EL5163ICZ-T7 [INTERSIL]
300MHz Low Power Current Feedback Amplifiers with Enable; 300MHz的低功耗电流反馈放大器与启用
| 型号： | EL5163ICZ-T7 |
| 厂家： | 
Intersil |
| 描述： | 300MHz Low Power Current Feedback Amplifiers with Enable |
| 文件： | 总9页 (文件大小：253K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EL5162, EL5163, EL5262, EL5263, EL5362
®
Data Sheet
September 8, 2005
FN7388.7
500MHz Low Power Current Feedback
Amplifiers with Enable
The EL5162, EL5163, EL5262, EL5263, and EL5362 are
current feedback amplifiers with a bandwidth of 500MHz.
This makes these amplifiers ideal for today’s high speed
video and monitor applications.
Features
• 500MHz -3dB bandwidth
• 4000V/µs slew rate
• 1.5mA supply current
• Single and dual supply operation, from 5V to 12V supply
span
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery-powered
equipment.
• Fast enable/disable (EL5162, EL5262 & EL5362 only)
• Available in SOT-23 packages
• Pb-Free plus anneal available (RoHS compliant)
The EL5162 also incorporates an enable and disable
function to reduce the supply current to 100µA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
• High speed, 1.4GHz product available (EL5167 &
EL5167)
• High speed, 4mA, 630MHz product available (EL5164 &
EL5165)
The EL5162 is available in 6-pin SOT-23 and 8-pin SO
packages, the EL5163 in 5-pin SOT-23 and SC-70
packages, the EL5262 in the 10-pin MSOP package, the
EL5263 in 8-pin MSOP and SO packages, and the EL5362
in 16-pin SO (0.150”) and QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
Applications
• Battery-powered equipment
• Handheld, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
EL5162, EL5163, EL5262, EL5263, EL5362
Ordering Information (Continued)
Ordering Information
TAPE &
TAPE &
REEL
PART NUMBER
PACKAGE
REEL
PKG. DWG. #
PART NUMBER
EL5162IS
PACKAGE
8-Pin SO
8-Pin SO
8-Pin SO
PKG. DWG. #
MDP0027
MDP0027
MDP0027
MDP0027
EL5263ISZ-T13
(See Note)
8-Pin SO
(Pb-Free)
13”
MDP0027
-
7”
13”
-
EL5162IS-T7
EL5162IS-T13
EL5263IY
8-Pin MSOP
8-Pin MSOP
8-Pin MSOP
-
7”
13”
-
MDP0043
MDP0043
MDP0043
MDP0027
EL5263IY-T7
EL5263IY-T13
EL5362IS
EL5162ISZ
(See Note)
8-Pin SO
(Pb-Free)
16-Pin SO
(0.150”)
EL5162ISZ-T7
(See Note)
8-Pin SO
(Pb-Free)
7”
13”
MDP0027
MDP0027
EL5362IS-T7
EL5362IS-T13
16-Pin SO
(0.150”)
7”
13”
-
MDP0027
MDP0027
MDP0027
EL5162ISZ-T13
(See Note)
8-Pin SO
(Pb-Free)
16-Pin SO
(0.150”)
EL5162IW-T7
6-Pin SOT-23
7” (3K pcs)
MDP0038
MDP0038
MDP0038
EL5162IW-T7A
6-Pin SOT-23 7” (250 pcs)
EL5362ISZ
(See Note)
16-Pin SO
(0.150”)
(Pb-Free)
EL5162IWZ-T7
(See Note)
6-Pin SOT-23
(Pb-Free)
7” (3K pcs)
EL5162IWZ-T7A 6-Pin SOT-23 7” (250 pcs)
MDP0038
EL5362ISZ-T7
(See Note)
16-Pin SO
(0.150”)
7”
MDP0027
MDP0027
(See Note)
(Pb-Free)
(Pb-Free)
EL5163IW-T7
EL5163IW-T7A
5-Pin SOT-23
7” (3K pcs)
MDP0038
MDP0038
MDP0038
EL5362ISZ-T13
(See Note)
16-Pin SO
(0.150”)
(Pb-Free)
13”
5-Pin SOT-23 7” (250 pcs)
EL5163IWZ-T7
(See Note)
5-Pin SOT-23
(Pb-Free)
7” (3K pcs)
EL5362IU
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
-
7”
13”
-
MDP0040
MDP0040
MDP0040
MDP0040
EL5163IWZ-T7A 5-Pin SOT-23 7” (250 pcs)
MDP0038
EL5362IU-T7
EL5362IU-T13
(See Note)
(Pb-Free)
5-Pin SC-70
5-Pin SC-70
EL5163IC-T7
EL5163IC-T7A
7” (3K pcs)
7” (250 pcs)
7” (3K pcs)
P5.049
P5.049
P5.049
EL5362IUZ
(See Note)
16-Pin QSOP
(Pb-Free)
EL5163ICZ-T7
(See Note)
5-Pin SC-70
(Pb-Free)
EL5362IUZ-T7
(See Note)
16-Pin QSOP
(Pb-Free)
7”
MDP0040
MDP0040
EL5163ICZ-T7A
(See Note)
5-Pin SC-70
(Pb-Free)
7” (250 pcs)
P5.049
EL5362IUZ-T13
(See Note)
16-Pin QSOP
(Pb-Free)
13”
EL5262IY
10-Pin MSOP
10-Pin MSOP
10-Pin MSOP
-
7”
13”
-
MDP0043
MDP0043
MDP0043
MDP0043
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
EL5262IY-T7
EL5262IY-T13
EL5262IYZ
(See Note)
10-Pin MSOP
(Pb-Free)
EL5262IYZ-T7
(See Note)
10-Pin MSOP
(Pb-Free)
7”
MDP0043
MDP0043
EL5262IYZ-T13
(See Note)
10-Pin MSOP
(Pb-Free)
13”
EL5263IS
8-Pin SO
8-Pin SO
8-Pin SO
-
7”
13”
-
MDP0027
MDP0027
MDP0027
MDP0027
EL5263IS-T7
EL5263IS-T13
EL5263ISZ
(See Note)
8-Pin SO
(Pb-Free)
EL5263ISZ-T7
(See Note)
8-Pin SO
(Pb-Free)
7”
MDP0027
FN7388.7
2
September 8, 2005
EL5162, EL5163, EL5262, EL5263, EL5362
Pinouts
EL5162
EL5162
(6-PIN SOT-23)
TOP VIEW
EL5163
(5-PIN SOT-23, SC-70)
TOP VIEW
(8-PIN SO)
TOP VIEW
NC
IN-
1
2
3
4
8
7
6
5
CE
OUT
VS-
IN+
1
2
3
6
5
4
VS+
CE
OUT
VS-
IN+
1
2
3
5
VS+
VS+
OUT
NC
-
+
+
-
+
-
IN+
VS-
IN-
4
IN-
EL5262
(10-PIN MSOP)
TOP VIEW
EL5263
EL5362
(8-PIN SO, MSOP)
(16-PIN SO (0.150”), QSOP)
TOP VIEW
TOP VIEW
OUT
IN-
1
2
3
4
5
10 VS+
OUT1
IN-
1
2
3
4
8
7
6
5
VS+
OUT2
IN-
INA+
CEA
VS-
1
2
3
4
5
6
7
8
16 INA-
15 OUTA
14 VS+
-
9
8
7
6
OUT
IN-
-
+
-
+
+
IN+
VS-
CE
IN+
-
-
+
+
+
-
IN+
CE
VS-
IN+
CEB
INB+
NC
13 OUTB
12 INB-
11 NC
+
-
CEC
INC+
10 OUTC
9
INC-
FN7388.7
September 8, 2005
3
EL5162, EL5163, EL5262, EL5263, EL5362
Absolute Maximum Ratings (T = 25°C)
A
Supply Voltage between V + and V -. . . . . . . . . . . . . . . . . . . 13.2V
Maximum Voltage between IN+ and IN-, disabled. . . . . . . . . . ±1.5V
Current into IN+, IN-, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5mA
S
S
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 50mA
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .125°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Pin Voltages. . . . . . . . . . . . . . . . . . . . . . . . .V - - 0.5V to V + +0.5V
S
S
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Slewrate of V + to V -. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1V/µs
S
S
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T = T = T
A
J
C
Electrical Specifications V + = +5V, V - = -5V, R = 750Ω for A = 1, R = 400Ω for A = 2, R = 150Ω, T = 25°C unless otherwise
S
S
F
V
F
V
L
A
specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
AC PERFORMANCE
BW
-3dB Bandwidth
A
= +1, R = 500Ω, R = 598Ω
500
233
30
MHz
MHz
MHz
V/µs
V
L
F
A
= +2, R = 150Ω, R = 422Ω
L F
V
BW1
SR
0.1dB Bandwidth
Slew Rate
V
= -2.5V to +2.5V, A = +2, R = 100Ω
2000
2800
2500
4000
6000
O
V
L
(EL5262, EL5263, EL5362)
V
= -2.5V to +2.5V, A = +2, R = 100Ω
4000
V/µs
O
V
L
(EL5162, EL5163)
= -2.5V to +2.5V, A = +1
t
0.1% Settling Time
V
25
3
ns
nV/√Hz
pA/√Hz
pA/√Hz
%
S
OUT
V
e
Input Voltage Noise
IN- Input Current Noise
IN+ Input Current Noise
N
i -
10
N
i +
N
6.5
0.05
0.15
dG
dP
Differential Gain Error (Note 1)
Differential Phase Error (Note 1)
A = +2
V
A
= +2
°
V
DC PERFORMANCE
V
Offset Voltage
-5
1.5
6
+5
mV
OS
T V
Input Offset Voltage Temperature
Coefficient
Measured from T
MIN
to T
MAX
µV/°C
C
OS
R
Transimpedance
500
1000
kΩ
OL
INPUT CHARACTERISTICS
CMIR
Common Mode Input Range
Guaranteed by CMRR test
= ±3V
±3
50
-1
±3.3
62
V
dB
CMRR
-ICMR
Common Mode Rejection Ratio
- Input Current Common Mode Rejection
+ Input Current
V
75
+1
+8
+10
3
IN
0.22
0.5
2
µA/V
µA
+I
-8
IN
-I
- Input Current
-10
0.8
µA
IN
R
Input Resistance
1.6
1
MΩ
pF
IN
IN
C
Input Capacitance
OUTPUT CHARACTERISTICS
V
Output Voltage Swing
Output Current
R = 150Ω to GND
±3.35
±3.75
60
±3.6
±3.9
100
±3.75
±4.15
V
V
O
L
R = 1kΩ to GND
L
I
R = 10Ω to GND
mA
OUT
L
FN7388.7
4
September 8, 2005
EL5162, EL5163, EL5262, EL5263, EL5362
Electrical Specifications V + = +5V, V - = -5V, R = 750Ω for A = 1, R = 400Ω for A = 2, R = 150Ω, T = 25°C unless otherwise
S
S
F
V
F
V
L
A
specified. (Continued)
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
SUPPLY
I
I
I
Supply Current - Enabled, per Amplifier No load, V = 0V
IN
1.3
-25
0
1.5
-14
10
1.7
0
mA
µA
SON
Supply Current - Disabled, per Amplifier No load, V = 0V
IN
SOFF-
SOFF+
+25
µA
PSRR
-IPSR
Power Supply Rejection Ratio
DC, V = ±4.75V to ±5.25V
65
76
dB
S
- Input Current Power Supply Rejection DC, V = ±4.75V to ±5.25V
-0.5
0.1
+0.5
µA/V
S
ENABLE (EL5162, EL5262, EL5362 ONLY)
t
t
I
I
Enable Time
380
800
5
ns
ns
µA
µA
V
EN
Disable Time
DIS
CE Pin Input High Current
CE Pin Input Low Current
CE Input High Voltage for Power-down
CE Input Low Voltage for Power-down
CE = V +
1
25
+1
IHCE
ILCE
S
CE = (V +) -5V
-1
0
S
V
V
V + - 1
S
IHCE
ILCE
V + - 3
V
S
NOTE:
1. Standard NTSC test, AC signal amplitude = 286mV , f = 3.58MHz
P-P
FN7388.7
5
September 8, 2005
EL5162, EL5163, EL5262, EL5263, EL5362
Typical Performance Curves
+4
+3
+2
+1
0
+4
+3
+2
+1
0
V
V
= +5V
= -5V
V
V
= +5V
= -5V
CC
EE
CC
EE
R
= 375Ω
R
R
= 500Ω
= 598Ω
F
L
F
-1
-2
-3
-4
-5
-6
-1
-2
-3
-4
-5
-6
100K
1M
10M
100M
1G
100K
1M
10M
100M
1G
FREQENCY (Hz)
FREQUENCY (Hz)
FIGURE 1. FREQUENCY RESPONSE FOR A = +1
V
FIGURE 2. FREQUENCY RESPONSE FOR A = +4.6
V
+3
+2
+1
0
+2
+1
0
-1
-2
-3
-4
-1
-2
-3
-4
V
V
= +5V
= -5V
CC
EE
-5
-6
-7
-8
V
V
= +5V
= -5V
CC
EE
-5
-6
-7
A
= +10
V
R
R
= 150Ω
= 422Ω
L
F
R
R
= 150Ω
= 375Ω
L
F
100K
1M
10M
100M
1G
100K
1M
10M
100M
1G
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 3. FREQUENCY RESPONSE FOR A = +10
V
FIGURE 4. FREQUENCY RESPONSE FOR A = +2
V
+5
+3
+2
+1
0
A
= +1
V
+4
+3
+2
+1
0
R
R
= 150Ω
= 698Ω
L
F
±6V
-1
-2
-3
-1
-2
-3
-4
-5
V
, V
=
±5V
±4V
CC EE
-4
-5
-6
-7
V
V
= +5V
= -5V
CC
EE
±3V
±2.5V
R
R
= 150Ω
= 422Ω
L
F
1M
10M
100M
500M
100K
100K
1M
10M
100M
1G
FREQUENCY (Hz)
FREQUENCY (Hz)
FIGURE 5. FREQUENCY RESPONSE FOR A = +4
V
FIGURE 6. FREQUENCY RESPONSE FOR VARIOUS V , V
CC EE
FN7388.7
6
September 8, 2005
EL5162, EL5163, EL5262, EL5263, EL5362
Typical Performance Curves (Continued)
100
10
1
V
V
= +5V
= -5V
CC
EE
V
V
= +5V
= -5V
CC
EE
INPUT RISE TIME
1.028ns
A
= +2
V
A
= +2
V
R
= 150Ω
1V/DIV
L
OUTPUT RISE
TIME 2.218ns
2V/DIV
0.1
10K
100K
1M
10M
100M
4ns/DIV
FREQUENCY (Hz)
FIGURE 7. CLOSED LOOP OUTPUT IMPEDANCE
FIGURE 8. EL5262 OUTPUT RISE TIME
V
V
= +5V
= -5V
CC
EE
CH 1
CH 2
A
= +2
V
INPUT FALL
TIME 1.036ns
1V/DIV
R
= 150Ω
L
OUTPUT FALL
TIME 2.21ns
2V/DIV
CH 1 = 5V
CH 2 = 200mV
M = 100ns
4ns/DIV
100ns/DIV
FIGURE 9. EL5262 OUTPUT FALL TIME
FIGURE 10. TURN ON TIME
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
V
V
= +5V
= -5V
CC
EE
CH 1 = 5V
CH 2 = 200mV
M = 100ns
A
= +2
V
R
= 150Ω
L
CH 1
CH 2
100
1K
10K
100K
1M
10M
100M
100ns/DIV
FREQUENCY (Hz)
FIGURE 11. TURN OFF TIME
FIGURE 12. PSRR (V
)
CC
FN7388.7
September 8, 2005
7
EL5162, EL5163, EL5262, EL5263, EL5362
Typical Performance Curves (Continued)
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
0
1.4
1.2
1
V
V
= +5V
= -5V
CC
EE
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
1.250W
A
= +2
V
SO16 (0.150”)
R
= 150Ω
L
θ
=80°C/W
JA
909mW
0.8
0.6
0.4
0.2
0
SO8
θ
=110°C/W
JA
0
25
50
75 85 100
125
150
100
1K
10K
100K
1M
10M
100M
FREQUENCY (Hz)
AMBIENT TEMPERATURE (°C)
FIGURE 13. PSRR (V
)
FIGURE 14. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
EE
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
0.5
0.45
0.4
0.35
0.3
0.25
0.2
0.15
0.1
0.05
0
1.4
435mW
1.2
1
893mW
SOT23-5/6
=230°C/W
θ
JA
0.8
0.6
0.4
0.2
0
QSOP16
θ
=112°C/W
JA
0
25
50
75 85 100
125
150
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
FIGURE 15. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FIGURE 16. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
JEDEC JESD51-7 HIGH EFFECTIVE THERMAL
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1
0.9
CONDUCTIVITY TEST BOARD
1
0.9
870mW
909mW
625mW
SO16 (0.150”)
=110°C/W
0.8
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
θ
JA
MSOP8/10
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
θ
=115°C/W
JA
SO8
θ
=160°C/W
JA
0
25
50
75 85 100
125
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
FIGURE 17. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FIGURE 18. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FN7388.7
September 8, 2005
8
EL5162, EL5163, EL5262, EL5263, EL5362
Typical Performance Curves (Continued)
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1.2
1
0.45
0.4
391mW
0.35
0.3
0.8
0.6
0.4
0.2
0
SOT23-5/6
JA
633mW
θ
=256°C/W
0.25
0.2
QSOP16
JA
θ
=158°C/W
0.15
0.1
0.05
0
0
25
50
75 85 100
125
150
0
25
50
75 85 100
125
150
AMBIENT TEMPERATURE (°C)
AMBIENT TEMPERATURE (°C)
FIGURE 19. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
FIGURE 20. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
0.6
486mW
0.5
MSOP8/10
JA
0.4
0.3
0.2
0.1
0
θ
=206°C/W
0
25
50
75 85 100
125
AMBIENT TEMPERATURE (°C)
FIGURE 21. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN7388.7
9
September 8, 2005
相关型号：
©2020 ICPDF网 联系我们和版权申明