TS-SG-01-10.0 [IRONWOOD]

To be used with swivel lid sockets;


型号：	TS-SG-01-10.0
厂家：	IRONWOOD ELECTRONICS.
描述：	To be used with swivel lid sockets
文件：	总1页 (文件大小：81K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TS-SG-01-X.X Drawing

Note: Screw needs to be calibrated for a specific

torque.

Use part numbers shown in the table below to

order appropriate screw

Ordering

Top View

Information

Part Number

TS-SG-01-3.0

TS-SG-01-3.5

Torque (in. lbs)

3.0

3.5

4.0

TS-SG-01-4.0

TS-SG-01-4.5

TS-SG-01-5.0

44.7

4.5

5.0

5.5

6.0

Ø 36

TS-SG-01-5.5

TS-SG-01-6.0

TS-SG-01-6.5

6.5

7.0

7.5

8.0

TS-SG-01-7.0

TS-SG-01-7.5

TS-SG-01-8.0

TS-SG-01-8.5

22.27mm

8.5

9.0

Side View

TS-SG-01-9.0

TS-SG-01-9.5

TS-SG-01-10.0

9.5

Laser Mark

10.0

M18x1.5x6g.

Compression Screw Top: Clear anodized

Aluminum.

Compression Screw Bottom: Black anodized

Aluminum M18 x1.5x6g Thread. 5mm Thread ht.

Description: Torque Indicating Screw

Torque screw for 3 in lbs -10 in lbs

To be used with swivel lid sockets.

Compression screw needs to be turned clockwise up to the point where

the arrow on top of the compression screw aligns with laser mark on the

compression screw bottom.

Swivel lid socket with Torque

Indicating Screw

Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.

Scale: N/A

Date: 5/7/08

Status: Released

Drawing: Vinayak R

File: TS-SG-01-X_X Dwg

Rev: C

TS-SG-01-X.X Drawing

Tele: (952) 229-8200

www.ironwoodelectronics.com

Modified: 01/07/10