SLE66C322PM5 [INFINEON]
Security & Chip Card ICs; 安全和芯片卡IC型号: | SLE66C322PM5 |
厂家: | Infineon |
描述: | Security & Chip Card ICs |
文件: | 总8页 (文件大小:37K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Security & Chip Card ICs
SLE 66C322P
16-Bit Security Controller
with Memory Management and Protection Unit
in 0.22 µm CMOS Technology
136-Kbytes ROM, 4352 bytes RAM, 32-Kbytes EEPROM
Short Product Information 08.01
SLE 66C322P Short Product Information
Ref.: SPI SLE 66C322P 0801.doc
This document contains preliminary information on a new product under development.
Details are subject to change without notice.
Revision History: Current Version 08.01
Previous Releases:
Page
Subjects (changes since last revision)
Important: Further information is confidential and on request. Please contact:
Infineon Technologies AG in Munich, Germany,
Security & Chip Card ICs,
Tel +49 - (0)89 234-80000
Fax +49 - (0)89 234-81000
E-Mail: security.chipcard.ics@infineon.com
Edition 2001
Published by Infineon Technologies AG, CC Applications Group
St.-Martin-Strasse 53, D-81541 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of
that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
SLE 66C322P
16-Bit Security Controller with MMU in 0.22µm CMOSTechnologie
136 Kbytes ROM, 4352 bytes RAM, 32 Kbytes EEPROM
Features
Slim-EEPROM
· 16-bit microcomputer in 0.22 µm CMOS
· Reading, erasing and writing byte by byte
technology
· Flexible page mode for 1 to 64 bytes
· Instruction set opcode compatible with
write/erase operation
standard SAB 8051 processor
· 32 bytes security area (OTP)
· Fast personalization mode
· Erase + Write time < 4.5 ms
· Enhanced 16-bit arithmetic
· Additional powerful instructions optimized
for chip card applications
· Minimum of 500.000 write/erase cycles at
· Dedicated, non-standard architecture with
execution time 6 times faster (18 times
by PLLmax) than standard SAB 8051
processor at external same clock
25°C
· Data retention for a minimum of 10 years
· EEPROM programming voltage generated on
chip
· 134 Kbyte User ROM for application
programs
Memory Management and Protection Unit
· Additional 2 Kbyte reserved ROM for
Resource Management System (RMS+
light) with intelligent EEPROM write/erase
routines
· Addressable memory up to 1 Mbyte
· Separation OS (system) and application
(user)
· System routines called by traps
· 32 Kbytes Slim-EEPROM
· 4 Kbytes XRAM, 256 Bytes IRAM
· OS can restrict access to peripherals in
application mode
· Memory Management and Protection
· Code execution from XRAM possible
Unit (MMU)
· CRC Module
· Interrupt Module
· Two 16-bit Autoreload Timer
· PLL
Security Features
Operation state monitoring mechanism
· Low and high voltage sensors
· Frequency sensors and filters
· Glitch Sensor
· Power saving sleep mode
· External clock frequency 1 to 7.5 MHz
for internal clock £ 10 MHz
· UART for handling serial interface in
accordance with ISO/IEC 7816 part 3
supporting transmission protocols T=1
and T=0
Memory Security
· 16 bytes security PROM, hardware protected
· I/O routines realized in software executable
· Supply voltage range: 2.7 V to 5.5 V
· Unique chip identification number for each
chip
· MED - memory encryption/decryption device
· Current consumption
for XRAM, ROM and EEPROM
< 10mA @ 5.5 V
< 6 mA @ 3.3 V
· True Random Number Generator with
Firmware test function
· Temperature range: -25 to +85°C
· ESD protection larger than 6 kV
· Security optimised layout and layout
scrambling
Short Product Information
3 / 8
08.01
SLE 66C322P
Document References
Testmode
· Confidential Data Book SLE 66CxxxP
· Qualification report
· Irreversible Lock - Out of testmode
· Chip delivery specification for wafer with
Anti Snooping
chip-layout (die size, orientation,...)
· Module specification containing description
· HW-countermeasures against SPA/DPA-,
Timing- and DFA-attacks (differential fault
analysis – DFA)
of package, etc.
· Qualification report module
· CRC – Module
· Non standard dedicated Smart Card CPU
Development Tools Overview
– Core
· Short
Product
Development Kit SDK CC
Information
Software
Support
· Short Product Information Card Emulator
CE66P
· HW-& SW-Tools (Emulator, ROM Monitor,
Card Emulator, Simulator, Softmasking)
· Short Product Information ROM Monitor
RM66P
· Application notes
· Short Product Information Emulator ET66P
Hitex or ET66P KSC
Supported Standards
· Short Product Information Smart Mask
Package
· ISO/IEC 7816
· EMV 2000
· GSM 11.1x
· ETS I TS 102 221
Short Product Information
4 / 8
08.01
SLE 66C322P
Ordering Information
Type
Package1
Voltage
Range
Temperature
Range
Frequency Range
(ext. Clock
frequency)
SLE 66C322P M5
M5
die
M5
die
M5
Die
2.7 V - 5.5 V – 25°C to + 70°C 1 MHz – 5 MHz
2.7 V - 5.5 V – 25°C to + 85°C 1 MHz – 5 MHz
2.7 V - 5.5 V – 25°C to + 70°C 1 MHz – 7.5 MHz
SLE 66C322P C
SLE 66C322P-T85 M5
SLE 66C322P-T85 C
SLE 66C322P-F7 M5
SLE 66C322P-F7 C
Production sites:
· Dresden SLE66CxxxP
· UMC Taiwan SLE66CxxxPU
1 available as wire-bonded module (M5) for embedding in plastic cards or as die (C) for customer packaging
Short Product Information
5 / 8
08.01
SLE 66C322P
Pin Configuration
VDD GND
CLK
RST
I/O
SLE
66C322P
Figure 1: Pin Configuration
Pin Definitions and Functions
Symbol
VCC
RST
Function
Operating voltage
Reset input
CLK
Processor clock input
Ground
GND
I/O
Bi-directional data port
Short Product Information
6 / 8
08.01
SLE 66C322P
General Description
SLE 66C322P is another member of Infineon Technologies high-end security controller family in
advanced 0.22 µm CMOS technology. The CPU provides the high efficiency of the SAB 8051-
instruction set extended by additional powerful instructions together with enhanced performance,
memory sizes and security features. The internal clock frequency can be adjusted up to 10 MHz
independent of the clock rate of the terminal with the help of the PLL.
The controller IC offers 134 Kbytes of User-ROM, 256 bytes internal RAM, 4096 bytes XRAM and
32 Kbytes Slim-EEPROM. The Memory Management and Protection Unit allows a secure
separation of the operating system and the applications. Furthermore the MMU makes a secure
downloading of applications possible after the personalization of a card. These new features meet
the requirements of the next generation of multi application operating systems. For code
compatibility to the SLE 66CxxS family, a transparent mode for the MMU is available which allows
you to keep the memory mapping of the SLE 66CxxS products.
ROM
136
Kbyte
Voltage
Clock
Reset
XRAM
4 Kbyte
EEPROM
32 Kbyte
UART
16-Bit CPU with
MMU
&
Address-/Data Bus
two
ECO 2000
Instruction Set
Sleep Mode Logic
Sensors/Filters
Interrupt
16-bit
Timer
CRC
RNG
PLL
Voltage Regulator
Figure 2: Block Diagram SLE 66C322P
The CRC module allows the easy generation of checksums according to ISO/IEC 3309 (16-Bit-
CRC). To minimize the overall power consumption, the chip card controller IC offers a sleep mode.
The UART supports the half-duplex transmission protocols T=0 and T=1 according to ISO/IEC
7816-3. All relevant transmission parameters can be adjusted by software, as e.g. the clock
division factor, direct/inverse convention and the number of stop bits. Additionally, the I/O port can
be driven by communication routines realized in software.
The random number generator (RNG) is able to supply the CPU with true random numbers under
all conditions.
As an important measure, the chip provides a new and enhanced level of on-chip security features.
Short Product Information
7 / 8
08.01
SLE 66C322P
In conclusion, the SLE 66C322P fulfills the requirements of today's chip card applications, as
GSM, and offers a powerful platform for future multi application cards. The SLE 66C322P
integrates outstanding memory sizes, additional peripherals in combination with enhanced
performance and optimized power consumption on a minimized die size. Therefore, the SLE
66C322P offers the basis for a generation of new chip card applications.
Short Product Information
8 / 8
08.01
相关型号:
©2020 ICPDF网 联系我们和版权申明