HFA1115MJ/883 [INTERSIL]
High Speed, Low Power, Output Limiting Closed Loop Buffer Amplifier; 高速,低功耗,输出限制闭环缓冲放大器型号: | HFA1115MJ/883 |
厂家: | Intersil |
描述: | High Speed, Low Power, Output Limiting Closed Loop Buffer Amplifier |
文件: | 总5页 (文件大小:532K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM
HFA1115/883
High Speed, Low Power, Output Limiting
Closed Loop Buffer Amplifier
July 1994
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
The HFA1115/883 is a high speed closed loop Buffer featur-
ing both user programmable gain and output limiting. Manu-
factured in Intersil’ proprietary complementary bipolar UHF-1
process, the HFA1115/883 also offers a wide -3dB band-
width of 225MHz, very fast slew rate, excellent gain flatness
and high output current.
• User Programmable Output Voltage Limiting
• User Programmable For Closed-Loop Gains of +1, -1
or +2 Without Use of External Resistors
This buffer is the ideal choice for high frequency applications
requiring output limiting, especially those needing ultra fast
overload recovery times. The limiting function allows the
designer to set the maximum positive and negative output lev-
els, thereby protecting later stages from damage or input satu-
ration. The HFA1115/883 also allows for voltage gains of +2,
+1, and -1, without the use of external resistors. Gain selec-
tion is accomplished via connections to the inputs, as
described in the “Application Information” text. The result is a
more flexible product, fewer part types in inventory, and more
efficient use of board space.
• Standard Operational Amplifier Pinout
• Fast Overdrive Recovery . . . . . . . . . . . . . . . <1ns (Typ)
• Low Supply Current. . . . . . . . . . . . . . . . . . 6.9mA (Typ)
• Excellent Gain Accuracy. . . . . . . . . . . . . . 0.99V/V (Typ)
• Wide -3dB Bandwidth . . . . . . . . . . . . . . . 225MHz (Typ)
• Fast Slew Rate . . . . . . . . . . . . . . . . . . . . 1135V/µs (Typ)
• High Input Impedance . . . . . . . . . . . . . . . . . . 1MΩ (Typ)
• Excellent Gain Flatness (to 50MHz) . . . . . ±0.1dB (Typ)
Compatibility with existing op amp pinouts provides flexibility to
upgrade low gain amplifiers, while decreasing component
count. Unlike most buffers, the standard pinout provides an
upgrade path should a higher closed loop gain be needed at a
future date.
Applications
• Flash A/D Driver
• Video Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• RF/IF Signal Processing
• Medical Imaging Systems
Ordering Information
TEMPERATURE
PART NUMBER
RANGE
PACKAGE
HFA1115MJ/883
-55oC to +125oC
8 Lead CerDIP
Pinout
HFA1115/883
(CERDIP)
TOP VIEW
350
NC
-IN
+IN
V-
1
2
3
4
8
7
6
5
VH
350
V+
-
+
OUT
VL
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Spec Number 511109-883
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
194
FN3724
Specifications HFA1115/883
Absolute Maximum Ratings
Thermal Information
Voltage Between V+ and V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
Voltage at Either Input Terminal. . . . . . . . . . . . . . . . . . . . . . V+ to V-
Output Current (Note 1) . . . . . . . . . . . . . . . . Short Circuit Protected
Output Current (50% Duty Cycle, Note 1) . . . . . . . . . . . . . . . . 60mA
Junction Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .> 2000V
Storage Temperature Range . . . . . . . . . . . . . .-65oC ≤ TA ≤ +150oC
Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300oC
Thermal Resistance
θJA
θJC
CerDIP Package . . . . . . . . . . . . . . . . . 115oC/W
Maximum Package Power Dissipation at +75oC
30oC/W
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.87W
Package Power Dissipation Derating Factor above +75oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating VSUPPLY (±VS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5V
Operating Temperature Range. . . . . . . . . . . . .-55oC ≤ TA ≤ +125oC
RL Š≥ 50Ω
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±5V, AV = +1, RSOURCE = 0Ω, RL = 100Ω, VOUT = 0V, Unless Otherwise Specified.
LIMITS
GROUP A
PARAMETERS
SYMBOL
CONDITIONS
VCM = 0V
SUBGROUPS
TEMPERATURE
+25oC
MIN
MAX
UNITS
mV
Output Offset Voltage
VOS
1
2, 3
1
-10
-20
42
10
20
-
+125oC, -55oC
+25oC
mV
Common Mode
Rejection Ratio
CMRR
∆VCM = ±1.8V
V+ = 3.2V, V- = -6.8V
V+ = 6.8V, V- = -3.2V
dB
2
+125oC
39
-
dB
∆VCM = ±1.2V
3
-55oC
39
-
dB
V+ = 3.8V, V- = -6.2V
V+ = 6.2V, V- = -3.8V
Power Supply
Rejection Ratio
PSRRP
∆VSUPPLY = ±1.8V
V+ = 6.8V, V- = -5V
V+ = 3.2V, V- = -5V
1
2
+25oC
45
42
-
-
dB
dB
+125oC
∆VSUPPLY = ±1.2V
V+ = 6.2V, V- = -5V
V+ = 3.8V, V- = -5V
3
-55oC
42
-
dB
PSRRN ∆VSUPPLY = ±1.8V
V+ = 5V, V- = -6.8V
1
2
+25oC
45
42
-
-
dB
dB
+125oC
V+ = 5V, V- = -3.2V
∆VSUPPLY = ±1.2V
V+ = 5V, V- = -6.2V
V+ = 5V, V- = -3.8V
3
-55oC
42
-
dB
Non-Inverting Input (+IN)
Current
IBSP
VCM = 0V
1
2, 3
1
+25oC
+125oC, -55oC
+25oC
-15
-25
-
15
25
µA
µA
+IN Current Common
Mode Sensitivity
CMSIBP
∆VCM = ±1.8V
V+ = 3.2V, V- = -6.8V
V+ = 6.8V, V- = -3.2V
1.25
2.85
µA/V
µA/V
2
+125oC
-
∆VCM = ±1.2V
3
-55oC
-
2.85
µA/V
V+ = 3.8V, V- = -6.2V
V+ = 6.2V, V- = -3.8V
+IN Resistance
+RIN
Note 2
1
+25oC
800
350
-
-
kΩ
kΩ
2, 3
+125oC, -55oC
Spec Number 511109-883
195
Specifications HFA1115/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: VSUPPLY = ±5V, AV = +1, RSOURCE = 0Ω, RL = 100Ω, VOUT = 0V, Unless Otherwise Specified.
LIMITS
MIN
GROUP A
SUBGROUPS
PARAMETERS
SYMBOL
CONDITIONS
AV = +1
TEMPERATURE
+25oC
MAX
1.02
1.025
-1.02
-1.025
2.04
2.05
-
UNITS
V/V
V/V
V/V
V/V
V/V
V/V
V
Gain
AVP1
1
2, 3
1
0.98
0.975
-0.98
-0.975
1.96
1.95
3
VIN = -1V to +1V
+125oC, -55oC
+25oC
AVM1
AV = -1
IN = -1V to +1V
V
2, 3
1
+125oC, -55oC
+25oC
AVP2
AV = +2
IN = -1V to +1V
V
2, 3
1
+125oC, -55oC
+25oC
Output Voltage Swing
Output Voltage Swing
VOP100
VON100
VOP50
AV = -1
RL = 100Ω
VIN = -3.2V
VIN = -3V
2, 3
1
+125oC, -55oC
+25oC
2.8
-
-
V
AV = -1
RL = 100Ω
VIN=+3.2V
VIN = +3V
VIN = -2.7V
VIN = -2.25V
-3
V
2, 3
1
+125oC, -55oC
+25oC
-
-2.8
-
V
AV = -1
RL = 50Ω
2.5
2.0
1.4
-
V
2
+125oC
-
V
V
IN = -2.25V
3
-55oC
-
V
VON50
AV = -1
VIN = +2.7V
1
+25oC
-2.5
-2.0
V
RL = 50Ω
VIN = +2.25
V
2
+125oC
-
V
V
V
IN = +2.25
3
-55oC
-
-1.4
V
Output Current
+IOUT
Note 3
Note 3
1
2
+25oC
+125oC
50
40
-
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mV
mV
mV
mV
µA
-
3
-55oC
28
-
-IOUT
1
+25oC
-
-50
-40
-28
7.1
7.5
-6.6
-6.2
125
125
125
125
200
200
-
2
+125oC
-
3
-55oC
-
Quiescent Power
Supply Current
ICC
RL = 100Ω
RL = 100Ω
1
+25oC
6.6
6.2
-7.1
-7.5
-125
-125
-125
-125
-
2, 3
1
+125oC, -55oC
+25oC
IEE
2, 3
1
+125oC, -55oC
+25oC
Clamp Accuracy
VHCLMP AV = -1, VIN = -1.6V
H = 1V
V
2, 3
1
+125oC, -55oC
+25oC
VLCLMP AV = -1, VIN = +1.6V
VL = -1V
2, 3
1
+125oC, -55oC
+25oC
Clamp Input Current
VHBIAS VH = 1V
2, 3
1
+125oC, -55oC
+25oC
-
µA
VLBIAS
VL = -1V
-200
-200
µA
2, 3
+125oC, -55oC
-
µA
Spec Number 511109-883
196
Specifications HFA1115/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: VSUPPLY = ±5V, AV = +1, RSOURCE = 0Ω, RL = 100Ω, VOUT = 0V, Unless Otherwise Specified.
LIMITS
MIN MAX
GROUP A
SUBGROUPS
PARAMETERS
NOTES:
SYMBOL
CONDITIONS
TEMPERATURE
UNITS
1. Output is short circuit protected to ground. Brief short circuits to ground will not degrade reliability, however continuous (100% duty cycle)
output current must not exceed 30mA for maximum reliability.
2. Guaranteed from +IN Common Mode Rejection Test, by: +RIN = 1/CMSIBP
.
3. Guaranteed from VOUT Test with RL = 50Ω, by: IOUT = VOUT/50Ω.
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
TABLE 4. ELECTRICAL TEST REQUIREMENTS
Table 2 Intentionally Left Blank.
Table 3 Intentionally Left Blank.
MIL-STD-883 TEST REQUIREMENTS
SUBGROUPS (SEE TABLE 1)
Interim Electrical Parameters (Pre Burn-In)
Final Electrical Test Parameters
Group A Test Requirements
1
1 (Note 1), 2, 3
1, 2, 3
Groups C and D Endpoints
1
NOTE:
1. PDA applies to Subgroup 1 only.
Spec Number 511109-883
197
HFA1115/883
Die Characteristics
DIE DIMENSIONS:
59 x 58.2 x 19 mils ± 1 mils
1500 x 1480 x 483µm ± 25.4µm
METALLIZATION:
Type: Metal 1: AICu(2%)/TiW
Thickness: Metal 1: 8kÅ ± 0.4kÅ
Type: Metal 2: AICu(2%)
Thickness: Metal 2: 16kÅ ± 0.8kÅ
GLASSIVATION:
Type: Nitride
Thickness: 4kÅ ± 0.5kÅ
WORST CASE CURRENT DENSITY:
TBD
TRANSISTOR COUNT: 89
SUBSTRATE POTENTIAL (Powered Up): Floating (Recommend Connection to V-)
Metallization Mask Layout
HFA1115/883
-IN
VH
V+
OUT
+IN
V-
VL
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.
Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reli-
able. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may
result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Spec Number 511109-883
198
相关型号:
©2020 ICPDF网 联系我们和版权申明