VINAXTM-A4 [INTEL]
Telecom Circuit,;
| 型号： | VINAXTM-A4 |
| 厂家： | 
INTEL |
| 描述： | Telecom Circuit, 电信 电信集成电路 |
| 文件： | 总2页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Product Brief
Lantiq™ VINAX™-L/-M
VDSL2/ADSL/2/2+ Central Office Chipset
Features
VINAX™ V2 is the newest generation of VDSL2/ADSL/2/2+ chipsets for Central Office based
applications. It includes dedicated variants for 17MHz and 30MHz applications. These options
allow system vendors to offer highly optimized VDSL2/ADSL2+ systems for Exchange, Cabinet,
and MxU market segments.
• Highly optimized chip sets matching all
VDSL2 profiles from 8a-d up to 30a
• Per port support of legacy ADSL/2/2+
backward compatibility
• 8 port (-M) and 4 port (-L) granularity
• Low power consumption
• Programmable transmit power up to
20.5dBm (with opt. LD supply)
• Extended US0 band up to 552kHz (Single/
Double/Quadruple US0)
• Region specific bandplans and
RFI-notches fully programmable
• Support for Long-Reach VDSL2
• 4 port (-M) and 2 port (-L) Ethernet PHY-
Layer bonding supported
• System support for Dual Latency
• Per port independent ATM and PTM framing
configuration
The -M and -L variants are optimized in terms of their density, power, and cost to support the
large-scale deployment of VDSL2 technology in next-generation telecom networks. Both variants
are based upon a 3-chip architecture, and support line-card densities of 48 ports or higher. They
are ADSL/2/2+ backwards compatible (up to 20.5dBm) and offer full programmability (PSD, band
plan, etc.) without any need for external filters. VINAX™-M has an 8 port granularity for high-
density Exchange and Cabinet applications whereas VINAX™-L has a 4-port granularity for lower-
density MxU applications.
To meet the increasing demand for IPTV and VoIP applications, VINAX™ V2 supports enhanced
Quality-Of-Service functionalities including Retransmission, Seamless-Rate-Adaptation, Dual
Latency, Pre-Emption, and Virtual Noise. To extend the range of VDSL2 long-haul applications,
VINAX™ V2 offers bonding functionality of 2 ports (VINAX™-L) or 4 ports (VINAX™-M).
• Pre-emption and per bearer
flow-control for improved system QoS
• On-Line reconfiguration including Seamless
Rate Adaptation (SRA) and Dynamic Rate
Repartitioning (DRR)
• Virtual noise for higher system stability
• Diagnostic modes DELT and SELT
• Worldwide bandplan requirements covered
with one single hybrid design
Applications
•
•
•
•
•
•
•
Central Office and Remote ATM/IP DSLAMs
Digital Loop Carrier (DLC)
Integrated Packet Voice & Data (IPVD) line cards
Multi Service Access Network Platforms (MSAN)
Multiple Dwelling/Tenant Units (MDU/MTU) networking
Optical Network Termination/Unit (ONU/ONT)
FTTC/FTTB & LAN extension
• Industrial temperature range from
-40°C up to +85°C
www.Lantiq.com
Product Brief
Lantiq™ VINAX™-L/-M
VDSL2/ADSL/2/2+ Central Office Chipset
Supported Standards
VINAX™-Architecture
• VDSL2 (G.993.2)
Lantiq™ VINAX™-L V2 (up to 30a profile)
• ADSL/2/2+ (G.992.1, G.992.3, G.992.5)
• VDSL1 (G.993.1, T1.424, TS 101 270)
• EFM (IEEE 802.3 ah)
Lantiq™
VINAX™-L1
4
• Retransmission G.998.4
Lantiq™
VINAX™-A4
Lantiq™
VINAX™-D4L
Lantiq™
CONVERGATE™
Lantiq™
VINAX™-L1
1
Interfaces
• R-MII, S-MII, SSS-MII
• POSPHY - L2
• MDIO, parallel host
Lantiq™ VINAXTM-M V2 (up to 17x profile)
• JTAG interface
Lantiq™
8
1
VINAX™-L1
Lantiq™
VINAX™-A8
Lantiq™
VINAX™-D8M
Lantiq™
CONVERGATE™
Lantiq™
VINAX™-L1
Product Summary
Product
Sales Code
PEF 88004
PEF 88008
PEF 88204
PEF 88208
PEF 88601
Description
Package
VINAXTM-D4L
VINAXTM-D8M
VINAXTM-A4
VINAXTM-A8
VINAXTM-L1
4-channel 30 MHz DFE
8-channel 17 MHz DFE
4-channel 30 MHz AFE
8-channel 17 MHz LD
1-channel 30 MHz LD
PG-LBGA-324-15
PG-LBGA-324-15
PG-LBGA-324-12
PG-LBGA-324-12
P-TSSOP-16
Legal Disclaimer The information given in this Product Brief shall in no event be
regarded as a guarantee of conditions or characteristics. With respect to any examples
or hints given herein, any typical values stated herein and/or any information regar-
ding the application of the device, Lantiq hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties of non-infringement of
intellectual property rights of any third party.
Warnings Due to technical requirements, components may contain dangerous
substances. For information on the types in question, please contact the nearest
Lantiq Office. Lantiq components may be used in life-support devices or systems
only with the express written approval of Lantiq, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system or
to affect the safety or effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body or to support and/or
maintain and sustain and/or protect human life. If they fail, it is reasonable to assume
that the health of the user or other persons may be endangered.
How to reach us: http://www.Lantiq.com
Published by Lantiq
85579 Neubiberg, Germany
Information For further information on technology, delivery terms and conditions
and prices, please contact the nearest Lantiq Office (www.Lantiq.com).
© 2009 Lantiq. All Rights Reserved.
Order Number: PB-e-0007-v1
相关型号：
VIO25-06P1
Insulated Gate Bipolar Transistor, 24.5A I(C), 600V V(BR)CES, N-Channel, ECOPAC-6
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明