1
TOM0_4N
TOM1_4N
—
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
Reserved
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
K20
P21.4
TIM0_2
P21.4
TOM0_2
TOM1_2
TOM0_5
TOM1_5
—
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-47
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-10 Port 21 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
J20
P21.5
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
P21.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
Reserved
TOM1_5N
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
H17
P21.6
A1 / PU / General-purpose input
VDDP3
TIM0_4
GTM_TIN
TDI
OCDS input
OCDS_TGI2
OCDS input
GPT120_T5EUDA
GPT120 input
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
P21.6
O0
O1
TOM0_4
TOM1_4
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
GPT120_T3OUT
OCDS_TGO2
GPT120 output
OCDS
Data Sheet
2-48
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-10 Port 21 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
H16
P21.7
I
A1+ / PU / General-purpose input
VDDP3
TIM0_5
OCDS_DAP2
OCDS_TGI3
GPT120_T5INA
P21.7
GTM_TIN
OCDS input
OCDS input
GPT120 input
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
O0
O1
TOM0_5
TOM1_5
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
GPT120_T6OUT
OCDS_TGO3
OCDS_DAP2
TDO
GPT120 output
OCDS
O
OCDS Output
JTAG Output
O
Table 2-11 Port 22 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
P20
P22.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI3_MTSRE
QSPI3 input (aka: MTSR3E)
General-purpose output
GTM_TOUT
P22.0
O0
O1
TOM0_9
TOM1_1
GTM_TOUT
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI3_MTSR
QSPI3 output (aka: MTSR3)
Reserved
—
—
—
—
Reserved
Reserved
Reserved
Data Sheet
2-49
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-11 Port 22 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
P19
P22.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
QSPI3_MRSTE
P22.1
QSPI3 input (aka: MRST3E)
General-purpose output
GTM_TOUT
O0
O1
TOM0_8
TOM1_0
TOM0_6
TOM1_6
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
O2
O3
QSPI3_MRST
IOM_MON2_3
IOM_REF2_3
—
QSPI3 output (aka: MRST3)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
R20
P22.2
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI3_SLSID
P22.2
QSPI3 input (aka: SLSI3D)
General-purpose output
GTM_TOUT
O0
O1
TOM0_11
TOM1_3
TOM0_6N
TOM1_6N
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO12
—
QSPI3 output (aka: SLSO312)
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-50
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-11 Port 22 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
R19
P22.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
QSPI3_SCLKE
QSPI3 input (aka: SCLK3E)
General-purpose output
GTM_TOUT
P22.3
O0
O1
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
Reserved
TOM0_7
TOM1_7
—
O2
O3
O4
O5
O6
O7
I
QSPI3_SCLK
QSPI3 output (aka: SCLK3)
Reserved
—
—
Reserved
—
Reserved
—
Reserved
P16
P22.4
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
Reserved
P22.4
O0
O1
TOM0_7N
TOM1_7N
—
O2
O3
O4
O5
O6
O7
—
Reserved
QSPI0_SLSO12
QSPI0 output (aka: SLSO012)
Reserved
—
—
—
Reserved
Reserved
Data Sheet
2-51
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-12 Port 23 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
U19
P23.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
P23.1
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT
TOM0_6
TOM0_15
ASCLIN1_RTS
QSPI3_SLSO13
GTM_CLK0
SCU_EXTCLK1
SCU_EXTCLK0
—
O2
O3
O4
O5
O6
O7
ASCLIN1 output (aka: ARTS1)
QSPI3 output (aka: SLSO313)
GTM output
SCU output
SCU output
Reserved
Table 2-13 Port 33 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
W10
P33.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
IOM_PIN0
IOM pad input
P33.0
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM monitor input
Reserved
TOM0_4
TOM1_4
IOM_MON0_0
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
VADC_G1BFL0
—
VADC output
Reserved
Data Sheet
2-52
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y10
P33.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_5
IOM_PIN1
P33.1
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
Reserved
TOM0_5
TOM1_5
IOM_MON0_1
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
VADC_EMUX02
VADC_G1BFL1
—
VADC output
VADC output
Reserved
W11
P33.2
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
IOM_PIN2
P33.2
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
Reserved
TOM0_6
TOM1_6
IOM_MON0_2
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_EMUX01
VADC_G1BFL2
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-53
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y11
P33.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
IOM_PIN3
P33.3
IOM pad input
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
O0
O1
TOM0_7
TOM1_7
IOM_MON0_3
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_EMUX00
VADC_G1BFL3
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
P33.4
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
W12
I
A1 /
HighZ /
VDDP3
TIM0_0
CCU61_CTRAPC
IOM_PIN4
P33.4
CCU61 input
IOM pad input
General-purpose output
GTM_TOUT
O0
O1
TOM0_0
TOM1_0
IOM_MON0_4
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_EMUX12
VADC_G0BFL0
—
VADC output
VADC output
Reserved
Data Sheet
2-54
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y12
P33.5
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
CCU61_CCPOS2C
GPT120_T4EUDB
IOM_PIN5
CCU61 input
GPT120 input
IOM pad input
P33.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_1
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
QSPI0 output (aka: SLSO07)
QSPI1 output (aka: SLSO17)
Reserved
TOM1_5
IOM_MON0_5
QSPI0_SLSO7
QSPI1_SLSO7
—
O2
O3
O4
O5
O6
O7
VADC_EMUX11
VADC_G0BFL1
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-55
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
W13
P33.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
ASCLIN1_RXF
CCU61_CCPOS1C
GPT120_T2EUDB
CAN10_RXDH
IOM_PIN6
ASCLIN1 input (aka: ARX1F)
CCU61 input
GPT120 input
CAN1 node 0 input (aka: RXDCAN10H)
IOM pad input
P33.6
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM monitor input
Reserved
TOM1_5N
IOM_MON0_6
—
O2
O3
O4
—
Reserved
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
VADC_EMUX10
VADC_G0BFL2
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
HSM_HSM1
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
VADC output
O5
O6
O7
VADC output
CCU61 output
IOM monitor input
IOM reference input
HSM output
O
Data Sheet
2-56
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y13
P33.7
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
CAN0_RXDE
SCU_REQ8
CCU61_CCPOS0C
GPT120_T2INB
IOM_PIN7
P33.7
CAN node 0 input (aka: RXDCAN0E)
SCU input
CCU61 input
GPT120 input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
Reserved
TOM1_6
IOM_MON0_7
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO7
—
QSPI3 output (aka: SLSO37)
Reserved
CAN10_TXD
VADC_G0BFL3
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
HSM_HSM2
CAN1 node 0 output (aka: TXDCAN10)
VADC output
CCU61 output
IOM monitor input
IOM reference input
HSM output
O
Data Sheet
2-57
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
W14
P33.8
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
SCU_EMGSTOPA
IOM_PIN8
P33.8
SCU input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM monitor input
Reserved
TOM0_4
TOM1_4
TOM0_6N
TOM1_6N
IOM_MON0_8
—
O2
O3
O4
O5
QSPI3_SLSO2
—
QSPI3 output (aka: SLSO32)
Reserved
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
—
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
SMU_FSP
CCU61 output
IOM monitor input
IOM reference input
SMU
O
Data Sheet
2-58
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y14
P33.9
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI3_HSICINA
IOM_PIN9
P33.9
QSPI3 input (aka: HSIC3INA)
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_1
GTM_TOUT
TOM0_7
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
TOM1_7
IOM_MON0_9
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO1
—
QSPI3 output (aka: SLSO31)
Reserved
—
Reserved
—
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
P33.10
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
W15
I
A1+ /
HighZ /
VDDP3
TIM0_0
QSPI3_SLSIC
QSPI3_HSICINB
IOM_PIN10
P33.10
QSPI3 input (aka: SLSI3C)
QSPI3 input (aka: HSIC3INB)
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
TOM0_7N
TOM1_7N
IOM_MON0_10
QSPI1_SLSO6
QSPI3_SLSO11
ASCLIN1_SLSO
GTM_CLK1
SCU_EXTCLK1
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM monitor input
QSPI1 output (aka: SLSO16)
QSPI3 output (aka: SLSO311)
ASCLIN1 output (aka: ASLSO1)
GTM output
O2
O3
O4
O5
O6
O7
SCU output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-59
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-13 Port 33 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y15
P33.11
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
QSPI3_SCLKD
SCU_REQ17
IOM_PIN11
P33.11
QSPI3 input (aka: SCLK3D)
SCU input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
GTM_TOUT
IOM_MON0_11
ASCLIN1_SCLK
QSPI3_SCLK
—
IOM monitor input
ASCLIN1 output (aka: ASCLK1)
QSPI3 output (aka: SCLK3)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
SMPS_DCDCSYNC
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SMPS_DCDCSYNC
P33.12
SCU output
CCU61 output
IOM monitor input
IOM reference input
SCU output
O
I
W16
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
QSPI3_MTSRD
IOM_PIN12
P33.12
QSPI3 input (aka: MTSR3D)
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM1_12
TOM0_12
GTM_TOUT
IOM_MON0_12
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI3_MTSR
ASCLIN1_SCLK
—
IOM monitor input
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI3 output (aka: MTSR3)
ASCLIN1 output (aka: ASCLK1)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-60
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-14 Port 34 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
U10
P34.0
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P34.0
O0
O1
O2
O3
O4
O5
O6
O7
I
TOM1_12
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
U11
P34.1
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P34.1
O0
O1
O2
TOM1_13
ASCLIN0_TX
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
IOM_MON2_12
IOM_REF2_12
—
O3
O4
CAN0_TXD
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
Reserved
IOM_MON2_5
IOM_REF2_5
—
O5
O6
O7
I
—
Reserved
—
Reserved
T12
P34.2
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN0 input (aka: ARX0D)
CAN node 0 input (aka: RXDCAN0G)
General-purpose output
GTM_TOUT
ASCLIN0_RXD
CAN0_RXDG
P34.2
O0
O1
O2
O3
O4
O5
O6
O7
TOM1_14
—
—
—
—
—
—
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Data Sheet
2-61
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-14 Port 34 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
U12
P34.3
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ACTS1B)
General-purpose output
GTM_TOUT
ASCLIN1_CTSB
P34.3
O0
O1
O2
O3
O4
O5
O6
O7
TOM1_15
—
Reserved
—
Reserved
QSPI2_SLSO10
QSPI2 output (aka: SLSO210)
Reserved
—
—
—
Reserved
Reserved
Table 2-15 Port 40 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
W9
P40.0
I
S / VDDM General-purpose input
VADC input channel 0 of group 0
S / VDDM General-purpose input
VADC input channel 1 of group 0
VADCG0_0
P40.1
AI
I
Y9
VADCG0_1
AI
(with multiplexer diagnostics)
W8
P40.2
I
S / VDDM General-purpose input
VADCG0_2
AI
VADC input channel 2 of group 0
(with multiplexer diagnostics)
Y8
P40.3
I
S / VDDM General-purpose input
VADC input channel 3 of group 0
S / VDDM General-purpose input
VADC input channel 4 of group 0
S / VDDM General-purpose input
VADC input channel 5 of group 0
S / VDDM General-purpose input
VADC input channel 6 of group 0
S / VDDM General-purpose input
VADCG0_3
P40.4
AI
I
W7
W6
W5
W4
VADCG0_4
P40.5
AI
I
VADCG0_5
P40.6
AI
I
VADCG0_6
P40.7
AI
I
VADCG0_7
AI
VADC input channel 7 of group 0
(with pull down diagnostics)
W3
Y3
P40.8
I
S / VDDM General-purpose input
VADC input channel 8 of group 0
S / VDDM General-purpose input
VADCG0_8
P40.9
AI
I
VADCG0_9
AI
VADC input channel 9 of group 0
(with multiplexer diagnostics)
Data Sheet
2-62
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-15 Port 40 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
Y2
P40.10
I
S / VDDM General-purpose input
VADC input channel 10 of group 0
VADCG0_10
AI
(with multiplexer diagnostics)
S / VDDM General-purpose input
SENT input
W1
P40.11
I
SENT_SENT0A
CCU60_CCPOS0D
VADCG0_11
CCU60 input
AI
VADC input channel 11 of group 0
Table 2-16 Port 41 Functions
Ball
Symbol
Ctrl. Buffer
Type
Function
V2
P41.0
I
S / VDDM General-purpose input
SENT input
SENT_SENT1A
CCU60_CCPOS1B
VADCG1_0
P41.1
CCU60 input
AI
I
VADC input channel 0 of group 1
S / VDDM General-purpose input
VADC input channel 1 of group 1
(with multiplexer diagnostics)
S / VDDM General-purpose input
SENT input
V1
U2
VADCG1_1
AI
P41.2
I
SENT_SENT2A
CCU61_CCPOS1B
VADCG1_2
CCU61 input
AI
I
VADC input channel 2 of group 1
(with multiplexer diagnostics)
U1
P41.3
S / VDDM General-purpose input
SENT input
SENT_SENT3A
CCU61_CCPOS1D
VADCG1_3
CCU61 input
AI
VADC input channel 3 of group 1
(with pull down diagnostics)
R1
R2
P2
P1
N1
P41.4
I
S / VDDM General-purpose input
VADC input channel 4 of group 1
S / VDDM General-purpose input
VADC input channel 5 of group 1
S / VDDM General-purpose input
VADC input channel 6 of group 1
S / VDDM General-purpose input
VADC input channel 7 of group 1
S / VDDM General-purpose input
VADC input channel 8 of group 1
VADCG1_4
P41.5
AI
I
VADCG1_5
P41.6
AI
I
VADCG1_6
P41.7
AI
I
VADCG1_7
P41.8
AI
I
VADCG1_8
AI
Data Sheet
2-63
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-16 Port 41 Functions (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
N2
P41.9
I
S / VDDM General-purpose input
VADC input channel 9 of group 1
VADCG1_9
AI
(with multiplexer diagnostics)
M1
M2
P41.10
I
S / VDDM General-purpose input
VADCG1_10
AI
VADC input channel 10 of group 1
(with multiplexer diagnostics)
P41.11
I
S / VDDM General-purpose input
VADCG1_11
AI
VADC input channel 11 of group 1
Table 2-17 System I/O
Ball
Symbol
Ctrl. Buffer
Type
Function
M20
M19
K16
XTAL1
XTAL2
TMS/DAP1
DAP1
I
VDDP3
VDDP3
Main Oscillator/PLL/Clock Generator Input
Main Oscillator/PLL/Clock Generator Output
O
I
A1+ / PD / Debug Interface
VDDP3
I/O
I
Device Access Port LIne 1
L19
J16
TRST
InputOnly JTAG Module Reset/Enable Input
/ PD /
VDDP3
TCK/DAP0
DAP0
I
I
InputOnly OCDS input
/ PD /
VDDP3
Device Access Port LIne 0
G16
G17
ESR1
I/O
A1+ / PU / SCU input
VDDP3
EVRWUP
PORST
I
I
EVR Wakeup Pin
InputOnly Power On Reset
/ PD /
Additional strong PD in case of power fail.
VDDP3
F16
ESR0
I/O
I
A1+/OD / SCU input/output
VDDP3
EVRWUP
EVR Wakeup Pin
Table 2-18 Supply
Ball
Symbol
Ctrl. Buffer
Type
Function
Y7
Y6
VAGND
VAREF
I
I
—
—
Negative Analog Reference Voltage 0
Positive Analog Reference Voltage 0
Data Sheet
2-64
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-18 Supply (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
H7,
VDD
I
—
Digital Core Power Supply (1.3V)
G8,
P8,
N7,
P13,
N14,
H14,
G13
A2,
VDDP3
I
—
Digital I/O Power Supply (3.3V)
B3,
W20,
V19,
T11,
A19,
B18,
D16,
E15,
D5
Y4
Y5
VSSM
VDDM
I
I
I
—
—
—
Analog Ground for VDDM
ADC Power Supply (5.0V)
Digital Core Ground (0V)
M14, VSS
L14,
J14,
M13,
L13,
K13,
J13
P12,
N12,
L12,
K12,
H12,
G12
VSS
I
I
—
—
Digital Core Ground (0V)
Digital Core Ground (0V)
P11,
N11,
M11,
L11,
K11,
J11,
H11,
G11
VSS
Data Sheet
2-65
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-18 Supply (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
P10,
N10,
M10,
L10,
K10,
J10,
H10,
G10
VSS
I
—
Digital Core Ground (0V)
P9,
N9,
L9,K9,
H9, G9
VSS
I
I
—
—
Digital Core Ground (0V)
Digital Core Ground (0V)
M8,
VSS
L8,K8,
J8,
M7,
L7,K7,
J7
Y20,
W19,
U17,
T16,
A20,
B19,
D17,
E16,
B2,
VSS
I
—
Digital Core Ground (0V)
D4, E5
L20
VSS
VDD
I
I
—
—
Digital Core Ground (0V)
N19
Digital Core Power Supply (1.3V)
This pin supplies also the main XTAL Oscillator/PLL (1.3V).
A higher decoupling capacitor is therefore recommended to
the VSS pin for better noise immunity.
N20
VDDP3
I
—
Digital I/O Power Supply (3.3V)
This pin supplies also the main XTAL Oscillator/PLL (3.3V).
A higher decoupling capacitor is therefore recommended to
the VSS pin for better noise immunity.
Data Sheet
2-66
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-18 Supply (cont’d)
Ball Symbol
Ctrl. Buffer
Type
Function
A1,L1, NC
T1,
Y1,
I
—
Not connected
These pins are reserved for future extensions and shall not
be connected externally.
T2,
W2,
A3,
B4,
E4,
F4,
G4,
H4,
L4,
M4,
N4,
P4,
R4,
T4,
U4,
F5,
G5,
H5,J5,
K5,L5,
M5,
N5,
P5,
R5,
T5, U5
Data Sheet
2-67
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-18 Supply (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
B6,
NC
I
—
Not connected
D6,
E6,
These pins are reserved for future extensions and shall not
be connected externally.
T6,
U6,
A7,
D7,
T7,
U7,
D8,
E8,
T8,
U8,
E9,
T9,
U9,
D10,
E10,
T10,
D11,
E11,
D12,
E12,
T13,
U13,
K14,
T14,
U14
Data Sheet
2-68
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-LFBGA-292-6 Package Variant Pin
Table 2-18 Supply (cont’d)
Ball
Symbol
Ctrl. Buffer
Type
Function
T15,
U15,
L16,
M16,
N16,
R16,
U16,
Y16,
J17,
K17,
L17,
M17,
N17,
P17,
R17,
T17,
W17,
W18,
G19,
T19,
Y19,
T20,
U20,
V20
NC
I
—
Not connected
These pins are reserved for future extensions and shall not
be connected externally.
2.1.2
Pull-Up/Pull-Down Reset Behavior of the Pins
Table 2-19 List of Pull-Up/Pull-Down Reset Behavior of the Pins
Pins
PORST = 0
PORST = 1
all GPIOs
High-Z
TDI, TESTMODE
PORST1)
Pull-up
Pull-down with IPORST relevant
Pull-down with IPDLI relevant
TRST, TCK, TMS
ESR0
Pull-down
The open-drain driver is used to
drive low.2)
Pull-up3)
ESR1
Pull-up3)
Pull-up
Pull-up
P14.2, P14.3, P14.6
P21.7 / TDO
High-Z/Pull-up4)
1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation.
2) Valid additionally after deactivation of PORST until the internal reset phase has finished. See the SCU chapter for details.
3) See the SCU_IOCR register description.
4) Depends on JTAG/DAP selection with TRST.
Data Sheet
2-69
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
2.2
PG-TQFP-144-27 Package Variant Pin Configuration of TC23x-ADAS
Figure 2-1 is showing the TC23x pinout for the package variant: PG-TQFP-144-27.
P02.0
P02.1
1
2
3
4
5
6
7
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
P20.14
P20.13
P20.12
P20.11
P20.10
P20.9
P20.8
P20.7
P20.6
VDD
ESR0
PORST
ESR1
P20.3
P20.2/TESTMODE
P20.0
TCK/DAP0
TRST
P21.7/TDO/DAP2
TMS/DAP1
P21.6/TDI
P21.5
P21.4
P21.3
P21.2
VDDP 3
XTAL2
XTAL1
VS S
VDD
P22.4
P22.3
P22.2
P22.1
P22.0
P02.2
P02.3
P02.4
P02.5
P02.6
P02.7
P02.8
VDD/V DDS B
P00.0
P00.1
P00.2
P00.3
P00.4
P00.5
P00.6
P00.7
P00.8
P00.9
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
TC23x‐ADAS
(Top View)
P00.12
VDD
VDDP3
AN23/P41.11
AN22/P41.10
AN21/P41.9
AN20/P41.8
AN19/P41.7
AN18/P41.6
AN17/P41.5
AN16/P41.4
AN15/P41.3
AN14/P41.2
AN13/P41.1
AN12/P41.0
AN11/P40.11
P23.1
Figure 2-2 TC23x-ADAS Pinout for the package variant PG-TQFP-144-27.
Data Sheet
2-70
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
2.2.1
Port Functions and Pinning Tables
2.2.1.1
How to Read the Following Port Function Tables
Some hints for interpreting the following tables.
Column “Ctrl.”:
I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXXB)
AI = Analog input
O = Output
O0 = Output with IOCR bit field selection PCx = 1X000B
O1 = Output with IOCR bit field selection PCx = 1X001B (ALT1)
O2 = Output with IOCR bit field selection PCx = 1X010B (ALT2)
O3 = Output with IOCR bit field selection PCx = 1X011B (ALT3)
O4 = Output with IOCR bit field selection PCx = 1X100B (ALT4)
O5 = Output with IOCR bit field selection PCx = 1X101B (ALT5)
O6 = Output with IOCR bit field selection PCx = 1X110B (ALT6)
O7 = Output with IOCR bit field selection PCx = 1X111B (ALT7)
Table 2-20 Example Port Table
Pin
Symbol
Ctrl.
Buffer
Type
Function
10
Pxx.y
I
A1/ HighZ/ General-purpose input
VDDP3
TIMm_n
TOMa_b
TOMc_d
IOM_REFv_w
GTM_TIN
O1
GTM_TOUT
GTM_TOUT
IOM reference input
To each input several functions can be connected. The peripherals’ configuration defines if this input is used.
The port module (see corresponding chapter) decides which of the 8 output signals O0 to O7 drives the pad.
Some Ox rows list more than one function, e.g. several GTM_TOUT and IOM reference inputs. The GTM module
(see corresponding chapter) has its own sub-multiplexer structure that defines which of the GTM sub-units drives
this signal. Additionally the IOM modules “listens” on these output signals (see IOM chapter).
Column “Type”:
IN = Input only
A1 = Pad class A1 (3.3V)
A1+ = Pad class A1+ (3.3V)
S = ADC with digital input. Pad class D for analog input “AI”, pad class S for digital input “I”.
PU = with pull-up device connected during reset (PORST = 0)
PD = with pull-down device connected during reset (PORST = 0)
High-Z = High-Z during reset (PORST = 0)
Vx = Supply (the Exposed Pad is also considered as VSS and shall be connected to ground)
2.2.1.2
Tables
Port function and pinning tables.
Data Sheet
2-71
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
11
P00.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
CCU61_CTRAPA
CCU60_T12HRE
ETH0_MDIOA
P00.0
CCU61 input
CCU60 input
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM reference input
ASCLIN0 output (aka: ASCLK0)
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
TOM1_4
IOM_REF0_9
ASCLIN0_SCLK
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
O2
O3
O4
O5
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
—
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
ETH0_MDIO
CCU60 output
IOM monitor input
IOM reference input
Ethernet output
O
Data Sheet
2-72
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
12
P00.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
ASCLIN0_RXC
CAN1_RXDD
SENT_SENT0B
CCU60_CC60INB
CCU61_CC60INA
P00.1
ASCLIN0 input (aka: ARX0C)
CAN node 1 input (aka: RXDCAN1D)
SENT input
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_1
GTM_TOUT
TOM0_4N
TOM1_4N
IOM_REF0_10
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
SENT_SPC0
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
SENT output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-73
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
13
P00.2
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
SENT_SENT1B
P00.2
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_1
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM reference input
ASCLIN0 output (aka: ASCLK0)
Reserved
TOM1_5
IOM_REF0_11
ASCLIN0_SCLK
—
O2
O3
O4
O5
O6
O7
—
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
P00.3
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
SENT input
14
I
A1 /
HighZ /
VDDP3
SENT_SENT2B
CCU60_CC61INB
CCU61_CC61INA
CAN11_RXDA
CAN12_RXDA
P00.3
CCU60 input
CCU61 input
CAN1 node 1 input (aka: RXDCAN11A)
CAN1 node 2 input (aka: RXDCAN12A)
General-purpose output
GTM_TOUT
O0
O1
TOM0_10
TOM1_2
GTM_TOUT
TOM0_5N
TOM1_5N
IOM_REF0_12
—
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
SENT_SPC2
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SENT output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-74
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
15
P00.4
I
A1 /
HighZ /
VDDP3
General-purpose input
SCU input
SCU_REQ7
SENT_SENT3B
P00.4
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_11
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM1_6
IOM_REF0_13
—
O2
O3
O4
O5
O6
O7
CAN10_TXD
—
CAN1 node 0 output (aka: TXDCAN10)
Reserved
VADC_G1BFL0
SENT_SPC3
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
P00.5
VADC output
SENT output
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
CCU60 input
16
I
A1 /
HighZ /
VDDP3
CCU60_CC62INB
CCU61_CC62INA
CAN10_RXDG
P00.5
CCU61 input
CAN1 node 0 input (aka: RXDCAN10G)
General-purpose output
GTM_TOUT
O0
O1
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
Reserved
TOM0_6N
TOM1_6N
IOM_REF0_14
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_G1BFL1
—
VADC output
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-75
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
17
P00.6
I
A1 /
HighZ /
VDDP3
General-purpose input
CAN1 node 1 input (aka: RXDCAN11G)
General-purpose output
GTM_TOUT
CAN11_RXDG
P00.6
O0
O1
TOM0_13
TOM1_5
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
Reserved
TOM0_7
TOM1_7
IOM_REF0_15
—
O2
O3
O4
O5
O6
O7
VADC_G1BFL2
—
VADC output
Reserved
VADC_EMUX10
—
VADC output
Reserved
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
P00.7
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
CCU61 input
18
I
A1 /
HighZ /
VDDP3
CCU61_CC60INC
CCU61_CCPOS0A
CCU60_T12HRB
GPT120_T2INA
P00.7
CCU61 input
CCU60 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_14
TOM1_6
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
CAN1 node 1 output (aka: TXDCAN11)
VADC output
TOM0_7N
TOM1_7N
CAN11_TXD
VADC_G1BFL3
—
O2
O3
O4
O5
O6
O7
Reserved
VADC_EMUX11
—
VADC output
Reserved
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-76
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
19
P00.8
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU61 input
CCU61_CC61INC
CCU61_CCPOS1A
CCU60_T13HRB
GPT120_T2EUDA
CAN12_RXDG
P00.8
CCU61 input
CCU60 input
GPT120 input
CAN1 node 2 input (aka: RXDCAN12G)
General-purpose output
GTM_TOUT
O0
O1
TOM0_15
TOM1_7
GTM_TOUT (= DTM5_OUT7)
QSPI3 output (aka: SLSO36)
Reserved
QSPI3_SLSO6
—
O2
O3
O4
O5
O6
O7
—
Reserved
VADC_EMUX12
—
VADC output
Reserved
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
P00.9
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
20
I
A1 /
HighZ /
VDDP3
TIM0_0
CCU61_CC62INC
CCU61_CCPOS2A
CCU60_T13HRC
CCU60_T12HRC
GPT120_T4EUDA
P00.9
CCU61 input
CCU61 input
CCU60 input
CCU60 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
QSPI3_SLSO7
ASCLIN0_RTS
—
O2
O3
O4
O5
O6
O7
QSPI3 output (aka: SLSO37)
ASCLIN0 output (aka: ARTS0)
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-77
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-21 Port 00 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
21
P00.12
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
ASCLIN0_CTSA
ASCLIN0 input (aka: ACTS0A)
General-purpose output
GTM_TOUT
P00.12
O0
O1
TOM0_3
TOM1_3
GTM_TOUT
—
O2
O3
O4
O5
O6
O7
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-78
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
1
P02.0
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SCU_REQ6
CCU60_CC60INA
CCU61_CC60INB
P02.0
SCU input
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_8
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM reference input
Reserved
TOM1_4
IOM_REF0_0
—
O2
O3
O4
O5
QSPI3_SLSO1
—
QSPI3 output (aka: SLSO31)
Reserved
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
ERAY0_TXDA
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-79
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
2
P02.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
CAN0_RXDA
ERAY0_RXDA2
SCU_REQ14
P02.1
CAN node 0 input (aka: RXDCAN0A)
ERAY0 input
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_9
GTM_TOUT
TOM0_4N
TOM1_4N
IOM_REF0_1
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO2
—
QSPI3 output (aka: SLSO32)
Reserved
—
Reserved
—
Reserved
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-80
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
3
P02.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
CCU60_CC61INA
CCU61_CC61INB
P02.2
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_10
TOM1_10
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM reference input
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI3 output (aka: SLSO33)
Reserved
TOM1_5
IOM_REF0_2
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI3_SLSO3
—
O2
O3
O4
O5
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
ERAY0_TXDB
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-81
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
4
P02.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
ASCLIN1_RXG
CAN2_RXDB
ERAY0_RXDB2
P02.3
ASCLIN1 input (aka: ARX1G)
CAN node 2 input (aka: RXDCAN2B)
ERAY0 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_11
TOM1_11
TOM0_5N
TOM1_5N
IOM_REF0_3
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO4
—
QSPI3 output (aka: SLSO34)
Reserved
—
Reserved
—
Reserved
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-82
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
5
P02.4
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
QSPI3_SLSIA
CAN0_RXDD
CCU60_CC62INA
CCU61_CC62INB
P02.4
QSPI3 input (aka: SLSI3A)
CAN node 0 input (aka: RXDCAN0D)
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_12
TOM1_12
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM1_6
IOM_REF0_4
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO0
—
QSPI3 output (aka: SLSO30)
Reserved
CAN10_TXD
ERAY0_TXENA
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CAN1 node 0 output (aka: TXDCAN10)
ERAY0 output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-83
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
6
P02.5
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_5
QSPI3_MRSTA
SENT_SENT3C
P02.5
QSPI3 input (aka: MRST3A)
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_13
TOM1_13
GTM_TOUT
TOM0_6N
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
TOM1_6N
IOM_REF0_5
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
QSPI3_MRST
IOM_MON2_3
IOM_REF2_3
—
O2
O3
IOM reference input
QSPI3 output (aka: MRST3)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
CAN11_TXD
ERAY0_TXENB
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
CAN1 node 1 output (aka: TXDCAN11)
ERAY0 output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-84
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
7
P02.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
QSPI3_MTSRA
SENT_SENT2C
CCU60_CC60INC
CCU60_CCPOS0A
CCU61_T12HRB
GPT120_T3INA
CAN10_RXDF
P02.6
QSPI3 input (aka: MTSR3A)
SENT input
CCU60 input
CCU60 input
CCU61 input
GPT120 input
CAN1 node 0 input (aka: RXDCAN10F)
General-purpose output
GTM_TOUT
O0
O1
TOM0_14
TOM1_14
GTM_TOUT
TOM0_7
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
Reserved
TOM1_7
IOM_REF0_6
—
O2
O3
O4
O5
O6
O7
QSPI3_MTSR
—
QSPI3 output (aka: MTSR3)
Reserved
VADC_EMUX00
—
VADC output
Reserved
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-85
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
8
P02.7
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
QSPI3_SCLKA
SENT_SENT1C
CCU60_CC61INC
CCU60_CCPOS1A
CCU61_T13HRB
GPT120_T3EUDA
CAN11_RXDF
PMU_FDEST
P02.7
QSPI3 input (aka: SCLK3A)
SENT input
CCU60 input
CCU60 input
CCU61 input
GPT120 input
CAN1 node 1 input (aka: RXDCAN11F)
PMU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_15
TOM1_15
GTM_TOUT
TOM0_7N
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM reference input
Reserved
TOM1_7N
IOM_REF0_7
—
O2
O3
O4
O5
O6
O7
QSPI3_SCLK
—
QSPI3 output (aka: SCLK3)
Reserved
VADC_EMUX01
SENT_SPC1
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
VADC output
SENT output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-86
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-22 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
9
P02.8
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SENT_SENT0C
CCU60_CC62INC
CCU60_CCPOS2A
CCU61_T12HRC
CCU61_T13HRC
GPT120_T4INA
P02.8
SENT input
CCU60 input
CCU60 input
CCU61 input
CCU61 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
QSPI3 output (aka: SLSO35)
Reserved
TOM1_4N
IOM_REF0_8
QSPI3_SLSO5
—
O2
O3
O4
O5
O6
O7
—
Reserved
VADC_EMUX02
ETH0_MDC
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
VADC output
Ethernet output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-87
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-23 Port 10 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
140
P10.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI1_MRSTA
GPT120_T5EUDB
ETH0_CRSC
P10.1
QSPI1 input (aka: MRST1A)
GPT120 input
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_9
QSPI1_MTSR
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
—
GTM_TOUT
O2
O3
QSPI1 output (aka: MTSR1)
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
141
P10.2
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
QSPI1_SCLKA
CAN2_RXDE
SCU_REQ2
GPT120_T6INB
ETH0_COLB
P10.2
QSPI1 input (aka: SCLK1A)
CAN node 2 input (aka: RXDCAN2E)
SCU input
GPT120 input
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_10
IOM_MON2_9
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI1_SCLK
—
QSPI1 output (aka: SCLK1)
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-88
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-23 Port 10 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
142
P10.3
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI1_MTSRA
SCU_REQ3
GPT120_T5INB
ETH0_RXERC
P10.3
QSPI1 input (aka: MTSR1A)
SCU input
GPT120 input
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_11
IOM_MON2_10
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
QSPI1_MTSR
—
QSPI1 output (aka: MTSR1)
Reserved
—
Reserved
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
—
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
Reserved
O7
I
143
P10.5
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
SCU_HWCFG4
CAN10_RXDA
ETH0_RXD3B
P10.5
SCU input
CAN1 node 0 input (aka: RXDCAN10A)
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_10
IOM_REF2_9
—
GTM_TOUT
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO8
QSPI1_SLSO9
GPT120_T6OUT
—
QSPI3 output (aka: SLSO38)
QSPI1 output (aka: SLSO19)
GPT120 output
Reserved
—
Reserved
Data Sheet
2-89
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-23 Port 10 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
144
P10.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI3_MTSRB
SCU_HWCFG5
P10.6
QSPI3 input (aka: MTSR3B)
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_11
IOM_REF2_10
—
GTM_TOUT
IOM reference input
Reserved
O2
O3
O4
O5
O6
QSPI3_MTSR
GPT120_T3OUT
CAN10_TXD
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
—
QSPI3 output (aka: MTSR3)
GPT120 output
CAN1 node 0 output (aka: TXDCAN10)
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
Reserved
O7
Table 2-24 Port 11 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
132
P11.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P11.2
O0
O1
TOM0_8
TOM1_1
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
Reserved
TOM1_4N
—
O2
O3
O4
O5
QSPI0_SLSO5
QSPI1_SLSO5
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
ETH0_TXD1
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
QSPI0 output (aka: SLSO05)
QSPI1 output (aka: SLSO15)
CCU61 output
IOM monitor input
IOM reference input
Ethernet output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-90
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-24 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
133
P11.3
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MRST1B)
General-purpose output
GTM_TOUT
QSPI1_MRSTB
P11.3
O0
O1
TOM0_10
TOM1_2
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
TOM1_5
—
O2
O3
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
ERAY0_TXDA
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
ETH0_TXD0
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
P11.6
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
ERAY0 output
O4
O5
CCU61 output
IOM monitor input
IOM reference input
Ethernet output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
QSPI1 input (aka: SCLK1B)
General-purpose output
GTM_TOUT
134
I
A1+ /
HighZ /
VDDP3
QSPI1_SCLKB
P11.6
O0
O1
TOM0_11
TOM1_3
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
ERAY0 output
TOM1_5N
ERAY0_TXENB
QSPI1_SCLK
ERAY0_TXENA
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
ETH0_TXEN
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
O2
O3
O4
O5
QSPI1 output (aka: SCLK1)
ERAY0 output
CCU61 output
IOM monitor input
IOM reference input
Ethernet output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-91
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-24 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
136
P11.8
I
A1 /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MTSR1C)
Ethernet input
QSPI1_MTSRC
ETH0_RXD2A
P11.8
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
TOM0_4
TOM1_4
—
O2
O3
O4
O5
O6
O7
I
QSPI1_SLSO10
QSPI1_MTSR
—
QSPI1 output (aka: SLSO110)
QSPI1 output (aka: MTSR1)
Reserved
—
Reserved
—
Reserved
135
P11.9
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MTSR1B)
ERAY0 input
QSPI1_MTSRB
ERAY0_RXDA1
ETH0_RXD1A
P11.9
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
TOM0_6
TOM1_6
—
O2
O3
O4
O5
QSPI1_MTSR
—
QSPI1 output (aka: MTSR1)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
—
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-92
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-24 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
137
P11.10
I
A1+ /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1E)
ERAY0 input
ASCLIN1_RXE
ERAY0_RXDB1
SCU_REQ12
CAN12_RXDD
ETH0_RXD0A
P11.10
SCU input
CAN1 node 2 input (aka: RXDCAN12D)
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_13
TOM1_5
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
TOM0_6N
TOM1_6N
—
O2
O3
O4
O5
QSPI0_SLSO3
QSPI1_SLSO3
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
—
QSPI0 output (aka: SLSO03)
QSPI1 output (aka: SLSO13)
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-93
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-24 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
138
P11.11
I
A1+ /
HighZ /
VDDP3
General-purpose input
Ethernet input
ETH0_RXDVA
ETH0_CRSDVA
ETH0_CRSB
P11.11
Ethernet input
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_14
TOM1_6
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
Reserved
TOM0_7N
TOM1_7N
—
O2
O3
O4
O5
QSPI0_SLSO4
QSPI1_SLSO4
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
ERAY0_TXENB
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
QSPI0 output (aka: SLSO04)
QSPI1 output (aka: SLSO14)
CCU61 output
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-94
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-24 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
139
P11.12
I
A1+ /
HighZ /
VDDP3
General-purpose input
Ethernet input
ETH0_REFCLK
ETH0_RXCLKA
ETH0_TXCLKB
P11.12
Ethernet input
Ethernet input
O0
O1
General-purpose output
GTM_TOUT
TOM0_15
TOM1_7
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
GTM output
TOM0_7
TOM1_7
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
GTM_CLK2
ERAY0_TXDB
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
SCU_EXTCLK1
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
O2
O3
O4
O5
ERAY0 output
CCU61 output
IOM monitor input
IOM reference input
SCU output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-95
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-25 Port 13 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
128
P13.0
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CTRAPA
GPT120_T6EUDB
P13.0
GPT120 input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
TOM0_5
TOM1_5
TOM0_6N
TOM1_6N
—
O2
O3
O4
O5
O6
O7
I
QSPI2_SCLK
—
QSPI2 output (aka: SCLK2)
Reserved
—
Reserved
ETH0_TXER
CAN10_TXD
P13.1
Ethernet output
CAN1 node 0 output (aka: TXDCAN10)
General-purpose input
CCU60 input
129
A1 /
HighZ /
VDDP3
CCU60_CCPOS0C
GPT120_T3INB
CAN10_RXDB
ETH0_TXCLKC
P13.1
GPT120 input
CAN1 node 0 input (aka: RXDCAN10B)
Ethernet input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
Reserved
TOM0_6
TOM1_6
TOM0_7
TOM1_7
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-96
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-25 Port 13 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
130
P13.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS1C
GPT120_T3EUDB
GPT120_CAPINA
P13.2
GPT120 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
CAN1 node 1 output (aka: TXDCAN11)
Reserved
TOM0_7
TOM1_7
TOM0_7N
TOM1_7N
CAN11_TXD
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
ETH0_TXD3
—
Ethernet output
Reserved
131
P13.3
A1+ /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS2C
GPT120_T4INB
CAN11_RXDB
P13.3
GPT120 input
CAN1 node 1 input (aka: RXDCAN11B)
General-purpose output
GTM_TOUT
O0
O1
TOM0_8
TOM1_0
TOM0_4
TOM1_4
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
O2
O3
O4
O5
O6
O7
QSPI2_MTSR
—
QSPI2 output (aka: MTSR2)
Reserved
—
Reserved
ETH0_TXD2
—
Ethernet output
Reserved
Data Sheet
2-97
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-26 Port 14 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
118
P14.0
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
P14.0
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
ASCLIN0 output (aka: ATX0)
IOM monitor input
TOM1_6
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
ERAY0_TXDA
ERAY0_TXDB
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
ASCLIN0_SCLK
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
O2
IOM reference input
ERAY0 output
O3
O4
O5
ERAY0 output
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
ASCLIN0 output (aka: ASCLK0)
CCU60 output
O6
O7
IOM monitor input
IOM reference input
Data Sheet
2-98
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-26 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
119
P14.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
ASCLIN0_RXA
CAN1_RXDB
ERAY0_RXDA3
SCU_REQ15
ERAY0_RXDB3
SCU_EVRWUPA
P14.1
ASCLIN0 input (aka: ARX0A)
CAN node 1 input (aka: RXDCAN1B)
ERAY0 input
SCU input
ERAY0 input
AI
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
TOM0_4
TOM1_4
TOM0_7
TOM1_7
IOM_REF1_14
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-99
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-26 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
120
P14.2
I
A1 / PU / General-purpose input
VDDP3
TIM0_5
GTM_TIN
SCU_HWCFG2_EVR13
SCU input
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
Reserved
P14.2
O0
O1
TOM0_5
TOM1_5
TOM0_6N
TOM1_6N
IOM_REF1_15
—
O2
O3
O4
O5
O6
O7
I
QSPI2_SLSO1
QSPI2 output (aka: SLSO21)
Reserved
—
—
Reserved
—
Reserved
—
Reserved
121
P14.3
A1 / PU / General-purpose input
VDDP3
TIM0_6
GTM_TIN
SCU_REQ10
SCU input
SCU_HWCFG3_BMI
SCU input
P14.3
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM0_6
TOM1_6
IOM_REF2_4
—
O2
O3
O4
O5
O6
O7
QSPI2_SLSO3
QSPI2 output (aka: SLSO23)
ASCLIN1 output (aka: ASLSO1)
Reserved
ASCLIN1_SLSO
—
—
—
Reserved
Reserved
Data Sheet
2-100
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-26 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
122
P14.4
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
P14.4
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM reference input
Reserved
TOM0_7
TOM1_7
TOM0_7N
TOM1_7N
IOM_REF2_8
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
123
P14.5
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
P14.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
IOM_REF2_11
IOM reference input
Reserved
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
ERAY0_TXDB
—
ERAY0 output
Reserved
Data Sheet
2-101
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-26 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
124
P14.6
I
A1+ / PU / General-purpose input
VDDP3
TIM0_1
GTM_TIN
SCU_HWCFG0_DCLD
O
SCU input
QSPI0_MRSTD
QSPI0 input (aka: MRST0D)
General-purpose output
GTM_TOUT
P14.6
O0
O1
TOM0_1
TOM1_1
GTM_TOUT
IOM_REF2_14
IOM reference input
Reserved
—
O2
O3
O4
O5
O6
O7
I
QSPI2_SLSO2
QSPI2 output (aka: SLSO22)
Reserved
—
—
Reserved
ERAY0_TXENB
ERAY0 output
—
Reserved
125
P14.7
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
ERAY0_RXDB0
ERAY0 input
P14.7
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
IOM_REF2_15
IOM reference input
ASCLIN0 output (aka: ARTS0)
QSPI2 output (aka: SLSO24)
Reserved
ASCLIN0_RTS
O2
O3
O4
O5
O6
O7
QSPI2_SLSO4
—
—
—
—
Reserved
Reserved
Reserved
Data Sheet
2-102
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-26 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
127
P14.8
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1D)
CAN node 2 input (aka: RXDCAN2D)
ERAY0 input
ASCLIN1_RXD
CAN2_RXDD
ERAY0_RXDA0
P14.8
O0
O1
O2
O3
O4
O5
O6
O7
General-purpose output
GTM_TOUT
TOM0_2
—
—
—
—
—
—
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Table 2-27 Port 15 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
109
P15.0
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P15.0
O0
O1
TOM1_3
TOM0_11
TOM0_7N
TOM1_7N
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI0_SLSO13
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
ASCLIN1 output (aka: ATX1)
IOM monitor input
O2
IOM reference input
O3
O4
O5
QSPI0 output (aka: SLSO013)
Reserved
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
ASCLIN1_SCLK
—
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
O6
O7
ASCLIN1 output (aka: ASCLK1)
Reserved
Data Sheet
2-103
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-27 Port 15 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
110
P15.1
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1A)
QSPI2 input (aka: SLSI2B)
CAN node 2 input (aka: RXDCAN2A)
SCU input
ASCLIN1_RXA
QSPI2_SLSIB
CAN2_RXDA
SCU_REQ16
SCU_EVRWUPB
P15.1
AI
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT
TOM1_4
TOM0_12
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
ASCLIN1 output (aka: ATX1)
IOM monitor input
TOM1_4
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_SLSO5
—
O2
IOM reference input
O3
O4
O5
O6
O7
I
QSPI2 output (aka: SLSO25)
Reserved
—
Reserved
—
Reserved
—
Reserved
111
P15.2
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI2 input (aka: MRST2E)
QSPI2 input (aka: SLSI2A)
QSPI2 input (aka: HSIC2INA)
General-purpose output
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT
QSPI2_MRSTE
QSPI2_SLSIA
QSPI2_HSICINA
P15.2
O0
O1
TOM1_5
TOM0_13
TOM0_4N
TOM1_4N
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
QSPI2_SLSO0
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
ASCLIN0 output (aka: ATX0)
IOM monitor input
O2
IOM reference input
O3
O4
O5
QSPI2 output (aka: SLSO20)
Reserved
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
ASCLIN0_SCLK
—
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
O6
O7
ASCLIN0 output (aka: ASCLK0)
Reserved
Data Sheet
2-104
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-27 Port 15 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
112
P15.3
I
A1+ /
HighZ /
VDDP3
General-purpose input
ASCLIN0 input (aka: ARX0B)
QSPI2 input (aka: SCLK2A)
QSPI2 input (aka: HSIC2INB)
CAN node 1 input (aka: RXDCAN1A)
General-purpose output
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT
ASCLIN0_RXB
QSPI2_SCLKA
QSPI2_HSICINB
CAN1_RXDA
P15.3
O0
O1
TOM1_6
TOM0_14
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
ASCLIN0 output (aka: ATX0)
IOM monitor input
TOM1_5
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
QSPI2_SCLK
—
O2
IOM reference input
QSPI2 output (aka: SCLK2)
Reserved
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
113
P15.4
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI2 input (aka: MRST2A)
SCU input
QSPI2_MRSTA
SCU_REQ0
P15.4
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT
TOM1_7
TOM0_15
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_MRST
IOM_MON2_2
IOM_REF2_2
—
O2
O3
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI2 output (aka: MRST2)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-105
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-27 Port 15 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
114
P15.5
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1B)
QSPI2 input (aka: MTSR2A)
SCU input
ASCLIN1_RXB
QSPI2_MTSRA
SCU_REQ13
P15.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
TOM0_5N
TOM1_5N
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_MTSR
—
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI2 output (aka: MTSR2)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
P15.6
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
115
I
A1 /
HighZ /
VDDP3
TIM0_0
QSPI2_MTSRB
P15.6
QSPI2 input (aka: MTSR2B)
General-purpose output
GTM_TOUT
O0
O1
TOM0_0
TOM1_0
GTM_TOUT
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI2_MTSR
—
QSPI2 output (aka: MTSR2)
Reserved
QSPI2_SCLK
—
QSPI2 output (aka: SCLK2)
Reserved
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-106
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-27 Port 15 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
116
P15.7
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI2_MRSTB
P15.7
QSPI2 input (aka: MRST2B)
General-purpose output
GTM_TOUT
O0
O1
TOM0_1
TOM1_1
—
GTM_TOUT
O2
O3
Reserved
QSPI2_MRST
IOM_MON2_2
IOM_REF2_2
—
QSPI2 output (aka: MRST2)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
P15.8
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
117
I
A1 /
HighZ /
VDDP3
TIM0_2
QSPI2_SCLKB
SCU_REQ1
P15.8
QSPI2 input (aka: SCLK2B)
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
—
GTM_TOUT
O2
O3
O4
O5
O6
O7
Reserved
QSPI2_SCLK
—
QSPI2 output (aka: SCLK2)
Reserved
—
Reserved
—
Reserved
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-107
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-28 Port 20 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
93
P20.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
SCU_REQ9
OCDS_TGI0
GPT120_T6EUDA
CAN11_RXDC
CAN12_RXDC
P20.0
SCU input
OCDS input
GPT120 input
CAN1 node 1 input (aka: RXDCAN11C)
CAN1 node 2 input (aka: RXDCAN12C)
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
O0
O1
TOM0_6
TOM1_6
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
OCDS_TGO0
P20.2
OCDS
94
95
I
InputOnly General-purpose input
/ PU /
VDDP3
TESTMODE
Factory Test Mode Enable
P20.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
GPT120_T6INA
P20.3
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM1_12
TOM0_4
IOM_MON1_14
—
GTM_TOUT (= DTM1_OUT4)
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI0_SLSO9
QSPI2_SLSO9
CAN12_TXD
—
QSPI0 output (aka: SLSO09)
QSPI2 output (aka: SLSO29)
CAN1 node 2 output (aka: TXDCAN12)
Reserved
—
Reserved
Data Sheet
2-108
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-28 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
100
P20.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
P20.6
O0
O1
General-purpose output
GTM_TOUT
TOM1_10
TOM0_10
IOM_MON1_15
ASCLIN1_RTS
QSPI0_SLSO8
QSPI2_SLSO8
—
GTM_TOUT
IOM monitor input
ASCLIN1 output (aka: ARTS1)
QSPI0 output (aka: SLSO08)
QSPI2 output (aka: SLSO28)
Reserved
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
101
P20.7
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
ASCLIN1_CTSA
CAN0_RXDB
P20.7
ASCLIN1 input (aka: ACTS1A)
CAN node 0 input (aka: RXDCAN0B)
General-purpose output
GTM_TOUT
O0
O1
TOM1_11
TOM0_11
IOM_MON2_4
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-109
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-28 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
102
P20.8
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
P20.8
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM monitor input
TOM1_7
TOM0_7
TOM0_4
TOM1_4
IOM_MON2_8
ASCLIN1_SLSO
QSPI0_SLSO0
QSPI1_SLSO0
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
SCU_WDT0LCK
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
P20.9
O2
O3
O4
O5
ASCLIN1 output (aka: ASLSO1)
QSPI0 output (aka: SLSO00)
QSPI1 output (aka: SLSO10)
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
SCU output
O6
O7
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
ASCLIN1 input (aka: ARX1C)
QSPI0 input (aka: SLSI0B)
SCU input
103
I
A1 /
HighZ /
VDDP3
ASCLIN1_RXC
QSPI0_SLSIB
SCU_REQ11
CAN12_RXDE
P20.9
CAN1 node 2 input (aka: RXDCAN12E)
General-purpose output
GTM_TOUT
O0
O1
TOM1_13
TOM0_13
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM monitor input
TOM1_4N
IOM_MON2_11
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SLSO1
QSPI1_SLSO1
—
QSPI0 output (aka: SLSO01)
QSPI1 output (aka: SLSO11)
Reserved
SCU_WDTSLCK
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SCU output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-110
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-28 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
104
P20.10
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P20.10
O0
O1
TOM1_14
TOM0_14
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
TOM1_5
IOM_MON2_14
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI0_SLSO6
QSPI2_SLSO7
CAN12_TXD
ASCLIN1_SCLK
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
P20.11
O2
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI0 output (aka: SLSO06)
QSPI2 output (aka: SLSO27)
CAN1 node 2 output (aka: TXDCAN12)
ASCLIN1 output (aka: ASCLK1)
CCU61 output
O3
O4
O5
O6
O7
IOM monitor input
IOM reference input
General-purpose input
QSPI0 input (aka: SCLK0A)
General-purpose output
GTM_TOUT
105
I
A1+ /
HighZ /
VDDP3
QSPI0_SCLKA
P20.11
O0
O1
TOM1_15
TOM0_15
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM monitor input
TOM1_5N
IOM_MON2_15
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SCLK
—
QSPI0 output (aka: SCLK0)
Reserved
CAN11_TXD
—
CAN1 node 1 output (aka: TXDCAN11)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-111
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-28 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
106
P20.12
I
A1 /
HighZ /
VDDP3
General-purpose input
QSPI0 input (aka: MRST0A)
CAN1 node 1 input (aka: RXDCAN11H)
IOM pad input
QSPI0_MRSTA
CAN11_RXDH
IOM_PIN13
P20.12
O0
O1
General-purpose output
GTM_TOUT
TOM1_0
TOM0_8
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
TOM1_6
IOM_MON0_13
—
O2
O3
Reserved
QSPI0_MRST
IOM_MON2_0
IOM_REF2_0
QSPI0_MTSR
—
QSPI0 output (aka: MRST0)
IOM monitor input
IOM reference input
QSPI0 output (aka: MTSR0)
Reserved
O4
O5
O6
O7
—
Reserved
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
P20.13
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
QSPI0 input (aka: SLSI0A)
CAN1 node 2 input (aka: RXDCAN12H)
IOM pad input
107
I
A1+ /
HighZ /
VDDP3
QSPI0_SLSIA
CAN12_RXDH
IOM_PIN14
P20.13
O0
O1
General-purpose output
GTM_TOUT
TOM1_1
TOM0_9
GTM_TOUT
TOM0_6N
TOM1_6N
IOM_MON0_14
—
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM monitor input
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SLSO2
QSPI1_SLSO2
QSPI0_SCLK
—
QSPI0 output (aka: SLSO02)
QSPI1 output (aka: SLSO12)
QSPI0 output (aka: SCLK0)
Reserved
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-112
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-28 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
108
P20.14
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI0 input (aka: MTSR0A)
IOM pad input
QSPI0_MTSRA
IOM_PIN15
P20.14
O0
O1
General-purpose output
GTM_TOUT
TOM1_2
TOM0_10
TOM0_7
TOM1_7
IOM_MON0_15
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI0_MTSR
—
QSPI0 output (aka: MTSR0)
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
—
Reserved
Table 2-29 Port 21 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
84
P21.2
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SCU_EMGSTOPB
SCU input
P21.2
TOM0_0
TOM1_0
TOM0_4
TOM1_4
—
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
ETH0_MDC
—
Ethernet output
Reserved
—
Reserved
Data Sheet
2-113
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-29 Port 21 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
85
P21.3
TIM0_1
ETH0_MDIOD
P21.3
TOM0_1
TOM1_1
TOM0_4N
TOM1_4N
—
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
Ethernet input
General-purpose output
GTM_TOUT
O0
O1
GTM_TOUT
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
Reserved
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
ETH0_MDIO
P21.4
TIM0_2
P21.4
TOM0_2
TOM1_2
TOM0_5
TOM1_5
—
Ethernet output
General-purpose input
GTM_TIN
86
I
A1 /
HighZ /
VDDP3
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-114
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-29 Port 21 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
87
P21.5
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
P21.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
Reserved
TOM1_5N
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
88
P21.6
A1 / PU / General-purpose input
VDDP3
TIM0_4
GTM_TIN
TDI
OCDS input
OCDS_TGI2
OCDS input
GPT120_T5EUDA
GPT120 input
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
P21.6
O0
O1
TOM0_4
TOM1_4
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
GPT120_T3OUT
OCDS_TGO2
GPT120 output
OCDS
Data Sheet
2-115
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-29 Port 21 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
90
P21.7
I
A1+ / PU / General-purpose input
VDDP3
TIM0_5
GTM_TIN
OCDS_DAP2
OCDS_TGI3
GPT120_T5INA
ETH0_RXERB
P21.7
OCDS input
OCDS input
GPT120 input
Ethernet input
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
O0
O1
TOM0_5
TOM1_5
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
GPT120_T6OUT
OCDS_TGO3
OCDS_DAP2
TDO
GPT120 output
OCDS
O
OCDS Output
JTAG Output
O
Table 2-30 Port 22 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
74
P22.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI3_MTSRE
QSPI3 input (aka: MTSR3E)
General-purpose output
GTM_TOUT
P22.0
O0
O1
TOM0_9
TOM1_1
GTM_TOUT
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI3_MTSR
QSPI3 output (aka: MTSR3)
Reserved
—
—
—
—
Reserved
Reserved
Reserved
Data Sheet
2-116
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-30 Port 22 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
75
P22.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
QSPI3_MRSTE
P22.1
QSPI3 input (aka: MRST3E)
General-purpose output
GTM_TOUT
O0
O1
TOM0_8
TOM1_0
TOM0_6
TOM1_6
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
O2
O3
QSPI3_MRST
IOM_MON2_3
IOM_REF2_3
—
QSPI3 output (aka: MRST3)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
76
P22.2
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI3_SLSID
P22.2
QSPI3 input (aka: SLSI3D)
General-purpose output
GTM_TOUT
O0
O1
TOM0_11
TOM1_3
TOM0_6N
TOM1_6N
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO12
—
QSPI3 output (aka: SLSO312)
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-117
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-30 Port 22 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
77
P22.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
QSPI3_SCLKE
QSPI3 input (aka: SCLK3E)
General-purpose output
GTM_TOUT
P22.3
O0
O1
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
Reserved
TOM0_7
TOM1_7
—
O2
O3
O4
O5
O6
O7
I
QSPI3_SCLK
QSPI3 output (aka: SCLK3)
Reserved
—
—
Reserved
—
Reserved
—
Reserved
78
P22.4
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
Reserved
P22.4
O0
O1
TOM0_7N
TOM1_7N
—
O2
O3
O4
O5
O6
O7
—
Reserved
QSPI0_SLSO12
QSPI0 output (aka: SLSO012)
Reserved
—
—
—
Reserved
Reserved
Data Sheet
2-118
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-31 Port 23 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
73
P23.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
P23.1
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT
TOM0_6
TOM0_15
ASCLIN1_RTS
QSPI3_SLSO13
GTM_CLK0
SCU_EXTCLK1
SCU_EXTCLK0
—
O2
O3
O4
O5
O6
O7
ASCLIN1 output (aka: ARTS1)
QSPI3 output (aka: SLSO313)
GTM output
SCU output
SCU output
Reserved
Table 2-32 Port 33 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
56
P33.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
IOM_PIN0
IOM pad input
P33.0
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM monitor input
Reserved
TOM0_4
TOM1_4
IOM_MON0_0
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
VADC_G1BFL0
—
VADC output
Reserved
Data Sheet
2-119
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
57
P33.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_5
IOM_PIN1
P33.1
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
Reserved
TOM0_5
TOM1_5
IOM_MON0_1
—
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
VADC_EMUX02
VADC_G1BFL1
—
VADC output
VADC output
Reserved
58
P33.2
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
IOM_PIN2
P33.2
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
Reserved
TOM0_6
TOM1_6
IOM_MON0_2
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_EMUX01
VADC_G1BFL2
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-120
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
59
P33.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
IOM_PIN3
P33.3
IOM pad input
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
O0
O1
TOM0_7
TOM1_7
IOM_MON0_3
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_EMUX00
VADC_G1BFL3
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
P33.4
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
60
I
A1 /
HighZ /
VDDP3
TIM0_0
CCU61_CTRAPC
IOM_PIN4
P33.4
CCU61 input
IOM pad input
General-purpose output
GTM_TOUT
O0
O1
TOM0_0
TOM1_0
IOM_MON0_4
—
GTM_TOUT
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
VADC_EMUX12
VADC_G0BFL0
—
VADC output
VADC output
Reserved
Data Sheet
2-121
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
61
P33.5
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
CCU61_CCPOS2C
GPT120_T4EUDB
IOM_PIN5
CCU61 input
GPT120 input
IOM pad input
P33.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_1
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
QSPI0 output (aka: SLSO07)
QSPI1 output (aka: SLSO17)
Reserved
TOM1_5
IOM_MON0_5
QSPI0_SLSO7
QSPI1_SLSO7
—
O2
O3
O4
O5
O6
O7
VADC_EMUX11
VADC_G0BFL1
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-122
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
62
P33.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
ASCLIN1_RXF
CCU61_CCPOS1C
GPT120_T2EUDB
CAN10_RXDH
IOM_PIN6
ASCLIN1 input (aka: ARX1F)
CCU61 input
GPT120 input
CAN1 node 0 input (aka: RXDCAN10H)
IOM pad input
P33.6
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM monitor input
Reserved
TOM1_5N
IOM_MON0_6
—
O2
O3
O4
—
Reserved
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
VADC_EMUX10
VADC_G0BFL2
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
HSM_HSM1
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
VADC output
O5
O6
O7
VADC output
CCU61 output
IOM monitor input
IOM reference input
HSM output
O
Data Sheet
2-123
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
63
P33.7
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
CAN0_RXDE
SCU_REQ8
CCU61_CCPOS0C
GPT120_T2INB
IOM_PIN7
P33.7
CAN node 0 input (aka: RXDCAN0E)
SCU input
CCU61 input
GPT120 input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
Reserved
TOM1_6
IOM_MON0_7
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO7
—
QSPI3 output (aka: SLSO37)
Reserved
CAN10_TXD
VADC_G0BFL3
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
HSM_HSM2
CAN1 node 0 output (aka: TXDCAN10)
VADC output
CCU61 output
IOM monitor input
IOM reference input
HSM output
O
Data Sheet
2-124
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
64
P33.8
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
SCU_EMGSTOPA
IOM_PIN8
P33.8
SCU input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM monitor input
Reserved
TOM0_4
TOM1_4
TOM0_6N
TOM1_6N
IOM_MON0_8
—
O2
O3
O4
O5
QSPI3_SLSO2
—
QSPI3 output (aka: SLSO32)
Reserved
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
—
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
SMU_FSP
CCU61 output
IOM monitor input
IOM reference input
SMU
O
Data Sheet
2-125
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
65
P33.9
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI3_HSICINA
IOM_PIN9
P33.9
QSPI3 input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_1
GTM_TOUT
TOM0_7
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
TOM1_7
IOM_MON0_9
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO1
—
QSPI3 output (aka: SLSO31)
Reserved
—
Reserved
—
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
P33.10
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
66
I
A1+ /
HighZ /
VDDP3
TIM0_0
QSPI3_SLSIC
QSPI3_HSICINB
IOM_PIN10
P33.10
QSPI3 input (aka: SLSI3C)
QSPI3 input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
TOM0_7N
TOM1_7N
IOM_MON0_10
QSPI1_SLSO6
QSPI3_SLSO11
ASCLIN1_SLSO
GTM_CLK1
SCU_EXTCLK1
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM monitor input
QSPI1 output (aka: SLSO16)
QSPI3 output (aka: SLSO311)
ASCLIN1 output (aka: ASLSO1)
GTM output
O2
O3
O4
O5
O6
O7
SCU output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-126
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-32 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
67
P33.11
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
QSPI3_SCLKD
SCU_REQ17
IOM_PIN11
P33.11
QSPI3 input (aka: SCLK3D)
SCU input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
GTM_TOUT
IOM_MON0_11
ASCLIN1_SCLK
QSPI3_SCLK
—
IOM monitor input
ASCLIN1 output (aka: ASCLK1)
QSPI3 output (aka: SCLK3)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
SMPS_DCDCSYNC
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SMPS_DCDCSYNC
P33.12
SCU output
CCU61 output
IOM monitor input
IOM reference input
SCU output
O
I
68
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
QSPI3_MTSRD
IOM_PIN12
P33.12
QSPI3 input (aka: MTSR3D)
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM1_12
TOM0_12
GTM_TOUT
IOM_MON0_12
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI3_MTSR
ASCLIN1_SCLK
—
IOM monitor input
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI3 output (aka: MTSR3)
ASCLIN1 output (aka: ASCLK1)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-127
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-33 Port 34 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
52
P34.0
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P34.0
O0
O1
O2
O3
O4
O5
O6
O7
I
TOM1_12
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
53
P34.1
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P34.1
O0
O1
O2
TOM1_13
ASCLIN0_TX
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
IOM_MON2_12
IOM_REF2_12
—
O3
O4
CAN0_TXD
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
Reserved
IOM_MON2_5
IOM_REF2_5
—
O5
O6
O7
I
—
Reserved
—
Reserved
54
P34.2
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN0 input (aka: ARX0D)
CAN node 0 input (aka: RXDCAN0G)
General-purpose output
GTM_TOUT
ASCLIN0_RXD
CAN0_RXDG
P34.2
O0
O1
O2
O3
O4
O5
O6
O7
TOM1_14
—
—
—
—
—
—
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Data Sheet
2-128
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-33 Port 34 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
55
P34.3
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ACTS1B)
General-purpose output
GTM_TOUT
ASCLIN1_CTSB
P34.3
O0
O1
O2
O3
O4
O5
O6
O7
TOM1_15
—
Reserved
—
Reserved
QSPI2_SLSO10
QSPI2 output (aka: SLSO210)
Reserved
—
—
—
Reserved
Reserved
Table 2-34 Port 40 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
51
P40.0
I
S / VDDM General-purpose input
VADC input channel 0 of group 0
S / VDDM General-purpose input
VADC input channel 1 of group 0
VADCG0_0
P40.1
AI
I
50
VADCG0_1
AI
(with multiplexer diagnostics)
VADCG2_0
P40.2
VADC input channel 0 of group 2
49
I
S / VDDM General-purpose input
VADCG0_2
AI
VADC input channel 2 of group 0
(with multiplexer diagnostics)
48
47
46
45
40
P40.3
I
S / VDDM General-purpose input
VADC input channel 3 of group 0
S / VDDM General-purpose input
VADC input channel 4 of group 0
S / VDDM General-purpose input
VADC input channel 5 of group 0
S / VDDM General-purpose input
VADC input channel 6 of group 0
S / VDDM General-purpose input
VADCG0_3
P40.4
AI
I
VADCG0_4
P40.5
AI
I
VADCG0_5
P40.6
AI
I
VADCG0_6
P40.7
AI
I
VADCG0_7
AI
VADC input channel 7 of group 0
(with pull down diagnostics)
39
38
P40.8
I
S / VDDM General-purpose input
VADC input channel 8 of group 0
S / VDDM General-purpose input
VADCG0_8
P40.9
AI
I
VADCG0_9
AI
VADC input channel 9 of group 0
(with multiplexer diagnostics)
Data Sheet
2-129
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-34 Port 40 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
37
P40.10
I
S / VDDM General-purpose input
VADC input channel 10 of group 0
VADCG0_10
AI
(with multiplexer diagnostics)
S / VDDM General-purpose input
SENT input
36
P40.11
I
SENT_SENT0A
CCU60_CCPOS0D
VADCG0_11
CCU60 input
AI
VADC input channel 11 of group 0
Table 2-35 Port 41 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
35
P41.0
I
S / VDDM General-purpose input
SENT input
SENT_SENT1A
CCU60_CCPOS1B
VADCG1_0
P41.1
CCU60 input
AI
I
VADC input channel 0 of group 1
S / VDDM General-purpose input
VADC input channel 1 of group 1
34
33
VADCG1_1
AI
(with multiplexer diagnostics)
VADCG3_0
VADC input channel 0 of group 3
P41.2
I
S / VDDM General-purpose input
SENT_SENT2A
CCU61_CCPOS1B
VADCG1_2
SENT input
CCU61 input
AI
I
VADC input channel 2 of group 1
(with multiplexer diagnostics)
32
P41.3
S / VDDM General-purpose input
SENT_SENT3A
CCU61_CCPOS1D
VADCG1_3
SENT input
CCU61 input
AI
VADC input channel 3 of group 1
(with pull down diagnostics)
31
30
29
28
27
P41.4
I
S / VDDM General-purpose input
VADC input channel 4 of group 1
S / VDDM General-purpose input
VADC input channel 5 of group 1
S / VDDM General-purpose input
VADC input channel 6 of group 1
S / VDDM General-purpose input
VADC input channel 7 of group 1
S / VDDM General-purpose input
VADCG1_4
P41.5
AI
I
VADCG1_5
P41.6
AI
I
VADCG1_6
P41.7
AI
I
VADCG1_7
P41.8
AI
I
VADCG1_8
AI
VADC input channel 8 of group 1
Data Sheet
2-130
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-144-27 Package Variant Pin
Table 2-35 Port 41 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
26
P41.9
I
S / VDDM General-purpose input
VADC input channel 9 of group 1
VADCG1_9
AI
(with multiplexer diagnostics)
25
24
P41.10
I
S / VDDM General-purpose input
VADCG1_10
AI
VADC input channel 10 of group 1
(with multiplexer diagnostics)
P41.11
I
S / VDDM General-purpose input
VADCG1_11
AI
VADC input channel 11 of group 1
Table 2-36 System I/O
Pin
Symbol
Ctrl. Buffer
Type
Function
81
82
89
XTAL1
XTAL2
TMS/DAP1
DAP1
I
VDDP3
VDDP3
Main Oscillator/PLL/Clock Generator Input
Main Oscillator/PLL/Clock Generator Output
O
I
A1+ / PD / Debug Interface
VDDP3
I/O
I
Device Access Port LIne 1
91
92
TRST
InputOnly JTAG Module Reset/Enable Input
/ PD /
VDDP3
TCK/DAP0
DAP0
I
I
InputOnly OCDS input
/ PD /
VDDP3
Device Access Port LIne 0
96
97
ESR1
I/O
A1+ / PU / SCU input
VDDP3
EVRWUP
PORST
I
I
EVR Wakeup Pin
InputOnly Power On Reset
/ PD /
Additional strong PD in case of power fail.
VDDP3
98
ESR0
I/O
I
A1+/OD / SCU input/output
VDDP3
EVRWUP
EVR Wakeup Pin
Table 2-37 Supply
Pin
Symbol
Ctrl. Buffer
Type
Function
41
VAGND
VAREF
VDDP3
I
I
I
—
—
—
Negative Analog Reference Voltage 0
Positive Analog Reference Voltage 0
42
126
Digital I/O Power Supply (3.3V)
This pin supplies also the Flash 3.3V.
69
70
VDDP3
VDD
I
I
—
—
Digital I/O Power Supply (3.3V)
Digital Core Power Supply (1.3V)
Output of EVR13.
Data Sheet
2-131
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-37 Supply (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
79
VDD
I
—
Digital Core Power Supply (1.3V)
This pin supplies also the main XTAL Oscillator/PLL (1.3V).
A higher decoupling capacitor is therefore recommended to
the VSS pin for better noise immunity.
83
VDDP3
I
—
Digital I/O Power Supply (3.3V)
This pin supplies also the main XTAL Oscillator/PLL (3.3V).
A higher decoupling capacitor is therefore recommended to
the VSS pin for better noise immunity.
44
23
10
22
99
43
80
VDDM
I
I
I
I
I
I
I
—
—
—
—
—
—
—
ADC Power Supply (5.0V)
Digital I/O Power Supply (3.3V)
Digital Core Power Supply (1.3V)
Digital Core Power Supply (1.3V)
Digital Core Power Supply (1.3V)
Analog Ground for VDDM
Digital Ground
VDDP3
V
DD/VDDSB
VDD
VDD
VSSM
VSS
2.2.2
Pull-Up/Pull-Down Reset Behavior of the Pins
Table 2-38 List of Pull-Up/Pull-Down Reset Behavior of the Pins
Pins
PORST = 0
PORST = 1
all GPIOs
High-Z
TDI, TESTMODE
PORST1)
Pull-up
Pull-down with IPORST relevant
Pull-down with IPDLI relevant
TRST, TCK, TMS
ESR0
Pull-down
The open-drain driver is used to
drive low.2)
Pull-up3)
ESR1
Pull-up3)
Pull-up
Pull-up
P14.2, P14.3, P14.6
P21.7 / TDO
High-Z/Pull-up4)
1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation.
2) Valid additionally after deactivation of PORST until the internal reset phase has finished. See the SCU chapter for details.
3) See the SCU_IOCR register description.
4) Depends on JTAG/DAP selection with TRST.
2.3
PG-TQFP-100-23 Package Variant Pin Configuration of TC233x
Figure 2-1 is showing the TC233x pinout for the package variant: PG-TQFP-100-23.
Data Sheet
2-132
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
P02.0
P02.1
P02.2
P02.3
P02.4
P02.5
P02.6
P02.7
P02.8
1
2
3
4
5
6
7
8
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
P20.14
P20.13
P20.12
P20.11
P20.10
P20.9
P20.8
VDD
ESR0
PORST
ESR1
P20.2/TESTMODE
TCK/DAP0
TRST
P21.7/TDO/DAP2
TMS/DAP1
P21.6/TDI
P21.4
P21.3
P21.2
VDDP3
XTAL2
9
P00.0
VDD
VDDP3
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
TC23x
(Top View)
AN23/P41.11
AN22/P41.10
AN21/P41.9
AN20/P41.8
AN19/P41.7
AN18/P41.6
AN17/P41.5
AN16/P41.4
AN15/P41.3
AN14/P41.2
AN13/P41.1
AN12/P41.0
AN11/P40.11
XTAL1
VDD
P23.1
Figure 2-3 TC233x Pinout for the package variant PG-TQFP-100-23.
Data Sheet
2-133
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
2.3.1
Port Functions and Pinning Tables
2.3.1.1
How to Read the Following Port Function Tables
Some hints for interpreting the following tables.
Column “Ctrl.”:
I = Input (for GPIO port Lines with IOCR bit field Selection PCx = 0XXXB)
AI = Analog input
O = Output
O0 = Output with IOCR bit field selection PCx = 1X000B
O1 = Output with IOCR bit field selection PCx = 1X001B (ALT1)
O2 = Output with IOCR bit field selection PCx = 1X010B (ALT2)
O3 = Output with IOCR bit field selection PCx = 1X011B (ALT3)
O4 = Output with IOCR bit field selection PCx = 1X100B (ALT4)
O5 = Output with IOCR bit field selection PCx = 1X101B (ALT5)
O6 = Output with IOCR bit field selection PCx = 1X110B (ALT6)
O7 = Output with IOCR bit field selection PCx = 1X111B (ALT7)
Table 2-39 Example Port Table
Pin
Symbol
Ctrl.
Buffer
Type
Function
10
Pxx.y
I
A1/ HighZ/ General-purpose input
VDDP3
TIMm_n
GTM_TIN
TOMa_b
O1
GTM_TOUT
TOMc_d
GTM_TOUT
IOM_REFv_w
ASCLINz_RTS
IOM reference input
ASCLIN0 output (aka ARTSz)
O2
To each input several functions can be connected. The peripherals’ configuration defines if this input is used.
The port module (see corresponding chapter) decides which of the 8 output signals O0 to O7 drives the pad.
Some Ox rows list more than one function, e.g. several GTM_TOUT outputs and IOM reference inputs. The GTM
module (see corresponding chapter) has its own sub-multiplexer structure that defines which of the GTM sub-units
drives this signal. Additionally the IOM modules “listens” on these output signals (see IOM chapter).
Some pin symbol names were changed in this AURIX device compared to other AURIX devices to improve naming
systematics. The previously used symbol name is documented in the “Function” column with the text “(aka …)”1).
Column “Type”:
IN = Input only
A1 = Pad class A1 (3.3V)
A1+ = Pad class A1+ (3.3V)
S = ADC with digital input. Pad class D for analog input “AI”, pad class S for digital input “I”.
PU = with pull-up device connected during reset (PORST = 0)
PD = with pull-down device connected during reset (PORST = 0)
1) “aka” as abbreviation for “also known as”.
Data Sheet
2-134
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
High-Z = High-Z during reset (PORST = 0)
Vx = Supply (the Exposed Pad is also considered as VSS and shall be connected to ground)
2.3.1.2
Tables
Port function and pinning tables.
Table 2-40 Port 00 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
10
P00.0
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
CCU61_CTRAPA
CCU60_T12HRE
P00.0
CCU61 input
CCU60 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM reference input
ASCLIN0 output (aka: ASCLK0)
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
TOM1_4
IOM_REF0_9
ASCLIN0_SCLK
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
O2
O3
O4
O5
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
—
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-135
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
1
P02.0
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SCU_REQ6
CCU60_CC60INA
CCU61_CC60INB
P02.0
SCU input
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_8
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM reference input
Reserved
TOM1_4
IOM_REF0_0
—
O2
O3
O4
O5
QSPI3_SLSO1
—
QSPI3 output (aka: SLSO31)
Reserved
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
ERAY0_TXDA
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-136
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
2
P02.1
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
CAN0_RXDA
ERAY0_RXDA2
SCU_REQ14
P02.1
CAN node 0 input (aka: RXDCAN0A)
ERAY0 input
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_9
TOM1_9
GTM_TOUT
TOM0_4N
TOM1_4N
IOM_REF0_1
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO2
—
QSPI3 output (aka: SLSO32)
Reserved
—
Reserved
—
Reserved
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-137
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
3
P02.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
CCU60_CC61INA
CCU61_CC61INB
P02.2
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_10
TOM1_10
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM reference input
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI3 output (aka: SLSO33)
Reserved
TOM1_5
IOM_REF0_2
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI3_SLSO3
—
O2
O3
O4
O5
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
ERAY0_TXDB
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-138
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
4
P02.3
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
ASCLIN1_RXG
CAN2_RXDB
ERAY0_RXDB2
P02.3
ASCLIN1 input (aka: ARX1G)
CAN node 2 input (aka: RXDCAN2B)
ERAY0 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_11
TOM1_11
TOM0_5N
TOM1_5N
IOM_REF0_3
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
QSPI3_SLSO4
—
QSPI3 output (aka: SLSO34)
Reserved
—
Reserved
—
Reserved
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-139
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
5
P02.4
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
QSPI3_SLSIA
CAN0_RXDD
CCU60_CC62INA
CCU61_CC62INB
P02.4
QSPI3 input (aka: SLSI3A)
CAN node 0 input (aka: RXDCAN0D)
CCU60 input
CCU61 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_12
TOM1_12
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM1_6
IOM_REF0_4
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO0
—
QSPI3 output (aka: SLSO30)
Reserved
CAN10_TXD
ERAY0_TXENA
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CAN1 node 0 output (aka: TXDCAN10)
ERAY0 output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-140
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
6
P02.5
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_5
QSPI3_MRSTA
SENT_SENT3C
P02.5
QSPI3 input (aka: MRST3A)
SENT input
O0
O1
General-purpose output
GTM_TOUT
TOM0_13
TOM1_13
GTM_TOUT
TOM0_6N
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM reference input
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
TOM1_6N
IOM_REF0_5
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
QSPI3_MRST
IOM_MON2_3
IOM_REF2_3
—
O2
O3
IOM reference input
QSPI3 output (aka: MRST3)
IOM monitor input
IOM reference input
Reserved
O4
O5
O6
O7
CAN11_TXD
ERAY0_TXENB
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
CAN1 node 1 output (aka: TXDCAN11)
ERAY0 output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-141
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
7
P02.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
QSPI3_MTSRA
SENT_SENT2C
CCU60_CC60INC
CCU60_CCPOS0A
CCU61_T12HRB
GPT120_T3INA
CAN10_RXDF
P02.6
QSPI3 input (aka: MTSR3A)
SENT input
CCU60 input
CCU60 input
CCU61 input
GPT120 input
CAN1 node 0 input (aka: RXDCAN10F)
General-purpose output
GTM_TOUT
O0
O1
TOM0_14
TOM1_14
GTM_TOUT
TOM0_7
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
Reserved
TOM1_7
IOM_REF0_6
—
O2
O3
O4
O5
O6
O7
QSPI3_MTSR
—
QSPI3 output (aka: MTSR3)
Reserved
VADC_EMUX00
—
VADC output
Reserved
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-142
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
8
P02.7
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
QSPI3_SCLKA
SENT_SENT1C
CCU60_CC61INC
CCU60_CCPOS1A
CCU61_T13HRB
GPT120_T3EUDA
CAN11_RXDF
PMU_FDEST
P02.7
QSPI3 input (aka: SCLK3A)
SENT input
CCU60 input
CCU60 input
CCU61 input
GPT120 input
CAN1 node 1 input (aka: RXDCAN11F)
PMU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_15
TOM1_15
GTM_TOUT
TOM0_7N
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM reference input
Reserved
TOM1_7N
IOM_REF0_7
—
O2
O3
O4
O5
O6
O7
QSPI3_SCLK
—
QSPI3 output (aka: SCLK3)
Reserved
VADC_EMUX01
SENT_SPC1
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
VADC output
SENT output
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-143
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-41 Port 02 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
9
P02.8
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SENT_SENT0C
CCU60_CC62INC
CCU60_CCPOS2A
CCU61_T12HRC
CCU61_T13HRC
GPT120_T4INA
P02.8
SENT input
CCU60 input
CCU60 input
CCU61 input
CCU61 input
GPT120 input
O0
O1
General-purpose output
GTM_TOUT
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM reference input
QSPI3 output (aka: SLSO35)
Reserved
TOM1_4N
IOM_REF0_8
QSPI3_SLSO5
—
O2
O3
O4
O5
O6
O7
—
Reserved
VADC_EMUX02
—
VADC output
Reserved
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-144
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-42 Port 10 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
99
P10.5
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
SCU_HWCFG4
CAN10_RXDA
P10.5
SCU input
CAN1 node 0 input (aka: RXDCAN10A)
General-purpose output
GTM_TOUT
O0
O1
TOM0_2
TOM1_10
IOM_REF2_9
—
GTM_TOUT
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
I
QSPI3_SLSO8
QSPI1_SLSO9
GPT120_T6OUT
—
QSPI3 output (aka: SLSO38)
QSPI1 output (aka: SLSO19)
GPT120 output
Reserved
—
Reserved
100
P10.6
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
QSPI3_MTSRB
SCU_HWCFG5
P10.6
QSPI3 input (aka: MTSR3B)
SCU input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_11
IOM_REF2_10
—
GTM_TOUT
IOM reference input
Reserved
O2
O3
O4
O5
O6
QSPI3_MTSR
GPT120_T3OUT
CAN10_TXD
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
—
QSPI3 output (aka: MTSR3)
GPT120 output
CAN1 node 0 output (aka: TXDCAN10)
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
Reserved
O7
Data Sheet
2-145
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-43 Port 11 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
91
P11.2
I
A1+ /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P11.2
O0
O1
TOM0_8
TOM1_1
GTM_TOUT
TOM0_4N
TOM1_4N
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
Reserved
O2
O3
O4
O5
QSPI0_SLSO5
QSPI1_SLSO5
CCU61_COUT63
IOM_MON1_7
IOM_REF1_7
—
QSPI0 output (aka: SLSO05)
QSPI1 output (aka: SLSO15)
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
P11.3
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
QSPI1 input (aka: MRST1B)
General-purpose output
GTM_TOUT
92
I
A1+ /
HighZ /
VDDP3
QSPI1_MRSTB
P11.3
O0
O1
TOM0_10
TOM1_2
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
TOM1_5
—
O2
O3
QSPI1_MRST
IOM_MON2_1
IOM_REF2_1
ERAY0_TXDA
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
—
QSPI1 output (aka: MRST1)
IOM monitor input
IOM reference input
ERAY0 output
O4
O5
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-146
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-43 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
93
P11.6
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: SCLK1B)
General-purpose output
GTM_TOUT
QSPI1_SCLKB
P11.6
O0
O1
TOM0_11
TOM1_3
GTM_TOUT
TOM0_5N
TOM1_5N
ERAY0_TXENB
QSPI1_SCLK
ERAY0_TXENA
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
—
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
ERAY0 output
O2
O3
O4
O5
QSPI1 output (aka: SCLK1)
ERAY0 output
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT61
IOM_MON1_4
IOM_REF1_2
P11.8
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
QSPI1 input (aka: MTSR1C)
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
95
I
A1 /
HighZ /
VDDP3
QSPI1_MTSRC
P11.8
O0
O1
TOM0_4
TOM1_4
—
O2
O3
O4
O5
O6
O7
QSPI1_SLSO10
QSPI1_MTSR
—
QSPI1 output (aka: SLSO110)
QSPI1 output (aka: MTSR1)
Reserved
—
Reserved
—
Reserved
Data Sheet
2-147
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-43 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
94
P11.9
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI1 input (aka: MTSR1B)
ERAY0 input
QSPI1_MTSRB
ERAY0_RXDA1
P11.9
O0
O1
General-purpose output
GTM_TOUT
TOM0_12
TOM1_4
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
Reserved
TOM0_6
TOM1_6
—
O2
O3
O4
O5
QSPI1_MTSR
—
QSPI1 output (aka: MTSR1)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
—
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_COUT60
IOM_MON1_3
IOM_REF1_3
P11.10
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
ASCLIN1 input (aka: ARX1E)
ERAY0 input
96
I
A1+ /
HighZ /
VDDP3
ASCLIN1_RXE
ERAY0_RXDB1
SCU_REQ12
CAN12_RXDD
P11.10
SCU input
CAN1 node 2 input (aka: RXDCAN12D)
General-purpose output
GTM_TOUT
O0
O1
TOM0_13
TOM1_5
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
TOM0_6N
TOM1_6N
—
O2
O3
O4
O5
QSPI0_SLSO3
QSPI1_SLSO3
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
—
QSPI0 output (aka: SLSO03)
QSPI1 output (aka: SLSO13)
CCU61 output
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU60_CC62
IOM_MON1_0
IOM_REF1_4
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-148
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-43 Port 11 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
97
P11.11
I
A1+ /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P11.11
O0
O1
TOM0_14
TOM1_6
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
Reserved
TOM0_7N
TOM1_7N
—
O2
O3
O4
O5
QSPI0_SLSO4
QSPI1_SLSO4
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
ERAY0_TXENB
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
P11.12
QSPI0 output (aka: SLSO04)
QSPI1 output (aka: SLSO14)
CCU61 output
IOM monitor input
IOM reference input
ERAY0 output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
General-purpose input
General-purpose output
GTM_TOUT
98
I
A1+ /
HighZ /
VDDP3
P11.12
O0
O1
TOM0_15
TOM1_7
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
ASCLIN1 output (aka: ATX1)
IOM monitor input
TOM0_7
TOM1_7
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
GTM_CLK2
ERAY0_TXDB
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
SCU_EXTCLK1
CCU60_CC60
IOM_MON1_2
IOM_REF1_6
O2
IOM reference input
GTM output
O3
O4
O5
ERAY0 output
CCU61 output
IOM monitor input
IOM reference input
SCU output
O6
O7
CCU60 output
IOM monitor input
IOM reference input
Data Sheet
2-149
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-44 Port 13 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
87
P13.0
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CTRAPA
GPT120_T6EUDB
GPT120 input
P13.0
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
Reserved
TOM0_5
TOM1_5
TOM0_6N
TOM1_6N
—
O2
O3
O4
O5
O6
O7
I
QSPI2_SCLK
QSPI2 output (aka: SCLK2)
Reserved
—
—
Reserved
—
Reserved
CAN10_TXD
CAN1 node 0 output (aka: TXDCAN10)
General-purpose input
CCU60 input
88
P13.1
A1 /
HighZ /
VDDP3
CCU60_CCPOS0C
GPT120_T3INB
GPT120 input
CAN10_RXDB
CAN1 node 0 input (aka: RXDCAN10B)
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
Reserved
P13.1
TOM0_6
TOM1_6
TOM0_7
TOM1_7
—
O0
O1
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-150
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-44 Port 13 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
89
P13.2
I
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS1C
GPT120_T3EUDB
GPT120 input
GPT120_CAPINA
GPT120 input
P13.2
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
CAN1 node 1 output (aka: TXDCAN11)
Reserved
TOM0_7
TOM1_7
TOM0_7N
TOM1_7N
CAN11_TXD
O2
O3
O4
O5
O6
O7
I
—
—
Reserved
—
Reserved
—
Reserved
—
Reserved
90
P13.3
A1 /
HighZ /
VDDP3
General-purpose input
CCU60 input
CCU60_CCPOS2C
GPT120_T4INB
GPT120 input
CAN11_RXDB
CAN1 node 1 input (aka: RXDCAN11B)
General-purpose output
GTM_TOUT
P13.3
O0
O1
TOM0_8
TOM1_0
GTM_TOUT
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
TOM1_4
—
O2
O3
O4
O5
O6
O7
QSPI2_MTSR
QSPI2 output (aka: MTSR2)
Reserved
—
—
—
—
Reserved
Reserved
Reserved
Data Sheet
2-151
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-45 Port 14 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
81
P14.0
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
P14.0
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
ASCLIN0 output (aka: ATX0)
IOM monitor input
TOM1_6
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
ERAY0_TXDA
ERAY0_TXDB
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
ASCLIN0_SCLK
CCU60_COUT62
IOM_MON1_5
IOM_REF1_1
O2
IOM reference input
ERAY0 output
O3
O4
O5
ERAY0 output
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
ASCLIN0 output (aka: ASCLK0)
CCU60 output
O6
O7
IOM monitor input
IOM reference input
Data Sheet
2-152
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-45 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
82
P14.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
ASCLIN0_RXA
CAN1_RXDB
ERAY0_RXDA3
SCU_REQ15
ERAY0_RXDB3
SCU_EVRWUPA
P14.1
ASCLIN0 input (aka: ARX0A)
CAN node 1 input (aka: RXDCAN1B)
ERAY0 input
SCU input
ERAY0 input
AI
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM reference input
ASCLIN0 output (aka: ATX0)
IOM monitor input
IOM reference input
Reserved
TOM0_4
TOM1_4
TOM0_7
TOM1_7
IOM_REF1_14
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
—
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
CCU60_COUT63
IOM_MON1_6
IOM_REF1_0
P14.3
CCU60 output
IOM monitor input
IOM reference input
83
I
A1 / PU / General-purpose input
VDDP3
TIM0_6
GTM_TIN
SCU_REQ10
SCU_HWCFG3_BMI
P14.3
SCU input
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM reference input
Reserved
TOM0_6
TOM1_6
IOM_REF2_4
—
O2
O3
O4
O5
O6
O7
QSPI2_SLSO3
ASCLIN1_SLSO
—
QSPI2 output (aka: SLSO23)
ASCLIN1 output (aka: ASLSO1)
Reserved
—
Reserved
—
Reserved
Data Sheet
2-153
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-45 Port 14 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
84
P14.4
TIM0_7
P14.4
TOM0_7
TOM1_7
TOM0_7N
TOM1_7N
IOM_REF2_8
—
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM reference input
Reserved
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
85
P14.6
TIM0_1
A1+ / PU / General-purpose input
VDDP3
GTM_TIN
SCU_HWCFG0_DCLD
O
SCU input
QSPI0_MRSTD
QSPI0 input (aka: MRST0D)
General-purpose output
GTM_TOUT
P14.6
O0
O1
TOM0_1
TOM1_1
GTM_TOUT
IOM_REF2_14
IOM reference input
Reserved
—
O2
O3
O4
O5
O6
O7
QSPI2_SLSO2
QSPI2 output (aka: SLSO22)
Reserved
—
—
Reserved
ERAY0_TXENB
—
ERAY0 output
Reserved
Data Sheet
2-154
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-46 Port 15 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
76
P15.0
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P15.0
O0
O1
TOM1_3
TOM0_11
TOM0_7N
TOM1_7N
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI0_SLSO13
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
ASCLIN1 output (aka: ATX1)
IOM monitor input
O2
IOM reference input
QSPI0 output (aka: SLSO013)
Reserved
O3
O4
O5
CAN2_TXD
IOM_MON2_7
IOM_REF2_7
ASCLIN1_SCLK
—
CAN node 2 output (aka: TXDCAN2)
IOM monitor input
IOM reference input
ASCLIN1 output (aka: ASCLK1)
Reserved
O6
O7
I
77
P15.1
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1A)
QSPI2 input (aka: SLSI2B)
CAN node 2 input (aka: RXDCAN2A)
SCU input
ASCLIN1_RXA
QSPI2_SLSIB
CAN2_RXDA
SCU_REQ16
SCU_EVRWUPB
P15.1
AI
SCU input
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT
TOM1_4
TOM0_12
TOM0_4
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
ASCLIN1 output (aka: ATX1)
IOM monitor input
TOM1_4
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_SLSO5
—
O2
IOM reference input
QSPI2 output (aka: SLSO25)
Reserved
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-155
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-46 Port 15 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
78
P15.2
I
A1 /
HighZ /
VDDP3
General-purpose input
QSPI2 input (aka: MRST2E)
QSPI2 input (aka: SLSI2A)
QSPI2 input (aka: HSIC2INA)
General-purpose output
GTM_TOUT (= DTM5_OUT5)
GTM_TOUT
QSPI2_MRSTE
QSPI2_SLSIA
QSPI2_HSICINA
P15.2
O0
O1
TOM1_5
TOM0_13
TOM0_4N
TOM1_4N
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
QSPI2_SLSO0
—
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
ASCLIN0 output (aka: ATX0)
IOM monitor input
O2
IOM reference input
O3
O4
O5
QSPI2 output (aka: SLSO20)
Reserved
CAN1_TXD
IOM_MON2_6
IOM_REF2_6
ASCLIN0_SCLK
—
CAN node 1 output (aka: TXDCAN1)
IOM monitor input
IOM reference input
O6
O7
I
ASCLIN0 output (aka: ASCLK0)
Reserved
79
P15.3
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN0 input (aka: ARX0B)
QSPI2 input (aka: SCLK2A)
QSPI2 input (aka: HSIC2INB)
CAN node 1 input (aka: RXDCAN1A)
General-purpose output
GTM_TOUT (= DTM5_OUT6)
GTM_TOUT
ASCLIN0_RXB
QSPI2_SCLKA
QSPI2_HSICINB
CAN1_RXDA
P15.3
O0
O1
TOM1_6
TOM0_14
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
ASCLIN0 output (aka: ATX0)
IOM monitor input
TOM1_5
ASCLIN0_TX
IOM_MON2_12
IOM_REF2_12
QSPI2_SCLK
—
O2
IOM reference input
O3
O4
O5
O6
O7
QSPI2 output (aka: SCLK2)
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-156
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-46 Port 15 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
80
P15.5
I
A1 /
HighZ /
VDDP3
General-purpose input
ASCLIN1 input (aka: ARX1B)
QSPI2 input (aka: MTSR2A)
SCU input
ASCLIN1_RXB
QSPI2_MTSRA
SCU_REQ13
P15.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
TOM0_5N
TOM1_5N
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI2_MTSR
—
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI2 output (aka: MTSR2)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
CCU60_CC61
IOM_MON1_1
IOM_REF1_5
CCU60 output
IOM monitor input
IOM reference input
Table 2-47 Port 20 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
64
P20.2
I
InputOnly General-purpose input
/ PU /
VDDP3
TESTMODE
Factory Test Mode Enable
Data Sheet
2-157
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-47 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
69
P20.8
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_7
P20.8
O0
O1
General-purpose output
GTM_TOUT (= DTM5_OUT7)
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
IOM monitor input
TOM1_7
TOM0_7
TOM0_4
TOM1_4
IOM_MON2_8
ASCLIN1_SLSO
QSPI0_SLSO0
QSPI1_SLSO0
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
SCU_WDT0LCK
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
P20.9
O2
O3
O4
O5
ASCLIN1 output (aka: ASLSO1)
QSPI0 output (aka: SLSO00)
QSPI1 output (aka: SLSO10)
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
SCU output
O6
O7
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
ASCLIN1 input (aka: ARX1C)
QSPI0 input (aka: SLSI0B)
SCU input
70
I
A1 /
HighZ /
VDDP3
ASCLIN1_RXC
QSPI0_SLSIB
SCU_REQ11
CAN12_RXDE
P20.9
CAN1 node 2 input (aka: RXDCAN12E)
General-purpose output
GTM_TOUT
O0
O1
TOM1_13
TOM0_13
GTM_TOUT
TOM0_4N
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
IOM monitor input
TOM1_4N
IOM_MON2_11
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SLSO1
QSPI1_SLSO1
—
QSPI0 output (aka: SLSO01)
QSPI1 output (aka: SLSO11)
Reserved
SCU_WDTSLCK
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
SCU output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-158
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-47 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
71
P20.10
I
A1 /
HighZ /
VDDP3
General-purpose input
General-purpose output
GTM_TOUT
P20.10
O0
O1
TOM1_14
TOM0_14
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
TOM1_5
IOM_MON2_14
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
QSPI0_SLSO6
QSPI2_SLSO7
CAN12_TXD
ASCLIN1_SCLK
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
P20.11
O2
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
QSPI0 output (aka: SLSO06)
QSPI2 output (aka: SLSO27)
CAN1 node 2 output (aka: TXDCAN12)
ASCLIN1 output (aka: ASCLK1)
CCU61 output
O3
O4
O5
O6
O7
IOM monitor input
IOM reference input
General-purpose input
QSPI0 input (aka: SCLK0A)
General-purpose output
GTM_TOUT
72
I
A1+ /
HighZ /
VDDP3
QSPI0_SCLKA
P20.11
O0
O1
TOM1_15
TOM0_15
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM monitor input
TOM1_5N
IOM_MON2_15
—
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SCLK
—
QSPI0 output (aka: SCLK0)
Reserved
CAN11_TXD
—
CAN1 node 1 output (aka: TXDCAN11)
Reserved
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-159
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-47 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
73
P20.12
I
A1 /
HighZ /
VDDP3
General-purpose input
QSPI0 input (aka: MRST0A)
CAN1 node 1 input (aka: RXDCAN11H)
IOM pad input
QSPI0_MRSTA
CAN11_RXDH
IOM_PIN13
P20.12
O0
O1
General-purpose output
GTM_TOUT
TOM1_0
TOM0_8
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
TOM1_6
IOM_MON0_13
—
O2
O3
Reserved
QSPI0_MRST
IOM_MON2_0
IOM_REF2_0
QSPI0_MTSR
—
QSPI0 output (aka: MRST0)
IOM monitor input
IOM reference input
QSPI0 output (aka: MTSR0)
Reserved
O4
O5
O6
O7
—
Reserved
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
P20.13
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
QSPI0 input (aka: SLSI0A)
CAN1 node 2 input (aka: RXDCAN12H)
IOM pad input
74
I
A1+ /
HighZ /
VDDP3
QSPI0_SLSIA
CAN12_RXDH
IOM_PIN14
P20.13
O0
O1
General-purpose output
GTM_TOUT
TOM1_1
TOM0_9
GTM_TOUT
TOM0_6N
TOM1_6N
IOM_MON0_14
—
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM monitor input
O2
O3
O4
O5
O6
O7
Reserved
QSPI0_SLSO2
QSPI1_SLSO2
QSPI0_SCLK
—
QSPI0 output (aka: SLSO02)
QSPI1 output (aka: SLSO12)
QSPI0 output (aka: SCLK0)
Reserved
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-160
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-47 Port 20 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
75
P20.14
I
A1+ /
HighZ /
VDDP3
General-purpose input
QSPI0 input (aka: MTSR0A)
IOM pad input
QSPI0_MTSRA
IOM_PIN15
P20.14
O0
O1
General-purpose output
GTM_TOUT
TOM1_2
TOM0_10
TOM0_7
TOM1_7
IOM_MON0_15
—
GTM_TOUT
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
O2
O3
O4
O5
O6
O7
QSPI0_MTSR
—
QSPI0 output (aka: MTSR0)
Reserved
CAN12_TXD
—
CAN1 node 2 output (aka: TXDCAN12)
Reserved
—
Reserved
Table 2-48 Port 21 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
56
P21.2
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_0
SCU_EMGSTOPB
SCU input
P21.2
TOM0_0
TOM1_0
TOM0_4
TOM1_4
—
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-161
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-48 Port 21 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
57
P21.3
TIM0_1
P21.3
TOM0_1
TOM1_1
TOM0_4N
TOM1_4N
—
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT4_N)
GTM_TOUT (= DTM5_OUT4_N)
Reserved
O2
O3
O4
O5
O6
O7
I
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
58
P21.4
TIM0_2
P21.4
TOM0_2
TOM1_2
TOM0_5
TOM1_5
—
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
O0
O1
General-purpose output
GTM_TOUT
GTM_TOUT
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
O2
O3
O4
O5
O6
O7
—
Reserved
—
Reserved
—
Reserved
—
Reserved
—
Reserved
Data Sheet
2-162
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-48 Port 21 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
59
P21.6
I
A1 / PU / General-purpose input
VDDP3
TIM0_4
GTM_TIN
TDI
OCDS input
OCDS input
OCDS_TGI2
GPT120_T5EUDA
GPT120 input
P21.6
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
Reserved
TOM0_4
TOM1_4
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
GPT120_T3OUT
OCDS_TGO2
P21.7
GPT120 output
OCDS
61
I
A1+ / PU / General-purpose input
VDDP3
TIM0_5
GTM_TIN
OCDS_DAP2
OCDS_TGI3
GPT120_T5INA
P21.7
OCDS input
OCDS input
GPT120 input
General-purpose output
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
Reserved
O0
O1
TOM0_5
TOM1_5
—
O2
O3
O4
O5
O6
O7
O
—
Reserved
—
Reserved
—
Reserved
—
Reserved
GPT120_T6OUT
OCDS_TGO3
OCDS_DAP2
TDO
GPT120 output
OCDS
O
OCDS Output
JTAG Output
O
Data Sheet
2-163
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-49 Port 23 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
51
P23.1
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_6
P23.1
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT
TOM0_6
TOM0_15
ASCLIN1_RTS
QSPI3_SLSO13
GTM_CLK0
SCU_EXTCLK1
SCU_EXTCLK0
—
O2
O3
O4
O5
O6
O7
ASCLIN1 output (aka: ARTS1)
QSPI3 output (aka: SLSO313)
GTM output
SCU output
SCU output
Reserved
Table 2-50 Port 33 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
41
P33.5
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
CCU61_CCPOS2C
GPT120_T4EUDB
IOM_PIN5
CCU61 input
GPT120 input
IOM pad input
P33.5
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_1
GTM_TOUT
TOM0_5
GTM_TOUT (= DTM1_OUT5)
GTM_TOUT (= DTM5_OUT5)
IOM monitor input
QSPI0 output (aka: SLSO07)
QSPI1 output (aka: SLSO17)
Reserved
TOM1_5
IOM_MON0_5
QSPI0_SLSO7
QSPI1_SLSO7
—
O2
O3
O4
O5
O6
O7
VADC_EMUX11
VADC_G0BFL1
CCU61_CC60
IOM_MON1_8
IOM_REF1_13
VADC output
VADC output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-164
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-50 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
42
P33.6
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_2
ASCLIN1_RXF
CCU61_CCPOS1C
GPT120_T2EUDB
CAN10_RXDH
IOM_PIN6
ASCLIN1 input (aka: ARX1F)
CCU61 input
GPT120 input
CAN1 node 0 input (aka: RXDCAN10H)
IOM pad input
P33.6
O0
O1
General-purpose output
GTM_TOUT
TOM0_2
TOM1_2
GTM_TOUT
TOM0_5N
GTM_TOUT (= DTM1_OUT5_N)
GTM_TOUT (= DTM5_OUT5_N)
IOM monitor input
Reserved
TOM1_5N
IOM_MON0_6
—
O2
O3
O4
—
Reserved
ASCLIN1_TX
IOM_MON2_13
IOM_REF2_13
VADC_EMUX10
VADC_G0BFL2
CCU61_CC61
IOM_MON1_9
IOM_REF1_12
HSM_HSM1
ASCLIN1 output (aka: ATX1)
IOM monitor input
IOM reference input
VADC output
O5
O6
O7
VADC output
CCU61 output
IOM monitor input
IOM reference input
HSM output
O
Data Sheet
2-165
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-50 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
43
P33.7
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_3
CAN0_RXDE
SCU_REQ8
CCU61_CCPOS0C
GPT120_T2INB
IOM_PIN7
P33.7
CAN node 0 input (aka: RXDCAN0E)
SCU input
CCU61 input
GPT120 input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_3
TOM1_3
GTM_TOUT
TOM0_6
GTM_TOUT (= DTM1_OUT6)
GTM_TOUT (= DTM5_OUT6)
IOM monitor input
Reserved
TOM1_6
IOM_MON0_7
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO7
—
QSPI3 output (aka: SLSO37)
Reserved
CAN10_TXD
VADC_G0BFL3
CCU61_COUT60
IOM_MON1_11
IOM_REF1_10
HSM_HSM2
CAN1 node 0 output (aka: TXDCAN10)
VADC output
CCU61 output
IOM monitor input
IOM reference input
HSM output
O
Data Sheet
2-166
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-50 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
44
P33.8
I
A1+ /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_4
SCU_EMGSTOPA
IOM_PIN8
P33.8
SCU input
IOM pad input
O0
O1
General-purpose output
GTM_TOUT (= DTM1_OUT4)
GTM_TOUT (= DTM5_OUT4)
GTM_TOUT (= DTM1_OUT6_N)
GTM_TOUT (= DTM5_OUT6_N)
IOM monitor input
Reserved
TOM0_4
TOM1_4
TOM0_6N
TOM1_6N
IOM_MON0_8
—
O2
O3
O4
O5
QSPI3_SLSO2
—
QSPI3 output (aka: SLSO32)
Reserved
CAN0_TXD
IOM_MON2_5
IOM_REF2_5
—
CAN node 0 output (aka: TXDCAN0)
IOM monitor input
IOM reference input
Reserved
O6
O7
CCU61_COUT62
IOM_MON1_13
IOM_REF1_8
SMU_FSP
CCU61 output
IOM monitor input
IOM reference input
SMU
O
Data Sheet
2-167
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-50 Port 33 Functions (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
45
P33.9
I
A1 /
HighZ /
VDDP3
General-purpose input
GTM_TIN
TIM0_1
QSPI3_HSICINA
IOM_PIN9
P33.9
QSPI3 input (aka: HSIC3INA)
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_1
TOM1_1
GTM_TOUT
TOM0_7
GTM_TOUT (= DTM1_OUT7)
GTM_TOUT (= DTM5_OUT7)
IOM monitor input
Reserved
TOM1_7
IOM_MON0_9
—
O2
O3
O4
O5
O6
O7
QSPI3_SLSO1
—
QSPI3 output (aka: SLSO31)
Reserved
—
Reserved
—
Reserved
CCU61_CC62
IOM_MON1_10
IOM_REF1_11
P33.10
CCU61 output
IOM monitor input
IOM reference input
General-purpose input
GTM_TIN
46
I
A1+ /
HighZ /
VDDP3
TIM0_0
QSPI3_SLSIC
QSPI3_HSICINB
IOM_PIN10
P33.10
QSPI3 input (aka: SLSI3C)
QSPI3 input (aka: HSIC3INB)
IOM pad input
O0
O1
General-purpose output
GTM_TOUT
TOM0_0
TOM1_0
GTM_TOUT
TOM0_7N
TOM1_7N
IOM_MON0_10
QSPI1_SLSO6
QSPI3_SLSO11
ASCLIN1_SLSO
GTM_CLK1
SCU_EXTCLK1
CCU61_COUT61
IOM_MON1_12
IOM_REF1_9
GTM_TOUT (= DTM1_OUT7_N)
GTM_TOUT (= DTM5_OUT7_N)
IOM monitor input
QSPI1 output (aka: SLSO16)
QSPI3 output (aka: SLSO311)
ASCLIN1 output (aka: ASLSO1)
GTM output
O2
O3
O4
O5
O6
O7
SCU output
CCU61 output
IOM monitor input
IOM reference input
Data Sheet
2-168
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-51 Port 40 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
40
P40.0
I
S / VDDM General-purpose input
VADC input channel 0 of group 0
S / VDDM General-purpose input
VADC input channel 1 of group 0
VADCG0_0
P40.1
AI
I
39
38
VADCG0_1
AI
(with multiplexer diagnostics)
P40.2
I
S / VDDM General-purpose input
VADCG0_2
AI
VADC input channel 2 of group 0
(with multiplexer diagnostics)
37
36
35
34
29
P40.3
I
S / VDDM General-purpose input
VADC input channel 3 of group 0
S / VDDM General-purpose input
VADC input channel 4 of group 0
S / VDDM General-purpose input
VADC input channel 5 of group 0
S / VDDM General-purpose input
VADC input channel 6 of group 0
S / VDDM General-purpose input
VADCG0_3
P40.4
AI
I
VADCG0_4
P40.5
AI
I
VADCG0_5
P40.6
AI
I
VADCG0_6
P40.7
AI
I
VADCG0_7
AI
VADC input channel 7 of group 0
(with pull down diagnostics)
28
27
P40.8
I
S / VDDM General-purpose input
VADC input channel 8 of group 0
S / VDDM General-purpose input
VADCG0_8
P40.9
AI
I
VADCG0_9
AI
VADC input channel 9 of group 0
(with multiplexer diagnostics)
26
25
P40.10
I
S / VDDM General-purpose input
VADCG0_10
AI
VADC input channel 10 of group 0
(with multiplexer diagnostics)
P40.11
I
S / VDDM General-purpose input
SENT input
SENT_SENT0A
CCU60_CCPOS0D
VADCG0_11
CCU60 input
AI
VADC input channel 11 of group 0
Data Sheet
2-169
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-52 Port 41 Functions
Pin
Symbol
Ctrl. Buffer
Type
Function
24
P41.0
I
S / VDDM General-purpose input
SENT input
SENT_SENT1A
CCU60_CCPOS1B
VADCG1_0
P41.1
CCU60 input
AI
I
VADC input channel 0 of group 1
S / VDDM General-purpose input
VADC input channel 1 of group 1
(with multiplexer diagnostics)
S / VDDM General-purpose input
SENT input
23
22
VADCG1_1
AI
P41.2
I
SENT_SENT2A
CCU61_CCPOS1B
VADCG1_2
CCU61 input
AI
I
VADC input channel 2 of group 1
(with multiplexer diagnostics)
21
P41.3
S / VDDM General-purpose input
SENT input
SENT_SENT3A
CCU61_CCPOS1D
VADCG1_3
CCU61 input
AI
VADC input channel 3 of group 1
(with pull down diagnostics)
20
19
18
17
16
15
P41.4
I
S / VDDM General-purpose input
VADC input channel 4 of group 1
S / VDDM General-purpose input
VADC input channel 5 of group 1
S / VDDM General-purpose input
VADC input channel 6 of group 1
S / VDDM General-purpose input
VADC input channel 7 of group 1
S / VDDM General-purpose input
VADC input channel 8 of group 1
S / VDDM General-purpose input
VADCG1_4
P41.5
AI
I
VADCG1_5
P41.6
AI
I
VADCG1_6
P41.7
AI
I
VADCG1_7
P41.8
AI
I
VADCG1_8
P41.9
AI
I
VADCG1_9
AI
VADC input channel 9 of group 1
(with multiplexer diagnostics)
14
13
P41.10
I
S / VDDM General-purpose input
VADCG1_10
AI
VADC input channel 10 of group 1
(with multiplexer diagnostics)
P41.11
I
S / VDDM General-purpose input
VADCG1_11
AI
VADC input channel 11 of group 1
Data Sheet
2-170
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-53 System I/O
Pin
Symbol
Ctrl. Buffer
Type
Function
53
54
60
XTAL1
XTAL2
TMS/DAP1
DAP1
I
VDDP3
VDDP3
Main Oscillator/PLL/Clock Generator Input
Main Oscillator/PLL/Clock Generator Output
O
I
A1+ / PD / Debug Interface
VDDP3
I/O
I
Device Access Port LIne 1
62
63
TRST
InputOnly JTAG Module Reset/Enable Input
/ PD /
VDDP3
TCK/DAP0
DAP0
I
I
InputOnly OCDS input
/ PD /
VDDP3
Device Access Port LIne 0
65
66
ESR1
I/O
A1+ / PU / SCU input
VDDP3
EVRWUP
PORST
I
I
EVR Wakeup Pin
InputOnly Power On Reset
/ PD /
Additional strong PD in case of power fail.
VDDP3
67
ESR0
I/O
I
A1+/OD / SCU input/output
VDDP3
EVRWUP
EVR Wakeup Pin
Table 2-54 Supply
Pin
Symbol
Ctrl. Buffer
Type
Function
30
31
86
VAGND
VAREF
VDDP3
I
I
I
—
—
—
Negative Analog Reference Voltage 0
Positive Analog Reference Voltage 0
Digital I/O Power Supply (3.3V)
This pin supplies also the Flash 3.3V.
47
48
VDDP3
VDD
I
I
—
—
Digital I/O Power Supply (3.3V)
Digital Core Power Supply (1.3V)
Output of EVR13.
52
VDD
I
—
Digital Core Power Supply (1.3V)
This pin supplies also the main XTAL Oscillator/PLL (1.3V).
A higher decoupling capacitor is therefore recommended to
the VSS pin for better noise immunity.
55
VDDP3
I
—
Digital I/O Power Supply (3.3V)
This pin supplies also the main XTAL Oscillator/PLL (3.3V).
A higher decoupling capacitor is therefore recommended to
the VSS pin for better noise immunity.
33
12
11
VDDM
VDDP3
VDD
I
I
I
—
—
—
ADC Power Supply (5.0V)
Digital I/O Power Supply (3.3V)
Digital Core Power Supply (1.3V)
Data Sheet
2-171
V 1.0 2017-03
TC233 / TC234 / TC237
Package and Pinning DefinitionsPG-TQFP-100-23 Package Variant Pin
Table 2-54 Supply (cont’d)
Pin
Symbol
Ctrl. Buffer
Type
Function
68
32
VDD
I
I
—
—
Digital Core Power Supply (1.3V)
Analog Ground for VDDM
VSSM
2.3.2
Pull-Up/Pull-Down Reset Behavior of the Pins
Table 2-55 List of Pull-Up/Pull-Down Reset Behavior of the Pins
Pins
PORST = 0
PORST = 1
all GPIOs
High-Z
TDI, TESTMODE
PORST1)
Pull-up
Pull-down with IPORST relevant
Pull-down with IPDLI relevant
TRST, TCK, TMS
ESR0
Pull-down
The open-drain driver is used to
drive low.2)
Pull-up3)
ESR1
Pull-up3)
Pull-up
Pull-up
P14.2, P14.3, P14.6
P21.7 / TDO
High-Z/Pull-up4)
1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation.
2) Valid additionally after deactivation of PORST until the internal reset phase has finished. See the SCU chapter for details.
3) See the SCU_IOCR register description.
4) Depends on JTAG/DAP selection with TRST.
Data Sheet
2-172
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationParameter Interpretation
3
Electrical Specification
3.1
Parameter Interpretation
The parameters listed in this section partly represent the characteristics of the TC233 / TC234 / TC237 and partly
its requirements on the system. To aid interpreting the parameters easily when evaluating them for a design, they
are marked with an two-letter abbreviation in column “Symbol”:
•
CC
Such parameters indicate Controller Characteristics which are a distinctive feature of the TC233 / TC234 /
TC237 and must be regarded for a system design.
•
SR
Such parameters indicate System Requirements which must provided by the microcontroller system in which
the TC233 / TC234 / TC237 designed in.
Data Sheet
3-173
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationAbsolute Maximum Ratings
3.2
Absolute Maximum Ratings
Stresses above the values listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those
indicated in the Operational Conditions of this specification is not implied. Exposure to absolute maximum rating
conditions may affect device reliability.
Table 3-1 Absolute Maximum Ratings
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Storage Temperature
T
ST SR
-65
-
170
°C
upto 65h @ TJ =
150°C; upto 15h @ TJ
= 170°C
Voltage at VDD power supply
pins with respect to VSS
V
DD SR
-
-
-
-
-
1.9
4.43
7.0
V
V
V
V
1)
Voltage at VDDP3 power supply VDDP3 SR
pins with respect to VSS
-
Voltage at VDDM power supply
pin with respect to VSS
V
DDM SR
-
Voltage on all analog and class VIN SR
-0.5
7.0
S input pins with respect to VSS
2)
Voltage on all other input pins VIN SR
with respect to VSS
-0.5
-
min(
VDDP3 +
V
Whatever is lower
1)2)
0.6 , 4.23
)
Input current on any pin during IIN SR
-10
-
-
10
mA
mA
overload condition 3)
Absolute maximum sum of all ΣIIN SR
input circuit currents during
overload condition 3)
-100
100
1) Valid for cumulated for up to 2.8h and pulse forms following a power supply switch on phase, where the rise and fall times
are releated to the system capacities and coils.
2) Voltages below VINmin have no Impact to the device reliabiltiy as Long as the times and currents defined in section Pin
Reliability in Overload for the affected pad(s) are not violated.
3) This parameter is an Absolute Maximum Rating. Exposure to Absolute Maximum Ratings for extended periods of time may
damage the device.
Data Sheet
3-174
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPin Reliability in Overload
3.3
Pin Reliability in Overload
When receiving signals from higher voltage devices, low-voltage devices experience overload currents and
voltages that go beyond their own IO power supplies specification.
The following table defines overload conditions that will not cause any negative reliability impact if all the following
conditions are met:
•
•
full operation life-time is not exceeded
Operating Conditions are met for
–
–
pad supply levels
temperature
•
Parameters defined in Absolute Maximum Ratings are not violated
If a pin current is out of the Operating Conditions but within the overload parameters, then the parameters
functionality of this pin as stated in the Operating Conditions can no longer be guaranteed. Operation is still
possible in most cases but with relaxed parameters.
Note:An overload condition on one or more pins does not require a reset.
Table 3-2 Overload Parameters
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Input current on any digital pin IIN
-5
-
5
mA
during overload condition
Input current on analog input
pin during overload condition
IINANA
-1
-5
-
-
3
5
mA
mA
limited to 60h over
lifetime
Absolute sum of all ADC inputs IINSCA
during overload condition
-20
-
-
20
mA
mA
Absolute maximum sum of all ΣIINS
input circuit currents during
overload condition
-100
100
Inactive device pin current
during overload condtion 1)
IID
-1
-
-
-
1
mA
mA
All power supply
voltages VDDx = 0
Sum of all inactive device pin IIDS
-100
-
100
currents 1)
Overload coupling factor for
digital inputs, negative 2)
KOVDN CC
KOVDP CC
KOVAN CC
1.5*10-3
Overload injected on
GPIO pad and
affecting neighbor
GPIO pad
Overload coupling factor for
digital inputs, positive 2)
-
-
1*10-5
Overload injected on
GPIO pad and
affecting neighbor
GPIO pad
Overload coupling factor for
analog inputs, negative
-
-
-
-
1*10-3
1*10-4
Analog Inputs overlaid
with pull down
diagnostics
else
Data Sheet
3-175
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPin Reliability in Overload
Table 3-2 Overload Parameters (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Overload coupling factor for
analog inputs, positive
KOVAP CC
-
-
1*10-4
Analog Inputs overlaid
with pull down
diagnostics
-
-
1*10-5
else
1) Limitations for time and supply levels specified in this section are not valid for this parameter.
2) Overload is measured as increase of pad leakage caused by injection on neighbor pad.
Table 3-3 PN-Junction Characteristics for positive Overload
Pad Type
A1 / A1+
D
IIN = 3 mA
IIN = 5 mA
UIN = VDDP3 + 0.5 V
UIN = VDDM + 0.75 V
UIN = VDDP3 + 0.6 V
-
Table 3-4 PN-Junction Characteristics for negative Overload
Pad Type
A1 / A1+
D
IIN = -3 mA
IIN = -5 mA
UIN = VSS - 0.5 V
UIN = VSS - 0.75 V
UIN = VSS - 0.6 V
-
Data Sheet
3-176
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationOperating Conditions
3.4
Operating Conditions
The following operating conditions must not be exceeded in order to ensure correct operation and reliability of the
TC233 / TC234 / TC237. All parameters specified in the following tables refer to these operating conditions, unless
otherwise noticed.
Digital supply voltages applied to the TC233 / TC234 / TC237 must be static regulated voltages.
All parameters specified in the following tables refer to these operating conditions (see table below), unless
otherwise noticed in the Note / Test Condition column.
Table 3-5 Operating Conditions
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
200
SRI frequency
f
f
f
f
f
SRI SR
MAX SR
CPU0 SR
PLL SR
-
-
-
-
MHz
MHz
133
vaild only for SAK-
TC233LC-24F133F
Max System Frequency
CPU0 Frequency
-
-
-
-
200
133
MHz
MHz
vaild only for SAK-
TC233LC-24F133F
-
-
-
-
200
133
MHz
MHz
vaild only for SAK-
TC233LC-24F133F
PLL output frequency
PLL_ERAY output frequency
20
-
-
-
200
133
MHz
MHz
vaild only for SAK-
TC233LC-24F133F
PLLERAY SR 20
-
-
-
160
80
MHz
MHz
vaild only for SAK-
TC233LC-24F133F
SPB frequency
f
f
SPB SR
-
-
-
-
-
-
100
200
133
MHz
MHz
MHz
ASCLIN fast frequency
ASCLINF SR
vaild only for SAK-
TC233LC-24F133F
ASCLIN slow frequency
Baud2 frequency
f
f
ASCLINS SR
BAUD2 SR
-
-
-
-
-
-
100
200
133
MHz
MHz
MHz
vaild only for SAK-
TC233LC-24F133F
FSI2 frequency
f
FSI2 SR
-
-
-
-
200
133
MHz
MHz
vaild only for SAK-
TC233LC-24F133F
FSI frequency
f
f
f
f
f
f
FSI SR
-
-
-
-
-
-
-
-
-
-
-
-
100
100
100
80
MHz
MHz
MHz
MHz
MHz
MHz
GTM frequency
STM frequency
ERAY frequency
BBB frequency
MultiCAN frequency
GTM SR
STM SR
ERAY SR
BBB SR
CAN SR
100
100
Data Sheet
3-177
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationOperating Conditions
Table 3-5 Operating Conditions (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Absolute sum of short circuit
currents of the device
ΣISC_D SR
TA SR
-
-
100
mA
°C
°C
°C
°C
V
Ambient Temperature
Junction Temperature
Core Supply Voltage 1)
-40
-40
-40
-40
1.17
-
125
valid for all SAK
products
-
150
valid for all SAL
products
TJ SR
-
150
valid for all SAK
products
-
165
valid for all SAL
products
V
DD SR
1.3
1.43 2)
Only required if
externally supplied
ADC analog supply voltage
Digital ground voltage
V
V
V
DDM SR
SS SR
2.97
0
5.0
5.5 3)
V
V
V
V
-
-
Analog ground voltage for VDDM
SSM CC
-0.1
0
-
0.1
-
Voltage to ensure defined pad VDDPPA CC 0.72
states 4)
Digital supply voltage for GPIO VDDP3 SR
2.97
3.3
3.63
V
pads and EVR 5)
1) No external inductive load permissible if EVR is used. All VDD pins shall be connected together externally on the PCB.
2) Voltage overshoot to 1.69V is permissible, provided the duration is less than 2h cumulated. Reduced ADC accuracy and
leakage is increased.
3) Voltage overshoot to 6.5V is permissible, provided the duration is less than 2h cumulated. Reduced ADC accuracy and
leakage is increased.
4) This parameter is valid under the assumption the PORST signal is constantly at low level during the power-up/power-down
of VDDP3
.
5) All VDDP3 pins shall be connected together externally on the PCB.
Data Sheet
3-178
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical Specification3.3 V Pads
3.5
3.3 V Pads
Table 3-6 Standard Pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Pin capacitance (digital
inputs/outputs)
CIO CC
-
6
10
pF
ns
Spike filter always blocked
pulse duration
t
SF1 CC
-
-
80
-
PORST only
PORST only
Spike filter pass-through pulse tSF2 CC
220
-
ns
duration
PORST pad output current 1)
I
PORST CC 10.1
-
-
mA
V
DDP3 = 3.0V; VPORST
=
0.9V; TJ = 150°C;
1) Pull-down with IPORST relevant is always activated when a primary supply monitor detects a violation.
Table 3-7 Class_A1
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
100
-
Input frequency
fIN SR
-
-
-
MHz
V
Input Hysteresis A1
HYSA1 CC 0.1 *
else
VDDP3
Input Leakage Current Class
A1
I
OZA1 CC
-400
-475
-
-
400
475
nA
nA
(0.1*VDDP3) < VIN <
(0.9*VDDP3
)
(0.1*VDDP3) < VIN <
(0.9*VDDP3); only vaild
for P0.0
-800
-
-
800
|120|
-
nA
else
Pull-down current class A1
pads
I
I
PDLA1 CC
-
µA
VIHmin
VILmax
VIHmin
VILmax
|15|
|15|
-
-
µA
Pull-up current class A1 pads
PUHA1 CC
-
-
µA
-
|120|
200
µA
On-Resistance of the A1 pad, RDSONA1M
medium driver CC
On-Resistance of the class A1 RDSONA1W
50
125
Ohm
I
OH=2mA; IOL=2mA
250
500
800
-
Ohm
V
I
OH=0.5mA; IOL=0.5mA
pad, weak driver
CC
Input high voltage class A1
pads
V
IHA1 CC
ILA1 CC
0.7 *
VDDP3
-
-
CMOS
CMOS
Input low voltage, class A1
pads
V
-
0.3 *
VDDP3
V
Data Sheet
3-179
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical Specification3.3 V Pads
Table 3-7 Class_A1 (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Rise/fall time 1)
t
A1 CC
-
-
10+0.4 * ns
CL≤100pF; pin out
CL
driver=medium
-
-
30+2.0 * ns
CL≤100pF; pin out
CL
driver=weak
1) Rise / fall times are defined 10% - 90% of VDDP3
.
Table 3-8 Class_A1+
Parameter
Symbol
Values
Unit
Note / Test Condition
Min.
-
Typ.
Max.
75
Input frequency
fIN SR
-
-
MHz
µA
Input Leakage Current Class
A1+
I
OZA1+ CC
-1
1
(0.1*VDDP3) < VIN <
(0.9*VDDP3
)
-2
-
-
2
µA
else
Pull-down current class A1+
pads
I
PDLA1+ CC
-
|120|
-
µA
VIHmin
|15|
-
µA
VILmax
VIHmin
Pull-up current class A1+ pads IPUHA1+ CC |15|
-
-
µA
-
-
|120|
200
µA
VILmax
On-Resistance of the A1+ pad, RDSONA1+M 50
125
Ohm
I
I
I
OH=2mA; IOL=2mA
medium driver
On-Resistance of the A1+ pad, RDSONA1+S
strong driver CC
On-Resistance of the A1+ pad, RDSONA1+W 250
CC
10
40
65
800
-
Ohm
Ohm
V
OH=6mA; IOL=6mA
500
OH=0.5mA; IOL=0.5mA
weak driver
CC
Input high voltage, Class A1+
pads
V
IHA1+ CC
ILA1+ CC
0.7 *
VDDP3
-
-
-
CMOS
CMOS
Input low voltage Class A1+
pads
Rise/fall time 1)
V
-
-
0.3 *
VDDP3
V
t
A1+ CC
8+0.14 * ns
CL
CL≤100pF; edge=slow
; pin out driver=strong
(sw)
-
-
1+0.14 * ns
CL
CL≤100pF; edge=soft ;
pin out driver=strong
(sf)
-
-
-
-
-
10+0.4 * ns
CL
CL≤100pF; pin out
driver=medium
30+2.0 * ns
CL
CL≤100pF; pin out
driver=weak
Input Hysteresis A1+
HYSA1+
CC
0.1 *
-
V
else
VDDP3
1) Rise / fall times are defined 10% - 90% of VDDP3
.
Data Sheet
3-180
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical Specification3.3 V Pads
Table 3-9 Class_S
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
-
Max.
75
Input frequency
Input Hysteresis for S pad 1)
fIN SR
-
-
-
-
-
-
-
MHz
V
HYSS CC
0.3
|11|
-
-
Pull-up current for S pad
I
PUHS CC
PDLS CC
-
µA
µA
µA
µA
nA
VIHmin
VILmax
VIHmin
VILmax
|120|
|120|
-
Pull-down current for S pad
I
-
|30|
-350
Input Leakage current Class S IOZS CC
350
Analog Inputs overlaid
with pull down
diagnosis
-150
-
1.39 3)
-
-
-
-
150
3.8 2)
-
nA
V
else
Input voltage high for S pad
Input voltage low for S pad
V
V
IHS SR
ILS SR
V
Input low threshold variation for VILSD SR
-50
50
mV
max. variation of 1ms;
VDDM=constant
S pad 4)
Input capacitance for S pad
Pad set-up time for S pad
C
INS CC
-
-
-
-
10
pF
ns
t
SETS CC
100
1) Hysteresis is implemented to avoid metastable states and switching due to internal ground bounce. It can't be guaranteed
that it suppresses switching due to external system noise.
2) VILx = 0.65 * VDDM
3) VILx = 0.41 * VDDM
4) VILSD is implemented to ensure J2716 specification. For details of dedicated pins please see AP32286 for details.
Table 3-10 Class I
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
100
-
Input frequency
Input Hysteresis for I pad 1)
fIN SR
-
-
-
MHz
V
HYSI CC
0.1 *
VDDP3
Pull-up current for I pad
I
I
PUHI CC
PDLI CC
|15|
-
-
-
-
-
-
-
µA
µA
µA
µA
nA
VIHImin
|120|
|120|
-
VILImax
Pull-down current for I pad
-
VIHImin
|15|
-150
VILImax
Input Leakage Current for I pad IOZI CC
150
(0.1*VDDP3) < VIN <
(0.9*VDDP3
)
-500
-
-
350
-
nA
V
else
Input high voltage for I pad
V
IHI SR
0.7 *
CMOS
VDDP3
Data Sheet
3-181
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical Specification3.3 V Pads
Table 3-10 Class I (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Input low voltage for I pad
Pad set-up time for I pad
V
ILI SR
-
-
0.3 *
VDDP3
V
CMOS
t
SETI CC
-
-
100
ns
1) Hysteresis is implemented to avoid metastable states and switching due to internal ground bounce. It can't be guaranteed
that it suppresses switching due to external system noise.
Table 3-11 Driver Mode Selection for A1 Pads
PDx.2
PDx.1
PDx.0
Port Functionality
Speed grade 1
Speed grade 2
Driver Setting
medium (A1m)
weak (A1w)
X
X
X
X
0
1
Table 3-12 Driver Mode Selection for A1+ Pads
PDx.2
PDx.1
PDx.0
Port Functionality
Speed grade 1
Speed grade 2
Speed grade 3
Speed grade 4
Driver Setting
X
X
X
X
0
0
1
1
0
1
0
1
Strong soft edge (A1+sf)
Strong slow edge (A1+sw)
medium (A1+m)
weak (A1+w)
Data Sheet
3-182
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationVADC Parameters
3.6
VADC Parameters
VADC parameter are valid for VDDM = 4.5 V to 5.5 V.
This table also covers the parameters for Class D pads.
Table 3-13 VADC
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Analog reference voltage 1)
Analog reference ground
V
V
V
AREF SR
VAGND
1.0
+
-
VDDM
0.05
+
+
V
V
AGND SR VSSM
-
-
VSSM
0.05
0.05
Analog input voltage range
Converter reference clock
AIN SR
VAGND
-
VAREF
20
V
f
ADCI SR
CONV CC
2
-
-
MHz
pC
Charge consumption per
conversion 2) 3)
Q
50
75
VAIN = 5 V, charge
consumed from
reference pin,
precharging disabled
-
-
-
-
-
10
22
-
pC
VAIN = 5 V, charge
consumed from
reference pin,
precharging enabled
Conversion time for 12-bit
result
t
t
C12 CC
(16 +
Includes sample time
and post calibration
STC) x
tADCI + 2 x
tVADC
Conversion time for 10-bit
result
C10 CC
(14 +
-
Includes sample time
Includes sample time
Includes sample time
STC) x
tADCI + 2 x
tVADC
Conversion time for 8-bit result tC8 CC
(12 +
-
STC) x
tADCI + 2 x
tVADC
Conversion time for fast
compare mode
t
CF CC
(4 + STC) -
x tADCI + 2
x tVADC
Broken wire detection delay
against VAGND
t
t
BWG CC
BWR CC
-
-
-
-
120
cycles Result below 10%
cycles Result above 80%
4)
Broken wire detection delay
-
60
5)
against VAREF
Input leakage at analog inputs IOZ1 CC
-350
350
nA
Analog Inputs overlaid
with pull down
diagnosis
-150
-4 6)
-
-
150
4 6)
nA
else
Total Unadjusted Error 1)
Data Sheet
TUE CC
LSB
12-bit resolution
3-183
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationVADC Parameters
Table 3-13 VADC (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
3
INL Error
EAINL CC
-3
-
-
-
-
-
LSB
LSB
LSB
LSB
pF
12-bit resolution
12-bit resolution
12-bit resolution
12-bit resolution
Gain Error 1)
DNL error 1)
Offset Error 1)
EAGAIN CC -3.5
EADNL CC -3
EAOFF CC -4
3.5
3
4
Total capacitance of an analog CAINT CC
-
30
input
Switched capacitance of an
analog input
C
AINS CC
2
-
-
-
-
7
pF
Resistance of the analog input RAIN CC
path
1.5
30
kOhm
pF
Switched capacitance of a
reference input
CAREFS CC
-
RMS Noise 7)
ENRMS CC
OZ2 CC
-
0.5
-
0.8 6)8)
2
LSB
µA
Positive reference VAREFx pin
I
-2
V
AREFx = VAREF
TJ>150°C
AREFx = VAREF
TJ≤150°C
AGNDx = VAGND
TJ>150°C
AGNDx = VAGND
TJ≤150°C
;
leakage
-1
-
-
-
-
1
µA
V
;
Negative reference VAGNDx pin IOZ3 CC
leakage
-2.5
-1.5
-
2.5
1.5
1
µA
V
;
;
µA
V
Resistance of the reference
input path
R
AREF CC
kOhm
kOhm
CSD resistance 9)
R
R
CSD CC
MDD CC
-
-
-
-
28
Resistance of the multiplexer
diagnostics pull-down device
25 + 1*VIN
35 - 8*VIN kOhm 0 V ≤ VIN ≤ 2.5 V
-5 +
15 +
kOhm 2.5 V ≤ VIN ≤ VDDM
13*VIN
16*VIN
Resistance of the multiplexer
diagnostics pull-up device
R
R
MDU CC
45 - 6*VIN
-
90 -
16*VIN
kOhm 0 V ≥ VIN ≤ 2.5 V
40 - 4*VIN
-
-
65 - 6*VIN kOhm 2.5 V ≤ VIN ≤ VDDM
Resistance of the pull-down
test device 10)
PDD CC
-
0.3
kOhm
CSD voltage accuracy 11) 12)
dVCSD CC -
WU CC
-
-
10
12
%
Wakeup time
t
-
µs
1) If the reference voltage is reduced by the factor k (k < 1), TUE,DNL,INL,Gain, and Offset errors increase also by the factor
1/k. VAREF must be decoupled with an external capacitor.
2) For QCONV = X pC and a conversion time of 1 µs a rms value of X µA results for IAREFx
.
3) For the details of the mapping for a VADC group to pin VAREFx please see the User's Manual.
4) The broken wire detection delay against VAGND is measured in numbers of consecutive precharge cycles at a conversion
rate higher than 1 conversion per 500 ms.
5) The broken wire detection delay against VAREF is measured in numbers of consecutive precharge cycles at a conversion
rate higher than 1 conversion per 10 ms. This function is influenced by leakage current, in particular at high temperature.
Data Sheet
3-184
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationVADC Parameters
6) Resulting worst case combined error is arithmetic combination of TUE and ENRMS
.
7) This parameter is valid for soldered devices and requires careful analog board design.
8) Value is defined for one sigma Gauss distribution.
9) In order to avoid an additional error due to incomplete sampling, the sampling time shall be set greater than 5 * RCSD * CAINS
.
10) The pull-down resistor RPDD is connected between the input pad and the analog multiplexer. The input pad
itself adds another 200-Ohm series resistance, when measuring through the pin.
11) CSD: Converter Self Diagnostics, for details please consult the User's Manual.
12) Note, that in case CSD voltage is chosen to nom. 1/3 or 2/3 of VAREF voltage, the reference voltage is loaded with a current
of max. VAREF / 45 kOhm.
VADC parameter are valid for VDDM = 2.97 V to 4.5 V.
Table 3-14 VADC_33
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Analog reference voltage 1)
Analog reference ground
V
V
V
AREF SR
VAGND
1.0
+
-
VDDM
0.05
+
+
V
V
AGND SR VSSM
-
-
VSSM
0.05
0.05
Analog input voltage range
Converter reference clock
AIN SR
VAGND
-
VAREF
20
V
f
ADCI SR
CONV CC
2
-
-
MHz
pC
Charge consumption per
conversion 2) 3)
Q
35
50
VAIN = 3.3 V, charge
consumed from
reference pin,
precharging disabled
-
-
-
-
8
17
-
pC
VAIN = 3.3 V, charge
consumed from
reference pin,
precharging enabled
Conversion time for 12-bit
result
t
t
C12 CC
(16 +
Includes sample time
and post calibration
STC) x
tADCI + 2 x
tVADC
Conversion time for 10-bit
result
C10 CC
(14 +
-
Includes sample time
Includes sample time
Includes sample time
STC) x
tADCI + 2 x
tVADC
Conversion time for 8-bit result tC8 CC
(12 +
-
STC) x
tADCI + 2 x
tVADC
Conversion time for fast
compare mode
t
t
CF CC
-
-
(4 + STC) -
x tADCI + 2
x tVADC
Broken wire detection delay
BWG CC
-
120
cycles Result below 10%
4)
against VAGND
Data Sheet
3-185
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationVADC Parameters
Table 3-14 VADC_33 (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Broken wire detection delay
against VAREF
t
BWR CC
-
-
60
cycles Result above 80%
5)
Input leakage at analog inputs IOZ1 CC
-350
-
350
nA
Analog Inputs overlaid
with pull down
diagnostics
-150
-12
-
-
150
12
nA
else
Total Unadjusted Error 1)
TUE CC
EAINL CC
LSB
12-bit Resolution; TJ >
150 °C
-6
-
-
-
-
-
6
LSB
LSB
LSB
LSB
LSB
12-bit Resolution; TJ ≤
150 °C
INL Error
-12
-5
12
5
12-bit Resolution; TJ >
150 °C
12-bit Resolution; TJ ≤
150 °C
Gain Error 1)
EAGAIN CC -6
-5.5
6
12-bit Resolution; TJ >
150 °C
5.5
12-bit Resolution; TJ ≤
150 °C
DNL error 1)
Offset Error 1)
EADNL CC -4
EAOFF CC -6
-
-
4
6
LSB
LSB
12-bit resolution
12-bit Resolution; TJ >
150 °C
-5
-
5
LSB
pF
12-bit Resolution; TJ ≤
150 °C
Total capacitance of an analog CAINT CC
input
-
-
30
7
Switched capacitance of an
analog input
CAINS CC
2
-
4
-
pF
Resistance of the analog input RAIN CC
path
4.5
30
kOhm
pF
Switched capacitance of a
reference input
CAREFS CC
-
-
RMS Noise 6)
ENRMS CC
OZ2 CC
-
-
-
1.7
2
LSB
µA
Positive reference VAREFx pin
I
-2
V
AREFx = VAREF
TJ>150°C
AREFx = VAREF
TJ≤150°C
AGNDx = VAGND
TJ>150°C
AGNDx = VAGND
TJ≤150°C
;
leakage
-1
-2.5
-1
-
-
-
-
-
1
µA
V
;
Negative reference VAGNDx pin IOZ3 CC
leakage
2.5
1
µA
V
;
;
µA
V
Resistance of the reference
input path
R
AREF CC
3
kOhm
Data Sheet
3-186
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationVADC Parameters
Table 3-14 VADC_33 (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
CSD resistance 7)
R
R
CSD CC
MDD CC
-
-
-
28
kOhm
Resistance of the multiplexer
diagnostics pull-down device
25 + 3*VIN
40 +
12*VIN
kOhm 0 V ≤ VIN ≤ 1.667 V
0 + 18*VIN
-
-
0 + 18*VIN kOhm 1.667 V ≤ VIN ≤ VDDM
Resistance of the multiplexer
diagnostics pull-up device
R
R
MDU CC
60 -
12*VIN
120 -
kOhm 0 V ≤ VIN ≤ 1.667 V
kOhm 1.667 V ≤ VIN ≤ VDDM
kOhm
30*VIN
55 - 9*VIN
-
-
95 -
15*VIN
Resistance of the pull-down
test device 8)
PDD CC
-
0.9
CSD voltage accuracy 9) 10)
dVCSD CC -
WU CC
-
-
10
12
%
Wakeup time
t
-
µs
1) If the reference voltage is reduced by the factor k (k < 1), TUE,DNL,INL,Gain, and Offset errors increase also by the factor
1/k. VAREF must be decoupled with an external capacitor.
2) For QCONV = X pC and a conversion time of 1 µs a rms value of X µA results for IAREFx
.
3) For the details of the mapping for a VADC group to pin VAREFx please see the User's Manual.
4) The broken wire detection delay against VAGND is measured in numbers of consecutive precharge cycles at a conversion
rate higher than 1 conversion per 500 ms.
5) The broken wire detection delay against VAREF is measured in numbers of consecutive precharge cycles at a conversion
rate higher than 1 conversion per 10 ms. This function is influenced by leakage current, in particular at high temperature.
6) This parameter is valid for soldered devices and requires careful analog board design.
7) In order to avoid an additional error due to incomplete sampling, the sampling time shall be set greater than 5 * RCSD * CAINS
.
8) The pull-down resistor RPDD is connected between the input pad and the analog multiplexer. The input pad
itself adds another 200-Ohm series resistance, when measuring through the pin.
9) CSD: Converter Self Diagnostics, for details please consult the User's Manual.
10) Note, that in case CSD voltage is chosen to nom. 1/3 or 2/3 of VAREF voltage, the reference voltage is loaded with a current
of max. VAREF / 45 kOhm.
A/D Converter
RSource
RAIN, On
VAIN
-
CExt
CAINT CAINS
CAINS
MCS05570
Figure 3-1 Equivalent Circuitry for Analog Inputs
Data Sheet
3-187
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationMHz Oscillator
3.7
MHz Oscillator
OSC_XTAL is used as accurate and exact clock source. OSC_XTAL supports 8 MHz to 40 MHz crystals external
outside of the device. Support of ceramic resonators is also provided.
Table 3-15 OSC_XTAL
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
-25
4
Max.
25
Input current at XTAL1
Oscillator frequency
I
IX1 CC
-
-
µA
VIN>0V; VIN<VDDP3V
f
OSC SR
40
MHz
Direct Input Mode
selected
8
-
40
MHz
External Crystal Mode
selected
Oscillator start-up time 1)
t
OSCS CC
-
-
-
5 2)
ms
V
Input high voltage at XTAL1
V
IHBX SR
0.8
VDDP3
+
If shaper is bypassed
If shaper is bypassed
0.5
Input low voltage at XTAL1
Input voltage at XTAL1
V
ILBX SR
-0.5
-0.5
-
-
0.4
V
V
VIX SR
VDDP3
0.5
+
+
If shaper is not
bypassed
Input amplitude (peak to peak) VPPX SR
at XTAL1
0.3 *
VDDP3
-
-
VDDP3
1.0
V
V
If shaper is not
bypassed; fOSC
>
25MHz
0.4 *
VDDP3
VDDP3
1.0
+
If shaper is not
bypassed; fOSC
25MHz
≤
1) tOSCS is defined from the moment when VDDP3 = 3.13V until the oscillations reach an amplitude at XTAL1 of 0.3 * VDDP3
.
The external oscillator circuitry must be optimized by the customer and checked for negative resistance as recommended
and specified by crystal suppliers.
2) This value depends on the frequency of the used external crystal. For faster crystal frequencies this value decrease.
Note:It is strongly recommended to measure the oscillation allowance (negative resistance) in the final target
system (layout) to determine the optimal parameters for the oscillator operation. Please refer to the limits
specified by the crystal or ceramic resonator supplier.
Data Sheet
3-188
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationBack-up Clock
3.8
Back-up Clock
The back-up clock provides an alternative clock source.
Table 3-16 Back-up Clock
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Back-up clock before trimming fBACKUT CC 75
Max.
125
100
100
100
MHz
kHz
Slow speed Back-up clock
Back-up clock after trimming
f
f
BACKSS CC 75
BACKT CC 97.5
125
102.5
MHz
Data Sheet
3-189
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationTemperature Sensor
3.9
Temperature Sensor
Table 3-17 DTS
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
100
1
Measurement time
tM CC
-
-
-
µs
°C
Calibration reference accuracy TCALACC CC -1
calibration points @
TJ=-40°C and
TJ=127°C
Non-linearity accuracy over
temperature range
T
T
NL CC
SR SR
-2
-
2
°C
Temperature sensor range
-40
-
-
-
170
20
°C
µs
Start-up time after resets
inactive
tTSST SR
The following formula calculates the temperature measured by the DTS in [oC] from the RESULT bit field of the
DTSSTAT register.
(3.1)
DTSSTATRESULT – (607)
Tj = ---------------------------------------------------------------------------
2, 13
Data Sheet
3-190
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower Supply Current
3.10
Power Supply Current
The total power supply current defined below consists of leakage and switching component.
Application relevant values are typically lower than those given in the following table and depend on the customer's
system operating conditions (e.g. thermal connection or used application configurations).
The operating conditions for the parameters in the following table are:
The real (realisic) power pattern defines the following conditions:
•
•
•
•
•
•
•
•
TJ = 150 °C
f
f
SRI = fMAX = fCPU0 = 200 MHz
SPB = fSTM = fGTM = fBAUD1 = fBAUD2 = fASCLIN = 40 MHz
V
V
V
DD = 1.326 V
DDP3 = 3.366 V
DDM = 5.1 V
core is active
the following peripherals are inactive: HSM, Ethernet, and MTU
The max power pattern defines the following conditions:
•
•
•
•
•
•
•
•
TJ = 150 °C
f
f
SRI = fMAX = fCPU0 = 200 MHz
SPB = fSTM = fGTM = fBAUD1 = fBAUD2 = fASCLIN = 100 MHz
V
V
V
DD = 1.43 V
DDP3 = 3.63 V
DDM = 5.5 V
core is active
all peripherals are active
Table 3-18 Power Supply
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
∑ Sum of IDD 1.3 V core and
peripheral supply currents
I
DD CC
-
-
215 1)
mA
valid for Feature
Package L, LC, LP, S,
and SP; max power
pattern
-
-
160
mA
valid for Feature
Package L, LC, LP, S,
and SP; real power
pattern
Data Sheet
3-191
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower Supply Current
Table 3-18 Power Supply (cont’d)
Parameter Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
I
DD core current during active IDDPORST
-
-
-
-
85
mA
valid for Feature
Package L, LC, LP, S,
and SP; TJ=165°C
power-on reset (PORST held CC
low)
-
-
60
40
mA
mA
valid for Feature
Package L, LC, LP, S,
and SP; TJ=150°C
valid for Feature
Package L, LC, LP, S,
and SP; TJ=125°C
I
DD core current of CPU0
I
DDC01 CC
-
-
-
-
-
-
-
34
mA
mA
mA
mA
real power pattern
lockstep core active
I
I
DD core current added by HSM IDDHSM CC
DD core current added by FFT IDDFFT CC
20
HSM running at
100MHz.
40
FFT running at
200MHz
∑ Sum of 3.3 V supply currents IDDx3RAIL CC -
without pad activity
34 2)
real power pattern;
incl. OSC, EVR and
Pflash read current
-
-
44
mA
incl. OSC, EVR, Pflash
read and Pflash
programming current.
I
DDM supply current
I
DDM CC
-
-
-
-
-
-
6
mA
mA
mA
max pattern; current
for 2x VADC modules.
Σ Sum of all currents with DC- IDDTOTDC3
DC EVR13 regulator active
129
200
real power pattern;
VDDP3 = 3.3V
3)
CC
∑ Sum of all currents (incl.
I
I
DDTOTL CC
valid for Feature
Package L, LC, LP, S,
and SP; real power
pattern
DDP3RAIL+IDD+IDDM)
∑ Sum of all currents
(STANDBY mode)
I
EVRSB CC
-
-
-
-
150 4)
µA
Standby RAM is
active. Power to
remaining domains
switched off. TJ =
25°C; VEVRSB = 5V
∑ Sum of all currents (SLEEP
I
SLEEP CC
10
mA
CPU is in idle, All
mode)
peripherals in sleep,
f
SRI/SPB = 1 MHz; TJ =
55°C
Data Sheet
3-192
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower Supply Current
Table 3-18 Power Supply (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Maximum power dissipation
PD CC
-
-
460
mW
valid for Feature
Package L, LC, LP, S,
and SP; max power
pattern
-
-
360 5)
mW
valid for Feature
Package L, LC, LP, S,
and SP; real power
pattern
1) It shall be ensured when using the SC DC DC EVR13 that the current is limited to the maximum value documented in the
EVR section. EVR SRCSCDC Interrupt shall be kept active to indicate violations of max current and temperature shall be
monitored to keep leakage current within limits.
2) Realistic Pflash read pattern with 50% Pflash bandwidth utlilization and a code mix of 50% 0s and 50% 1s. Dynamic Flash
Idle via FCON.IDLE is activated bringing a benefit of 4 mA. A decoupling capacitor of atleast 100nF is used. Dflash read
current is also included. In TC23x, separate VDDFL3 pin is not available, so only the total VDDx3RAIL is measured and
characterized.
3) The total current drawn from external regulator is estimated with 72% EVR13 SMPS regulator Efficiency. IDDTOTDCx is
calculated from IDDTOT using the scaled core current [(IDD x VDD)/(VinxEfficiency)] and constitutes all other rail currents and
IDDM
.
4) The current during STANDBY mode is drawn at VDDP3 supply pin. During RUN-STANDBY mode transition the current
drawn at VDDP3 supply pin is less than 6mA.
5) Incase of EVR13 SCDCDC mode, 50 mW need to be additionally added for the real pattern usecase considering 72%
SCDCDC efficiency. Incase of EVR13 LDO mode, 320 mW need to be additionally added to consider the pass device
power drop out.
3.10.1
Calculating the 1.3 V Current Consumption
The current consumption of the 1.3 V rail compose out of two parts:
•
•
Static current consumption
Dynamic current consumption
The static current consumption is related to the device temperature TJ and the dynamic current consumption
depends of the configured clocking frequencies and the software application executed. These two parts needs to
be added in order to get the rail current consumption.
Valid for Feature Package L, LC, LP, S, and SP products:
(3.2)
mA
0, 01792 × T
--------
C
I
= 1, 2092
× e
[C]
J
0
(3.3)
mA
--------
0, 01982 × T
I
= 3, 196
× e
[C]
J
0
C
Function 2 defines the typical static current consumption and Function 3 defines the maximum static current
consumption. Both functions are valid for VDD = 1.326 V.
Data Sheet
3-193
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower-up and Power-down
3.11
Power-up and Power-down
0
1
2
3
4
VDDP3 (externally supplied )
3.63 V
3.30 V
2.97 V
Primary Reset Threshold
0 V
PORST (output )
PORST (input )
VDD (internally generated
by EVR13)
1.33 V
1.30 V
1.17 V
Primary Reset Threshold
0 V
T2
T0
T1
T3
T4
Power Ramp-down phase
EVR13 Ramp-up
Phase
Basic Supply & Clock
Infrastructure
Firmware Execution
User Code Execution
fCPU=100 MHz default
on firmware exit
Startup_Diag_4
v 0.1
Figure 3-2 Single Supply mode - 3.3 V single supply
Data Sheet
3-194
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower-up and Power-down
3.11.1
Single Supply mode
3.3 V single supply mode. 1.3 V is generated internally by the EVR13 regulator.
•
The rate at which current is drawn from the external regulator (dIEXT /dt) is limited during the basic
infrastructure and EVR13 regulator start-up phase (T0 upto T2) to a maximum of 100 mA/100 us. EVR13 is
also robust against a voltage ramp-up starting from a residual voltage between 0 - 1 V. Start-up slew rates for
supply rails should comply to datasheet values.
•
Furthermore it is also ensured that the current drawn from the external regulator (dIEXT /dt) is limited during
the Firmware start-up phase (T2 upto T3) to a maximum of 100 mA/100 us.
•
•
PORST is active/ asserted when either PORST (input) or PORST (output) is active/ asserted.
PORST (input) active means that the reset is held active by external agents by pulling the PORST pin low. It
is recommended to keep the PORST (input) asserted until the external supply is above the respective primary
reset threshold.
•
•
PORST (output) active means that µC asserts the reset internally and drives the PORST pin low thus
propagating the reset to external devices. The PORST (output) is asserted by the µC when atleast one among
the two supply domains (1.3 V or 3.3 V) violate their primary under-voltage reset thresholds.The
PORST (output) is deasserted by the µC when all supplies are above their primary reset thresholds and the
basic supply and clock infrastructure is available.
The power sequence as shown in Figure 3-2 is enumerated below
–
T1 refers to the point in time when basic supply and clock infrastructure is available as the external supply
ramps up. The supply mode is evaluated based on the HWCFG[0,2] pins and consequently a soft start of
EVR13 regulator is initiated.
–
T2 refers to the point in time when all supplies are above their primary reset thresholds. EVR13 regulator
has ramped up. PORST (output) is deasserted and HWCFG[3:5] pins are latched on PORST rising edge.
Firmware execution is initiated.
–
–
T3 refers to the point in time when Firmware execution is completed. User code execution starts with a
default frequency of 100 MHz.
T4 refers to the point in time during the Ramp-down phase when atleast one of the externally provided or
generated supplies (1.3 V or 3.3 V) drop below their respective primary under-voltage reset thresholds.
Data Sheet
3-195
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower-up and Power-down
VDDP3 (externally supplied )
0
1
2
3
3.63 V
3.30 V
2.97 V
Primary Reset Threshold
0 V
VDD (externally supplied)
1.33 V
1.30 V
1.17 V
Primary Reset Threshold
0 V
PORST (output )
PORST (input)
T0
T1
T2
T3
Basic Supply & Clock
Infrastructure
User Code Execution
fCPU=100 MHz default
on firmware exit
Firmware Execution
Power Ramp -down phase
Startup_Diag_5
v 0.1
Figure 3-3 External Supply mode - 3.3 V and 1.3 V external supply
Data Sheet
3-196
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPower-up and Power-down
3.11.2
External Supply mode
All supplies, namely 3.3 V & 1.3 V, are externally supplied.
•
External supplies VDDP3 & VDD may ramp-up or ramp-down independent of each other with regards to start,
rise and fall time(s). The supply system is also robust against a voltage ramp-up starting from a residual voltage
between 0 - 1 V. Start-up slew rates for supply rails should comply to datasheet values.
•
The rate at which current is drawn from the external regulator (dIEXT /dt, dIDD /dt) is limited in the Start-up
phase to a maximum of 50 mA/100 us.
•
•
PORST is active/ asserted when either PORST (input) or PORST (output) is active/ asserted.
PORST (input) active means that the reset is held active by external agents by pulling the PORST pin low. It
is recommended to keep the PORST (input) asserted until all the external supplies are above their primary
reset thresholds.
•
•
PORST (output) active means that µC asserts the reset internally and drives the PORST pin low thus
propagating the reset to external devices. The PORST (output) is asserted by the µC when atleast one among
the two supply domains (1.3 V or 3.3 V) violate their primary under-voltage reset thresholds.The
PORST (output) is deasserted by the µC when all supplies are above their primary reset thresholds and the
basic supply and clock infrastructure is available.
The power sequence as shown in Figure 3-3 is enumerated below
–
T1 refers to the point in time when all supplies are above their primary reset thresholds and basic clock
infrastructure is available. The supply mode is evaluated based on the HWCFG[0,2] pins. PORST (output)
is deasserted and HWCFG[3:5] pins are latched on PORST rising edge. Firmware execution is initiated.
–
–
T2 refers to the point in time when Firmware execution is completed. User code execution starts with a
default frequency of 100 MHz.
T3 refers to the point in time during the Ramp-down phase when atleast one of the externally provided
supplies (1.3 V or 3.3 V) drop below their respective primary under-voltage reset thresholds.
Data Sheet
3-197
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationReset Timing
3.12
Reset Timing
Table 3-19 Reset Timings
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Application Reset Boot Time 1) tB CC
-
-
350
µs
operating with max.
frequencies
System Reset Boot Time
Power on Reset Boot Time 2)
t
t
BS CC
BP CC
-
-
-
-
1
ms
ms
2.5
dV/dT=1V/ms.
including EVR ramp-
up and Firmware
execution time
-
-
1.1
ms
Firmware execution
time; without EVR
operation (external
supply only)
EVR start-up or ramp-up time tEVRstartup
-
-
-
1
-
ms
ms
dV/dT=1V/ms
CC
Minimum PORST active hold
time after power supplies are
stable at operating levels 3)
t
POA CC
1
HWCFG pins hold time from
ESR0 rising edge
t
t
HDH CC
HDS CC
16 / fSPB
-
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
HWCFG pins setup time to
ESR0 rising edge
0
-
Ports inactive after ESR0 reset tPI CC
active
-
8/fSPB
Ports inactive after PORST
reset active 4)
t
t
t
PIP CC
POH SR
POS SR
-
150
Hold time from PORST rising
edge
150
0
-
-
Setup time to PORST rising
edge
1) The duration of the boot time is defined between the rising edge of the internal application reset and the clock cycle when
the first user instruction has entered the CPU pipeline and its processing starts.
2) The duration of the boot time is defined by all external supply voltages are inside there operation condictions and the clock
cycle when the first user instruction has entered the CPU pipeline and its processing starts.
3) The regulator that supplies VEXT should ensure that VEXT is in the operational region before PORST is externally released
by the regulator. Incase of 5V nominal supply, it should be ensured that VEXT > 4V before PORST is released. Incase of
3.3V nominal supply , it should be ensured that VEXT > 3V before PORST is released. The additional minimum PORST hold
time is required as an additional mechanism to avoid consecutive PORST toggling owing to slow supply slopes or residual
supply ramp-ups. It is also required to activate external PORST atleast 100us before power-fail is recognised to avoid
consecutive PORST toggling on a power fail event.
4) This parameter includes the delay of the analog spike filter in the PORST pad.
Data Sheet
3-198
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationReset Timing
VDDPPA
VDDPPA
VDDP
VDD
VDDPR
tPOA
tPOA
Warm
PORST
ESR0
Cold
t PI
tPI
tPIP
Tristate Z / pullup H
Programmed
Z / H
Programmed
Z / H
Programmed
Pads
Pad-
state
undefined
Pad-
state
undefined
tPOS
tPOS
tPOH
tPOH
TRST
TESTMODE
tHDH
tHDH
config
tHDA
tHDH
config
tHDA
HWCFG
power -on config
reset_beh_aurix
Figure 3-4 Power, Pad and Reset Timing
Data Sheet
3-199
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEVR
3.13
EVR
Table 3-20 LDO
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
2.97
1.17
Max.
3.63
1.43
Input voltage range 1)
VIN SR
-
V
V
pass device=on chip
pass device=on chip
Output voltage operational
range including load/line
regulation and aging incase of
LDO regulator
V
V
OUT CC
1.3
Output VDD static voltage
accuracy after trimming without
dynamic load/line regulation
with aging incase of LDO
regulator.
OUTT CC
1.275
1.3
1.325
V
product load equal to
I
DD of max power
pattern; either
TJ≤150°C and pass
device=on chip or
TJ≤170°C and pass
device=off chip
Output buffer capacitance on
VOUT
C
OUT CC
1.4
-
2.2
-
3
µF
On chip pass device
usage restricted to IDD
< 230mA.; pass
2)
device=on chip
Primary undervoltage reset
V
RST13 CC
1.17 4)
V
pass device=on chip
3)
threshold for VDD
Startup time
External VIN supply ramp 5)
t
STR CC
-
-
-
1000
50
µs
pass device=on chip
dVin/dT
1
V/ms pass device=on chip
SR
Load step response
Line step response
dVout/dIout -
CC
-
-
-
100
-
mV
mV
mV
dI=-100mA;
Tsettle=20µs; pass
device=on chip
-100
dI=75mA;
Tsettle=20µs; pass
device=on chip
dVout/dVin -10
10
dV/dT=1V/ms; pass
CC
device=on chip
1) A maximum pass device dropout voltage of 700mV is included in the minimum input voltage to ensure optimal pass device
operation.
2) It is recommended to select a capacitor with ESR less than 50 mOhm (0.5MHz - 10 MHz). It is also recommended that the
resistance of the supply trace from the pin to the EVR output capacitor is less than 100 mOhm.
3) The reset release on supply ramp-up is delayed by a time duration 30-60 µs after reaching undervoltage reset threshold.
This serves as a time hysteresis to avoid multiple consecutive cold PORST events during slow supply ramp-ups owing to
voltage drop/current jumps when reset is released.The reset limit of 1,17V at pin is for the case with 1.3V generated
internally from EVR13. In case the 1.3V supply is provided externally, the bondwire drop will cause a reset at a higher
voltage of 1.18V at the VDD pin.
4) In TQFP-100 pin package, only VDDPRIUV is tested instead of VRST13 as HWCFG2 pin is absent.
5) EVR robust against residual voltage ramp-up starting between 0-1 V.
Data Sheet
3-200
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEVR
Table 3-21 Supply Monitoring
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
V
DDP3 primary undervoltage
VDDP3PRIUV 2.86
SR
2.92
1.15
3.30
1.30
-
2.97
V
monitor accuracy after
trimming
1)
VDD primary undervoltage
VDDPRIUV
SR
1.13
3.23
1.17
3.37
1.33
1.8
V
monitor accuracy after
trimming
1)
VDDP3 secondary supply
VDDP3MON
V
SWDxxVAL VDDP3
monitoring
threshold=3.3V=91h
monitor accuracy
CC
VDD secondary supply monitor VDDMON CC 1.27
V
EVR13xxVAL VDD
monitoring
threshold=1.3V=E4h
accuracy
EVR primary and secondary
monitor measurement latency
for a new supply value
t
EVRMON CC -
µs
1) The monitor tolerances constitute the inherent variation of the bandgap and ADC over process, voltage and temperature
operational ranges. The xxxPRIUV parameters are device individually tested in production with ±1% tolerance about the
min and max xxxPRIUV limits. In TQFP100 and QFP80 pin packages, VDDPRIUV is not tested as HWCFG2 pin is absent.
Table 3-22 EVR13 SMPS
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
2.97
-
Max.
3.63
1.43
Input VDDP3 voltage range
VIN CC
-
-
V
V
SMPS regulator output voltage VDDDC CC
range including load/line
regulation and aging 1)
V
DDP3 > 2.97V; IDDDC
200mA; fDCDC = 1MHz
DDP3 > 2.97V; IDDDC
250mA; fDCDC = 1MHz
DDP3 > 2.97V; IDDDC
230mA; fDCDC = 1MHz
<
1.17
-
-
V
V
V
<
SMPS regulator static voltage
output accuracy after trimming
without dynamic load/line
Regulation with aging. 2)
V
DDDCT CC 1.275
1.3
1.325
V
<
Programmable switching
frequency
f
DCDC CC
0.4
-
-
-
2.0
26
90
MHz
mV
Maximum ripple at IMAX (peak- ∆VDDDC CC -
VDDP3 > 2.97V; IDDDC <
230mA; fDCDC = 1MHz
to-peak) 3)
SMPS regulator load transient dVout/dIout -90
mV
dI < 100mA ;
response
CC
fDCDC=1MHz; tr=0.1µs;
tf=0.1µs; VDDDC=1.3V
Data Sheet
3-201
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEVR
Table 3-22 EVR13 SMPS (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Maximum output current of the IMAX SR
regulator
-
-
250 4)
mA
%
VDDP3 > 2.97V; VDD =
1.17V; fDCDC = 1MHz
SMPS regulator efficiency
n
DC CC
-
72
-
VIN=3.3V;
I
DDDC=200mA;
f
DCDC=1MHz
1) Incase of SMPS mode, It shall be ensured that the VDD output pin shall be connected on PCB level to all other VDD Input
pins.
2) Incase of fSRI running with max frequency, it shall be ensured that the VDD operating range is limited to 1.235V upto 1.430V.
The DCDC may be configured in this case with a nominal voltage of 1.33V±7.5%. The static accuracy and regulation
parameter ranges remain also valid for this case.
3) If frequency spreading (SDFREQSPRD = 1) is activated, an additional ripple of 1% need to be considered.
4) It shall be ensured when using the SC DC DC EVR13 that the current is limited to the maximum value. EVR SRCSCDC
Interrupt shall be kept active to indicate violations of max current and temperature shall be monitored to keep leakage
current within limits.
Table 3-23 EVR13 SMPS External components
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
External output capacitor value COUTDC SR 6.5
10
13.5
µF
IDDDC=230mA
1)
External output capacitor ESR CDC_ESR SR -
-
50
mOhm f≥0.5MHz; f≤10MHz
-
-
100
6.11
50
Ohm
µF
f=10Hz
IDDDC=230mA
External input capacitor value 1) CIN SR
3.29
4.7
-
External input capacitor ESR
CIN_ESR SR
-
mOhm f≥0.5MHz; f≤10MHz
-
-
12)
100
1.3
Ohm
µF
f=100Hz
IDDDC=230mA
External flying capacitor value
CFLY SR
0.7
1)
Flying capacitor ESR
CFLY_ESR
SR
-
-
-
-
50
mOhm f≥0.5MHz ; f≤10MHz
Ohm f=100Hz
100
1) Capacitor min-max range represent typical ±35% tolerance including DC bias effect. The trace resistance from the
capacitor to the supply or ground rail should be limited to 25 mOhm.
2) It is recommended to place the flying capacitor close to the pins without vias to have minimal routing resistance from pin
to the capacitor terminal of less than 25mOhm.
Data Sheet
3-202
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPhase Locked Loop (PLL)
3.14
Phase Locked Loop (PLL)
Table 3-24 PLL
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
PLLBASE CC 80
Max.
360
800
24
PLL base frequency
VCO frequency range
VCO Input frequency range
Modulation Amplitude
Peak Period jitter
f
f
f
150
MHz
MHz
MHz
%
VCO SR
REF CC
400
8
-
-
-
-
-
-
MA CC
DP CC
0
2
-200
-5
200
5
ps
Peak Accumulated Jitter
Total long term jitter
DPP CC
ns
without modulation
JTOT CC
-
12.2
ns
including modulation;
MA ≤ 1%
-
-
11.5
ns
including modulation;
MA≤0.9%
System frequency deviation
f
SYSD CC
-
-
0.01
5.4
%
with active modulation
Modulation variation frequency fMV CC
PLL lock-in time tL CC
2
3.6
-
MHz
µs
11.5
200
Note:The specified PLL jitter values are valid if the capacitive load per pin does not exceed CL = 20 pF with the
maximum driver and soft edge (speed grade 1).
Note:The maximum peak-to-peak noise on the power supply voltage, is limited to a peak-to-peak voltage of
V
PP = 100 mV for noise frequencies below 300 KHz and VPP = 40 mV for noise frequencies above 300 KHz.
These conditions can be achieved by appropriate blocking of the supply voltage as near as possible to the
supply pins and using PCB supply and ground planes.
Data Sheet
3-203
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationERAY Phase Locked Loop (ERAY_PLL)
3.15
ERAY Phase Locked Loop (ERAY_PLL)
Table 3-25 PLL_ERAY
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
PLL Base Frequency of the
ERAY PLL
fPLLBASE_ERA 50
Y CC
200
320
MHz
MHz
MHz
VCO frequency range of the
ERAY PLL
fVCO_ERAY
400
-
-
480
24
SR
VCO input frequency of the
ERAY PLL
f
REF SR
16
Accumulated_Jitter
DP CC
DPP CC
-0.5
-0.8
-
-
0.5
0.8
ns
ns
Accumulated jitter at SYSCLK
pin
PLL lock-in time
tL CC
5.6
-
200
µs
Note:The specified PLL jitter values are valid if the capacitive load per pin does not exceed CL = 20 pF with the
maximum driver and soft edge (speed grade 1).
Note:The maximum peak-to-peak noise on the power supply voltage, is limited to a peak-to-peak voltage of
V
PP = 100 mV for noise frequencies below 300 KHz and VPP = 40 mV for noise frequencies above 300 KHz.
These conditions can be achieved by appropriate blocking of the supply voltage as near as possible to the
supply pins and using PCB supply and ground planes.
Data Sheet
3-204
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationAC Specifications
3.16
AC Specifications
All AC parameters are specified for the complette operating range defined in Chapter 3.4 unless otherwise noted
in colum Note / test Condition.
Unless otherwise noted in the figures the timings are defined with the following guidelines:
VDDP3
90%
90%
10%
10%
VSS
tr
tf
rise_fall
Figure 3-5 Definition of rise / fall times
VDDP3
Timing
Reference
Points
VDDP3
VDDP3
2
2
VSS
timing_reference
Figure 3-6 Time Reference Point Definition
Data Sheet
3-205
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationJTAG Parameters
3.17
JTAG Parameters
The following parameters are applicable for communication through the JTAG debug interface. The JTAG module
is fully compliant with IEEE1149.1-2000.
Table 3-26 JTAG
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
25
10
10
-
Max.
TCK clock period
TCK high time
t1 SR
t2 SR
t3 SR
t4 SR
t5 SR
t6 SR
-
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
-
TCK low time
-
TCK clock rise time
TCK clock fall time
4
4
-
-
TDI/TMS setup to TCK rising
edge
6.0
TDI/TMS hold after TCK rising t7 SR
6.0
-
-
ns
edge
TDO valid after TCK falling
edge (propagation delay) 1)
t8 CC
3.0
-
-
-
-
-
ns
ns
ns
CL≤20pF
CL≤50pF
16
-
TDO hold after TCK falling
edge 1)
t
18 CC
2
TDO high impedance to valid t9 CC
-
-
-
-
14
ns
ns
CL≤50pF
CL≤50pF
from TCK falling edge 1)2)
TDO valid output to high
impedance from TCK falling
edge 1)
t
10 CC
13.5
1) The falling edge on TCK is used to generate the TDO timing.
2) The setup time for TDO is given implicitly by the TCK cycle time.
t1
0.9 VDDP
0.1 VDDP
0.5 VDDP
t5
t4
t2
t3
MC_JTAG_TCK
Figure 3-7 Test Clock Timing (TCK)
Data Sheet
3-206
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationJTAG Parameters
TCK
TMS
TDI
t6
t7
t6
t7
t9
t8
t10
TDO
t18
MC_JTAG
Figure 3-8 JTAG Timing
Data Sheet
3-207
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationDAP Parameters
3.18
DAP Parameters
The following parameters are applicable for communication through the DAP debug interface.
Table 3-27 DAP
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
DAP0 clock period
DAP0 high time
t
t
t
t
11 SR
12 SR
13 SR
14 SR
6.25
-
-
-
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
ns
ns
2
2
-
-
DAP0 low time
-
DAP0 clock rise time
1
2
1
2
-
f=160MHz
f=80MHz
f=160MHz
f=80MHz
-
DAP0 clock fall time
t
15 SR
-
-
DAP1 setup to DAP0 rising
edge
t
t
t
16 SR
17 SR
19 CC
4
DAP1 hold after DAP0 rising
edge
2
-
-
ns
DAP1 valid per DAP0 clock
period 1)
3
-
-
-
-
-
-
ns
ns
ns
CL=20pF; f=160MHz
CL=20pF; f=80MHz
CL=50pF; f=40MHz
8
10
1) The Host has to find a suitable sampling point by analyzing the sync telegram response.
t11
0.9 VDDP
0.1 VDDP
0.5 VDDP
t15
t14
t12
t13
MC_DAP0
Figure 3-9 Test Clock Timing (DAP0)
DAP0
t16
t17
DAP1
MC_DAP1_RX
Figure 3-10 DAP Timing Host to Device
Data Sheet
3-208
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationDAP Parameters
t11
DAP1
t19
MC_DAP1_TX
Figure 3-11 DAP Timing Device to Host (DAP1 and DAP2 pins)
Note:The DAP1 and DAP2 device to host timing is individual for both pins. There is no guaranteed max. signal
skew.
Data Sheet
3-209
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationASCLIN SPI Master Timing
3.19
ASCLIN SPI Master Timing
This section defines the timings for the ASCLIN in the TC233 / TC234 / TC237.
Table 3-28 Master Mode A1+strong soft (sf) output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
20
Max.
ASCLKO clock period 1)
t
50 CC
-
-
-
ns
ns
CL=25pF
CL=25pF
Deviation from ideal duty cycle t500 CC
-3
3
2)
MTSR delay from ASCLKO
shifting edge
t
t
t
t
51 CC
510 CC
52 SR
53 SR
-4
-4
20
-3
-
-
-
-
4
4
-
ns
ns
ns
ns
CL=25pF
CL=25pF
CL=25pF
CL=25pF
ASLSOn delay from the first
ASCLKO edge
MRST setup to ASCLKO
latching edge
MRST hold from ASCLKO
latching edge
-
1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be
adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX
.
2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
Table 3-29 Master Mode A1+strong slow (sw) output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
80
Max.
ASCLKO clock period 1)
t
50 CC
-
-
-
ns
ns
CL=50pF
CL=50pF
Deviation from ideal duty cycle t500 CC
-8
8
2)
MTSR delay from ASCLKO
shifting edge
t
t
t
t
51 CC
510 CC
52 SR
53 SR
-12
-12
40
-3
-
-
-
-
12
12
-
ns
ns
ns
ns
CL=50pF
CL=50pF
CL=50pF
CL=50pF
ASLSOn delay from the first
ASCLKO edge
MRST setup to ASCLKO
latching edge
MRST hold from ASCLKO
latching edge
-
1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be
adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX
.
2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
Data Sheet
3-210
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationASCLIN SPI Master Timing
Table 3-30 Master Mode medium output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
100
-10
Max.
-
ASCLKO clock period 1)
t
50 CC
-
-
ns
ns
CL=50pF
CL=50pF
Deviation from ideal duty cycle t500 CC
10
2)
MTSR delay from ASCLKO
shifting edge
t
t
t
t
51 CC
510 CC
52 SR
53 SR
-15
-15
50
-5
-
-
-
-
15
15
-
ns
ns
ns
ns
CL=50pF
CL=50pF
CL=50pF
CL=50pF
ASLSOn delay from the first
ASCLKO edge
MRST setup to ASCLKO
latching edge
MRST hold from ASCLKO
latching edge
-
1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be
adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX
.
2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
Table 3-31 Master Mode weak output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
1000
-25
Max.
-
ASCLKO clock period 1)
t
50 CC
-
-
ns
ns
CL=50pF
CL=50pF
Deviation from ideal duty cycle t500 CC
25
2)
MTSR delay from ASCLKO
shifting edge
t
t
t
t
51 CC
510 CC
52 SR
53 SR
-65
-65
150
-10
-
-
-
-
65
65
-
ns
ns
ns
ns
CL=50pF
CL=50pF
CL=50pF
CL=50pF
ASLSOn delay from the first
ASCLKO edge
MRST setup to ASCLKO
latching edge
MRST hold from ASCLKO
latching edge
-
1) PLL Jitter not included. Should be considered additionally, corresponding to the used baudrate. The duty cycle can be
adjusted using the BITCON.SAMPLEPOINT bitfield with the finest granularity of TMAX = 1 / fMAX
.
2) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
Data Sheet
3-211
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationQSPI Timings, Master and Slave Mode
t50
ASCLKO
MTSR
t51
t51
t500
t52
t53
MRST
Data valid
Data valid
t510
ASLSO
ASCLIN_TmgMM.vsd
Figure 3-12 ASCLIN SPI Master Timing
3.20
QSPI Timings, Master and Slave Mode
This section defines the timings for the QSPI in the TC233 / TC234 / TC237.
It is assumed that SCLKO, MTSR, and SLSO pads have the same pad settings:
Table 3-32 Master Mode timing A1+ strong soft (sf) output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
20
Max.
SCLKO clock period 1)
t
t
50 CC
-
-
-
ns
ns
CL=25pF
CL=25pF
Deviation from the ideal duty
cycle 2) 3)
500 CC
-3
3
MTSR delay from SCLKO
shifting edge
t
51 CC
-4
-
-
-
-
4
4
-
ns
ns
ns
ns
CL=25pF
CL=25pF
CL=25pF
CL=25pF
SLSOn deviation from the ideal t510 CC
programmed position
-4
MRST setup to SCLK latching
edge 4)
t
52 SR
20 4)
-3 4)
MRST hold from SCLK latching t53 SR
-
edge
1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has
to be taken into account.
2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can
be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX
.
3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
4) For compensation of the average on-chip delay the QSPI module provides the bit fields ECONz.A, B and C.
Data Sheet
3-212
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationQSPI Timings, Master and Slave Mode
Table 3-33 Master Mode timing A1+ strong slow (sw) output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
80
Max.
SCLKO clock period 1)
t
t
50 CC
-
-
-
ns
ns
CL=50pF
CL=50pF
Deviation from the ideal duty
cycle 2) 3)
500 CC
-8
8
MTSR delay from SCLKO
shifting edge
t
51 CC
-12
-12
40 4)
-3
-
-
-
-
12
12
-
ns
ns
ns
ns
CL=50pF
CL=50pF
CL=50pF
CL=50pF
SLSOn deviation from the ideal t510 CC
programmed position
MRST setup to SCLK latching
edge 4)
t52 SR
MRST hold from SCLK latching t53 SR
-
edge
1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has
to be taken into account.
2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can
be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX
.
3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
4) For compensation of the average on-chip delay the QSPI module provides the bit fields ECONz.A, B and C.
Table 3-34 Master Mode timing A1+m/A1m output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
100
-3
Max.
SCLKO clock period 1)
t
t
50 CC
-
-
-
ns
ns
CL=50pF
CL=50pF
Deviation from the ideal duty
cycle 2) 3)
500 CC
3
MTSR delay from SCLKO
shifting edge
t
51 CC
-8
-
-
-
-
8
15
-
ns
ns
ns
ns
CL=50pF
CL=50pF
CL=50pF
CL=50pF
SLSOn deviation from the ideal t510 CC
programmed position
-15
50 4)
-5 4)
MRST setup to SCLK latching
edge 4)
t52 SR
MRST hold from SCLK latching t53 SR
-
edge
1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has
to be taken into account.
2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can
be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX
.
3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
4) For compensation of the average on-chip delay the QSPI module provides the bit fields ECONz.A, B and C.
Data Sheet
3-213
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationQSPI Timings, Master and Slave Mode
Table 3-35 Master Mode Weak output pads
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
1000
-25
Max.
-
SCLKO clock period 1)
t
t
50 CC
-
-
ns
ns
CL=50pF
CL=50pF
Deviation from the ideal duty
cycle 2) 3)
500 CC
25
MTSR delay from SCLKO
shifting edge
t
51 CC
-65
-
-
-
-
65
65
-
ns
ns
ns
ns
CL=50pF
CL=50pF
CL=50pF
CL=50pF
SLSOn deviation from the ideal t510 CC
programmed position
-65
MRST setup to SCLK latching
edge 4)
t
52 SR
150 4)
-10 4)
MRST hold from SCLK latching t53 SR
-
edge
1) Documented value is valid for master transmit or slave receive only. For full duplex the external SPI counterpart timing has
to be taken into account.
2) The PLL jitter is not included. It should be considered additionally, corresponding to the used baudrate. The duty cycle can
be adjusted using the bit fields ECONz.A, B and C with the finest granularity of TMAX = 1 / fMAX
.
3) Positive deviation lenghtens the high time and shortens the low time of a clock period. Negative deviation does the
opposite.
4) For compensation of the average on-chip delay the QSPI module provides the bit fields ECONz.A, B and C.
Table 3-36 Slave mode timing
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
4 x TMAX
40
Max.
SCLK clock period
SCLK duty cycle
t
t
t
54 SR
-
-
-
-
ns
%
55/t54 SR
56 SR
60
-
MTSR setup to SCLK latching
edge
3
ns
MTSR hold from SCLK latching t57 SR
edge
3
3
3
-
-
-
-
-
-
ns
ns
ns
SLSI setup to first SCLK shift
edge
t
t
t
58 SR
59 SR
60 CC
SLSI hold from last SCLK
latching edge
MRST delay from SCLK shift
edge
5
-
-
-
-
-
50
20
40
150
9
ns
ns
ns
ns
ns
A1+m/A1m; CL=50pF
A1+sf; CL=25pF
3
5
A1+sw; CL=50pF
10
-
A1+w/A1w; CL=50pF
SLSI to valid data on MRST
t
61 SR
Data Sheet
3-214
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationQSPI Timings, Master and Slave Mode
t50
t500
0.5 VDD3
SCLK1)2)
MTSR1)
t51
SAMPLING POINT
0.5 VDD3
t52
t53
MRST1)
Data valid
Data valid
t510
SLSOn2)
0.5 VDD3
1) This timing is based on the following setup : ECON.CPH = 1, ECON.CPOL = 0, ECON.B=0 (no sampling point delay).
2) t510 is the deviation from the ideal position configured with the leading delay , BACON.LPRE and BACON.LEAD > 0.
QSPI_TmgMM_EP.vsd
Figure 3-13 Master Mode Timing
t54
Last latching
SCLK edge
First latching
SCLK edge
First shift
SCLK edge
SCLKI1)
0.5 VDD3
t55
t55
t56
t56
t57
t57
Data
valid
Data
valid
MTSR1)
MRST1)
SLSI
t60
t60
0.5 VDD3
t58
t59
t61
1) This timing is based on the following setup : ECON.CPH = 1, ECON.CPOL = 0.
QSPI_TmgSM_EP.vsd
Figure 3-14 Slave Mode Timing
Data Sheet
3-215
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEthernet Interface (ETH) Characteristics
3.21
Ethernet Interface (ETH) Characteristics
3.21.1
ETH Measurement Reference Points
ETH Clock
ETH I/O
1.4
2.0
V
1.4 V
V
2.0
V
0.8
V
0.8
V
tR
tF
ETH_Testpoints.vsd
Figure 3-15 ETH Measurement Reference Points
Data Sheet
3-216
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEthernet Interface (ETH) Characteristics
3.21.2
ETH Management Signal Parameters (ETH_MDC, ETH_MDIO)
Table 3-37 ETH Management Signal Parameters
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
400
160
160
10
Max.
ETH_MDC period
ETH_MDC high time
ETH_MDC low time
t1 CC
t2 CC
t3 CC
-
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
CL=25pF
CL=25pF
CL=25pF
CL=25pF
CL=25pF
CL=25pF
-
-
ETH_MDIO setup time (output) t4 CC
ETH_MDIO hold time (output) t5 CC
ETH_MDIO data valid (input) t6 SR
-
10
-
0
300
t1
t3
t2
ETH_MDC
ETH_MDIO
sourced by controller :
ETH_MDC
t4
t5
ETH_MDIO
(output )
Valid Data
ETH_MDIO sourced by PHY:
ETH_MDC
t6
ETH_MDIO
(input )
Valid Data
ETH_Timing-Mgmt.vsd
Figure 3-16 ETH Management Signal Timing
Data Sheet
3-217
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEthernet Interface (ETH) Characteristics
3.21.3
ETH MII Parameters
In the following, the parameters of the MII (Media Independent Interface) are described.
Table 3-38 ETH MII Signal Timing Parameters
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Clock period
t7 SR
40
-
-
-
-
-
-
-
ns
ns
ns
ns
ns
ns
CL=25pF;
baudrate=100Mbps
400
14
-
CL=25pF;
baudrate=10Mbps
Clock high time
Clock low time
t8 SR
t9 SR
26
CL=25pF;
baudrate=100Mbps
140 1)
14
260 2)
26
CL=25pF;
baudrate=10Mbps
CL=25pF;
baudrate=100Mbps
140 1)
260 2)
CL=25pF;
baudrate=10Mbps
Input setup time
Input hold time
t
t
t
10 SR
11 SR
12 CC
10
10
0
-
-
-
-
ns
ns
ns
CL=25pF
CL=25pF
CL=25pF
-
Output valid time
25
1) Defined by 35% of clock period.
2) Defined by 65% of clock period.
t7
t9
t8
ETH_MII_RX_CLK
ETH_MII_TX_CLK
ETH_MII_RX_CLK
t10
t11
ETH_MII_RXD[3:0]
ETH_MII_RX_DV
ETH_MII_RX_ER
(sourced by PHY )
Valid Data
ETH_MII_TX_CLK
t12
ETH_MII_TXD[3:0]
ETH_MII_TXEN
Valid Data
(sourced by controller )
ETH_Timing-MII.vsd
Figure 3-17 ETH MII Signal Timing
Data Sheet
3-218
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationEthernet Interface (ETH) Characteristics
3.21.4
ETH RMII Parameters
In the following, the parameters of the RMII (Reduced Media Independent Interface) are described.
Table 3-39 ETH RMII Signal Timing Parameters
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
ETH_RMII_REF_CL clock
period
t
13 CC
20
-
-
-
-
-
ns
ns
ns
ns
CL=25pF; 50ppm
CL=25pF
ETH_RMII_REF_CL clock high t14 CC
time
7 1)
7 1)
4
13 2)
13 2)
-
ETH_RMII_REF_CL clock low t15 CC
time
CL=25pF
ETHTXEN, ETHTXD[1:0],
ETHRXD[1:0], ETHCRSDV,
ETHRXER; setup time
t
t
16 CC
17 CC
CL=25pF
ETHTXEN, ETHTXD[1:0],
ETHRXD[1:0], ETHCRSDV,
ETHRXER; hold time
2
-
-
ns
CL=25pF
1) Defined by 35% of clock period.
2) Defined by 65% of clock period.
t13
t15
t14
ETH_RMII_REF_CL
ETH_RMII_REF_CL
t16
t17
ETHTXEN,
ETHTXD[1:0],
ETHRXD[1:0],
ETHCRSDV,
ETHRXER
Valid Data
ETH_Timing-RMII.vsd
Figure 3-18 ETH RMII Signal Timing
Data Sheet
3-219
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationE-Ray Parameters
3.22
E-Ray Parameters
The timings of this section are valid for the strong driver and sharp edge settings of the output drivers with CL =
25 pF.
Table 3-40 Transmit Parameters
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Rise time of TxEN
Fall time of TxEN
tdCCTxENRise2
5 CC
-
-
-
-
9
ns
ns
ns
CL=25pF
tdCCTxENFall25
CC
-
-
9
9
CL=25pF
Sum of rise and fall time
tdCCTxRise25+
20% - 80%; CL=25pF
dCCTxFall25
CC
Sum of delay between TP1_FF tdCCTxEN01
-
-
-
-
25
25
ns
ns
and TP1_CC and delays
derived from TP1_FFi, rising
edge of TxEN
CC
Sum of delay between TP1_FF tdCCTxEN10
and TP1_CC and delays
derived from TP1_FFi, falling
edge of TxEN
CC
Asymmetry of sending
t
tx_asym CC -2.45
-
-
2.45
25
ns
ns
CL=25pF
Sum of delay between TP1_FF tdCCTxD01
-
-
-
and TP1_CC and delays
derived from TP1_FFi, rising
edge of TxD
CC
Sum of delay between TP1_FF tdCCTxD10
-
-
25
9
ns
ns
and TP1_CC and delays
derived from TP1_FFi, falling
edge of TxD
CC
TxD signal sum of rise and fall ttxd_sum CC
time at TP1_BD
Table 3-41 Receive Parameters
Parameter
Symbol
Values
Unit
Note / Test Condition
Min.
Typ.
Max.
Acceptance of asymmetry at
receiving part
tdCCTxAsymAcc -30.5
ept25 SR
-
43.0
ns
ns
%
%
CL=25pF
CL=15pF
Acceptance of asymmetry at
receiving part
tdCCTxAsymAcc -31.5
ept15 SR
-
-
-
44.0
70
Threshold for detecting logical TuCCLogic1
high SR
Threshold for detecting logical TuCCLogic0
35
30
65
low
SR
Data Sheet
3-220
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationE-Ray Parameters
Table 3-41 Receive Parameters (cont’d)
Parameter Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Sum of delay between TP4_CC tdCCRxD01
-
-
10
ns
and TP4_FF and delays
derived from TP4_FFi, rising
edge of RxD
CC
Sum of delay between TP1_CC tdCCRxD10
-
-
10
ns
and TP1_CC and delays
derived from TP4_FFi, falling
edge of RxD
CC
Data Sheet
3-221
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationFlash Parameters
3.23
Flash Parameters
Program Flash program and erase operation is only allowed up the TJ = 150°C.
Table 3-42 Flash
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Program Flash Erase Time per tERP CC
logical sector
-
-
-
1
-
s
s
cycle count < 1000
0.207 +
0.003 * (S
[KByte]) /
(fFSI
cycle count < 1000, for
sector of size S
[MHz])1)
Program Flash Erase Time per tMERP CC
Multi-Sector Command
-
-
-
1
-
s
s
Forconsecutivelogical
sectors in a physical
sector, cycle count <
1000
0.207 +
0.003 * (S
[KByte]) /
(fFSI
Forconsecutivelogical
sector range of size S
in a physical sector,
cycle count < 1000
[MHz])1)
Program Flash program time
per page in 3.3 V mode
t
t
PRP3 CC
-
-
-
-
-
-
81 +
3400/(fFSI
[MHz])
µs
µs
s
32 Byte
Program Flash program time
per burst in 3.3 V mode
PRPB3 CC
410 +
12000/(fF
SI [MHz])
256 Byte
Program Flash program time
for 1 MByte with burst
tPRPB3_1MB
CC
2.2
Derived value for
documentation
programming in 3 V mode
excluding communication
purpose, valid for fFSI =
100MHz
Write Page Once adder
t
ADD CC
-
-
-
-
15 +
500/(fFSI
[MHz])
µs
Adder to Program
Time when using Write
Page Once
Program Flash suspend to read tSPNDP CC
latency
12000/(fF µs
SI [MHz])
For Write Burst, Verify
Erased and for multi-
(logical) sector erase
commands
Data Flash Erase Time per
Sector 2)
t
ERD CC
-
-
0.12 +
0.08/(fFSI
[MHz])1)
-
s
s
cycle count < 1000
0.57 +
0.928 +
cycle count < 125000
0.15/(fFSI 0.15/(fFSI
[MHz])1)
[MHz])
Data Sheet
3-222
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationFlash Parameters
Table 3-42 Flash (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Data Flash Erase Time per
Multi-Sector Command 2)
t
MERD CC
-
0.12 +
-
s
Forconsecutivelogical
sector range of size S,
cycle count < 1000
0.01 * (S
[KByte]) /
(fFSI
[MHz])1)
-
0.57 +
0.019 * (S 0.019 * (S
[KByte]) / [KByte]) /
0.928 +
s
Forconsecutivelogical
sector range of size S,
cycle count < 125000
(fFSI
(fFSI
[MHz])
[MHz])1)
Data Flash erase disturb limit
N
DFD CC
-
-
-
-
50
cycles
µs
Program time data flash per
page 3)
t
t
t
PRD CC
50 +
2500/(fFSI
[MHz]) 3)
8 Byte
Data Flash program time per
burst 3)
PRDB CC
-
-
96 +
4400/(fFSI
[MHz]) 3)
µs
32 Bytes
Data Flash suspend to read
latency
SPNDD CC
-
-
-
-
-
-
12000/(fF µs
SI [MHz])
Wait time after margin change tFL_MarginDel
-
10
-
µs
CC
Program Flash Retention Time, tRET CC
Sector
20
years
Max. 1000
erase/program cycles
Data Flash Endurance per
EEPROMx sector 4)
NE_EEP10
CC
125000
20
-
cycles Max. data retention
time 10 years
UCB Retention Time
t
RTU CC
-
years
Max. 100
erase/program cycles
per UCB, max 400
erase/program cycles
in total
Data Flash access delay
Data Flash ECC Delay
t
t
t
t
DF CC
-
-
-
-
-
-
-
-
100
20
ns
ns
ns
ns
see
PMU_FCON.WSDFLA
SH
DFECC CC
see
PMU_FCON.WSECD
F
Program Flash access delay
Program Flash ECC delay
PF CC
30
see
PMU_FCON.WSPFLA
SH
PFECC CC
10
see
PMU_FCON.WSECP
F
Data Sheet
3-223
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationFlash Parameters
Table 3-42 Flash (cont’d)
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
Number of erase operations on NERD0 CC
DF0 over lifetime
-
-
750000
cycles
°C
Junction temperature limit for
PFlash program/erase
operations
T
JPFlash SR
-
-
150
1) All typical values were characterised, but are not tested. Typical values are safe median values at room temperature
2) Under out-of-spec conditions (e.g. over-cycling) or in case of activation of WL oriented defects, the duration of erase
processes may be increased by up to 50%.
3) Time is not dependent on program mode (5V or 3.3V).
4) Only valid when a robust EEPROM emulation algorithm is used. For more details see the Users Manual.
Data Sheet
3-224
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPackage Outline
3.24
Package Outline
292 x
0.5 ±0 .0 5
M
0.15
0.08
C A B
C
1.7 MAX
0.1 C
17 ±0.1
M
B
A
20
19
18
17
16
15
14
13
12
11
10
9
CODE
8
7
292 x
0.15
6
5
4
3
COPLANARITY
2
1
Y W V U T R P N ML K J HG F E D C B A
19 x 0.8 = 15.2
INDEX
INDEX MARKING
(LASERED )
0.8
MARKING
C
0.33 MIN
STANDOFF
Figure 3-19 Package Outlines PG-LFBGA-292-6
Data Sheet
3-225
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPackage Outline
Figure 3-20 Package Outlines PG-TQFP-144-27
Table 3-43 Exposed Pad Dimensions
Ex; vaild for Feature Package L and LP (nominal EPad size)
Ey; vaild for Feature Package L and LP (nominal EPad size)
Ax; vaild for Feature Package L and LP (solder able EPad size)
Ay; vaild for Feature Package L and LP (solder able EPad size)
5.7 mm ± 50 µm
5.7 mm ± 50 µm
4.9 mm ± 50 µm
4.9 mm ± 50 µm
Note:It is recommended to use dimensions Ex and Ey for board layout considerations. Solder wetting between
Ex / Ey and Ax / Ay and lead between Ex / Ey and Ax / Ay will not case any harm.
Data Sheet
3-226
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPackage Outline
Figure 3-21 Package Outlines PG-TQFP-100-23
Table 3-44 Exposed Pad Dimensions
Ex; vaild for Feature Package L, LC, LP, S, and SP (nominal EPad size)
Ey; vaild for Feature Package L, LC, LP, S, and SP (nominal EPad size)
Ax; vaild for Feature Package L, LC, LP, S, and SP (solder able EPad size)
Ay; vaild for Feature Package L, LC, LP, S, and SP (solder able EPad size)
5.7 mm ± 50 µm
5.7 mm ± 50 µm
4.9 mm ± 50 µm
4.9 mm ± 50 µm
Note:It is recommended to use dimensions Ex and Ey for board layout considerations. Solder wetting between
Ex / Ey and Ax / Ay and lead between Ex / Ey and Ax / Ay will not case any harm.
You can find all of our packages, sorts of packing and others in our Infineon Internet Page “Products”:
http://www.infineon.com/products.
3.24.1
Package Parameters
Table 3-45 Thermal Characteristics of the Package
Device
Package
RQJCT1)
RQJCB1) RQJA
Unit
Note
TC233
PG-TQFP-100-23
21.2
12.1
30.42)
K/W
with soldered
exposed pad and
internal pass device
11.9
2.9
20.42)
K/W
with soldered
exposed pad and
DCDC EVR
Data Sheet
3-227
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationPackage Outline
Table 3-45 Thermal Characteristics of the Package
Device
Package
RQJCT1)
RQJCB1) RQJA
Unit
Note
TC234
PG-TQFP-144-27
20.9
11.7
30.02)
K/W
with soldered
exposed pad and
internal pass device
11.7
2.8
19.82)
K/W
with soldered
exposed pad and
DCDC EVR
TC237
PG-LFBGA-292-6
13.7
7.6
21.0
14.1
33.12)
25.42)
K/W
K/W
with internal pass
device
with DCDC EVR
1) The top and bottom thermal resistances between the case and the ambient (RTCAT, RTCAB) are to be combined with the
thermal resistances between the junction and the case given above (RTJCT, RTJCB), in order to calculate the total thermal
resistance between the junction and the ambient (RTJA). The thermal resistances between the case and the ambient (RTCAT
,
R
TCAB) depend on the external system (PCB, case) characteristics, and are under user responsibility.
The junction temperature can be calculated using the following equation: TJ = TA + RTJA * PD, where the RTJA is the total
thermal resistance between the junction and the ambient. This total junction ambient resistance RTJA can be obtained from
the upper four partial thermal resistances.
Thermal resistances as measured by the ’cold plate method’ (MIL SPEC-883 Method 1012.1).
2) Value is defined in accordance with JEDEC JESD51-3, JESD51-5, and JESD51-7.
Data Sheet
3-228
V 1.0 2017-03
TC233 / TC234 / TC237
Electrical SpecificationQuality Declarations
3.25
Quality Declarations
Table 3-46 Quality Parameters
Parameter
Symbol
Values
Typ.
Unit
Note / Test Condition
Min.
Max.
24500
2000
Operation Lifetime
tOP
-
-
-
-
hour
V
ESD susceptibility according to VHBM
Conforming to
Human Body Model (HBM)
JESD22-A114-B
ESD susceptibility according to VCDM
Charged Device Model (CDM)
-
-
-
-
-
-
500
750
3
V
V
for all other balls/pins;
conforming to
JESD22-C101-C
for corner balls/pins;
conforming to
JESD22-C101-C
Moisture Sensitivity Level
MSL
Conforming to Jedec
J-STD--020C for 240C
Data Sheet
3-229
V 1.0 2017-03
TC233 / TC234 / TC237
HistoryChanges from Version TC23x_DS_v1.1 to Version TC23xAC_DS_v1.0
4
History
4.1
Changes from Version TC23x_DS_v1.1 to Version TC23xAC_DS_v1.0
This Data Sheet is only valid for the Feature Packages L, LC, LP, S, and SP.
Feature Packages S and SP are newly added.
•
•
•
PG-LFBGA-292-6 Package Varinat Pin Configuration of TC237x
Remove pin U17 from the NC list
Overload
–
–
Remove parameter IING
changes in table’ Class_S’ of Standard_Pads
–
–
add footenote ‘ VILx = 0.65 * VDDM’ to VIHS
add footenote ‘ VILx = 0.41 * VDDM’ to VILS
•
•
Back-up Clock
Add parameter fBACKSS
EVR
Update footnote of EVR to 'It is recommended to place the flying capacitor close to the pins without vias to
–
–
have minimal routing resistance from pin to the capacitor terminal of less than 25mOhm. Likewise it is
recommended to limit the routing resistance to input and output capacitor is to less than 25mOhm.'
•
•
EVR/LDO
–
Update footnote of LDO to 'LDO operation is only possible for TJ≤150°C.'
Changes in table 'VOUTT TC23xAC' of EVR/LDO
–
Change of VOUTT13 from load equal to IDD of max power pattern; either TJ≤150°C and pass device=on chip
or TJ≤170°C and pass device=off chip to load equal to IDD of max power pattern; pass device=on chip
•
•
•
VADC
–
–
–
Add parameter tWU
Add parameter RMDU
Add parameter RMDD
VADC_33
–
–
–
Add parameter tWU
Add parameter RMDU
Add parameter RMDD
Power Supply
–
–
Change max value of IEVRSB from 650 µA to 150 µA
Change note of IEVRSB from 'Standby RAM is active. Power to remaining domains switched off. TJ =25°C'
to 'Standby RAM is active. Power to remaining domains switched off. TJ = 25°C; VEVRSB = 5V'
–
–
Change max value of IDDPORST from 70 mA to 85 mA for Note ‘valid for Feature Package L, LC, and LP;
TJ=165°C’
Change max value of IDDPORST from 45 mA to 60 mA for Note ‘valid for Feature Package L, LC, and LP;
TJ=150°C’
Data Sheet
4-231
V 1.0 2017-03
TC233 / TC234 / TC237
HistoryChanges from Version TC23x_DS_v1.1 to Version TC23xAC_DS_v1.0
–
Change max value of IDDPORST from 25 mA to 40 mA for Note ‘valid for Feature Package L, LC, and LP;
TJ=125°C’
–
–
Update formulas 3.2 and 3.3
add formulas 3.4 and 3.5
Data Sheet
4-232
V 1.0 2017-03
w w w . i n f i n e o n . c o m
Published by Infineon Technologies AG
相关型号:
SAK-TC234L-24F200N AC
SAK-TC234L-24F200N AC 属于第一代 Aurix TC23xL 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC23xL 系列属于第一代 TC2xx Aurix。TC23xL 系列产品配备 200 MHz TriCore、3.3V 单供电电压和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。
INFINEON
SAK-TC234L-32F200F AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC234L-32F200N AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC234LC-24F133F AC
SAK-TC234LC-24F133F AC 属于第一代 Aurix™ TC23xL 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC23xL 系列属于第一代 Tc2xx Aurix™。TC23xL 系列产品配备 200 MHz TriCore、3.3V 单供电电压和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。
INFINEON
SAK-TC234LP-16F200F AC
SAK-TC234LP-16F200F AC 属于第一代 Aurix TC23xL 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC23xL 系列属于第一代 TC2xx Aurix。TC23xL 系列产品配备 200 MHz TriCore、3.3V 单供电电压和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。
INFINEON
SAK-TC234LP-24F200F AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC234LP-32F200F AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC234LP-32F200N AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC237L-32F200S AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC237LP-32F200N AC
工业和消费者应用从未如此美好。全新 TriCore TC22xl 具有先进的安全功能,支持系统安全级别高达 ASIL-D。其创新多核心架构基于三个独立 32 位 TriCore™ CPU,设计满足极高的安全标准 (IEC61508/ISO26262),同时支持低成本到高性能器件扩展。其扩展能力支持为基础 PLC 和电机控制选择单核解决方案,为电梯和网络网关系统选择多核解决方案。AURIX 系列产品提供较宽的闪存、性能和外围设备选择,实现极佳的成本-性能配比。系统具有 160 MHz-6x300 MHz 性能、先进的定时单元、完全灵活的 PWM 生成和硬件输入捕获、英飞凌 SafeTcore 库安全软件和许多其他功能,提供的优势包括:
INFINEON
SAK-TC237LP-32F200S AC
SAK-TC237LP-32F200S AC 属于第一代 Aurix TC23xL 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC23xL 系列产品配备 200 MHz TriCore、3.3V 单电压供电和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。
INFINEON
SAK-TC264D-40F200N BC
SAK-TC266D-40F200N BC 属于第一代 Aurix TC26xD 系列产品。其创新多核心架构基于多达三个独立 32 位 TriCore CPU,专为满足极高的安全标准,同时大幅提高性能而设计。TC26xD 系列产品配备 200 MHz TriCore、5V 或 3.3V 单电压供电和强大的通用定时器模块 (GTM),旨在降低复杂度、实现同类产品中极其优秀的功耗并节省大量成本。
INFINEON
©2020 ICPDF网 联系我们和版权申明