F6961 [ITF]
SAW Bandpass Filter F6961; SAW带通滤波器F6961型号: | F6961 |
厂家: | INTEGRATED TECHNOLOGY FUTURE |
描述: | SAW Bandpass Filter F6961 |
文件: | 总8页 (文件大小:185K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAW Bandpass Filter F6961
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
RF bandpass filter
High attenuation
No matching 50Ω single-ended operation
Ceramic Surface Mounted Device (SMD) Package
RoHS Compliant
Package Dimensions
3.80± 0.15
1.00± 0.1
1.90± 0.1
1
6
5
4
6
5
4
1
2
3
ITF
6961
2
3
Dimensions shown are nominal in millimeters
Pin Configuration
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
5
Input
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameter
Unit
°C
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
-40
-40
-
25
25
-
85
85
10
°C
Power Handling Capability
dBm
Electrostatics Sensitive Device (ESD)
Part No.
F6961
2012-09-27
NSNI03-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Rev. Date
Rev.
1/8
SAW Bandpass Filter F6961
Specifications
Fc = 696 MHz
Minimum
Typical
696
2.5
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
-
-
-
-
-
-
-
4.0
1.0
-
Insertion Loss (694 ~ 698 MHz)
Amplitude Ripple (694 ~ 698 MHz)
Absolute Group Delay (Fc)
0.5
dBp-p
nsec
nsec
100
50
Group Delay Variation (694 ~ 698 MHz)
VSWR (694 ~ 698 MHz)
-
1.5
2.0
Relative Attenuation
0.3 ~ 672 MHz
40
40
35
30
50
50
45
40
-
-
-
-
715 ~ 1100 MHz
1100 ~ 1500 MHz
1500 ~ 2500 MHz
dB
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
Part No.
Rev. Date
Rev.
F6961
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-09-27
NSNI03-AS01
2/8
SAW Bandpass Filter F6961
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
Output
50
50
Ω
Ω
Marking Configuration
ITF1)
69612)
1) Manufacturer name
2) Marking Number
Part No.
Rev. Date
Rev.
F6961
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-09-27
NSNI03-AS01
3/8
SAW Bandpass Filter F6961
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
F6961
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-09-27
NSNI03-AS01
4/8
SAW Bandpass Filter F6961
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
F6961
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-09-27
NSNI03-AS01
5/8
SAW Bandpass Filter F6961
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
F6961
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
2012-09-27
NSNI03-AS01
6/8
SAW Bandpass Filter F6961
Packing Specification
1. Reeling Quantity : 1000 pcs / reel
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~ 15 degree
Carrier tape
Part No.
Rev. Date
Rev.
F6961
2012-09-27
NSNI03-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
7/8
SAW Bandpass Filter F6961
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
4.30 ± 0.1
4.30 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
F6961
2012-09-27
NSNI03-AS01
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
8/8
相关型号:
©2020 ICPDF网 联系我们和版权申明