F8471 [ITF]
SAW Bandpass Filter F8471; SAW带通滤波器F8471型号: | F8471 |
厂家: | INTEGRATED TECHNOLOGY FUTURE |
描述: | SAW Bandpass Filter F8471 |
文件: | 总7页 (文件大小:219K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAW Bandpass Filter F8471
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
RF bandpass filter
High attenuation
No matching 50ꢀ single-ended operation
Ceramic Surface Mounted Device (SMD) Package ( 3.0 mm * 3.0 mm )
RoHS Compliant
Package Dimensions
1
2
3
6
5
4
6
5
4
1
2
3
Pin Configuration
Dimensions shown are nominal in millimeters
2
5
Input
Output
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
1, 3, 4, 6
Case ground
Maximum Ratings
Parameter
Unit
℃
Minimum
Typical
25
Maximum
Operating Temperature Range
Storage Temperature Range
-40
-30
-
85
85
-
℃
25
Power Handling Capability
dBm
10
Electrostatics Sensitive Device (ESD)
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
1/7
SAW Bandpass Filter F8471
Specifications
Fc = 847 MHz
Terminating source impedance : 50ꢀ
Terminating load impedance
: 50ꢀ
Minimum
Typical
847
2.5
Maximum
Unit
MHz
dB
Center Frequency ( Fc )
-
-
-
-
-
Insertion Loss (In Fc +/-15 MHz)
Amplitude Ripple (In Fc +/- 15 MHz)
VSWR (In Fc +/- 15 MHz)
4.5
2.0
2.5
0.7
dBp-p
1.6
Relative Attenuation
800 ~ 815 MHz
815 ~ 821 MHz
940 ~ 1500 MHz
30
10
45
50
34
57
-
-
-
dB
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
2/7
SAW Bandpass Filter F8471
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
2)
1) Manufacturer name
2) Marking Number
* Ink or Laser Marking available
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
3/7
SAW Bandpass Filter F8471
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
4/7
SAW Bandpass Filter F8471
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
5/7
SAW Bandpass Filter F8471
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~15 degree
Carrier tape
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
6/7
SAW Bandpass Filter F8471
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
3.40 ± 0.1
3.40 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
NCNA02-F8471
2012-1-3
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
7/7
相关型号:
©2020 ICPDF网 联系我们和版权申明