概述
数据手册F2G18 概述
SAW Bandpass Filter F2G18 SAW带通滤波器F2G18
F2G18 数据手册
通过下载F2G18数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载SAW Bandpass Filter F2G18
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
TDSCDMA applications
Usable bandwidth of 15 MHz
No impedance matching require for operation at 50 Ω
Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm )
Single-ended Operation
RoHS Compliant
Package Dimensions
1
6
5
4
6
5
4
1
2
3
I
2
2G18
3
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
5
Input
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameters
Unit
℃
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
-30
-40
-
25
-
85
85
10
℃
Power Handling Capability
dBm
-
Electrostatics Sensitive Device (ESD)
Part No.
F2G18
2009-11-12
NC9015-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Rev. Date
Rev.
1/7
SAW Bandpass Filter F2G18
Specifications
Minimum
Typical
2017.5
2.9
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
-
-
-
-
-
Insertion Loss (In Fc +/- 7.5 MHz)
Amplitude Ripple (In Fc +/- 7.5 MHz)
VSWR (In Fc +/- 7.5 MHz)
4.0
1.5
2.5
0.5
dBp-p
2.0
Relative Attenuation
DC ~ 1200.0 MHz
40.0
30.0
20.0
6.0
48.0
35.0
30.0
17.0
35.0
30.0
-
-
-
-
-
1200.0 MHz ~ 1860.0 MHz
1920.0 MHz ~ 1980.0 MHz
2045.0 MHz ~ 2070.0 MHz
2070.0 MHz ~ 2300.0 MHz
2300.0 MHz ~ 3000.0 MHz
dB
30.0
25.0
℃
Temperature Range (Operational)
Input RF Power (In Fc +/- 7.5 MHz)
Input/Output Impedance
-30
25
50
85
10
dBm
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
Part No.
Rev. Date
Rev.
F2G18
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2009-11-12
NC9015-AS01
2/7
SAW Bandpass Filter F2G18
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
Output
50
50
Ω
Ω
Marking Configuration
1)
I2)
2G183)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
Part No.
Rev. Date
Rev.
F2G18
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2009-11-12
NC9015-AS01
3/7
SAW Bandpass Filter F2G18
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
F2G18
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2009-11-12
NC9015-AS01
4/7
SAW Bandpass Filter F2G18
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
F2G18
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2009-11-12
NC9015-AS01
5/7
SAW Bandpass Filter F2G18
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~15 degree
Carrier tape
Part No.
Rev. Date
Rev.
F2G18
2009-11-12
NC9015-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
6/7
SAW Bandpass Filter F2G18
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
3.40 ± 0.1
3.40 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
F2G18
2009-11-12
NC9015-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
7/7
F2G18 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| F2G1A | ITF | SAW Bandpass Filter F2G1A | 获取价格 |
|
| F2G1B | ITF | SAW Bandpass Filter F2G1B | 获取价格 |
|
| F2G21 | ITF | SAW Bandpass Filter F2G21 | 获取价格 |
|
| F2G22 | ITF | SAW Bandpass Filter F2G22 | 获取价格 |
|
| F2G23 | ITF | SAW Bandpass Filter F2G23 | 获取价格 |
|
| F2G34 | ITF | SAW Bandpass Filter F2G34 | 获取价格 |
|
| F2G37 | ITF | SAW Bandpass Filter F2G37 | 获取价格 |
|
| F2G51 | ITF | SAW Bandpass Filter F2G51 | 获取价格 |
|
| F2G52 | ITF | SAW Bandpass Filter F2G52 | 获取价格 |
|
| F2G62 | ITF | SAW Bandpass Filter F2G62 | 获取价格 |
|
F2G18 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
