TLE4946-2K [INFINEON]
High Precision Hall Effect Latch; 高精度霍尔效应锁存
| 型号： | TLE4946-2K |
| 厂家： | 
Infineon |
| 描述： | High Precision Hall Effect Latch |
| 文件： | 总12页 (文件大小：1069K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
September 2008
TLE4946-2K
High Precision Hall Effect Latch
TLE4946-2K
Final
Datasheet
Rev.1.0
Sensors
Edition 2008-09-18
Published by
Infineon Technologies AG
81726 München, Germany
© 2007 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
TLE4946-2K
TLE4946-2K High Precision Hall Effect Latch
Revision History: 2008-09-18, Rev.1.0
Previous Version:
Page
Subjects (major changes since last revision)
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
sensors@infineon.com
FinalDatasheet
3
Rev.1.0, 2008-09-18
TLE4946-2K
1
Product Description 5
Overview 5
1.1
1.2
1.3
Features 5
Target Applications 5
2
Functional Description 5
General 5
2.1
2.2
2.3
2.4
2.5
2.6
Pin Configuration 6
Pin Description 6
Block Diagram 6
Operating Modes and States 7
Functional Block Description 7
3
Specification 8
3.1
3.2
3.3
Absolute Maximum Ratings 8
Operating Range 9
Characteristics 9
4
4.1
Package Information 10
Package Outline 10
FinalDatasheet
4
Rev.1.0, 2008-09-18
High Precision Hall Effekt Latch
TLE4946-2K
1
Product Description
1.1
Overview
The TLE4946-2K is a high precision Hall effect latch
with highly accurate switching thresholds for operating
temperatures up to 150°C.
1.2
Features
•
•
•
•
•
•
•
•
•
•
•
2.7 V to 24 V supply voltage operation
Operation from unregulated power supply
High sensitivity and high stability of the magnetic switching points
High resistance to mechanical stress by active error compensation
Reverse battery protection (– 18V)
Superior temperature stability
Peak temperatures up to 195°C without damage
Low jitter (typ. 1 µs)
High ESD performance (± 4kV HBM)
Digital output signal
SMD package SC59
1.3
Target Applications
The TLE4946-2K is an integrated circuit Hall-effect sensor with low switching thresholds and low hysteresis which
make it ideally suited to detect the rotor position in a BLDC motor commutation application.
2
Functional Description
2.1
General
Precise magnetic switching thresholds and high temperature stability are achieved by active compensation circuits
and chopper techniques on chip. Offset voltages, generated by temperature induced stress or overmolding are
canceled and high accuracy is achieved. The IC has an open collector output stage with 20mA current sink
capability. A wide operating voltage range form 2.7V to 18V with reverse polarity protection up to -18V makes the
device suitable for a wide range of applications. A magnetic south pole with field strength above Bop turns the
output on and a magnetic north pole exceeding Brp turns it off.
Product Name
Product Type
Ordering Code
Package
Hall Effect Latch
TLE4946-2K
SP000472424
SC59
FinalDatasheet
5
Rev.1.0, 2008-09-18
TLE4946-2K
Functional Description
2.2
Pin Configuration
Center of
Sensitive Area
3
± 0.15
0.8
1
2
± 0.15
1.5
SC59
Figure 1
Pin Configuration and sensitive area (Top View, Figure not to Scale)
2.3
Pin Description
Table 1
Pin Description
Pin or Ball Name
No.
Pin
Type
Function
Comments
1
2
3
Vs
Q
GND
I
O
I
Supply voltage
Output
Ground
2.4
Block Diagram
VS
Voltage Regulator
reverse polarity protected
Bias and
Compensation
Circuits
Oscillator
and
Sequencer
Q
Ref
GND
Low
Pass
Filter
Comparator
with
Amplifier
Chopped
Hysteresis
Hall Probe
Figure 2
TLE4946-2K Block Diagram
FinalDatasheet
6
Rev.1.0, 2008-09-18
TLE4946-2K
Functional Description
2.5
Operating Modes and States
Field Direction Definition:
Positive magnetic fields are related with the south pole of the magnet to the branded side of package.
Applied
Magnetic
Field
BOP
BRP
td
td
tf
tr
VQ
90%
10%
Figure 3
Timing diagram
VQ
B
Brp
0
Bop
Figure 4
Output Signal
2.6
Functional Block Description
The chopped Hall IC switch comprises a Hall probe, bias generator, compensation circuits, oscillator and output
transistor.
The bias generator provides currents for the Hall probe and the active circuits. Compensation circuits stabilize the
temperature behavior and reduce technology variations.
The Active Error Compensation rejects offsets in signal stages and the influence of mechanical stress to the Hall
probe caused by molding and soldering processes and other thermal stresses in the package.
This chopper technique together with the threshold generator and the comparator ensure high accurate magnetic
switching points
FinalDatasheet
7
Rev.1.0, 2008-09-18
TLE4946-2K
Specification
3
Specification
3.1
Absolute Maximum Ratings
Table 2
Parameter
Absolute Maximum Ratings
Symbol
Values
Typ.
Unit Note/Test Condition
Min.
-40
–
–
–
Max.
150
155
165
175
195
Max. junction temperature
TJ
–
–
–
–
–
°C
for 2000 h (not additive)
for 1000 h (not additive)
for 168 h (not additive)
for 3 x 1 h (additive)
–
Supply voltage
VDD
-18
-18
-18
–
–
–
18
24
26
V
for 1h, Rs ≥ 200Ω
for 5min, Rs ≥ 200Ω
Supply current through
protection device
Output voltage
IS
– 50
–
+ 50
mA
V
VQ
-0.7
-0.7
–
–
18
26
for 5min @ 1.2kΩ pull
up
Storage temperature
Magnetic flux density
ESD robustness
HBM: 1.5 kΩ, 100 pF
TS
B
VESD,HBM
– 40
4
–
–
150
unlimited mT
kV
°C
According to
EIA/JESD22-A114-B
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the integrated circuit.
FinalDatasheet
8
Rev.1.0, 2008-09-18
TLE4946-2K
Specification
3.2
Operating Range
The following operating conditions must not be exceeded in order to ensure correct operation of the TLE4946-2K.
All parameters specified in the following sections refer to these operating conditions unless otherwise mentioned.
Table 3
Operating Range
Parameter
Symbol
Values
Typ.
–
–
–
–
Unit
Note/ Test Condition
Min.
2.7
– 0.7
– 40
0
Max.
18
18
150
20
Supply voltage
Output voltage
Junction temperature
Output current
VS
VQ
Tj
V
V
°C
mA
IQ
3.3
Characteristics
Product characteristics involve the spread of values guaranteed within the specified voltage and ambient
temperature range. Typical characteristics are the median of the production (at Vs = 12V and TA= 25°C ).
Table 4
Parameter
Electrical Characteristics
Symbol
Values
Typ.
4
0.2
0.3
0.05
0.02
0.4
320
–
Unit
Note/ Test Condition
Min.
2
0
–
–
–
–
–
0
Max.
6
1
0.6
10
1
Supply current
IS
mA
mA
V
µA
µs
VS = 2.7 V ... 18 V
VS = – 18 V
IQ = 20 mA
for VQ = 18 V
RL = 1.2 kΩ;
CL = 50 pF
Reverse current
Output saturation voltage
Output leakage current
Output fall time
ISR
VQSAT
IQLEAK
tf
Output rise time
Chopper frequency
Switching frequency
Delay time 2)
tr
1
–
µs
fOSC
fSW
td
kHz
kHz
µs
15 1)
–
–
13
Output jitter 3)
tQJ
–
1
–
µsRMS Typical value for
square wave signal
1 kHz
Power-on time 4)
tPON
RthJA
–
–
13
100
–
µs
K/W
VS ≥ 2.7 V
Thermal resistance 5)
1) To operate the sensor at the max. switching frequency, the value of the magnetic signal amplitude must be 1.4 times higher
than for static fields.
This is due to the - 3 dB corner frequency of the low pass filter in the signal path.
2) Systematic delay between magnetic threshold reached and output switching
3) Jitter is the unpredictable deviation of the output switching delay
4) Time from applying V ≥ 2.7 V to the sensor until the output state is valid
S
5) Thermal resistance from junction to ambient
FinalDatasheet
9
Rev.1.0, 2008-09-18
TLE4946-2K
Package Information
Table 5
Parameter
Magnetic Characteristics
Symbol
Values
Typ.
2.0
-2.0
4
Unit
Note/ Test Condition
Min.
0.5
Max.
3.5
Operate point
Release point
Hysteresis
BOP
BRP
BHYS
mT
-3.5
1.0
-0.5
6.0
mT
mT
Magnetic Offset1)
BOFF
-1.5
0
1.5
mT
Temperature compensation of
magn. thresholds
TC
-350
ppm/°C
Repeatability of magnetic
BREP
20
µTRMS
thresholds 2)
1) Boff = (Bop + Brp)/2
2) BREP is equivalent to the noise constant
4
Package Information
4.1
Package Outline
Branded Side
Year (y) = 0...9
Month (m) = 1...9,
O - October
46 2
06
N - November
D - December
d: Distance chip to upper side of IC:
±0.1
d = 0.56
mm
AEA03244
Figure 5
Marking of TLE4946-2K and distance of chip to upper side of IC
FinalDatasheet
10
Rev.1.0, 2008-09-18
TLE4946-2K
Package Information
±0.1
1.1
±0.1
3
0.15 MAX.
0.2+0.1
0.1
+0.05
-0.1
3x0.4
M
0.1
3
2
±0.15
0.45
1
+0.1
0.15
0.95
-0.05
0.95
(0.55)
0˚...8˚ MAX.
GPS09473
Figure 6
Package outline
0.8
0.8
1.2
0.8
1.2
0.8
Reflow Soldering
Wave Soldering
Figure 7
Footprint SC59 (SOT23 compatible)
FinalDatasheet
11
Rev.1.0, 2008-09-18
w w w . i n f i n e o n . c o m
Published by Infineon Technologies AG
相关型号：
TLE49462KHTSA1
Hall Effect Sensor, 0-3.5mT Min, 3.5mT Max, -0.7-18V, Bipolar, Plastic/Epoxy, Rectangular, 3 Pin, Surface Mount, SC-59, SOT-23, 3 PIN
INFINEON
TLE49462LHALA1
Hall Effect Sensor, 0-3.5mT Min, 3.5mT Max, Bipolar, Plastic/Epoxy, Rectangular, 3 Pin, Through Hole Mount, GREEN, PLASTIC, SSOP-3
INFINEON
TLE4946KHTSA1
Hall Effect Sensor, 0-19.2mT Min, 19.2mT Max, -0.7-18V, Rectangular, Surface Mount, SC-59, SOT-23, 3 PIN
INFINEON
©2020 ICPDF网 联系我们和版权申明